Publikationsliste


Customized production of highly integrated 3D power electronic modules by multi-material vat photopolymerization, powder bed fusion and selective piezojet metallization [MultiPower] (Poster)
Schubert, J.; Lehmann, C.-L.; Zanger, F.; Schulze, V.; Utsch, D.; Thielen, N.; Franke, J.
2023, June. 15th Internationaler MID-Kongress - Mechatronic Integrated Discourse (2023), Amberg, Germany, June 21–22, 2023
AM: Hohe Relevanz der Feedstock-Charakterisierung
Lubkowitz, V.; Schubert, J.; Zanger, F.
2023. EMO Hannover Journal, 2023 (1), S56-S58
Potentials and Challenges of Multi-Material Additive Manufacturing of Ceramics by Vat Photopolymerization
Schubert, J.; Lehmann, C.-L.; Schulze, V.; Zanger, F.
2023. Ceramic Applications, 11 (3), 12–16
Application of Bayesian Optimization for the optimized development of slurries for Additive Manufacturing
Schubert, J.; Friederich, P.; Burchard, B.; Zanger, F.
2023, November 23. (T. Dahmen, T. Bernthaler, D. Britz & M. Stricker, Eds.), 1st Conference on Artificial Intelligence in Materials Science and Engineering (AI MSE 2023), Saarbrücken, Germany, November 22–23, 2023
Influence of TiC-Nanoparticles on the material properties of AlSi10Mg manufactured by Laser Powder Bed Fusion
Lubkowitz, V.; Scherer, T.; Schulze, V.; Zanger, F.
2024. J. Beaman, D. Leigh, D. Kovar, C. Seepersad, M. Cullinan, M. Tehrani, Z. Sha & D. Bourell (Eds.), 34rd Annual International SOLID FREEFORM FABRICATION SYMPOSIUM (SFF2023) Hrsg.: Beaman, Joe; Leigh, David; Kovar, Desiderio; Seepersad, Carolyn; Cullinan, Michael; Tehrani, Mehran; Sha, Zhenghui; Bourell, Dave, 514–524, Minerals, Metals and Materials Society (TMS)
Concept for Individual and Lifetime-Adaptive Modeling of the Dynamic Behavior of Machine Tools
Oexle, F.; Heimberger, F.; Puchta, A.; Fleischer, J.
2024. Machines, 12 (2), Art.-Nr.: 123. doi:10.3390/machines12020123
Evaluation of external control of KUKA Industrial Robots for laboratory and prototype environments
Mehner, M.; Matkovic, N.; Muehlbeier, E.; Mayer, D.; Fleischer, J.; Verl, A.
2023. A. Verl & W. Kraus (Eds.), ISR Europe 2023: 56th International Symposium on Robotics, Stuttgart, 26th-27th September 2023, Hrsg.: Verl, Alexander; Kraus, Werner, 278–284, VDE Verlag
Methodology for the characterization and understanding of longitudinal wrinkling during calendering of lithium-ion and sodium-ion battery electrodes
Wurba, A.-K.; Klemens, J.; Mayer, D.; Reusch, C.; Altmann, L.; Leonet, O.; Blázquez, J. A.; Boyano, I.; Ayerbe, E.; Scharfer, P.; Schabel, W.; Fleischer, J.
2024. (K. Mpofu, N. Sacks & O. Damm, Eds.) 56th CIRP Conference on Manufacturing Systems, CIRP CMS ‘23, South Africa Hrsg.: Mpofu, Khumbulani; Sacks, Natasha; Damm, Oliver, 120, 314–319. doi:10.1016/j.procir.2023.08.056
A systematic approach for simulation-based dimensioning of production systems during the concept phase of factory planning
Schäfer, L.; Klenk, F.; Maier, T.; Zehner, M.; Peukert, S.; Linzbach, R.; Treiber, T.; Lanza, G.
2024. Production Engineering. doi:10.1007/s11740-024-01273-3
“Autonomous control of gap distance and angel of attack in slot-die coating”
Denk, F.; Schabel, S.; Hoffmann, A.; Scharfer, P.; Schabel, W.; Fleischer, J.
2024. Procedia CIRP, 121, 133 – 137. doi:10.1016/j.procir.2023.09.240
Framework for automatic production simulation tuning with machine learning
May, M. C.; Finke, A.; Theuner, K.; Lanza, G.
2024. Procedia CIRP, 121, 49 – 54. doi:10.1016/j.procir.2023.11.002
Selective disassembly planning considering process capability and component quality utilizing reinforcement learning
Tabar, R. S.; Magnanini, M. C.; Stamer, F.; May, M. C.; Lanza, G.; Wärmefjord, K.; Söderberg, R.
2024. Procedia CIRP, 121, 1 – 6. doi:10.1016/j.procir.2023.09.221
Classification of the machine state in turning processes by using the acoustic emission
Diaz Ocampo, D.; Aubart, D.; González, G.; Zanger, F.; Heizmann, M.
2024. Production Engineering. doi:10.1007/s11740-024-01266-2
Tactical Order Allocation in International Manufacturing Networks; [Taktische Auftragsallokation in globalen Produktionsnetzwerken.]
Martin, M.; Hörger, M.; Lanza, G.
2024. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 119 (1-2), 17 – 22. doi:10.1515/zwf-2024-1003
Current Topics in International Manufacturing Implications from Industrial Use-Cases; [Aktuelle Themen der globalen Produktion – Implikationen von industriellen Anwendungsfällen.]
Gleich, K.; Steier, G. L.; Kaiser, J.; Specht, F.; Lanza, G.
2024. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 119 (1-2), 6 – 11. doi:10.1515/zwf-2024-1001
Generalizability of an Identification Approach for Machine Control Signals in Brownfield Production Environments
Gönnheimer, P.; Ströbel, R.; Dörflinger, R.; Mattes, M.; Alexander, P.; Wuest, T.; Fleischer, J.
2023. Procedia CIRP, 120, 649 – 654. doi:10.1016/j.procir.2023.09.053
Strategic fit in global production networks – A decision support model for strategic configuration of global production networks
Steier, G. L.; Jaspers, M.-C.; Peukert, S.; Benfer, M.; Lanza, G.
2023. Procedia CIRP, 120, 1059 – 1064. doi:10.1016/j.procir.2023.09.125
Applying frequency based forecasting for resource allocation
May, M. C.; Kiefer, L.; Frey, A.; Duffie, N. A.; Lanza, G.
2023. Procedia CIRP, 120, 147 – 152. doi:10.1016/j.procir.2023.08.027
Simulation of the stacking process in battery cell manufacturing
Mayer, D.; Maier, T.; Fleischer, J.
2023. Procedia CIRP, 120, 1393 – 1397. doi:10.1016/j.procir.2023.09.182
Human-centered Digital Shopfloor Management Implementation and Acceptance Model
Kandler, M.; Seibert, C.; May, M. C.; Lanza, G.
2023. Procedia CIRP, 120, 1321 – 1326. doi:10.1016/j.procir.2023.09.170
Introduction of an industrial transfer learning use case systematization for machine tools
Netzer, M.; Michelberger, J.; Puchta, A.; Verl, A.; Fleischer, J.
2023. Procedia CIRP, 120, 398 – 403. doi:10.1016/j.procir.2023.09.009
Planning and Multi-Objective Optimization of Production Systems by means of Assembly Line Balancing
Schäfer, L.; Kochendörfer, P.; May, M. C.; Lanza, G.
2023. Procedia CIRP, 120, 1125 – 1130. doi:10.1016/j.procir.2023.09.136
Integrating Multiple Perspectives in Manufacturing Planning and Control: The Daydreaming Engine Approach
Benfer, M.; Brützel, O.; Overbeck, L.; Peukert, S.; Nassehi, A.; Lanza, G.
2023. Procedia CIRP, 120, 177–182. doi:10.1016/j.procir.2023.08.032
Adaptive Multi-Priority Rule Approach To Control Agile Disassembly Systems In Remanufacturing
Wurster, M.; Bail, F.; Behrendt, S.; Lanza, G.
2023. Proceedings of the 5th Conference on Production Systems and Logistics (CPSL-2). Ed.: D. Herberger, 782–792, publish-Ing. doi:10.15488/15278
Towards a Service-Oriented Architecture for Production Planning and Control: A Comprehensive Review and Novel Approach
Behrendt, S.; Stamer, F.; May, M. C.; Lanza, G.
2023. Proceedings of the 5th Conference on Production Systems and Logistics (CPSL-2). Ed.: D. Herberger, 255–267, publish-Ing. doi:10.15488/15271
Interoperable Architecture For Logical Reconfigurations Of Modular Production Systems
Behrendt, S.; Wurster, M.; Strljic, M.; Klein, J.-F.; May, M. C.; Lanza, G.
2023. Proceedings of the 5th Conference on Production Systems and Logistics (CPSL-2). Ed.: D. Herberger, 622–633, publish-Ing. doi:10.15488/15270
ChatGPT passes German state examination in medicine with picture questions omitted
Jung, L. B.; Gudera, J. A.; Wiegand, T. L. T.; Allmendinger, S.; Dimitriadis, K.; Koerte, I. K.
2023. Deutsches Ärzteblatt international, 120 (21-22), 373–374. doi:10.3238/arztebl.m2023.0113
Methodology for the Implementation of a Consistent Information Model for the Electric Drives Production
Klein, N.; Wirth, F.; Fleischer, J.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372155
Wave Spring-Based Magnet Fixations for Electric Traction Motors
Heim, M.; Wirth, F.; Boschert, L.; Acker, D.; Klein, N.; Fleischer, J.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November 2023, 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372158
Methodology for the Mechanical Characterization of Rectangular Winding Wire in the Context of Electric Mobility
Wirth, F.; Vitzthum, S.; Gerner, J.; Koprivc, A.; Hausmann, L.; Fleischer, J.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November 2023, 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372157
Calculation of Process Parameters for the Twisting of Stators with Hairpin Winding
Hausmann, L.; Wirth, F.; Fleischer, J.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November, 2023, 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372173
Approach for Flexible Gripping and Sequential Alignment of Hairpin Baskets
Fraider, F.; Wustmann, E.; Fleischer, J.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November 2023, 1–7, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372175
Closed-Loop Process Control for Sequential Tool-Bound Bending of Hairpin Coils
Wirth, F.; Fleischer, J.; Gerner, J.; Hausmann, L.
2024. 2023 13th International Electric Drives Production Conference (EDPC), Regensburg, 29th-30th November 2023, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC60603.2023.10372174
Automated model generation framework for material flow simulations of production systems
May, M. C.; Nestroy, C.; Overbeck, L.; Lanza, G.
2024. International Journal of Production Research, 62 (1-2), 141–156. doi:10.1080/00207543.2023.2284833
Soft sensor for in-line quality control of turning processes based on non-destructive testing techniques and advanced data fusion
Böttger, D.; González, G.; Geiser, A.; Kempf, D.; Lanza, G.; Schulze, V.; Wolter, B.
2024. Production Engineering. doi:10.1007/s11740-023-01254-y
A Model-Driven Digital Twin for Manufacturing Process Adaptation
Spaney, P.; Becker, S.; Ströbel, R.; Fleischer, J.; Zenhari, S.; Möhring, H.-C.; Splettstößer, A.-K.; Wortmann, A.
2023. 2023 ACM/IEEE International Conference on Model Driven Engineering Languages and Systems Companion (MODELS-C), Västerås, 1st-6th October 2023, 465 – 469, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/MODELS-C59198.2023.00081
Entscheidungsfaktoren der Produktionsnetzwerkkonfiguration/Decision factors in production network configuration
Steier, G.; Heusch, A.; Voigt, J.; Benfer, M.; Lanza, G.
2023. wt Werkstattstechnik online, 113 (10), 457–462. doi:10.37544/1436-4980-2023-10-79
Modeling machine-side influences on the Z-Folding process of battery cells
Husseini, K.; Boschert, L.; Schabel, S.; Fleischer, J.
2024. Production Engineering. doi:10.1007/s11740-023-01248-w
IIoT System Canvas — From architecture patterns towards an IIoT development framework
May, M. C.; Glatter, D.; Arnold, D.; Pfeffer, D.; Lanza, G.
2024. Journal of Manufacturing Systems, 72, 437 – 459. doi:10.1016/j.jmsy.2023.12.001
A Changeable Decision Support System Based on Data Models for Global Production Networks
Martin, M.; Benfer, M.; Peukert, S.; Lanza, G.
2023. Procedia CIRP, 120, 684–689. doi:10.1016/j.procir.2023.09.059
Sonderforschungsbereich 1574: Kreislauffabrik für das ewige innovative Produkt – Integrierte lineare und zirkuläre Produktion mittels hochvernetztem Produkt-Produktions-CoDesign
Lanza, G.; Klenk, F.; Martin, M.; Brützel, O.; Hörsting, R.
2023. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 118 (12), 820–825. doi:10.1515/zwf-2023-1164
Mechatronic Coupling System for Cooperative Manufacturing with Industrial Robots
Mühlbeier, E.; Bauer, V.; Schade, F.; Gönnheimer, P.; Becker, J.; Fleischer, J.
2024. 56th CIRP International Conference on Manufacturing Systems 2023 Hrsg.: Mpofu, Khumbulani; Sacks, Natasha; Damm, Oliver, 120, 744–749. doi:10.1016/j.procir.2023.09.069
Hochproduktives Innen-Polygondrehen in der Medizintechnik - Alternativer Schraubenantrieb effizient zerspant
Arndt, T.; Sellmeier, V.; Kiessling, W.-D.; Kanz, A.; Luik, M.; Schulze, V.
2023. wt Werkstattstechnik online, 113 (11-12), 550 – 556. doi:10.37544/1436-4980-2023-11-12-86
Modular Hardware/Software Architecture for Edge Units in Highly Flexible Manufacturing Systems
Schade, F.; Kreutzer, M.; Mühlbeier, E.; Gerlitz, E.; Gönnheimer, P.; Fleischer, J.; Becker, J.
2023. Procedia CIRP, 120, 601–606. doi:10.1016/j.procir.2023.09.045
AI-based inspection of the axes of machine tools
Demetgul, M.; Wang, W.; Fleischer, J.; Tansel, I. N.
2024. The International Journal of Advanced Manufacturing Technology, 130 (5-6), 2329–2342. doi:10.1007/s00170-023-12830-y
Collision avoidance and adaptive path planning in machine tools by matching live image data with a geometric simulation
Hansjosten, M.; Fleischer, J.; Frings, M.; Odendahl, S.; Stautner, M.
2023. Procedia CIRP, 118, 151–156. doi:10.1016/j.procir.2023.06.027
Disassembly Graph Generation and Sequence Planning Based on 3D Models for the Disassembly of Electric Motors
Hansjosten, M.; Fleischer, J.
2024. Production at the Leading Edge of Technology : Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. Ed.: T. Bauernhansl, 448–457, Springer Nature Switzerland. doi:10.1007/978-3-031-47394-4_44
Model-Based Diagnosis of Feed Axes with Contactless Current Sensing
Hansjosten, M.; Bott, A.; Puchta, A.; Gönnheimer, P.; Fleischer, J.
2023. M. Liewald, T. Bauernhansl, H.-C. Möhring & A. Verl (Eds.), Production at the Leading Edge of Technology: Proceedings of the 12th Concress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Hrsg.: Mathias Liewald, Thomas Bauernhansl, Hans-Christian Möhring, Alexander Verl, 314–323, Springer. doi:10.1007/978-3-031-18318-8_33
KI-Transferzentrum für die Industrie
Hansjosten, M.; Oexle, F.; Gönnheimer, P.; Heider, I.; Puchta, A.; Fleischer, J.
2023. wt Werkstattstechnik online
Reinforcement learning for sustainability enhancement of production lines
Loffredo, A.; May, M. C.; Matta, A.; Lanza, G.
2023. Journal of Intelligent Manufacturing. doi:10.1007/s10845-023-02258-2
CO reduction of resolved wall structures: A load-bearing capacity-based modularization and assembly approach
Stindt, J.; Frey, A. M.; Forman, P.; Mark, P.; Lanza, G.
2024. Engineering Structures, 300, Art.Nr.: 117197. doi:10.1016/j.engstruct.2023.117197
Enzyme Immobilization on Polypropylene Film: A Role Model for Biocatalytic Polymer Membranes?
Gartner, P.; Rudat, J.; Bilger, M.; Gruenert, T.; Lanza, G.
2023. Journal of Enzymes, 1 (3), 1–12. doi:10.14302/issn.2690-4829.jen-23-4799
Potential of Scanning-Strategy Adaptations for Producing Homogenous Microlattices by PBF-LB
Ulff, N.; Schubert, J.; Zanger, F.
2023. Production at the Leading Edge of Technology: Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. Ed.: T. Bauernhansl, 747–756, Springer Nature Switzerland. doi:10.1007/978-3-031-47394-4_73
Alternativer Schraubenantrieb effizient zerspant
Arndt, T.; Sellmeier, V.; Kiessling, W.-D.; Kanz, A.; Luik, M.; Schulze, V.
2023. Werkstattstechnik, 113 (11-12), 550–556. doi:10.37544/1436–4980–2023–11–12–86
Automated Identification of Components of Feed Axes
Puchta, A.; Frisch, M.; Fleischer, J.
2024. Production at the Leading Edge of Technology. Hrsg.: T. Bauernhansl, 143–151, Springer Nature Switzerland. doi:10.1007/978-3-031-47394-4_15
Increasing Robot Precision by Stroke Division
Baumgärtner, J.; Puchta, A.; Bertschinger, B.; Kanagalingam, G.; Sawodny, O.; Reichelt, S.; Fleischer, J.
2023. 2023 27th International Conference on Methods and Models in Automation and Robotics (MMAR), Międzyzdroje, Poland, 22-25 August 2023. Ed.: A. Bartoszewicz, 205–210, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/MMAR58394.2023.10242468
PyBullet Industrial: A process-aware robot simulation
Baumgärtner, J.; Hansjosten, M.; Schönhofen, D.; Fleischer, J.
2023. Journal of Open Source Software, 8 (85), Art.-Nr.: 5174. doi:10.21105/joss.05174
Camera Placement Optimization for a Novel Modular Robot Tracking System
Baumgärtner, J.; Bertschinger, B.; Hoffmann, K.; Puchta, A.; Sawodny, O.; Reichelt, S.; Fleischer, J.
2023. 2023 IEEE SENSORS, Vienna, Austria, 29 October 2023 - 01 November 2023, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/SENSORS56945.2023.10324941
Material Flow of an Agile Battery Cell Production System Based on Diffusion-Tight Transport Boxes and Driverless Transport Systems
Henschel, S.; Kößler, F.; Fleischer, J.
2024. T. Bauernhansl, A. Verl, M. Liewald & H.-C. Möhring (Eds.), Production at the Leading Edge of Technology : Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. Hrsg.: T. Bauernhansl, 550–558, Springer International Publishing. doi:10.1007/978-3-031-47394-4_53
Design concept of a repairable YASA axial flux machine with a hybrid cooling system
Schäfer, A.; Baranowski, M.; Springmann, M.; Hof, L.; Frölich, F.; Peter, A.; Parspour, N.; Fleischer, J.; Middendorf, P.; Kärger, L.; Michalowski, A.
2023. 12th International Conference on Power Electronics, Machines and Drives (PEMD 2023), 119–128, Institution of Engineering and Technology (IET). doi:10.1049/icp.2023.1987
A Quality Data Model Based on Asset Administration Shell Technology to Enable Autonomous Quality Control Loops
Bilen, A.; Stamer, F.; Behrendt, S.; Lanza, G.
2024. Production at the Leading Edge of Technology : Proceedings of the 13th Congress of the German Academic Association for Production Technology (WGP), Freudenstadt, November 2023. Ed.: T. Bauernhansl, 195–204, Springer Nature Switzerland. doi:10.1007/978-3-031-47394-4_20
Development of an ultrasonically excited recoating process in laser powder bed fusion to process non-spreadable 316L powder
Drechsel, K.; Lubkowitz, V.; Albrecht, L.; Schäfer, P.; Schneider, M.; Schulze, V.; Zanger, F.
2024. Powder Technology, 432, 119–153. doi:10.1016/j.powtec.2023.119153
Toleranzfreie Montage modularer Betontragwerke – Optimierung der Modulanordnung mit Metaheuristiken
Stindt, J.; Frey, A. M.; Forman, P.; Lanza, G.; Mark, P.
2023. Bautechnik, 659–726. doi:10.1002/bate.202300052
Reinforcement learning for energy-efficient control of multi-stage production lines with parallel machine workstations
Loffredo, A.; May, M. C.; Matta, A.
2023. Italian Manufacturing Association Conference, 428 – 436, Materials Research Forum LLC. doi:10.21741/9781644902714-51
Tooth Root Burnishing in the Kinematics of Gear Skiving: Investigation of a new process and tool concept
Fischmann, P.; Hilligardt, A.; Schulze, V.
2023. VDI Berichte, 2023 (2422), 1829 – 1844
Gear Skiving with Minimum Twist Errors: Modeling and Optimization of Flank Twist in Gear Skiving
Hilligardt, A.; Schulze, V.
2023. VDI-Berichte, 2023 (2422), 1749 – 1764
Production Planning Forecasting System Based on M5P Algorithms and Master Data in Manufacturing Processes
Song, H.; Gi, I.; Ryu, J.; Kwon, Y.; Jeong, J.
2023. Applied Sciences, 13 (13), Art.-Nr.: 7829. doi:10.3390/app13137829
Procedure Model for the Closed Loop Recycling of Electric and Electronic Devices; [Vorgehensmodell für die Kreislaufführung von Elektro- und Elektronikaltgeräten]
Wurster, M.; Kille, V.; Binding, M.; Lanza, G.
2023. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 118 (9), 599 – 604. doi:10.1515/zwf-2023-1117
Neural Networks for Constitutive Modeling: From Universal Function Approximators to Advanced Models and the Integration of Physics
Dornheim, J.; Morand, L.; Nallani, H. J.; Helm, D.
2023. Archives of Computational Methods in Engineering. doi:10.1007/s11831-023-10009-y
Computer vision application for industrial Li-ion battery module disassembly
Gerlitz, E.; Enslin, L.-E.; Fleischer, J.
2023. Production Engineering. doi:10.1007/s11740-023-01231-5
Additive-Subtractive Process Chain for Highly Functional Polymer Components
Baranowski, M.; Matkovic, N.; Kleim, S.; Friedmann, M.; Fleischer, J.; Springmann, M.; Middendorf, P.; Schäfer, A.; Waldhof, M.; Parspour, N.
2023. International Journal of Mechanical Engineering and Robotics Research, 12 (6), 339–346. doi:10.18178/ijmerr.12.6.339-346
KI-Einsatz in KMU: Einstiegshürden ausräumen [Clearing entry hurdles for AI deployment in SMEs – Artificial intelligence for German SMEs]
Heider, I.; Yu, H.; Krischke, N.; Wirth, B.; Puchta, A.; Fleischer, J.
2023. wt Werkstattstechnik online, 113 (07-08), 282 – 287. doi:10.37544/1436-4980-2023-07-08-16
A development approach for a standardized quality data model using asset administration shell technology in the context of autonomous quality control loops for manufacturing processes
Bilen, A.; Stamer, F.; May, M. C.; Lanza, G.
2023. Conference Proceedings : 23rd International Conference & Exhibition, 1–4, Euspen
Quality Control in L-PBF for Industrial Production by Means of Production-Integrated Measurement Technology
Weiser, L.; Batschkowski, M.; Eschner, N.; Landgräber, T.; Ohlsen, F.; Seiz, S.; Lanza, G.
2023. Handbook of Additive Manufacturing. Ed.: E. Pei, 475–514, Springer International Publishing. doi:10.1007/978-3-031-20752-5_29
Tooth Root Burnishing in the Kinematics of Gear Skiving
Fischmann, P.; Andreas, H.; Schulze, V.
2023. International Conference on Gears 2023. Hrsg.: C. Stahl, 1829–1844, VDI Verlag. doi:10.51202/9783181024225
Potential of systematically generated training datasets on the accuracy and generalization of AI-based approaches for the automated identification of machine control signals
Gönnheimer, P.; Ströbel, R.; Roßkopf, A.; Dörflinger, R.; Walter, I.; Becker, J.; Fleischer, J.
2023. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering CIRP ICME ‘22, Italy. Hrsg.: R. Teti, D. D’Addona, 145 – 150, Elsevier. doi:10.1016/j.procir.2023.06.026
Production and torsion testig of rotationally moulded hybrid composites drive shafts
Schaible, P.; Kuster, H.; Rombach, D.; Beha, H.; Mayer, D.; Fleischer, J.
2023. SAMPE Conference 23 Madrid. Hrsg.: R. de Ruitjer, -
Interoperable system for automated extraction and identification of machine control data in brownfield production
Gönnheimer, P.; Ströbel, R.; Dörflinger, R.; Mattes, M.; Fleischer, J.
2023. Manufacturing Letters, 35, 915 – 925. doi:10.1016/j.mfglet.2023.08.010
Experimental Determination of Mechanical Properties of Additively Manufacturing Continuous Carbon Fibre Reinforced Polymer Parts Produced by a Novel Laser Sintering Process
Baranowski, M.; Rabenseifner, V.; Kößler, F.; Fleischer, J.
2023. Proceedings of the SAMPE Europe Conference 2023, 1–12, SAMPE Europe
Characterization of the Metal Fused Filament Fabrication Process for Manufacturing of Pure Copper Inductors
Schüßler, P.; Franke, J.; Czink, S.; Antusch, S.; Mayer, D.; Laube, S.; Hanemann, T.; Schulze, V.; Dietrich, S.
2023. Materials, 16 (20), Art.-Nr.: 6678. doi:10.3390/ma16206678
Artificial Intelligence Implementation Strategy for Industrial Companies Using the AI Tool Box - A Morphology for Selecting Relevant AI Use Cases
Beiner, S.; Kandler, M.; May, M. C.; Kinkel, S.; Lanza, G.; Richter, D.
2023. Production Processes and Product Evolution in the Age of Disruption – Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023, 763 – 773, Springer International Publishing. doi:10.1007/978-3-031-34821-1_83
The Control Architecture KaReSA: A Learning Disassembly System
Mangold, S.; Mata, S.; Barrios, A.; Friedmann, M.; Fleischer, J.
2023. Production Processes and Product Evolution in the Age of Disruption – Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023, 562 – 569, Springer International Publishing. doi:10.1007/978-3-031-34821-1_61
The Influence of Intangible Factors in the Strategic Network Configuration on Operations Performance
Steier, G. L.; Silbernagel, R.; Maier, T.; Peukert, S.; Lanza, G.
2023. 30th EurOMA Conference, July 1-6, 2023. Book of Proceedings
Analysis of metaheuristic optimisation techniques for simulated matrix production systems
Benfer, M.; Heyer, V.; Brützel, O.; Liebrecht, C.; Peukert, S.; Lanza, G.
2023. Production Engineering, 18, 159–168. doi:10.1007/s11740-023-01225-3
Vision on metal additive manufacturing: Developments, challenges and future trends
Bernard, A.; Kruth, J.-P.; Cao, J.; Lanza, G.; Bruschi, S.; Merklein, M.; Merklein, M.; Vaneker, T.; Schmidt, M.; Sutherland, J. W.; Donmez, A.
2023. CIRP Journal of Manufacturing Science and Technology, 47, 18–58. doi:10.1016/j.cirpj.2023.08.005
Mechanische Zelldemontage für das direkte Recycling [Mechanical battery cell disassembly for direct end-of-life battery recycling]
Henschel, S.; Dörner, P.-T.; Kößler, F.; Fleischer, J.
2023. wt Werkstattstechnik online, 113 (07-08), 278–281. doi:10.37544/1436-4980-2023-07-08-12
Training and validation dataset 2 of milling processes for time series prediction
Ströbel, R.; Mau, M.; Deucker, S.; Fleischer, J.
2023, September 15. doi:10.35097/1738
Challenges and Opportunities for Large‐Scale Electrode Processing for Sodium‐Ion and Lithium‐Ion Battery
Klemens, J.; Wurba, A.-K.; Burger, D.; Müller, M.; Bauer, W.; Büchele, S.; Leonet, O.; Blázquez, J. A.; Boyano, I.; Ayerbe, E.; Ehrenberg, H.; Fleischer, J.; Smith, A.; Scharfer, P.; Schabel, W.
2023. Batteries & Supercaps, 6 (11), Art.Nr.: e202300291. doi:10.1002/batt.202300291
Development of an Individual Incentive System to Compensate for Fluctuations in Demand Based on a Cluster Analysis
Martin, M.; Gneiting, S.; Peukert, S.; Lanza, G.
2023. Production Processes and Product Evolution in the Age of Disruption : Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023. Hrsg.: F. Galizia, 195–202, Springer International Publishing. doi:10.1007/978-3-031-34821-1_22
Flexibility and Changeability for Software-Defined Manufacturing
Martin, M.; Behrendt, S.; Enke, C.; Tutsch, H.; Peukert, S.; Lanza, G.
2023. Production Processes and Product Evolution in the Age of Disruption : Proceedings of the 9th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2023) and the 11th World Mass Customization & Personalization Conference (MCPC2023), Bologna, Italy, June 2023. Hrsg.: F. Galizia, 373–380, Springer International Publishing. doi:10.1007/978-3-031-34821-1_41
Automated Configuration of Gripper Fingers from a Construction Kit for Robotic Applications
Friedmann, M.; Klüpfel, D.; Frech, C.; Liu, M.; Hauf, J.; Li, G.; Friedrich, C.; Fleischer, J.
2023. Machines, 11 (8), Art.-Nr.: 804. doi:10.3390/machines11080804
Digitaler Zwilling zur Steuerungscodevalidierung
Otte, S.; Mayer, D.; Fleischer, J.
2023. wt Werkstattstechnik online, 113 (07-08), 272–277. doi:10.37544/1436–4980–2023–07–08–6
Monitoring the misalignment of machine tools with autoencoders after they are trained with transfer learning data
Demetgul, M.; Zheng, Q.; Tansel, I. N.; Fleischer, J.
2023. The International Journal of Advanced Manufacturing Technology, 128, 3357–3373. doi:10.1007/s00170-023-12060-2
Generalization of Reinforcement Learning Agents for Production Control
Overbeck, L.; Glaser, V.; May, M. C.; Lanza, G.
2023. Production Processes and Product Evolution in the Age of Disruption. Ed.: F. Galizia, 338–346, Springer International Publishing. doi:10.1007/978-3-031-34821-1_37
In-Process Porositätserkennung für den PBF-LB/M-Prozess. PhD dissertation
Weiser, L. M.
2023, August 25. Shaker Verlag. doi:10.5445/IR/1000161552
Challenges and prospects of automated disassembly of fuel cells for a circular economy
Al Assadi, A.; Goes, D.; Baazouzi, S.; Staudacher, M.; Malczyk, P.; Kraus, W.; Nägele, F.; Huber, M. F.; Fleischer, J.; Peuker, U.; Birke, K. P.
2023. International Journal of Sustainable Resource Management and Environmental Efficiency - Resources, Conservation & Recycling Advances (RCR Advances), 19, Art.-Nr.: 200172. doi:10.1016/j.rcradv.2023.200172
Development and analysis of digital twins of production systems
Overbeck, L.; Graves, S. C.; Lanza, G.
2023. International Journal of Production Research. doi:10.1080/00207543.2023.2242525
Auto-identification of dynamic axis models in machine tools
Puchta, A.; Riegel, V.; Barton, D.; Fleischer, J.
2023. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering Hrsg.: Teti, Prof Roberto, 118, 175–180. doi:10.1016/j.procir.2023.06.031
Concept for In-process Measurement of Residual Stress in AM Processes by Analysis of Structure-Borne Sound
Groenewold, J.; Stamer, F.; Lanza, G.
2023. Production at the Leading Edge of Technology. Ed.: M. Liewald, 24–31, Springer International Publishing. doi:10.1007/978-3-031-18318-8_3
Software-Defined Manufacturing for the Entire Life Cycle at Different Levels of Production
Behrendt, S.; Martin, M.; Puchta, A.; Ströbel, R.; Fisel, J.; May, M.; Gönnheimer, P.; Fleischer, J.; Lanza, G.
2023. Advances in Automotive Production Technology – Towards Software-Defined Manufacturing and Resilient Supply Chains : Stuttgart Conference on Automotive Production (SCAP2022). Ed.: N. Kiefl, 25–34, Springer International Publishing. doi:10.1007/978-3-031-27933-1_3
Modeling the effect of workpiece temperature on micromagnetic high-speed-3MA-testing in case of AISI 4140
Güray, A.; Böttger, D.; González, G.; Stamer, F.; Lanza, G.; Wolter, B.; Schulze, V.
2023. Procedia CIRP, 117, 133 – 138. doi:10.1016/j.procir.2023.03.024
Systematics for an Integrative Modelling of Product and Production System
Schäfer, L.; Günther, M.; Martin, A.; Lüpfert, M.; Mandel, C.; Rapp, S.; Lanza, G.; Anacker, H.; Albers, A.; Köchling, D.
2023. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME 2023), 118, 104–109. doi:10.1016/j.procir.2023.06.019
Evolutionary cost-tolerance optimization for complex assembly mechanisms via simulation and surrogate modeling approaches: application on micro gears
Khezri, A.; Schiller, V.; Goka, E.; Homri, L.; Etienne, A.; Stamer, F.; Dantan, J.-Y.; Lanza, G.
2023. The International Journal of Advanced Manufacturing Technology, 126 (9-10), 4101–4117. doi:10.1007/s00170-023-11360-x
Assessment of the potential of gamification in manual assembly
Dvorak, J.; Merforth, M.; Kandler, M.; Clever, F.; May, M. C.; Lanza, G.
2023. 13th Conference on Learning Factories (CLF 2023) Hrsg.: Hummel, Vera. doi:10.2139/ssrn.4471436
Solving sustainable aggregate production planning with model predictive control
May, M. C.; Kiefer, L.; Frey, A.; Duffie, N. A., (1); Lanza, G., (1)
2023. CIRP Annals, 72 (1), 421–424. doi:10.1016/j.cirp.2023.04.023
Reinforcement Learning for Improvement Measure Selection in Learning Factories
May, M. C.; Hermeler, S.; Mauch, E.; Dvorak, J.; Schäfer, L.; Lanza, G.
2023. Proceedings of the 13th Conference on Learning Factories (CLF 2023). Hrsg.: Hummel, Vera, Social Science Electronic Publishing. doi:10.2139/ssrn.4470426
Reinforcement learning for energy-efficient control of parallel and identical machines
Loffredo, A.; May, M. C.; Schäfer, L.; Matta, A.; Lanza, G.
2023. CIRP Journal of Manufacturing Science and Technology, 44, 91–103. doi:10.1016/j.cirpj.2023.05.007
Towards Product-Production-CoDesign for the Production of the Future
May, M. C.; Schäfer, L.; Frey, A.; Krahe, C.; Lanza, G.
2023. Procedia CIRP, 119, 944–949. doi:10.1016/j.procir.2023.02.172
Classifying Parts using Feature Extraction and Similarity Assessment
Schäfer, L.; Treml, N.; May, M. C.; Lanza, G.
2023. Procedia CIRP, 119, 822–827. doi:10.1016/j.procir.2023.03.127
Lightweight creativity methods for idea generation and evaluation in the conceptual phase of lightweight and sustainable design
König, K.; Zeidler, S.; Walter, R.; Friedmann, M.; Fleischer, J.; Vielhaber, M.
2023. (A. Liu & S. Kara, Eds.) 33rd CIRP Design Conference (Design2023) Hrsg.: Liu, Ang; Kara, Sami, 119, 1170–1175. doi:10.1016/j.procir.2023.05.008
A Fuzzy Inference System-Based Approach For Assessing Strategic Capabilities In Global Production Networks
Steier, G. L.; Gleich, K.; Peukert, S.; Lanza, G.
2023. Proceedings of the Conference on Production Systems and Logistics : CPSL 2023 - 1. Ed.: D. Herberger, 698–707, Leibniz Universität Hannover. doi:10.15488/13489
Finite Element Simulation of the process combination Hammering Turning
Schwalm, J.; Mann, F.; González, G.; Zanger, F.; Schulze, V.
2023. 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Schulze, Volker; Biermann, Dirk, 117, 110–115. doi:10.1016/j.procir.2023.03.020
Conception of a multivariable product property control for punch-hole-rolling
Spies, D.; Molitor, D. A.; Damon, J.; Knoll, M.; Dietrich, S.; Schulze, V.; Groche, P.
2023. Material Forming 26th International ESAFORM Conference on Material Forming (ESAFORM 2023) Krakau, Polen, 19.04.2023–21.04.2023, 2081–2090, Materials Research Forum LLC. doi:10.21741/9781644902479-223
Transferzentren als Wegbereiter für KI in der Produktion
Fleischer, J.; Friedmann, M.; Wirth, F.
2023. Maschinenbau, (3), 4
Multiscale simulation approach to predict the penetration depth of oil between chip and tool during orthogonal cutting of AISI 4140
Sauer, F.; Codrignani, A.; Haber, M.; Falk, K.; Mayrhofer, L.; Schwitzke, C.; Moseler, M.; Bauer, H.-J.; Schulze, V.
2023. (P. D.-I. P. D. B. Prof. Dr.-Ing. habil. Volker Schulze, Ed.) 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Prof. Dr.-Ing. habil. Volker Schulze, Prof Dr-Ing Prof Dirk Biermann, 117, 426–431. doi:10.1016/j.procir.2023.03.072
Model-based tool design for the manufacturing of hypocycloidal internal profiles by polygon turning
Arndt, T.; Sellmeier, V.; Schulze, V.
2023. (V. Schulze & D. Biermann, Eds.) 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Schulze, Volker; Biermann, Dirk, 117, 7–12. doi:10.1016/j.procir.2023.03.003
Laser-Sintern und gleichzeitig Endlosfasern in Kunststoffteile integrieren
Baranowski, M.; Kößler, F.; Fleischer, J.
2023, June 14
Cross-domain Transfer of Defect Features in Technical Domains Based on Partial Target Data
Schlagenhauf, T.; Scheurenbrand, T.
2023. International Journal of Prognostics and Health Management, 14 (1), 1–13. doi:10.36001/ijphm.2023.v14i1.3426
A Methodology for Sustainability Assessment and Decision Support for Sustainable Handling Systems
Scholz, J.; Dilger, L. J.; Friedmann, M.; Fleischer, J.
2023. 30th CIRP Life Cycle Engineering Conference Hrsg.: Guo, Yuebin; Helu, Moneer, 116, 47–52. doi:10.1016/j.procir.2023.02.009
Lasersintern mit Endlosfasern
Baranowski, M.; Moll, P.; Coutandin, S.; Fleischer, J.
2020, August 24
Software-Defined Workpiece Positioning for Resource-Optimized Machine Tool Utilization
Ströbel, R.; Probst, Y.; Hutt, L.; Fleischer, J.
2023. Journal of Machine Engineering, 23 (1), 71–84. doi:10.36897/jme/161660
Cyber-Physical Test Environment for the Identification of Interacting Wear Effects in Feed Axes
Bott, A.; Stöbel, R.; Osen, G.; Fleischer, J.
2023. Journal of Machine Engineering, 23 (1), 123–132. doi:10.36897/jme/162266
Analyse der Kinematik und Kinetik von Planetenwälzgewindetrieben. PhD dissertation
Merz, S.
2023, June 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000159021
Short-time induction heat treatment of high speed steel AISI M2: Laboratory proof of concept and application-related component tests
Damon, J.; Schüßler, P.; Mühl, F.; Dietrich, S.; Schulze, V.
2023. Materials & Design, 230, Artkl.Nr.: 111991. doi:10.1016/j.matdes.2023.111991
Self-healing Fuel Cells by Biological Actuators
Gartner, P.; Lanza, G.; Rudat, J.; Bilger, M.; Grünert, T.; Nesterov-Mueller, A.; Zimmerer, N.; Quarz, P.; Scharfer, P.; Schabel, W.; Jung, A. P.; Stahlberger, M.; Bräse, S.
2023. Procedia CIRP, 116, 161–166. doi:10.1016/j.procir.2023.02.028
Selective Peptide Binders to the Perfluorinated Sulfonic Acid Ionomer Nafion
Schmidt, D.; Gartner, P.; Berezkin, I.; Rudat, J.; Bilger, M.; Grünert, T.; Zimmerer, N.; Quarz, P.; Scharfer, P.; Brückel, J.; Jung, A. P.; Singh, P.; Pooja, P.; Meier, B.; Stahlberger, M.; Schabel, W.; Bräse, S.; Lanza, G.; Nesterov-Mueller, A.
2023. Advanced Functional Materials, Article no: 2214932. doi:10.1002/adfm.202214932
Understanding the gear surface enhancement by hard-hobbing via ferritic-martensitic grain analysis
Fang, Z.; Ren, Z.; Schulze, V., (2); Feng, Y.; Nagata, T.; Furukawa, S.; Tomiyama, K.; Kizaki, T., (2)
2023. CIRP Annals. doi:10.1016/j.cirp.2023.04.007
Extended Production Planning of Reconfigurable Manufacturing Systems by Means of Simulation-based Optimization
Behrendt, S.; Wurster, M.; May, M. C.; Lanza, G.
2023. 4th Conference on Production Systems and Logistics (CPSL 2023), 210–220, publish-Ing. doi:10.15488/13440
Enhanced chip analysis with computed tomography for estimation of chip segmentation frequency
Diaz Ocampo, D.; Koch, J.; González, G.; Zanger, F.; Heizmann, M.
2023. Production Engineering. doi:10.1007/s11740-023-01200-y
Siamese Basis Function Networks for Data-Efficient Defect Classification in Technical Domains
Schlagenhauf, T.; Yildirim, F.; Brückner, B.
2023. Software Engineering and Formal Methods. SEFM 2022 Collocated Workshops – AI4EA, F-IDE, CoSim-CPS, CIFMA, Berlin, Germany, September 26–30, 2022, Revised Selected Papers. Ed.: P. Masci, 71–92, Springer International Publishing. doi:10.1007/978-3-031-26236-4_7
Misalignment detection on linear feed axis using sensorless motor current signals
Demetgul, M.; Zihan, M.; Heider, I.; Fleischer, J.
2023. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-11258-8
In-Process Monitoring of Hobbing Process Using an Acoustic Emission Sensor and Supervised Machine Learning
Schiller, V.; Klaus, S.; Bilen, A.; Lanza, G.
2023. Algorithms, 16 (4), Art.-Nr.: 183. doi:10.3390/a16040183
Sim2real Transfer Learning for Point Cloud Segmentation: An Industrial Application Case on Autonomous Disassembly
Wu, C.; Bi, X.; Pfrommer, J.; Cebulla, A.; Mangold, S.; Beyerer, J.
2023. 2023 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV), 4520–4529, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WACV56688.2023.00451
Improving Production System Flexibility and Changeability Through Software-Defined Manufacturing
Behrendt, S.; Ungen, M.; Fisel, J.; Hung, K.-C.; May, M.-C.; Leberle, U.; Lanza, G.
2023. A. B. T. M. H.-C. Liewald Mathiasand Verl (Ed.), Production at the Leading Edge of Technology – Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Ed.: M. Liewald, 705–716, Springer International Publishing. doi:10.1007/978-3-031-18318-8_70
Approach to Develop a Lightweight Potential Analysis at the Interface Between Product, Production and Material
Zeidler, S.; Scholz, J.; Friedmann, M.; Fleischer, J.
2023. Production at the leading edge of technology : Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Ed.: M. Liewald, 696–704, Springer International Publishing. doi:10.1007/978-3-031-18318-8_69
Thermomechanical multiscale PBF-LB-process simulation of macroscopic structures to predict part distortion recoater collisions
Drechsel, K.; Frey, M.; Schulze, V.; Zanger, F.
2022. M. Liewald, A. Verl, T. Bauernhansl & H.-C. Möhring (Eds.), Production at the Leading Edge of Technology Hrsg.: Liewald, Matthias; Verl, Alexander; Bauernhansl, Thomas; Möhring, Hans-Christian. Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP) Stuttgart, Deutschland, 12.10.2022–13.10.2022, 366–375, Springer. doi:10.1007/978-3-031-18318-8_38
Latest advances in cloud manufacturing and global production networks enabling the shift to the mass personalization paradigm
Lanza, G.; Peukert, S.; Steier, G. L.
2022. Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology, 39–77, Elsevier. doi:10.1016/B978-0-12-823657-4.00008-7
Decision support models for strategic production network configuration – A systematic literature analysis
Steier, G. L.; Benfer, M.; Werz, P.; Ziora, M.; Lanza, G.
2022. (D. C. Amir Malakizadi Peter Krajnik, Ed.) 55th CIRP Conference on Manufacturing Systems Hrsg.: Amir Malakizadi, Danfang Chen, Peter Krajnik, 107, 1433–1438. doi:10.1016/j.procir.2022.05.170
Machine Learning in Manufacturing towards Industry 4.0: From ‘For Now’ to ‘Four-Know’
Chen, T.; Sampath, V.; May, M. C.; Shan, S.; Jorg, O. J.; Aguilar Martín, J. J.; Stamer, F.; Fantoni, G.; Tosello, G.; Calaon, M.
2023. Applied Sciences (Switzerland), 13 (3), Art.-Nr.: 1903. doi:10.3390/app13031903
Flexible Twisting Process of Stators with Hairpin Winding
Hausmann, L.; Wirth, F.; Fleischer, J.
2023. 2022 12th International Electric Drives Production Conference (EDPC), 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC56367.2022.10019760
Performance parameters for evaluating pore detection ability of computed tomography systems
Höger, K.; Schild, L.; Weiser, L.; Lanza, G.
2023. 12th International Conference on Industrial Computed Tomography, Fürth, Germany (iCT 2023). doi:10.58286/27704
Laser surface hardening: A simulative study of tempering mechanisms on hardness and residual stress
Schüßler, P.; Damon, J.; Mühl, F.; Dietrich, S.; Schulze, V.
2023. Computational Materials Science, 221, Art.-Nr.: 112079. doi:10.1016/j.commatsci.2023.112079
Process development for the hybrid additive manufacturing of metallic structures on polymer substrates
Czink, S.; Lubkowitz, V.; Dietrich, S.; Schulze, V.
2023. Additive Manufacturing Letters, Art.-Nr.: 100132. doi:10.1016/j.addlet.2023.100132
Creation and validation of systems for product and process configuration based on data analysis
Frey, A. M.; May, M. C.; Lanza, G.
2023. Production Engineering, 12 (2), 263–277. doi:10.1007/s11740-022-01176-1
Graph-based prediction of missing KPIs through optimization and random forests for KPI systems
May, M. C.; Fang, Z.; Eitel, M. B. M.; Stricker, N.; Ghoshdastidar, D.; Lanza, G.
2023. Production Engineering, 17 (2), 211–222. doi:10.1007/s11740-022-01179-y
A Framework for Integration of Resource Allocation and Reworking Concept into Design Optimisation Problem
Khezri, A.; Homri, L.; Etienne, A.; Etienne, A.; Dantan, J.-Y.; Lanza, G.
2022. IFAC-PapersOnLine, 55 (10), 1037–1042. doi:10.1016/j.ifacol.2022.09.524
Stainless Steels for Plastic Mold Frames Featuring Enhanced Machinability
Niederhofer, P.; Henke, L.; Frie, D.; Neuenfeldt, M.; Zanger, F.
2023. steel research international, Art.-Nr.: 2200754. doi:10.1002/srin.202200754
Enhancing the prediction quality of mechanical properties for powder bed fusion with laser beam by dynamic observation of flying particles
Nagato, K.; Ozawa, T.; Neuenfeldt, M.; Zanger, F.; Zhao, M.; Schulze, V.
2023. Materials and Design, 227, Art.-Nr.: 111696. doi:10.1016/j.matdes.2023.111696
Discriminative feature learning through feature distance loss
Schlagenhauf, T.; Lin, Y.; Noack, B.
2023. Machine Vision and Applications, 34 (2), Art.-Nr.: 25. doi:10.1007/s00138-023-01379-1
A New Approach to Consider Influencing Factors in the Design of Global Production Networks
Martin, M.; Peukert, S.; Lanza, G.
2023. Production at the Leading Edge of Technology. Hrsg.: M. Liewald, 623–632, Springer Nature Switzerland. doi:10.1007/978-3-031-18318-8_62
Use Cases for Digital Twins in Battery Cell Manufacturing
Henschel, S.; Otte, S.; Mayer, D.; Fleischer, J.
2023. Production at the Leading Edge of Technologye. Hrsg.: M. Liewald, 833–842, Springer Nature Switzerland. doi:10.1007/978-3-031-18318-8_82
Generation of Initial Fiber Orientation States for Long Fiber Reinforced Thermoplastic Compression Molding Simulation
Schreyer, L.; Blarr, J.; Höger, K.; Meyer, N.; Kärger, L.
2022. Composites Meet Sustainability : Proceedings of the 20th European Conference on Composite Materials, ECCM20. 26-30 June, 2022, Lausanne, Switzerland. Bd.: 4. Ed.: A. Vassilopoulos, 687–694, École Polytechnique Fédérale de Lausanne (EPFL)
In-situ characterization of tool temperatures using in-tool integrated thermoresistive thin-film sensors
González, G.; Plogmeyer, M.; Schoop, J.; Bräuer, G.; Schulze, V.
2023. Production Engineering. doi:10.1007/s11740-023-01186-7
Fostering robustness in production networks in an increasingly disruption-prone world
Peukert, S.; Hörger, M.; Lanza, G.
2023. CIRP Journal of Manufacturing Science and Technology, 41, 413–429. doi:10.1016/j.cirpj.2023.01.002
Autonomeous production control for matrix production based on deep Q-learning
Hofmann, C.; Krahe, C.; Stricker, N.; Lanza, G.
2020. Procedia CIRP, 88, 25–30. doi:10.1016/j.procir.2020.05.005
Evaluation of flexible cell assembly processes on novel, flexible production equipment
Storz, T.; Fleischer, J.
2020. International Battery Production Conference, Conference Brochure, 2.11.-4.11.202, Virtual, 57, Karlsruher Institut für Technologie (KIT)
Flexibilitätsoptimale Austaktung der Fließmontage
Hofmann, C.; Schoof, J.; Kuhnle, A.; Lanza, G.
2021. wt Werkstattstechnik online, 2021, 260–264. doi:10.37544/1436–4980–2021–04–82
Hocheffiziente Fertigungsmodule für Li-Ion Zellen mit hochpräzisen Presseneinheiten
Schmidgruber, N.; Fleischer, J.; Hofmann, J.
2021. KLIB Batterieforum2021, 20 January 2021 - 09 February 2021,Virtual, Kompetenznetzwerk Lithium-Ionen-Batterien e. V. (KLIB)
Entwicklung eines flexiblen Produktionssystems für Batteriezellen
Storz, T.; Schild, L.; Vogt, M.; Hofmann, J.; Fleischer, J.; Lanza, G.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2021 (4), 247–253. doi:10.1515/zwf-2021-0049
Optimal line configurations for agile production systems for battery cell manufacturing
Overbeck, L.; Lanza, G.; Voigtländer, S.
2022. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME, 13th - 15th July 2022
Comprehensive Validation Metrics and Precise Updating of Digital Twins of Production Systems
Overbeck, L.; Louarn, A. Le; Brützel, O.; Stricker, N.; Lanza, G.
2022. Simulation Notes Europe, 32 (3), 135–142. doi:10.11128/sne.32.tn.10613
Explainable AI: A key driver for AI adoption, a mistaken concept or a practically irrelevant feature?
Dvorak, J.; Kopp, T.; Kinkel, S.; Lanza, G.
2022. 4. UR-AI Symposium an der HFU, Schwenningen, 19.10.2022, 88–97, Hochschule Furtwangen
Towards a universal manufacturing node: Requirements for a versatile, laser-based machine tool for highly adaptable manufacturing
Jarwitz, M.; Trauneckera, D.; Arnim, C. von; Müller, N.; Kramer, S.
2022. 12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany, 111, 816–821. doi:10.1016/j.procir.2022.08.090
Tool wear development in gear skiving of different quenched and tempered steels
Sauer, F.; Schulze, V.; Arndt, T.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1331–1343, VDI Verlag
Greiferfinger für eine schnelle Rekonfiguration
Friedmann, M.; Schabel, S.; Gerber, J.; Döhring, A.; Meschter, L.; Fleischer, J.; May, M.
2022. wt Werkstattstechnik online, 2022, 629–634
Simulation-based tool and process design for gear skiving with small axis crossing angles
Hilligardt, A.; Schulze, V.
2022. Aachen Conference on Gear Production, 9th-10th November 2022, Aachen, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Scherschneiden von Elektroden für Li-Ionen-Zellen
Schabel, S.; Fleischer, J.
2022. wt Werkstattstechnik online, 112 (7-8), 487–491. doi:10.37544/1436–4980–2022–7–8–41
Stanz- und Biegetechnik - Chancenanalyse im Kontext der Automobilwirtschaft
Fleischer, J.; Heim, M.; Schabel, S.; Wirth, F.
2022
A new method for avoiding meshing interference in gear skiving
Hilligardt, A.; Klose, J.; Schulze, V.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1305–1317, VDI Verlag
Flexible Anbindung von Maschinen in der Produktion
Baranowski, M.; Scholz, J.; Friedmann, M.; Fleischer, J.
2022. VDI-Z, 164 (7-8), 76–78. doi:10.37544/0042-1766-2022-07-08
Development of a Digital Twin for Improved Ramp-Up Processes in the Context of Li-Ion-Battery-Cell-Stack-Formation
Husseini, K.; Schmidgruber, N.; Weinmann, H.; Maibaum, K.; Ruhland, J.; Fleischer, J.
2022. Procedia CIRP, 106, 27–32. doi:10.1016/j.procir.2022.02.150
Limitationen in der formatflexiblen Herstellung von Pouchfolie-Halbschalen
Schmidgruber, N.; Fleischer, J.
2022. KLIB Batterieforum2022, 19.01.-08.02.2022, Online, Kompetenznetzwerk Lithium-Ionen-Batterien (KLiB)
Investigation on a micro-environment concept for MEA production process supported by numerical simulations
Ma, L.; Zimmerer, N.; Schäfer, J.; Quarz, P.; Heckmann, T.; Scharfer, P.; Schabel, W.; Fleischer, J.
2022. FC³ - 2nd Fuel Cell Conference Chemnitz 2022 - Saubere Antriebe. Effizient Produziert. : Wissenschaftliche Beiträge und Präsentationen der zweiten Brennstoffzellenkonferenz am 31. Mai und 01. Juni 2022 in Chemnitz. Hrsg.: Thomas von Unwerth, Welf-Guntram Drossel, Universitätsverlag Chemnitz
Manufacturing Hybrid Ceramic Components by Combining CIM and VPP
Schubert, J.; End, Y.; Rosen, M.; Zanger, F.; Schulze, V.
2022. 5th International Conference on Hybrid Materials and Structures (2022), Leoben, Austria, July 20–22, 2022
Digitalisierung in der Supply Chain: Trends und Anwendungsfelder in der Branche der Antriebstechnik des Maschinen- und Anlagenbaus
Overbeck, L.; Baralija, D.; Silbernagel, R.; Rauen, H.; Fleischer, J.; Lanza, G.
2022. Industrie 4.0 Management, 2022 (4), 23–27
Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers
Springmann, M.; Matkovic, N.; Schäfer, A.; Waldhof, M.; Schlotthauer, T.; Friedmann, M.; Middendorf, P.; Fleischer, J.; Parspour, N.
2022. Key Engineering Materials Vol. 926, 926, 268–279. doi:10.4028/p-ed900k
Systematic Identification of Hazardous States and Approach for Condition Monitoring in the Context of Li-ion Battery Disassembly
Gerlitz, E.; Greifenstein, M.; Kaiser, J.-P.; Mayer, D.; Lanza, G.; Fleischer, J.
2022. Procedia CIRP, 107, 308–313. doi:10.1016/j.procir.2022.04.050
Hämmerndes Drehen: Hauptzeitparallele Zerspanung und mechanische Oberflächentexturierung
Schwalm, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2022. wt Werkstattstechnik online, 2022 (1), 22–27. doi:10.37544/1436-4980-2022-01-02-26
Identification of hybridization strategies for combining fused filament fabrication with unidirectional tape reinforcement
Matkovic, N.; Höger, K.; Friedmann, M.; Stamer, F.; Fleischer, J.; Lanza, G.
2023. Composites Communications, 38, Art.Nr. 101484. doi:10.1016/j.coco.2022.101484
Development of a Semantic Database Model to Facilitate Data Analytics in Battery Cell Manufacturing
Yesilyurt, O.; Brandt, D.; Grimm, J.; Husseini, K.; Naumann, A.; Meiners, J.; Becker-Koch, D.
2022. Proceedings of the 11th International Conference on Data Science, Technology and Applications (DATA 2022). Ed.: A. Cuzzocrea, 13–20, SciTePress. doi:10.5220/0011139500003269
Quality assurance for flexible stack assembly of lithium‐ion cells
Kollenda, A.; Husseini, K.; Henschel, S.; Schmidgruber, N.; Becker-Koch, D.; Braunwarth, W.; Fleischer, J.; Daub, R.
2023. Energy Technology, 11 (5), Art.-Nr.: 2201059. doi:10.1002/ente.202201059
Case-based reasoning user support for industrial x-ray computed tomography
Schild, L.; Höger, K.; Zanini, F.; Lanza, G.; Carmignato, S.
2023. Measurement Science and Technology, 34 (4), Article no: 045403. doi:10.1088/1361-6501/acacba
Kategorisierung und Erstbeurteilung von Wandlungstreibern [Categorization and Initial Assessment of Change Drivers]
Martin, M.; Lars Heege, S.; Peukert, S.; Lanza, G.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 842–846. doi:10.1515/zwf-2022-1171
3D-Druck für die Mobilität von morgen : Additiv-subtraktiver Prozess mit Inline-Prozessregelung für hochfunktionale Kunststoffbauteile
Baranowski, M.; Matkovic, N.; Friedmann, M.; Fleischer, J.
2021. wt Werkstattstechnik online, 111 (11-12), 807–811. doi:10.37544/1436-4980-2021-11-12-37
Faserblasverfahren für biologische Bauteile
Mangold, S.; Kist, S.; Friedmann, M.; Fleischer, J.
2022. VDI-Z, 164 (11-12), 67–69. doi:10.37544/0042-1766-2022-11-12-67
Highly dynamic robotic leg for non-biomimetic walking robots
Baumgaertner, J.; Bach, J.; Masia, L.; Badreddin, E.; Pott, P. P.
2022. ACTUATOR 2022; International Conference and Exhibition on New Actuator Systems and Applications, Mannheim, Deutschland, 29-30 June 2022, 1–4, Institute of Electrical and Electronics Engineers (IEEE)
TriP: A Python package for the kinematic modeling of serial-parallel hybrid robots
Baumgärtner, J.; Miller, T.
2022. Journal of Open Source Software, 7 (71), 3967. doi:10.21105/joss.03967
High cycle fatigue behaviour of AISI 4140 steel manufactured by laser-powder bed fusion
Shi, C.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. International Journal of Fatigue, 168, Article no: 107469. doi:10.1016/j.ijfatigue.2022.107469
Leitfaden Fit4E - Einstieg in die Produktionstechnik für die Elektromobilität
Fleischer, J.; Schäfer, J.; Wößner, W.; Hofmann, J.
2020
Investigations for the Optimization of Metal Freeforming using the ARBURG freeformer
Krischke, N.; Friedmann, M.; Fleischer, J.
2022. D. Bourell (Ed.), Solid Freeform Fabrication 2022: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Austin, Texas, USA, July 25-27, 2022, Hrsg.: Bourell, Dave, 1001–1009, University of Texas at Austin. doi:10.26153/tsw/44580
Agile Erstellung von Materialflusssimulationen [Agile Concept for the Creation of Material Flow Simulations]
Benfer, M.; Autenrieth, M.; Brützel, O.; Grützner, H.; Peukert, S.; Lanza, G.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 867–871. doi:10.1515/zwf-2022-1158
Zukunftsfähige Produktionsnetzwerke in disruptiven Zeiten
Schuh, G.; Friedli, T.; Lanza, G.; Schollemann, A.; Specht, F.; Benfer, M.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 794–798. doi:10.1515/zwf-2022-1160
Determination of the abstraction level in production network models
Benfer, M.; Ziegler, M.; Gützlaff, A.; Fränken, B.; Cremer, S.; Prote, J.-P.; Schuh, G.
2019. P. Butala, E. Govekar & R. Vrabič (Eds.), 52nd CIRP Conference on Manufacturing Systems (CMS), CIRP Conference on Manufacturing Systems (CMS), Ljubljana, Slovenia, June 12-14, 2019 Hrsg.: Butala, Peter; Govekar, Edvard; Vrabič, Rok, 198–203, Elsevier. doi:10.1016/j.procir.2019.03.035
Function-oriented defect assessment in hybrid sheet molding compound tensile specimen using surrogate models
Bretz, L.; Koch, D.; Debowski, K.; Höger, K.; Lanza, G.
2023. Production Engineering, 17 (2), 223–236. doi:10.1007/s11740-022-01174-3
Influence of Hybrid-Additive Interfaces Manufactured by Laser Powder Bed Fusion on the Surface Topography after Machining of Ti-6Al-4V
Fischmann, P.; Schulze, V.; Zanger, F.
2022. 22nd Machining Innovations Conference for Aerospace Industry 2022 (MIC 2022), November 30th and December 1st 2022, Hannover, Germany, 88–93, SSRN. doi:10.2139/ssrn.4259263
Agile Produktionssysteme in der Batteriezellfertigung
Kößler, F.; Mayer, D.; Fleischer, J.
2022. wt Werkstattstechnik online, 112 (44780), 492–495. doi:10.37544/1436-4980-2022-07-08-46
Einfluss der Oberflächenbearbeitung, Prozessstellgrößen und Wärmebehandlung auf das mechanische Verhalten von hybriden Aluminiumbauteilen
Drechsel, K.; Schulze, V.; Zanger, F.
2022. Additive Fertigung : Werkstoffe - Prozesse - Wärmebehandlung = Additive Manufacturing : Materials – Processes - Heat Treatment (AWT 2022), Bremen, 29.-30. Juni 2022, 151–160, Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V
Produkt-Produktions-CoDesign: Ein Ansatz zur integrierten Produkt- und Produktionssystementwickung über Generationen und Lebenszyklen hinweg
Albers, A.; Rapp, S.; Klippert, M.; Lanza, G.; Schäfer, L.
2022. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK, (1), 3
Applying Natural Language Processing in Manufacturing
May, M. C.; Neidhöfer, J.; Körner, T.; Schäfer, L.; Lanza, G.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 184–189. doi:10.1016/j.procir.2022.10.071
Shopfloor Management Acceptance in Global Manufacturing
Kandler, M.; Dierolf, L.; Bender, M.; Schäfer, L.; May, M. C.; Lanza, G.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 190–195. doi:10.1016/j.procir.2022.10.072
Learning Factory Labs as Field-in-the-Lab Environments – An Experimental Concept for Human-Centred Production Research
Kandler, M.; Schäfer, L.; Gorny, P. M.; Ströhlein, K.; Lanza, G.; Nieken, P.
2021. Proceedings of the 11th Conference on Learning Factories (CLF)
Product-Production-Co-Design for Agile Production of Electric Traction Motors
Fleischer, J.; Doppelbauer, M.; Albers, A.; Fraider, F.; Halwas, M.; Schmitt, M.; Breining, P.; Braumandl, A.; Kübler, M.; Bause, K.; Ott, S.
2022. T. E. A. for Electromobility (Ed.), 35th International Electric Vehicle Symposium and Exhibition
Dynamic Pricing Model for Batch-Specific Tolerance Allocation in Collaborative Production Networks
Silbernagel, R.; Wagner, C.; Peukert, S.; Lanza, G.
2022. (J.-Y. Dantan, G. Lanza & L. Homri, Eds.) 17th CIRP Conference on Computer Aided Tolerancing (CAT2022) Hrsg.: Dantan, Jean-Yves; Lanza, Gisela; Homri, Lazhar, 114, 153–158. doi:10.1016/j.procir.2022.10.022
Image based control system for improving fiber injection molding process
Moll, P.; Xu, J.; Coutandin, S.; Fleischer, J.
2022. Procedia CIRP, 15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021, Ed.: R. Teti, 112, 430–435. doi:10.1016/j.procir.2022.09.032
Adaptive and Dynamic Feedback Loops between Production System and Production Network based on the Asset Administration Shell
Stamer, F.; Maier, S.; Peukert, S.; Lanza, G.
2022. Procedia CIRP, 15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021, Ed.: R. Teti, 112, 79–84. doi:10.1016/j.procir.2022.09.048
Modular, Digital Shopfloor Management Model – A Maturity Assessment For A Human-Oriented Transformation Process
Kandler, M.; Gabriel, P.; Schröttle, V.; May, M. C.; Lanza, G.
2022. Proceedings CPSL 2022 : Proceedings of the Conference on Production Systems and Logistics : CPSL 2022. Ed.: D. Herberger, 642–651, publish-Ing. doi:10.15488/12153
Generation of Artificial Learning Data to Train Functional Meta-Models of Micro Gears
Schiller, V.; Gauder, D.; Gölz, J.; Bott, A.; Wannenwetsch, M.; Lanza, G.
2022. Procedia CIRP, 114, 67–72. doi:10.1016/j.procir.2022.10.010
Systematic quantitative investigation of the unscrewing process with regard to breakaway torque
Mangold, S.; Gerlitz, E.; Zimprich, S.; Friedmann, M.; Matthiesen, S.; Fleischer, J.
2022. Journal of Remanufacturing, 13, 53–66. doi:10.1007/s13243-022-00120-x
Analysis of the visually detectable wear progress on ball screws
Schlagenhauf, T.; Scheurenbrand, T.; Hofmann, D.; Krasnikow, O.
2022. doi:10.48550/arXiv.2205.01149
Industry 4.0-Oriented Turnkey Project: Rapid Configuration and Intelligent Operation of Manufacturing Systems
Xie, S.; Zhang, W.; Xue, F.; Li, D.; Liu, Y.; Fleischer, J.; Ehrmann, C.
2022. Machines, 10 (11), Art.-Nr.: 983. doi:10.3390/machines10110983
Analysis of the visually detectable wear progress on ball screws
Schlagenhauf, T.; Scheurenbrand, T.; Hofmann, D.; Krasnikow, O.
2023. CIRP Journal of Manufacturing Science and Technology, 40, 1–9. doi:10.1016/j.cirpj.2022.10.003
Approach for Evaluating Changeable Production Systems in a Battery Module Production Use Case
Fries, C.; Hölscher, P.; Brützel, O.; Lanza, G.; Bauernhansl, T.
2023. Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus – Proceedings of FAIM 2022, June 19–23, 2022, Detroit, Michigan, USA. Ed.: K.-Y. Kim, 207–216, Springer International Publishing. doi:10.1007/978-3-031-18326-3_21
Additive-subtractive manufacturing of multi-material sensor-integrated electric machines using the example of the transversal flux machine
Baranowski, M.; Schubert, J.; Werkle, K. T.; Schoner, S.; Friedmann, M.; Stehle, T.; Fleischer, J.; Schulze, V.; Mohring, H.-C.
2022. IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–4, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA52439.2022.9921711
Digitalization Platform for Sustainable Battery Cell Production: Coupling of Process, Production, and Product Models
Ventura Silva, G.; Thomitzek, M.; Lippke, M.; Heckmann, T.; Karaki, H.; Lischka, C.; Möhlen, F.; Mayer, D.; Hagemeister, J.; Daub, R.; Fleischer, J.; Nirschl, H.; Schröder, D.; Scharfer, P.; Schabel, W.; Kwade, A.; Herrmann, C.
2022. Energy Technology, 11 (5), Art.-Nr.: 2200801. doi:10.1002/ente.202200801
Operations Research in International Manufacturing Networks
Benfer, M.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Ed.: T. Friedli, 219–231, Springer Nature Switzerland. doi:10.1007/978-3-030-72740-6_16
Resilience Measures in Global Production Networks: A Literature Review and Conceptual Framework
Benfer, M.; Verhaelen, B.; Peukert, S.; Lanza, G.
2021. Die Unternehmung, 75 (4), 491–520. doi:10.5771/0042-059X-2021-4-491
Single part tracking enabled by fluorescent Polysecure tracing particles in AM parts
Gartner, P.; Krischke, N.; Benfer, M.; Bender, M.; Lanza, G.; Fleischer, J.; Dost, G.
2022. D. L. Bourell (Ed.), Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Hrsg.: Bourell, David L., 1998–2010, Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference
Exploring the Applicability of Sinterjoining to Combine Additively Manufactured Ceramic Components
Schubert, J.; End, Y.; Schulze, V.; Zanger, F.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 18–23. doi:10.1016/j.procir.2022.10.043
Practice-oriented methodology for increasing production ramp-up efficiency in global production networks of SME
Verhaelen, B.; Martin, M.; Peukert, S.; Lanza, G.
2022. Production Engineering, 17, 145–177. doi:10.1007/s11740-022-01154-7
Influence of initial powder layer thickness and focus deviation on the properties of hybrid manufactured parts by Laser Powder Bed Fusion
Lubkowitz, V.; Fischmann, P.; Schulze, V.; Zanger, F.
2022. 12TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES (LANE 2022), 111, 87–91. doi:10.1016/j.procir.2022.08.136
Thermal Analysis of Novel Winding Structures for the Usage in Electrical Machines
Hoffmann, F.; Halwas, M.; Fleischer, J.; Doppelbauer, M.
2022. Conference Proceedings: 2022 International Conference on Electrical Machines (ICEM), 490–495, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910869
Improvement of the Mechanical Strength of High Speed Synchronous Reluctance Machines by Fiber Reinforced Support Structures
Gong, Y.; Heim, M.; Waldhof, M.; Wößner, W.; Fischer, J.; Parspour, N.; Fleischer, J.
2022. Conference Proceedings: 2022 International Conference on Electrical Machines (ICEM), 49–55, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910716
Konzept zur Erhöhung der Fertigungsgenauigkeit durch Kraftkompensation : Drehen mit dem Roboter und mehreren Werkzeugen [Turning with a robot and several tools]
Arndt, T.; Bertram, T.; Bryg, M.; Kipfmüller, M.; Kotschenreuther, J.; Schulze, V.
2022. wt Werkstattstechnik online, 112 (10), 722–726. doi:10.37544/1436-4980-2022-10-92
Tracing the technology development and trends of hard carbon anode materials - A market and patent analysis
Liu, H.; Baumann, M.; Dou, X.; Klemens, J.; Schneider, L.; Wurba, A.-K.; Häringer, M.; Scharfer, P.; Ehrenberg, H.; Schabel, W.; Fleischer, J.; von der Aßen, N.; Weil, M.
2022. Journal of Energy Storage, 56 (B), Art.-Nr.: 105964. doi:10.1016/j.est.2022.105964
Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines
Halwas, M.; Wirth, F.; Fleischer, J.
2022. Key Engineering Materials, 926, 1809–1818. doi:10.4028/p-hhpr62
Entwicklung einer autonomen Elektrodenbeschichtung = Development of an Autonomous Electrode Coating
Denk, F.; Hoffmann, A.; Höger, K.; Pfrommer, J.; Poyer, M.; Scharfer, P.; Spiegel, S.; Fleischer, J.; Lanza, G.; Schabel, W.
2022. Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 117 (10), 673–676. doi:10.1515/zwf-2022-1128
Federnde Rotorkomponenten für elektrische Antriebe = Spring-loaded Rotor Components for Electric drives
Wößner, W.; Gürbüz, H.; Heim, M.; Klein, N.; Schulz, J.; Fleischer, J.
2022. Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 117 (10), 667–672. doi:10.1515/zwf-2022-1103
Uncertainty determination of a novel single flank rolling test facility for micro spur gears
Gauder, D.; Gölz, J.; Hornung, N.; Lanza, G.
2022. CIRP Journal of Manufacturing Science and Technology, 39, 332–344. doi:10.1016/j.cirpj.2022.08.014
Autonomous Visual Detection of Defects from Battery Electrode Manufacturing
Choudhary, N.; Clever, H.; Ludwigs, R.; Rath, M.; Gannouni, A.; Schmetz, A.; Hülsmann, T.; Sawodny, J.; Fischer, L.; Kampker, A.; Fleischer, J.; Stein, H. S.
2022. Advanced Intelligent Systems, 4 (12), Art.-Nr.: 2200142. doi:10.1002/aisy.202200142
Model‐Based Optimization of Web Tension Control for the Flexible Cell Stack Assembly of Lithium‐Ion Battery Cells
Husseini, K.; Schmidgruber, N.; Henschel, S.; Mayer, D.; Fleischer, J.
2022. Energy Technology, 11 (5), Art.-Nr.: 2200679. doi:10.1002/ente.202200679
Modularer Baukasten für die Erstellung anwendungsspezifischer Greiffinger: Greiferfinger für eine schnelle Rekonfiguration
Friedmann, M.; Schabel, S.; Gerber, J.; Döhring, A.; Meschter, L.; Fleischer, J.; May, M.
2022. wt Werkstattstechnik online, 112 (09), 629–634. doi:10.37544/1436-4980-2022-09-101
Autonomous visual detection of defects from battery electrode manufacturing
Choudhary, N.; Clever, H.; Ludwigs, R.; Rath, M.; Gannouni, A.; Schmetz, A.; Hülsmann, T.; Sawodny, J.; Fischer, L.; Kampker, A.; Fleischer, J.; Stein, H. S.
2022. American Chemical Society (ACS). doi:10.26434/chemrxiv-2022-pvwj3
Industrielles Transferlernen : Der Schlüssel zur Übertragung von Künstlicher Intelligenz = Industrial Transfer Learning : The Key to Transfer Artificial Intelligence
Netzer, M.; Alexander, P.; Gönnheimer, P.; Fleischer, J.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (9), 597–599. doi:10.1515/zwf-2022-1109
Optimierung einer Materialflusssteuerung zur Energieeffizienzerhöhung in der Produktion
Brützel, O.; Thiery, D.; May, M.; Lanza, G.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (9), 591–596. doi:10.1515/zwf-2022-1106
Optimal Robot Workpiece Placement for Maximized Repeatability
Baumgärtner, J.; Gönnheimer, P.; Fleischer, J.
2023. Advances in System-Integrated Intelligence – Proceedings of the 6th International Conference on System-Integrated Intelligence (SysInt 2022), September 7-9, 2022, Genova, Italy. Ed.: M. Valle, 252–261, Springer International Publishing. doi:10.1007/978-3-031-16281-7_25
Towards narrowing the reality gap in electromechanical systems: error modeling in virtual commissioning
Kuhn, A. M.; May, M. C.; Liu, Y.; Kuhnle, A.; Tekouo, W.; Lanza, G.
2022. Production Engineering, 17 (3-4), 739–752. doi:10.1007/s11740-022-01160-9
Managing Variety in Manufacturing
ElMaraghy, H.
2014. Procedia CIRP, 17, 1–2. doi:10.1016/S2212-8271(14)00784-7
Hybrid Monte Carlo tree search based multi-objective scheduling
Hofmann, C.; Liu, X.; May, M.; Lanza, G.
2022. Production Engineering, 17, 133–144. doi:10.1007/s11740-022-01152-9
Opportunistic maintenance scheduling with deep reinforcement learning
Valet, A.; Altenmüller, T.; Waschneck, B.; May, M. C.; Kuhnle, A.; Lanza, G.
2022. Journal of Manufacturing Systems, 64, 518–534. doi:10.1016/j.jmsy.2022.07.016
Ultrasonic evaluation of elastic properties in laser powder bed fusion manufactured AlSi10Mg components
Czink, S.; Dietrich, S.; Schulze, V.
2022. NDT & E International, 132, Article no: 102729. doi:10.1016/j.ndteint.2022.102729
Deep Learning for the Detection of Car Flap States
Guérand, B.; Scheer, F.; Demetgül, M.; Fleischer, J.
2022. Journal of WSCG, 2022, 142–151. doi:10.24132/CSRN.3201.18
Product allocation and network configuration in global production networks – An integrated optimization approach
Klenk, F.; Kerndl, F.; Heidinger, F.; Benfer, M.; Peukert, S.; Lanza, G.
2022. Production Engineering, 17 (1), 117–132. doi:10.1007/s11740-022-01149-4
The Role of Intangible Influencing Factors in Strategic Network Decision-Making [in press]
Steier, G. L.; Silbernagel, R.; Maier, T.; Peukert, S. K.; Lanza, G.
2022. 29th EurOMA Conference, July 1 - 6, 2022. Book of Proceedings
Digitale Transformation in global produzierenden Unternehmen = Digital Transformation in global manufacturing companies
Steier, G.; Schäfer, L.; Moser, S.; Kandler, M.; Lanza, G.
2022. WT Werkstattstechnik, 112 (5), 314–319. doi:10.37544/1436–4980–2022–5–44
Secure Clamping of Parts for Disassembly for Remanufacturing
Rieß, S.; Wiedemann, J.; Coutandin, S.; Fleischer, J.
2022. Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Ed.: T. Schüppstuhl, 79–87, Springer International Publishing. doi:10.1007/978-3-030-74032-0_7
KI-Assistenzsysteme in der Produktentwicklung
Schäfer, L.; Krahe, C.
2022. Potentiale digitaler Führung und Technologien für die Teaminteraktion von morgen : Zwischenbericht des vom BMBF geförderten Forschungs- und Entwicklungsprojektes im Rahmen des Programms. Hrsg.: G. Lanza, 68 – 74, TEWISS Verl
Automated Derivation of Optimal Production Sequences from Product Data
Schäfer, L.; Frank, A.; May, M. C.; Lanza, G.
2022. Procedia CIRP, 107, 469–474. doi:10.1016/j.procir.2022.05.010
New Competences in a Digitalized Shopfloor – A Modular Training Concept for Learning Factories
Schäfer, L.; Ströhlein, K.; Kandler, M.; Hulla, M.; Ast, J.; Lanza, G.; Nieken, P.; Ramsauer, C.; Nyhuis, P.
2022. SSRN eLibrary, Art.-Nr. 4071822. doi:10.2139/ssrn.4071822
A Circular Economy Strategy Selection Approach: Component-based Strategy Assignment using the Example of Electric Motors
Benfer, M.; Gartner, P.; Klenk, F.; Wallner, C.; Jaspers, M.-C.; Peukert, S.; Lanza, G.
2022. Proceedings of the Conference on Production Systems and Logistics : CPSL 2022, 17th May 2022 – 20th May 2022 University of British Columbia Vancouver, Canada. Ed.: D. Herberger, 22–31, publish-Ing. doi:10.15488/12133
Selection of traceability-based, automated decision-making methods in global production networks
Fessenmayr, F.; Benfer, M.; Gartner, P.; Lanza, G.
2022. Procedia CIRP, 107, 1349–1354. doi:10.1016/j.procir.2022.05.156
Influence of workpiece orientation for multimaterial measurements in dimensional computed tomography
Höger, K.; Schild, L.; Lanza, G.
2022. The e-journal of nondestructive testing & ultrasonics, 27 (03), Art.-Nr. 26582
Individuelle Knieimplantate wirtschaftlich fertigen
Schulze, V.; Lanza, G.; Zanger, F.; Gartner, P.; Fischmann, P.
2021, July
5G in der Industrie. Wege in die Technologieführerschaft in Produktentwicklung und Produktion
Albers, A.; Fleischer, J.; Gönnheimer, P.; Mühlbeier, E.; Schlagenhauf, T.; Wäschle, M.; Anderl, R.; Giese, T.; Wang, Y.; Aurich, J.; Glatt, M.; Litsche, S.; Steglich, S.
2021. acatech - Deutsche Akademie der Technikwissenschaften. doi:10.48669/aca_2021-2
Leitfaden Antriebstechnik 4.0: Digitalisierungstrends für Produkt, Produktion und Lieferkette
Fleischer, J.; Lanza, G.; Wirth, F.; Gönnheimer, P.; Peukert, S.; May, M.; Hausmann, L.; Fraider, F.; Netzer, M.; Oexle, F.; Silbernagel, R.; Overbeck, L.
2021. VDMA Antriebstechnik
Additive manufacturing of continuous fibre-reinforced plastic components by a novel laser-sintering process
Baranowski, M.; Beichter, S.; Griener, M.; Coutandin, S.; Fleischer, J.
2021. Innovating towards perfection : SAMPE Europe Conference 2021 Baden/Zurich : Baden/Zurich, Switzerland and online, 29-30 September 2021, 21–26, Society for the Advancement of Material and Process Engineering (SAMPE)
Enhancement of Groove Turning Performance by Additively Manufactured Tool Holders with Internal Cooling Channels and Combined Cooling Strategies
Lubkowitz, V.; Reothia, N.; Zanger, F.
2021. New production technologies in aerospace industry : proceedings 2021 : MIC2021, 21st Machining Innovations Conference for Aerospace Industry :Hanover, December 1st and 2nd 2021. Ed.: Berend Denkena, 50–55, TEWISS Verlag. doi:10.2139/ssrn.3922719
Main time-parallel mechanical surface treatment and surface texturing during machining
Schwalm, J.; Mann, F.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2022. Procedia CIRP, 108, 240–245. doi:10.1016/j.procir.2022.03.042
Gripper integrated vision system for on-the-fly position measurement of individual components in fuel cell stacking
Schäfer, J.; Fleischer, J.
2022. FC³ - Fuel Cell Conference Chemnitz 2022, 31.5.-1-6-2022 Chemnitz, 9 S., HZwo
Gripper integrated vision guided assembly of PEM fuel cells
Schäfer, J.; Allmendinger, S.; Fleischer, J.
2022. Procedia CIRP, 106, 180–184. doi:10.1016/j.procir.2022.02.175
Framework for the Application of Industry 4.0 in Lithium-Ion Battery Cell Production
Schmied, J.; Puchta, A.; Scharmann, T.; Töpper, H.-C.; Kampker, A.; Jürgen, F.; Dröder, K.; Daub, R.
2022. Proceedings of the Conference on Production Systems and Logistics, CPSL 17th - 20th May, Vancouver 2022, 151–160, Leibniz Universität Hannover. doi:10.15488/12168
Agile Production Systems for Electric Mobility
Fleischer, J.; Fraider, F.; Kößler, F.; Mayer, D.; Wirth, F.
2022. Procedia CIRP Volume 107, 107, 1251–1256. doi:10.1016/j.procir.2022.05.140
Vision-Based Screw Head Detection for Automated Disassembly for Remanufacturing
Mangold, S.; Steiner, C.; Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 105. doi:10.1016/j.procir.2022.02.001
Analysis of chip segmentation frequencies in turning Ti-6Al-4V for the prediction of residual stresses
Pachnek, F.; González, G.; Diaz Ocampo, D.; Heizmann, M.; Zanger, F.
2022. Procedia CIRP, 108, 188–193. doi:10.1016/j.procir.2022.03.033
Modeling of surface hardening and roughness induced by turning AISI 4140 QT under different machining conditions
Stampfer, B.; Bachmann, J.; Gauder, D.; Böttger, D.; Gerstenmeyer, M.; Lanza, G.; Wolter, B.; Schulze, V.
2022. Procedia CIRP, 108, 293–298. doi:10.1016/j.procir.2022.03.050
Effect of thermomechanical loads and nanocrystalline layer formation on induced surface hardening during orthogonal cutting of AISI 4140
González, G.; Sauer, F.; Plogmeyer, M.; Gerstenmeyer, M.; Bräuer, G.; Schulze, V.
2022. Procedia CIRP, 108, 228–233. doi:10.1016/j.procir.2022.03.040
Automated Configuration of Modular Gripper Fingers
Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 106, 70–75. doi:10.1016/j.procir.2022.02.157
Keine Angst vor Künstlicher Intelligenz in der Produktion
Armbruster, J.; Gönnheimer, P.; Netzer, M.
2022, April
Novel Robot-Based Process Chain for the Flexible Production of Thermoplastic Components with CFRP Tape Reinforcement Structures
Matkovic, N.; Kupzik, D.; Steidle-Sailer, C.; Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 106, 21–26. doi:10.1016/j.procir.2022.02.149
Conceptual control architecture for future highly flexible production systems
Mühlbeier, E.; Oexle, F.; Gerlitz, E.; Matkovic, N.; Gönnheimer, P.; Fleischer, J.
2022. Procedia CIRP, 106, 39–44. doi:10.1016/j.procir.2022.02.152
Misalignment Detection on Linear Feed Axis with FFT and Statistical Analysis using Motor Current
Demetgül, M.; Gu, M.; Jonas, H.; Zhao, Y.; Gönnheimer, P.; Fleischer, J.
2022. Journal of Machine Engineering, 22 (2), 31–42. doi:10.36897/jme/147699
Product-Production-CoDesign: An Approach on Integrated Product and Production Engineering Across Generations and Life Cycles
Albers, A.; Lanza, G.; Klippert, M.; Schäfer, L.; Frey, A.; Hellweg, F.; Müller-Welt, P.; Schöck, M.; Krahe, C.; Nowoseltschenko, K.; Rapp, S.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 167–172, Elsevier. doi:10.1016/j.procir.2022.05.231
SyProLei - A systematic product development process to exploit lightweight potentials while considering costs and CO2 emissions
Kaspar, J.; König, K.; Scholz, J.; Quirin, S.; Kleiner, S.; Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 520–525, Elsevier. doi:10.1016/j.procir.2022.05.288
AI based geometric similarity search supporting component reuse in engineering design
Krahe, C.; Marinov, M.; Schmutz, T.; Hermann, Y.; Bonny, M.; May, M.; Lanza, G.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 275–280, Elsevier. doi:10.1016/j.procir.2022.05.249
Wandlungsfähige Produktion für die Kreislaufwirtschaft
Beyerer, J.; Bretthauer, G.; Hofmann, C.; Lanza, G.
2022. at - Automatisierungstechnik, 70 (6), 501–503. doi:10.1515/auto-2022-0063
Product-Mix Allocation
Klenk, F.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management – From Excellent Plants Toward Network Optimization. Ed.: T. Friedli, 129–141, Springer International Publishing. doi:10.1007/978-3-030-72740-6_9
Decision Experiments in the Learning Factory: A Proof of Concept
Ströhlein, K.; Gorny, P. M.; Kandler, M.; Schäfer, L.; Nieken, P.; Lanza, G.
2022. Proceedings of the 12th Conference on Learning Factories (CLF 2022), Art.-Nr. 4072356, SSRN. doi:10.2139/ssrn.4072356
Life cycle assessment (LCA) of a battery home storage system based on primary data
Jasper, F. B.; Späthe, J.; Baumann, M.; Peters, J. F.; Ruhland, J.; Weil, M.
2022. Journal of Cleaner Production, 366, Article: 132899. doi:10.1016/j.jclepro.2022.132899
Der Mensch im Fokus : Integration von Assistenzsystemen entlang einer Montagelinie für Elektromotoren = Focus on People : Integration of Assistance Systems along an Assembly Line for Electric Motors
Dvorak, J.; Kandler, M.; Clever, F.; Mahanty, W.; Beiner, S.; Lanza, G.; Kinkel, S.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (6), 415–418. doi:10.1515/zwf-2022-1071
Mechanical surface treatment of EBM Ti6Al4V components: Effects of the resulting surface layer state on fatigue mechanisms and service life
Damon, J.; Czink, S.; Schüßler, P.; Antusch, S.; Klein, A.; Send, S.; Dapprich, D.; Dietrich, S.; Schulze, V.
2022. Materials Science and Engineering: A, 849, Art.-Nr. 143422. doi:10.1016/j.msea.2022.143422
MotorFactory: A Blender Add-on for Large Dataset Generation of Small Electric Motors
Wu, C.; Zhou, K.; Kaiser, J.-P.; Mitschke, N.; Klein, J.-F.; Pfrommer, J.; Beyerer, J.; Lanza, G.; Heizmann, M.; Furmans, K.
2022. Procedia CIRP, 106, 138–143. doi:10.1016/j.procir.2022.02.168
An ontology for remanufacturing systems = Eine Ontologie für Remanufacturing-Systeme
Pfrommer, J.; Klein, J.-F.; Wurster, M.; Rapp, S.; Grauberger, P.; Lanza, G.; Albers, A.; Matthiesen, S.; Beyerer, J.
2022. at - Automatisierungstechnik, 70 (6), 534–541. doi:10.1515/auto-2021-0156
Agiles Produktionssystem mittels lernender Roboter bei ungewissen Produktzuständen am Beispiel der Anlasser-Demontage = Concept of an agile production system based on learning robots applied to disassembly
Lanza, G.; Asfour, T.; Beyerer, J.; Deml, B.; Fleischer, J.; Heizmann, M.; Furmans, K.; Hofmann, C.; Cebulla, A.; Dreher, C.; Kaiser, J.-P.; Klein, J.-F.; Leven, F.; Mangold, S.; Mitschke, N.; Stricker, N.; Pfrommer, J.; Wu, C.; Wurster, M.; Zaremski, M.
2022. at - Automatisierungstechnik, 70 (6), 504–516. doi:10.1515/auto-2021-0158
Integrierte Steuerungsarchitektur für ein agiles Demontagesystem mit autonomer Produktbefundung = ntegrated control architecture for an agile disassembly system with autonomous product inspection
Wurster, M.; Klein, J.-F.; Kaiser, J.-P.; Mangold, S.; Furmans, K.; Heizmann, M.; Fleischer, J.; Lanza, G.
2022. at - Automatisierungstechnik, 70 (6), 542–556. doi:10.1515/auto-2021-0157
Dynamic Partial Reconfiguration for Adaptive Sensor Integration in Highly Flexible Manufacturing Systems
Schade, F.; Karle, C.; Mühlbeier, E.; Gönnheimer, P.; Fleischer, J.; Becker, J.
2022. Procedia CIRP, 107, 1311–1316. doi:10.1016/j.procir.2022.05.150
Assessing the optical configuration of a structured light scanner in metrological use
Schild, L.; Sasse, F.; Kaiser, J.-P.; Lanza, G.
2022. Measurement Science and Technology, 33 (8), Art.-Nr.: 085018. doi:10.1088/1361-6501/ac6e2f
EUREKA Projekt "Qualitätsorientierte Fertigung von Freiformflächen" - Eine Übersicht
Fleischer, J.
1991. Konstruktion und Fertigung von Freiformflächen. Karlsruher Kolloquium, 1991. Tagungsbd. Hrsg.: K. Boes
Wirkmechanismen und Verschleissanalyse im Tribosystem Zerspanung Kolloquium zum DFG-Schwerpunktprogramm
Brinksmeier, E.; Riemer, O.; Meyer, W.; Schmidt, J.; Walter, U.
1995. Wirkflächenreibung bei inelastischer Verformung metallischer Werkstoffe: Berichtskolloquium zum DFG-Schwerpunktprogramm Wirkflächenreibung ... am 14. Sept. 1995 in Hannover. Wiss. Leitung: Eckart Doege, Institut für Umformtechnik und Umformmaschinen (IFUM)
Geregelte Nachgiebigkeit bei Räummaschinenantrieben- ein Weg zur optimalen Prozessführung
Schmidt, J.; Wilke, O.
1996. 12. Aachener Fluidtechnisches Kolloquium, 327–344
Trockenbearbeitung beim Wälzstossen
Doerfel, O.
1997. Maschinenmarkt
Trockenbearbeitung, Spannungsquerschnittsoptimierung
Doerfel, O.
1998. METAV 1998, die Internationale Messe für Fertigungstechnik und Automatisierung, 16. - 20. Juni 1998, Messe Düsseldorf, Verein Deutscher Werkzeugmaschinenfabriken e.V. (VDW)
Trockenzerspanung von Alu-Knetlegierungen: Teilprojekte Fräsen, Bohren und Reiben“
Doerfel, O.; Müller-Hummel, P.; Berky, D.; Brunkhorst, W.; Donnerhauer, F.; Ende, W.; Haberkam, B.; Höchst, S.; Kalhöfer, E.; Kaufeld, M.; Kosuch. N.; Lahres, M.; Liu, X.; Mense, L.; Scholta, E.; Wagner, E.; Walter, J.; Wirtz, R.
1998. Trockenbearbeitung prismatischer Teile : Abschlußpräsentation des BMBF/PFT-Projektes ; Tagung Aachen, 30. und 31. März 1998, VDI Verlag
Micromilling of Ferrous Materials
Weule, H.; Schmidt, J.; Hüntrup, V.; Tritschler, H.
1999. Production engineering, 7, 17–20
Mikrozerspante Formeinsätze aus Stahl
Schmidt, J.; Hüntrup, V.; Tritschler, H.
1999. wt Werkstattstechnik online, (11), 495–498
Advantages and Characteristics of a Dynamic Feed Axis with Ball Screw Drive and Driven Nut
Weule, H.; Frank, T.
1999. CIRP Annals Manufacturing Technology, 48 (1), 303–306. doi:10.1016/S0007-8506(07)63189-8
Industrielles Engagement ist gefragt
Weule, H.
1999. wt Werkstattstechnik online, 89, 477–478
Trockenbearbeitung - Die Herausforderung fuer die Zerspanungstechnik
Schmidt, J.; Huehsam, A.; Doerfel, O.; Fillibeck, J.
1999. VDI-Tagung Trockenbearbeitung, 08.03.1999-09.03.1999 Karlsruhe
Dry Cutting for Gear Shaping
Schmidt, J.; Huehsam, A.
1999. Proceedings of the 4th World Congress of Gearing and Power Transmission (WCGPT’99), Paris, France, 16-17 mars 1999
Rechnerunterstuetzte Produktion mit fuenfachsigen spanenden Bearbeitungseinrichtungen
Schmidt, J.; Konold, T.; et al
1999. A. Storr; H. Ströhle; J. Schmidt; T. Konold et al.: wt Werkstattstechnik 89 (1999), 89 (3), 78–82
Das Internationale Department an der Universitaet Karlsruhe (TH)
Weule, H.; Suchy, U.
1999. Problemkreise der Angewandten Kulturwissenschaft, 177–185, Zentrum für Angewandte Kulturwissenschaft (ZAK)
Re-Use of assembly systems - A great economic potential for recycling
Schmälzle, A.; Trender, L.
1999. Re-use : proceedings, 2nd International Working Seminar March 1-3, 1999. Eindhoven
Micro-milling of Steel for Mold Manufacturing - Influences of Material, Tools and Process Parameters-
Spath, D.; Hüntrup, V.
1999. Precision engineering - nanotechnology : proceedings of the 1st International EUSPEN conference; [May 31st - June 4th 1999, Bremen, Germany], Shaker
Mikrosystemtechnik- Wann kommt der Durchbruch? -Länderreport Japan-
Hüntrup, V.; Cuhls, K.; Schünemann, M.
1999. Vortrag anlässlich des Symposiums "Mikrosystemtechnik- Wann kommt der Durchbruch?"
Chef mit Forscherhorizont - Existenzgründungen aus dem forschungsnahen Umfeld
Weule, H.; Hüntrup, V.
1999. Wissenschaftsmanagement, 5 (1), 12–18
Boron and silicon based dry lubricant coatings for forming and cutting tools
Benien, H.; Huehsam, A.; Baumstark, M.
2000. Materials Week, 25.9.-28.9., München, (im Rahmen der. Materialica 2000), MAT INFO Werkstoff-Informationsgesellschaft mbH
Durchgaengige Entwurfsmethodik und Simulation dezentraler Steuerungselemente fuer mechatronische Systeme in der Automatisierungstechnik
Dambacher, U.
2000. 3. Kolloquium zum Schwerpunktprogramm Entwurf und Entwurfsmethodik eingebetteter Systeme 16.10.2000-17.10.2000
Wiederverwendung von Montageanlagen
Buchholz, C.; Schmälzle, A.
2000. Umweltgerechte Produktentwicklung: ein Leitfaden für Entwicklung und Konstruktion. Beteiligt: Herbert Birkhofer, Losebl.-Ausg, Deutsches Institut für Normung (DIN)
Zerspankraftmessung und Randschichtcharakterisierung beim Hochgeschwindigkeits-Stirnplanfräsen
Biesinger, F.; Soehner, J.; Schulze, V.; Voehringer, O.; Weule, H.
2000. Spanen metallischer Werkstoffe mit hohen Geschwindigkeiten : Kolloquium des Schwerpunktprogramms der Deutschen Forschungsgemeinschaft am 18.11.1999 in Bonn. Hrsg.: H. K. Tönshoff; F. Hollmann
Integriertes Forschungs- und Entwicklungsmanagement
Weule, H.
2001. Carl Hanser Verlag
Aspects of materials science and production engineering at high-speed-cutting processes and their finite-element simulation
Biesinger, F.; Soehner, J.; Schulze, V.; Voehringer, O.; Weule, H.
2001. Actes de la conférence / Troisième Conférence Internationale sur la Coupe des Métaux et l’Usinage à Grande Vitesse : June 27, 28, 29, 2001, Metz, France / [Ecole Nationale d’Ingénieurs de Metz; Université de Metz; Technische Universität Darmstadt ...]. Actes de la conférence. Vol. 2: Posters . Ed. by D. Dudzinski ..., 67–71, Ecole Nationale d’Ingénieurs (eniM)
Characterization of surface and subsurface regions of HSC-milled steel
Biesinger, F.; Thiel, M.; Schulze, V.; Voehringer, O.; Krempe, M.; Wendt, U.
2001. Scientific Fundamentals of HSC. Ed.: Herbert Schulz, Hanser Gardner Publications, Inc
Tool Wear Prediction and Verification in Orthogonal Cutting
Schmidt, J.; Weule, H.; Schmidt, C.; Yen, Y.; Frank, P.; Altan, T.
2003. Proceeding of Sixth CIRP International Workshop on Modelling of Machining Operations, Hamilton, Canada, 19th-20th May 2003, 93–100
Klein aber oho!
Walcher, H.; Kugele, H.; Fleischer, J.; Buchholz, C.
2003. Form + Werkzeug, 1 (4), 46–47
Effectiveness of Knowledge Management
Fleischer, J.; Stepping, A.
2003. Integrating Human Aspects in Production Management. Ed.: G. Zülch, 187–201, Kluwer Academic Publishers. doi:10.1007/0-387-23078-5_15
Computer Based Prediction and Experimental Analysis of Micro End Milling of Steel
Schmidt, J.; Bouzakis, K.; Efstathiou, K.; Tritschler, H.
2003. High Aspect Ratio Micro-structure Technology: HARMST 2003, Fifth Biennial Workshop, Monterey, California, USA, 15th-17th June 2003, 259
Tool Design for Micro End Milling of Hardened Steel
Schmidt, J.; Tritschler, H.
2002. Proceedings of the International Colloquium on Production Science. Gdańsk, April 15th 2002. Ed. D. Spaht
Factory Planning Methodology for the Production of Micro-Mechatronical Systems
Fleischer, J.; Weule, H.; Volkmann, T.
2003. Micro engineering : design and industrial manufacture of products based on micro and nano technology ; proceedings of the 1st International CIRP Seminar on Micro and Nano Technology, Copenhagen, Denmark, November 13 - 14, 2003. Ed.: H. N. Hansen .
Electrodes for micro-EDM
Schmidt, J.; Fleischer, J.; Knoll, M.
2003. EUSPEN international topical conference on precision engineering, micro technology, measurement techniques and equipment, Aachen, 19.05. - 20.05.2003, 177–179
Investigation on the International State of Art of Micro Production Technology
Weule, H.; Fleischer, J.; Buchholz, C.; Tritschler, H.; Elsner, J.; Knoll, M.; Hasselbach, J.; Raatz, A.; Wrege, J.; Herrmann, H.; Klocke, F.; Weck, M.; Bodenhausen, J. von; Klitzing, A. von
2003. Proceedings of the EUSPEN International Topical Conference. EUSPEN international topical conference on precision engineering, micro technology, measurement techniques and equipment (2003), Aachen, Deutschland, 19.05.2003–20.05.2003, 11–22, Rhiem
Dry Machining: A Technology facing an increasing Demand
Dyck, M.
2003. 30th Annual Conference of the European Cutting Tool Association (ECTA), San Sebastian, Spain, 25th-27th May 2023
Produktionstechnik für Mikrosysteme
Weule, H.; Buchholz, C.
2003. M. Geiger & A. Otto (Eds.), Laser in der Elektronikproduktion & Feinwerktechnik : Tagungsband ; 17 Fachbeiträge aus Industrie und Hochschule / LEF 2003. Hrsg.: M. Geiger, A. Otto, Meisenbach
Microstructure, surface topography and mechanical properties of slip cast and powder injection moulded microspecimens made of circonia
Auhorn, M.; Kasanicka, B.; Beck, T.; Schulze, V.; Löhe, D.
2003. International journal of materials research, 94 (5), 599–605. doi:10.1515/ijmr-2003-0104
Klein und doch belastbar - Potenziale des Mikro-Pulverspritzgießens für die Massenproduktion
Fleischer, J.; Buchholz, C.; Walcher, H.; Maetzig, M.; Kugele, H.; Cremer, I.
2004. Mikroproduktion, (1), 46–48
2D Tool Wear Estimation Using Finite Element Method
Fleischer, J.; Schmidt, J.; Schmidt, C.; Xie, L.; Biesinger, F.
2004. Elsevier (Ed.), 7th CIRP International Workshop on Modeling of Machining Operations: 4–5 May 2004, Cluny, France
Automatisierung des Mikro-Pulverspritzgussprozesses
Fleischer, J.; Weule, H.; Buchholz, C.
2004. Tagungsband Statuskolloquium - Sonderforschungsbereich 499, 205–213
Optimization of a Machine Tool with Hybrid Kinematics Structure Using Coupled Multi-Body Simulation and Finite Element Analysis
Fleischer, J.; Stengel, G.; Neithardt, W.; Albers, A.; Broos, A.; Schmidt-Ewig, J.-P.
2004. Parallel Kinematic Machines in Research and Practice: The 4th Chemnitz Parallel Kinematics Seminar. Ed.: R. Neugebauer, 545–556, Verlag Wissenschaftliche Skripten
Parameteroptimierung bei Werkzeugmaschinen - Anwendungsmöglichkeiten und Potentiale
Fleischer, J.; Broos, A.
2004. Weimarer Optimierungs-und Stochastiktage 1.0: 2.–3. Dezember 2004
Stand der Technik und Trends in der Mikroproduktionstechnik
Kotschenreuther, J.
2004. 5. Fachtagung Mikroproduktionstechnik: 23–25 June 2004, Karlsruhe, Germany
TCO - Prognose bei einem Werkzeugmaschinenhersteller
Bechle, A.
2004. Im: Tagungsband der Herbsttagung "Life-Cycle-Performance". Hrsg. Jürgen Fleischer, wbk Institut für Produktionstechnik
Applications for Structuring with Micro-End-Milling
Kotschenreuther, J.
2004. International Workshop on Micromechatronics and Micro and Nano Fabrications: 5–6 October 2004, Karlsruhe, Germany
Bahngenerierung für eine robotergeführte Abtrenneinheit für räumlich gekrümmte Strangpressprofile
Fleischer, J.; Stengel, G.
2004. wt Werkstattstechnik online, 94 (9), 457–461
International State of the art of Micro Production Technology
Hesselbach, J.; Raatz, A.; Wreg, J.; Herrman, H.; Illenseer, S.; Weule, H.; Fleischer, J.; Buchholz, C.
2004. Production engineering, 11, 29–36
lnfluences of Process Scaling in Metal Cutting with Geometrically Defined Cutting Edges
Kotschenreuther, J.; Delonnoy, L.; Hochrainer, T.; Schmidt, J.; Fleischer, J.; Schulze, V.
2004. Proceedings of the 4th EUSPEN (European Society for Precision Engineering and Nanotechnology) International Conference 2004. Ed.: P. Atherton, 173–174, European Society for Precision Engineering and Nanotechnology (euspen)
Diagnose elektrohydraulischer Anlagen am Beispiel einer Stanzmaschine
Fleischer, J.; Rus, T.; Gutmann, M.
2004. VDI-Berichte, (1826), 101–116
Mikro-Produktionstechnik - auf dem Weg zur vollständigen Prozessautomatisierung
Fleischer, J.; Tritschler, H.; Kotschenreuther, J.; Buchholz, C.
2004. VDI-Z, 59–61
Effektivität von Wissensmanagement
Fleischer, J.; Stepping, A.
2004, June. b-wise GmbH Business Wissen Information Service
Wertschöpfung in Netzwerken: Integrierte Planungsmethodik zur Konfiguration von globalen Wertschöpfungsnetzwerken
Fleischer, J.; Herm, M.; Schell, M.-O.
2004. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 99 (9), 470–476. doi:10.3139/104.100807
Mikroproduktionstechnik - Internationaler Stand und Ausblick
Fleischer, J.; Buchholz, C.; Behrens, I.
2004. Inno, 9, 4–7
Wälzschälen - ein Verfahren wird wiederentdeckt
Schmidt, J.; Bechle, A.
2004. Werkstatt und Betrieb, (6), 72–75
Simulation – Optimization of Work Piece Handling in Machine Tools
Abele, E.; Fürderer, B.; Wieser, J.
2005. Proceedings of International PACE Forum Digital Manufacturing 2005
Simulation von Zerspanungsprozessen mit ABAQUS
Fleischer, J.; Schmidt, C.; Schermann, T.; Marsolek, J.
2005. 17. Deutschsprachige ABAQUS-Benutzerkonferenz 2005: Tagungsband. Hrsg.: M. Knops, ABAQUS Deutschland GmbH
A Concept for the Configuration and Optimization of Global Value Added Networks Based on Business Capabilities
Fleischer, J.; Herm, M.; Peter, K.; Sternemann, K.-H.
2005. G. Reinhart & M. Zäh (Eds.), 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 05). Hrsg.: G. Reinhart, utzverlag
Simulation-Based Optimization of Work Piece Handling in Agile Manufacturing Systems
Fleischer, J.; Stepping, A.; Wieser, J.
2005. G. Reinhart & M. Zäh (Eds.), 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 05). Hrsg.: G. Reinhart, 93–98, utzverlag
Handhabungsgerechte Werkzeugmaschinen für die künftige Serienfertigung kubischer Teile
Volkmann, T.; Wieser, J.
2005. 14. Deutscher VDI Materialfluss-Kongress: 7.–8. April 2005, Garching bei München
Lifecycle Cost-Modelling for Machinery with Specified Availability Levels
Fleischer, J.; Nesges, D.
2005. 3rd International Conference on Reconfigurable Manufacturing: University of Michigan, Ann Arbor, USA, 10.-12. Mai 2005
Adaptronische hydrostatische Drucktascheneinheit für aktive hydrostatische Führungssysteme
Fleischer, J.; Munzinger, C.; Knödel, A.
2005. Adaptronic Congress 2005: 31. Mai–1. Juni 2005, Göttingen
Meta Data as a basis for the context sensitive provision of information
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. 12th European Concurrent Engineering Conference 2005 : ECEC 2005 ; April 11 - 13, 2005, Toulouse, France. Ed.: A. Benzekri, 98–102, The European Multidisciplinary Society for Modelling and Simulation Technology (EROSIS-ETI)
Optimization of critical processes within an automated process-chain for the Micro-PIM Process
Fleischer, J.; Buchholz, C.; Weule, H.
2005. EUSPEN 2005 - Proceedings of the 5th International Conference of the European Society for Precision Engineering and Nanotechnology. Ed.: F. Chevrier
Automated process chain for the manufacturing of micro parts by powder-injection-molding
Fleischer, J.; Kotschenreuther, J.; Buchholz, C.
2005. The 38th CIRP International Seminar on Manufacturing Systems: May 16/18, 2005, Florianópolis, SC, Brazil
A Method to configure Value Added Networks based on Business Capabilities
Fleischer, J.; Herm, M.
2005. The 38th CIRP International Seminar on Manufacturing Systems: May 16/18, 2005, Florianópolis, SC, Brazil
Parameter Optimization in Combination with Finite Element Analysis and Multi-Body-Simulation: One Way towards Better Machine Tools Design
Fleischer, J.; Broos, A.; Will, J.
2005. NAFEMS World Congress 2005: Engineering Simulation - Best Practices and Visions of the Future ; St Julians, Malta, 17th–20th May 2005
Simulationsgestützte Optimierung in agilen Fertigungssystemen
Fleischer, J.; Wieser, J.; Lau, C.
2005. eM-Plant Usermeeting: 14.10.2005
Automation of the Micro-PIM-Process
Weule, H.; Fleischer, J.; Buchholz, C.
2005. Micro-Engineering Metals and Ceramics - Part I: Design, Tooling, and Injection Molding, John Wiley and Sons
Reif für den seriellen Einsatz
Schmidt, J.; Bechle, A.
2005. VDMA-Nachrichten
Prozesssichere automatisierte Produktion von hochbelastbaren Mikro-PIM-Zahnrädern
Fleischer, J.; Schlipf, M.; Dieckmann, A.-M.; Kugele, H.; Cremer, I.; Walcher, H.
2005. Mikroproduktion, 3, 50–53
Simulationsunterstützte Optimierung in Agilen Fertigungssystemen
Fleischer, J.; Stepping, A.; Wieser, J.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (1-2), 32–35. doi:10.3139/104.100862
Prozessorientierte Informationsbereitstellung in produzierenden Unternehmen
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. Industrie-Management, 21 (1), 17–20
Digitaler Serienlauf beschleunigt den Markteintritt
Fleischer, J.; Nyhuis, P.; Wawerla, M.; Ender, T.; Heins, M.; Großhenning, P.
2005. Intelligenter produzieren, 36–37
Einflussgrößen und Randbedingungen bei der Zerspansimulation mit ABAQUS
Schermann, T.
2005. 1. Karlsruher Simulationssymposium: 30.11.2005
Kopplung von Mehrkörpersimulation und Topologieoptimierung
Tröndle, M.; Minx, J.
2006. Abschlussbericht des Verbundprojektes "Integration von CA-Techniken zur ganzheitlichen Simulation und Optimierung von Fertigungseinrichtungen vom CAD bis hin zur Hardware-in-the-Loop-Simulation (SimCAT)": Tagungsband zum Abschlusskolloquium ; Karlsruhe, 14.11.2006, 85–94, Universität Karlsruhe (TH)
Workpiece and Tool Handling in Metal Cutting Machines
Fleischer, J.; Denkena, B.; Winfough, B.; Mori, M.
2006. Annals of the CIRP Vol. 55/2/2006., 55 (2), 817–839. doi:10.1016/j.cirp.2006.10.009
Methodical Planning Approach for Flexible and Scalable Assembly of Micro-Mechatronical Products
Fleischer, J.; Volkmann, T.; Krahtov, L.
2006. First CIRP International Seminar on Assembly Systems: November 15 – 17, 2006. Ed.: E. Westkämper, 49–54, Fraunhofer IRB Verlag
Zustandsprognose auf Basis von konsequenter Online-Diagnose an hoch belasteten Maschinenkomponenten
Fleischer, J.; Schopp, M.; Schmalzried, S.
2006. AKIDA (Ed.), Tagungsband zum 6. Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung (AKIDA), 439–446, RWTH Aachen
Post processing of EDM-machined microstructures by ultra short pulsed laser ablation
Fleischer, J.; Schmidt, J.; Haupt, S.
2006. ICALEO (Ed.), 25th International Congress on applications of laser & electro-optics (ICALEO 2006) Hrsg.: ICALEO. 30–November 2, 2006. Scottsdale, AZ, USA October, M305, Laser Institute of America. doi:10.2351/1.5060889
Simulation von Zerspanprozessen unter Berücksichtigung des dynamischen Maschinenverhaltens
Fleischer, J.; Schermann, T.; Schmidt, C.; Marsolek, J.
2006. Tagungsband. 18. Deutschsprachige ABAQUS-Benutzerkonferenz 2006: 18. und 19. September 2006, Erfurt. [Proceedings]. Hrsg.: M. Küssner
Hochintegrierte adaptronische Stellachse für Linearbewegungen im Mikrometerbereich
Fleischer, J.; Munzinger, C.; Weis, M.
2006. Elektrisch-mechanische Antriebssysteme: Innovationen, Trends, Mechatronik ; Tagung Böblingen, 27. und 28. September 2006, 49–58, VDI Verlag
Designing Adaptronical Components for Compensation of Static and Quasi-Static Loads
Fleischer, J.; Knödel, A.; Munzinger, C.; Weis, M.
2006. ASME (Ed.), Volume 2: 30th Annual Mechanisms and Robotics Conference, Parts A and B. ASME. Philadelphia, PA, USA, 10.09.2006–13.09.2006, 13–22, ASMEDC. doi:10.1115/DETC2006-99461
Robotergestützte Herstellung räumlich gekrümmter Aluminiumprofile
Stengel, G.
2006. 2. Fraunhofer IPA Workshop „Bearbeiten mit Industrierobotern“: 21. Juni 2006, Stuttgart-Vaihingen
Thermal micro-sinter-joining as a potential enhancement for an automated process chain for μPIM Bevel Gears
Fleischer, J.; Dieckmann, A.-M.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 112–115, European Society for Precision Engineering and Nanotechnology (euspen)
Plant Planning Projects in Value Added Networks
Fleischer, J.; Stepping, A.; Peter, K.
2006. 5th CIRP International Seminar on Intelligent Computation Manufacturing Engineering (CIRP ICME 06): 25–28 July 2006, Ischia, Italy, 659–663
Capillary Tool Electrode with Fluid Removal Medium for Wear Compensation in EDM
Fleischer, J.; Schmidt, J.; Halvadjiysky, G.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 441–444, European Society for Precision Engineering and Nanotechnology (euspen)
Calculation and optimisation model for costs and effects of availability relevant service elements
Fleischer, J.; Weismann, U.; Niggeschmidt, S.
2006. Towards a closed loop economy: LCE 2006 ; proceedings of the 13th CIRP International Conference on Life Cycle Engineering ; held at the Katholieke Universiteit Leuven, Belgium, May 31st - June 2nd, 2006. Ed.: J. R. Duflou, 675–680, Katholieke Universiteit Leuven (KU Leuven)
Flexible Platform for the Production of Micro-Mechatronical Products
Fleischer, J.; Volkmann, T.; Krahtov, L.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th–June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 180–183, European Society for Precision Engineering and Nanotechnology (euspen)
Conception of a scalable production for micro-mechatronical products: Systematics for planning and platform with process modules for the production of micro-mechatronical products
Fleischer, J.; Krahtov, L.; Volkmann, T.
2006. S. Ratchev (Ed.), Precision Assembly Technologies for Mini and Micro Products: Proceedings of the IFIP TC5 WG5.5 Third International Precision Assembly Seminar (IPAS’2006), 19-21 February 2006, Bad Hofgastein, Austria. Ed.: S. Ratchev, 201–213, Springer. doi:10.1007/0-387-31277-3_20
Aspects of the simulation of a cutting process with ABAQUS/Explicit including the interaction between the cutting process and the dynamic behaviour of the machine tool
Fleischer, J.; Schermann, T.; Marsolek, J.; Schmidt, C.
2006. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations: May 11–12, 2006, Bled, Slovenia. Ed.: I. Grabec, University of Ljubljana
Entwicklungsbeispiele adaptronischer Komponenten für Werkzeugmaschinen - Ausgleich niederfrequenter Verlagerungen
Munzinger, C.; Knödel, A.; Weis, M.
2006. Adaptronic Congress 2006: 3–4 May 2006, Göttingen
Investigation on the Increase of Accuracy by the Use of Direct Pose Measurement
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2006. Parallel kinematic machines in research and practice: the 5th Chemnitz Parallel Kinematics Seminar, April 25 - 26, 2006; [proceedings] / PKS 2006. Fraunhofer Institut Werkzeugmaschinen und Umformtechnik. Hrsg.: R. Neugebauer, 851–854, Verlag Wissenschaftliche Skripten
Active Hydrostatic Guiding System with Integrated Adaptronic Sensor/Actuator-Unit
Fleischer, J.; Knödel, A.; Munzinger, C.
2006. Customer benefits of fluid power : conference proceedings ; 5th International Fluid Power Conference, Aachen, Germany, [March 20th till 22nd 2006 ; 5. IFK], 115–125, Shaker Verlag
Mass production in µMIM: putting theory to work
Fleischer, J.; Walcher, H.; Maetzig, M.; Dieckmann, A.-M.
2007. Metal Powder Report, (3), 18–20. doi:10.1016/S0026-0657(07)70062-0
Ganzheitliche Optimierung von Werkzeugmaschinen - Methoden, Maßnahmen und Machbarkeit
Broos, A.; Fleischer, J.
2007. Seminar Mechatronik: Vorsprung durch Simulation , Garching, 18. Oktober 2007. Hrsg.: M. Zäh, Art.-Nr. 3–1, Utz
Einsatz und Potential der Mehrkörpersimulation für die Ermittlung von Komponentenbelastungen bei Werkzeugmaschinen
Fleischer, J.; Munzinger, C.; Broos, A.; Schopp, M.; Wieser, J.; Hennrich, H.
2007. V. der Wissenschaften GmbH (Ed.), Tagungsband Dresdner Maschinenelemente Kolloquium – DMK 2007, Dresden, 5. 6.12.2007, Dresden., 425–432, Verlag der Wissenschaften GmbH
OptiSLang & emPlant for Process Simulation
Broos, A.; Peter, K.; Wieser, J.; Magnusdottir, H.; Burg, J.
2007. Weimarer Optimierungs- und Stochastiktage 4.0: Weimar 29.-30. Nov. 2007, Dynardo
Formeinsatzherstellung durch Integration der abtragenden Verfahren Laserablation und Funkenerosion
Fleischer, J.; Haupt, S.; Halvadjiysky, G.
2007. Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen ; 22. und 23. November 2007, Karlsruhe. Hrsg.: O. Kraft, 109–114, Forschungszentrum Karlsruhe (FZKA)
Laser material processing of micro structures by using picosecond lasers
Fleischer, J.; Haupt, S.
2007. Laser assisted net shape engineering 5: Proceedings of the 5th LANE 2007. Ed.: M. Geiger, 1187–1193
Bewertungssystem zum Vergleich und zur Auswahl von Sensoren in der Multisensor-Koordinatenmesstechnik
Fleischer, J.; Peters, J.; Buchholz, I.
2007. Mikrosystemtechnik Kongress 2007, VDE Verlag
Heat Flow Simulation for Dry Machining of Power Train Castings
Fleischer, J.; Pabst, R.; Kelemen, S.
2007. (Elsevier, Ed.) CIRP annals, manufacturing technology, 56 (1), 117–122. doi:10.1016/j.cirp.2007.05.030
Direct Pose Measurement - A Suitable Way to Increase the Accuracy of Parallel Robots?
Munzinger, C.; Kipfmüller, M.
2007. Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information Engineering Conference, The American Society of Mechanical Engineers (ASME)
Life cycle performance for manufactures of production facilities
Rühl, J.; Fleischer, J.
2007. 3rd International Conference on LifeCycle Management: Zurich, University of Zurich at Irchel ; August 27 to 29, 2007
Dimensioning of Multifunctional Piezoelectric Transducers for Machine Tools
Munzinger, C.; Weis, M.; Herder, S.
2007. Adaptronic Congress: 23.–24.05.2007, Göttingen
Modularization and simulation-based optimization of work piece handling in manufacturing cells
Fleischer, J.; Wieser, J.
2007. The Institution of Engineering and Technology International Conference on Agile Manufacturing: (ICAM 2007) ; 9-11 July 2007, Collingwood College, Durham University, Durham, UK / organised by the Institution of Engineering and Technology Manufacturing Enterprise Network, 51–56, Institution of Engineering and Technology (IET). doi:10.1049/cp:20070007
Micro structuring by ultra short pulsed laser ablation
Fleischer, J.; Haupt, S.
2007. Laser metrology and machine performance VIII : 8th International Conference on Laser Metrology, Machine Tool, CMM & Robotic Performance ; Lamdamap 2007, 169–174, European Society for Precision Engineering and Nanotechnology (euspen)
Online ablation control in micro structuring with ultrashort laser pulses
Fleischer, J.; Haupt, S.
2007. Proceedings of the 40th CIRP International Seminar on Manufacturing Systems
Machine life cycle cost estimation via Monte-Carlo simulation
Fleischer, J.; Wawerla, M.; Niggeschmidt, S.
2007. Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 449–453, Springer. doi:10.1007/978-1-84628-935-4_78
Optimizing the Life-Cycle-Performance of Machine Tools by Reliability and Availability Prognosis
Fleischer, J.; Niggeschmidt, S.; Wawerla, M.
2007. Springer (Ed.), Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 329–334, Springer. doi:10.1007/978-1-84628-935-4_57
Prognose der Maschinenzuverlassigkeit unter Berucksichtigung optionaler Ausstattungskomponenten und Serviceleistungen
Fleischer, J.; Niggeschmidt, S.
2007. TTZ 2007 : Entwicklung und Betrieb zuverlässiger Produkte; Tagung Stuttgart, 22. und 23. März 2007 / VDI-Gesellschaft Systementwicklung und Projektgestaltung, 77–90, VDI Verlag
Process Chain for the Manufacturing of Micro Parts and Molds
Fleischer, J.; Schlipf, M.; Deuchert, M.; Dieckmann, A.-M.
2007. 7th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): 20–24 May 2007, Bremen, Germany
Aspects of estimating CMM measurement uncertainty for micro parts with respect to similarity requirements and influences of manufacturing processes
Fleischer, J.; Schlipf, M.; Behrens, I.; Peters, J.
2007. Proceedings of the 7th international conference / European Society for Precision Engineering and Nanotechnology: May 20th - May 24th 2007, Bremen, Germany. Ed.: E. Thornett, 349–352, European Society for Precision Engineering and Nanotechnology (euspen)
A Geometrical Standard for Micro Gears
Fleischer, J.; Behrens, I.; Komori, M.; Okamoto, K.; Kubo, A.; Härtig, F.; Dai, G.
2007. 10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies : March 21st - 23rd, 2007 in Erlangen, Germany ; Proceedings. Ed.: A. Weckenmann, Shaker
Steigerung der Zuverlässigkeit von Werkzeugmaschinen durch den Aufbau eines FMEA-gestützten "Condition Monitoring"-Systems = Increasing the reliability of machine tools by use of an FMEA-based condition monitoring system
Fleischer, J.; Schopp, M.
2007. TTZ 2007: Entwicklung und Betrieb zuverlässiger Produkte; Tagung Stuttgart, 22. und 23. März 2007 / VDI-Gesellschaft Systementwicklung und Projektgestaltung, 55–64, VDI Verlag
Einsatz von Schwingungssignalen zur Zustandsdiagnose und -prognose bei einer Werkzeugmaschine = Use of vibration signals for condition diagnosis and prognosis of machine tools
Fleischer, J.; Schopp, M.
2007. Schwingungsüberwachung und Diagnose von Maschinen: Tagung Würzburg, 27. und 28. Februar 2007 ; VDI-Schwingungstagung 2007, 169–183, VDI Verlag
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematiken. Hrsg.: Uwe Heisel, 97–118, Shaker
Fertigungsbedingte Produkteigenschaften - Fepro
Fleischer, J.; Kotschenreuther, J.; Pabst, R.
2008. Fertigungsbedingte Produkteigenschaften - FePro: Förderkennzeichen 02 PU 1010 ; Status und Perspektiven ; [Voruntersuchung]. Hrsg.: F. Klocke ..., Apprimus-Verl
Potenziale zur Genauigkeitssteigerung durch die direkte Wegmessung bei Parallelkinematiken
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland: Hrsg.: Uwe Heisel, 261–278, Shaker
Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. Manufacturing Systems and Technologies for the New Frontier : The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan. Edited by Mamoru Mitsuishi, Kanji Ueda, Fumihiko Kimura, Springer
Efficient Maintenance of Machine Tools - Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. Manufacturing Systems and Technologies for the New Frontier: the 41st CIRP Conference on Manufacturing Systems, May 26-28, 2008, Tokyo, Japan. Ed.: Mamoru Mitsuishi ..., Springer
Dämpfend fixierte Wendeschneidplatte verbessert die Standzeit beim Fräsen
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, 64–67
Mikroverzahnungsprüfkörper µ-DBA für evolventische Profillinienabweichungen
Fleischer, J.; Buchholz, I.; Härtig, F.; Dai, G.
2008. Technisches Messen, 75 (3), 168–177. doi:10.1524/teme.2008.0797
Integration von Einkauf und Produktion
Fleischer, J.; Weiler, S.
2008. VDI-Z Integrierte Produktion, 74–77
Schneidendämpfung optimiert Standzeit beim Drehen im unterbrochenem Schnitt
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, (5), 38–42
Optimierung und Bewertung kinematischer Konzepte
Munzinger, C.; Broos, A.; Ochs, A.; Schmidt-Ewig, J.-P.
2008. 5th Optimization and Stochastic Days 2008 : November 20-21, 2008, Dorint Hotel, Weimar, Germany : proceedings, 1–17, Dynardo GmbH
Hybrid machine tool based on the combination of laser ablation and electrical discharge machining (EDM)
Schulze, V.; Weber, P.; Haupt, S.
2008. 2nd International Symposium on Laser-Micromachining (ISL 2008), 2. und 13. November 2008, Chemnitz
Steigerung der Verfügbarkeit von Werkzeugmaschinen durch prozessparallele Last- und Verschleißüberwachung
Wagner, M.; Bayha, T.; Schopp, M.
2008. Life-cycle-Performance im Maschinen- und Anlagenbau: [wbk, Institut für Produktionstechnik, Universität Karlsruhe (TH)]. Ed.: Gisela Lanza, 114–132, Shaker
Geometry Optimization of Micro Milling Tools
Fleischer, J.; Deuchert, M.; Kühlewein, C.; Ruhs, C.
2008. S. Dimov & W. Menz (Eds.), 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture ; 9th - 11th September 2008, Cardiff, UK. Ed. by Stefan Dimov and Wolfgang Menz, 275–278, Whittles
Modeling the Heat Flux as an Input Parameter to Simulate Cutting Processes
Schulze, V.; Pabst, R.; Michna, J.
2008. R. W. I. Jarred C. Heigel Schawn P. Moylan (Ed.), Proceedings of the 11th CIRP International Conference on Modeling of Machining Operations Eds.: Jarred C. Heigel, Robert W. Ivester, Schawn P. Moylan, 155–162
Zustandsabhängiger Einsatz von Remote Services - Berücksichtigung der tatsächlichen Belastungen für einen lebenszyklusoptimierten Betrieb
Schopp, M.
2008. 2. Jahrestagung "Globaler Remote Service im Maschinen- und Anlagenbau", 1.-5.6, Köln
Design and manufacturing of micro milling tools
Fleischer, J.; Deuchert, M.; Ruhs, C.; Kühlewein, C.; Halvadjiysky, G.; Schmidt, C.
2008. (Springer, Ed.) Microsystem technologies, 1771–1775
Influence of process parameters on the specific reaction forces and surface characteristics in orthogonal micro-cutting
Fleischer, J.; Schulze, V.; Deuchert, M.; Autenrieth, H.; Löhe, D.; Weber, A.
2008. Conference Proceedings 3rd International Conference on CIRP High Performance Cutting, 675–685, University College Dublin
Simulation of Parallel Kinematics Based on Feedback Control Systems
Munzinger, C.; Kipfmüller, M.; Schmidt-Ewig, J. P.
2008. Conference Proceedings: CIRP ICME 08 - 6th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING Innovative and Cognitive Production Technology and Systems. Ed.: Roberto Teti, University of Naples, Dept. of Materials and Production Engineering; CIRP, the International Academy for Production Engineering
Thermal Micro-Sinter-Joining for Realizing a Shaft to Collar Connection of ŠPIM Bevel Gears
Fleischer, J.; Munzinger, C.; Dieckmann, A.-M.
2008. Conference Proceedings 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN), Delft, 31th May-4th June 2008, 236–239
The automatic feeding of micro parts with flexible oscillating conveyors
Fleischer, J.; Munzinger, C.; Dieckmann, A.-M.; Prause, P.-J.; Bühner, K.; Tröndle, M.
2008. Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008, Volume 2, 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN, Zurich18 - 22 May 2008, 81–85, Euspen
Automated Feeding of Micro Parts into a Measuring Machine
Fleischer, J.; Tröndle, M.; Ruprecht, E.; Dieckmann, A.-M.
2008. Proceedings of the 10th international conference of the European Society for Precision Engineering and Nanotechnology : May 31st - June 4th 2010, Delft, Netherlands. Ed.: H. Spaan ..., 98–101, Yokohama National University
Cost Estimation for Service Contracts through the Monte-Carlo Simulation
Fleischer, J.; Rühl, J.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 547–552, University of New South Wales
Optimization of Maintenance Activities through Maintenance-Relevant Design
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.; Broos, A.
2008. CIRP Design Conference 2008 ; April 7 - 9, 2008, Enschede. Ed.: Fred J. A. M. van Houten, University of Twente
Availability Increase of Machine Tools through Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 388–393, University of New South Wales
Adapting Machining Performance to Load and Wear Levels
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. CIRP (Ed.), LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 372–377, University of New South Wales
Hybrid machining of microstructures using a combination of EDM-milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2008. The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, 14th - 17th July 2007
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: Klaus Weinert, 530–541, Vulkan-Verlag
Lebenszyklusoptimierte Maschinen durch grenzlastnahen Einsatz von Maschinenelementen
Fleischer, J.; Munzinger, C.; Schopp, M.; Hennrich, H.; Broos, A.; Wieser, J.
2008. VDI (Ed.), Automation 2008 : Lösungen für die Zukunft ; Tagung Baden-Baden, 3. und 4. Juni 2008 ; [mit CD-ROM] / Der Automatisierungskongress in Deutschland. VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik. [Tagungsleiter Kurt D. Bettenhausen ...], 101–104, VDI Verlag
Compensation of the size effect due to the cutter radius offset in the micro milling process
Schulze, V.; Deuchert, M.; Ruhs, C.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 437–440, Cardiff University. doi:10.1243/17547164C0012009093
Möglichkeiten der Schneidkantenpräparation bei Wälzschälrädern
Osterried, J.
2009. Verlag Dr. Müller (VDM)
Control of feeding micro parts with vibrating conveyors
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 275–278, Cardiff University. doi:10.1243/17547164C0012009055
In-mold-labeling of metal/ceramic material compounds
Ruprecht, E.
2009. Workshop CarCIM, Fraunhofer Institut für Keramische Technologien und Systeme (IKTS)
Automated sinter-joining of PIM parts
Munzinger, C.; Ruprecht, E.; Klimscha, K.; Dieckmann, A.-M.
2009. Advances in powder metallurgy & particulate materials - 2009 : proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials ... ; June 28 - July 1, Las Vegas, NV ; [PowderMet 2009]. Vol.: 2: Parts 8 - 13. Ed.: T. J. Jesberger, 6/1, Metal Powder Industries Federation
Implementation of on-machine measurements using confocal white-light sensors for micro Electrical Discharge Machining and micro laser ablation
Schulze, V.; Weber, P.; Ruhs, C.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 179–182, Cardiff University
Identifying functional principles of an automated handling of greentapes for an in-mold label injection molding process
Munzinger, C.; Dieckmann, A.-M.; Ruprecht, E.
2009. World Congress on Powder Metallurgy & Particulate Materials : PowderMet 2009, June 28-July 1st, Las Vegas, 4–103
Efficient Simulation of Parallel Kinematic Machine Tools
Kipfmüller, M.; Munzinger, C.
2010. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, 30 August 2009 - 2 September 2009. Bd.: 7: 33rd Mechanisms and Robotics Conference, Parts A and B, 523–530, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2009-86769
OPTILAST - basierte Dienstleistungen für den lebenszyklusoptimierten Betrieb einer Werkzeugmaschine
Forkert, T.; Beth, M.; Wieschollek, M.; Schopp, M.
2009. Verfügbarkeit von Produktionssystemen : Maschinen, Komponenten und Verfügbarkeitsmanagement ; Gemeinsame Abschlussveranstaltung der BMBF-Verbundprojekte zum Themenkreis ; Tagungsband ; 24. - 25. Juni 2009, Fraunhofer Institut f. Werkzeugmaschinen u. Umformtechnik, IWU. Ed.: R. Neugebauer, 203–212
Zustandsüberwachung von Komponenten der Lineartechnik
Roßteuscher, H.; Munzinger, C.; Schopp, M.
2009. Verfügbarkeit von Produktionssystemen : Maschinen, Komponenten und Verfügbarkeitsmanagement ; Gemeinsame Abschlussveranstaltung der BMBF-Verbundprojekte zum Themenkreis ; Tagungsband ; 24. - 25. Juni 2009, Fraunhofer Institut f. Werkzeugmaschinen u. Umformtechnik, IWU. Ed.: R. Neugebauer, 69–84
Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST) : 08/2006 - 07/2009 ; Abschlußbericht
Bayha, T.; Munzinger, C.; Schopp, M.; Broos, A.; Huf, A.; Walther, M. (Eds.)
2009. Apprimus Wissenschaftsverlag
Development and Prototyping of a Microturbine-Generator-Unit for Energy Supply of Distributed Fluidic Microsystems
Munzinger, C.; Tröndle, M.; Herder, S.; Weis, M.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Vol.: 2. Ed.: H. V. Brussel, 550–554, European Society for Precision Engineering and Nanotechnology (euspen)
Dimensioning a Sinter-Joined Shaft to Collar Connection in Sub-Millimeter Range
Munzinger, C.; Tröndle, M.; Klimscha, K.; Dieckmann, A.-M.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Vol. 1. Ed.: H. V. Brussel, 483–486, European Society for Precision Engineering and Nanotechnology (euspen)
Assembly Automation for Micro-Products Coupling a Vibration Conveyor with A Gripper
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Ruprecht, E.
2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Vol.: 2. Ed.: H. Van Brussel, 529–532
Neue Ansätze zur Weichbearbeitung von Innenverzahnungen - Wälzschälen und Trockenräumen
Schulze, V.; Kühlewein, C.; Rilli, R.
2009. P. D.-I. K. Felten (Ed.), 2. Symposium Praxis der Zahnradfertigung, Esslingen, 22.06. – 24.06.2009. Hrsg.: K. Felten, 99–120
Adaptronic hydrostatic guiding system for intelligent level control of machine tool slides
Munzinger, C.; Weis, M.; Herder, S.
2009. Conference proceedings / Adaptronic Congress, 20 - 21 May 2008 in Berlin, 72881, Adaptronic Congress Veranstaltungs GbR
Einsatz einer intelligenten Strebe zur Kompensation geometrischer Maschinenfehler in einer Werkzeugmaschine
Munzinger, C.; Herder, S.; Weis, M.; Broos, A.
2009. Mechatronik-Konferenz, 367–377, VDI Verlag
Modeling Of The Heat Input For The Face-Milling Of EN-GJL-250
Schulze, V.; Michna, J.; Pabst, R.
2009. 12th CIRP Conference on Modelling of Machining Operations Hrsg.: Editoriala, MU Mondragon Unibertsitateko Zerbitzu, 243–248
Optimizing Life Cycle Performance of Machine Components Using Time-Discrete Condition Monitoring and Prognosis
Munzinger, C.; Schopp, M.; Broos, A.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE 2009), Cairo, Egypt, 3 - 6 May 2009, 418–424
Smart adaptronic hydrostatic guiding system for machine tool slides
Munzinger, C.; Herder, S.; Weis, M.
2009. M. Ahmadian (Ed.), Smart Structures/NDE 2009 Proceedings of SPIE - The International Society for Optical Engineerin Hrsg.: Ahmadian, Mehdi, 77–87. doi:10.1117/12.817541
Innovative Lösungen für die zerspanende Bearbeitung im Bereich Powertrain
Fleischer, J.; Kotschenreuther, J.
2009. Begleitband zum Fachgespräch Innovative Zerspanung : Prozess, Simulation, Optimierung ; Dortmund, 10./11. März 2009, 25–32, Technische Universität Dortmund
Intelligent strut to compensate geometrical machine errors in amachine tool
Munzinger, C.; Herder, S.; Weis, M.; Otter, M.
2009. Conference proceedings - Adaptronic Congress, 19 - 20 May 2009 in Berlin, 122–130, ERAS
Extension of cutting force formulae for microcutting
Fleischer, J.; Schulze, V.; Kotschenreuther, J.
2009. CIRP Journal of Manufacturing Science and Technology, 2 (1), 75–80
Process analysis for the production of Beryllium alloys
Ruprecht, E.
2010. BeYOND Industrial Forum II, 1. Oktober 2010, 1–12
Prozessanalyse in der Produktion von Berylliumlegierungen
Ruprecht, E.
2010. BeYOND Industrial Forum II, 1. Oktober 2010, 1–12
Research on the Design of Sinter Joined Connections for Powder Injection Moulded Components
Munzinger, C.; Dieckmann, A.-M.; Klimscha, K.
2010. Proceedings / World Powder Metallurgy Congress & Exhibition, PM2010 : 10th - 14th October 2010, Fortezza da Basso Congress Centre, Florence, Italy. Organised & sponsored by EPMA, 477–484, European Powder Metallurgy Association (EPMA)
Extended measuring range for adaptronic control of quasi-/static forces and travels with piezoelectric transducers
Munzinger, C.; Weis, M.; Herder, S.
2010. ICMC 2010, 913–920, Deutsche Forschungsgemeinschaft (DFG)
Lösungen statt Standardgeschäft - Zur Strategie des Weltmarktführers für Produktionslösungen
Fleischer, J.
2010. welt.de (Ed.), Tagungsband Zukunft Maschinen- & Anlagenbau Hrsg.: welt.de
Fallbeispiele zur Ressourceneffizienz von Werkzeugmaschinen
Fleischer, J.
2010. V. W. Scripten (Ed.), Tangungsband Internationales Kolloquium des Spitzentechnologieclusters eniPROD Hrsg.: Scripten, Verlag Wissenschaftliche. Chemnitz, 24.06.-25.06.2010
Method to couple several miniature oscillating conveyors to a feeding system
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Leberle, U.
2010. Euspen (Ed.), EUSPEN 10th International Conference of the European Society for Precision Engineering & Nanotechnology Hrsg.: Euspen, 103–106
Research on the machining of green feedstock material for sinter joining
Munzinger, C.; Dieckmann, A.-M.; Deuchert, M.; Klimscha, K.; Leberle, U.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, 31st May - 4th June 2010, Delft, Netherlands, 99–102, European Society for Precision Engineering and Nanotechnology (euspen)
Characterisation of a piezoelectric vibratory Conveyor
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Leberle, U.
2010. ACTUATOR 10 International Conference and Exhibition on New Actuators and Drive Systems. WFB Wirtschaftsförderung Bremen, Division Messe Bremen, Bremen und 2010, 613–616
Sensor/Actuator Integration on the Basis of Resonant Effects of Piezoelectric Transducers
Munzinger, C.; Weis, M.; Herder, S.
2010. ACTUATOR 2010, 609–612, Messe Bremen
On-machine measurement for the micro-EDM-milling process using a confocal white-light sensor
Schulze, V.; Ruhs, C.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2010, 31st May - 4th June 2010. Ed.: H. Spaan ..., 37–40, European Society for Precision Engineering and Nanotechnology (euspen)
Nass- und Trockenräumen von 16MnCr5
Meier, H.; Rilli, R.; Schulze, V.
2010. R. Pabst, B. Nestler & V. Schulze (Eds.), 1. Klausurtagung des Graduiertenkollegs 1483, 3. Symposium des CCMSE Hrsg.: Pabst, Rüdiger; Nestler, Britta; Schulze, Volker, 39–43, Shaker Verlag
Precise ablation milling with ultra short pulsed Nd:YAG lasers by optical and acoustical process control
Schulze, V.; Weber, P.
2010. W. Pfleging, Y. Lu, K. Washio, J. Amako & W. Hoving (Eds.), Proceedings of SPIE Vol. 7585 Hrsg.: Wilhelm Pfleging, Kunihiko Washio, Jun Amako, Willem Hoving, Yongfeng Lu, SPIE. doi:10.1117/12.841616
Size Effects in Aluminium Bronze Cast Specimens
Okolo, B.; Rögner, J.; Kerscher, E.; Beck, T.; Schulze, V.; Wanner, A.; Löhe, D.
2010. Smart Systems integration and reliability: honorary volume on the occasion of Herbert Reichl’s 65th birthday, 740–750, Michel, B
Sensor/actuator integration with piezoelectric transducers for static and quasistatic force control
Fleischer, J.; Herder, S.; Dosch, S.
2011. Adaptronic Congress 2011: Aktive Systeme für dynamische Märkte ; 7–8 Eptember 2011, Darmstadt, 160–167
Automated supply of micro parts based on the micro slide conveying principle
Fleischer, J.; Herder, S.; Leberle, U.
2011. Proceedings of 61st CIRP General Assembly Hrsg.: Elsevier, 60 (1), 13–16. doi:10.1016/j.cirp.2011.03.004
Design of a molding process for Be-Alloys capable of series production
Ruprecht, E.; Kräher, C.
2011, May. 3D-Festival BEYOND (2011), Karlsruhe, Germany, May 27–29, 2011
Handling limp green tapes
Ruprecht, E.
2011
Self-Calibrating Doppler Global Velocimeter with Laser Frequency Modulation
Fischer, A.; Sell, F.; Büttner, L.; Czarske, J.
2011. Opto Proceedings, 66–71
3D-FEM Modeling of Gear Skiving to Investigate Kinematics and Chip Formation Mechanisms
Schulze, V.; Kühnewein, C.; Autenrieth, H.
2011. Advanced materials research, 223, 46–55. doi:10.4028/www.scientific.net/AMR.223.46
Integration of a picosecond laser system into a machining centre
Schulze, V.; Chlipala, M.; Pabst, R.
2011. ICALEO 2011: 30th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing, Art.-Nr.: M1205, American Institute of Physics (AIP). doi:10.2351/1.5062190
Optical and acoustical process control in hybrid micromachining using a picosecond pulsed UV-laser and micro EDM-milling
Schulze, V.; Weber, P.; Ruhs, C.
2011. 8th International Conference on Multi-Material Micro Manufacture (4M): 8–10 November 2011, Stuttgart, Germany, 83–86. doi:10.3850/978-981-07-0319-6_198
Acoustical focal positioning for micromachining using a picosecond pulsed UV-Laser
Schulze, V.; Weber, P.
2011. ICALEO 2011: 30th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing, 966. doi:10.2351/1.5062357
Automatisierte Handhabung und Montage von Folien für schichtbasierte Systeme
Ruprecht, E.
2011. Produktionstechnische Herausforderungen der Elektromobilität: Tagungsband zur wbk-Herbsttagung 2011. Hrsg.: J. Fleischer, 57–68, Shaker Verlag
Research Training Group 1483 - Process chains in manufacturing: Interaction, modelling and evaluation of process zones
Schulze, V.; Pabst, R.; Meier, H.
2011. Proceedings / 3rd International Conference on Distortion Engineering 2011 : Bremen, Germany, 14 - 16 September 2011. Ed.: H.-W. Zoch, 421–428, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
Influence of multiple chip formation on surface layer conditions in a simulative broaching study
Schulze, V.; Osterried, J.; Meier, H.
2011. Proceedings / 3rd International Conference on Distortion Engineering 2011 : Bremen, Germany, 14 - 16 September 2011. Ed.: H.-W. Zoch, 481–488, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
Development of an Innovative Tension Test Process for the Investigation of Sinter Joined Connections
Fleischer, J.; Klimscha, K.
2011. Euro PM2011 Proceedings: Powder Injection Moulding. Ed.: European Powder Metallurgy Association (EPMA), 177–182, European Powder Metallurgy Association (EPMA)
Laser focus positioning Using acoustical Emissions while micromachining
Schulze, V.; Weber, P.
2012. International Laser and Coating Symposium (ILaCoS 2012)
Automated laser power control for roughing and finishing in micro laser machining
Schulze, V.; Weber, P.
2012. Proceedings of the 9th International Conference on Multi-Material Micro Manufacture, 9th - 11th October 2012, Vienna, Austria, 43–46
Automatisierte Produktionsprozesse und -anlagen für den hybriden Leichtbau
Fleischer, J.; Schädel, J.; Gebhardt, J.
2012. Faserverbundleichtbau - Methoden, Werkstoffe und Produktion, 35–36, Society for the Advancement of Material and Process Engineering (SAMPE)
Highly integrated hydraulic feed axis
Fleischer, J.; Bauer, J.
2012. 13th International Conference on New Actuators & 7th International Exhibition on Smart Actuators and Drive Systems (Actuator 12). Conference Proceedings. Ed.: H. Borgmann, 734–737, Messe Bremen
FE analysis on the influence of sequential cuts on component conditions for different machining strategies
Schulze, V.; Osterried, J.; Strauß, T.
2011. 1st CIRP Conference on Surface Integrity (CSI), 19, 318–323. doi:10.1016/j.proeng.2011.11.119
Combined 3D Micro Structuring of Ceramic Green TapeUsing Punching, Embossing and Laser Processing
Hagen, G.; Kopp, T.; Ziesche, S.; Partsch, U.; Ruprecht, E.
2012. IMAPS/ACerS 8th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies 2012 (CICMT 2012). Proceedings, IMAPS/ACer8, Curran
Qualitätssicherung in der Mikrofunkenerosion
Matuschka, B.; Ruhs, C.; Schulze, V.
2013. 6. Kolloquium Mikroproduktion : Braunschweig 8. Oktober 2013. Hrsg.: Rainer Tutsch (Hrsg.), A 14, Shaker
Compensating the cutting edge displacement during micro milling - a mechatronic approach
Schulze, V.; Zanger, F.; Deuchert, M.; Hoppen, P.
2013. S. Azcárate & S. Dimov (Eds.), International Conference on Multi-Material Micro Manufacture Hrsg.: Azcárate, Sabino; Dimov, Stefan, 225–228. doi:10.3850/978-981-07-7247-5-418
Hybrider Leichtbau: Herausforderung für die Produktionstechnik
Koch, S.-F.
2013. IHK-Technologie-Akademie Mittelstand, 20.11.2013, Pfinztal, Deutschland, 1–26
Kontinuierliche Fasern zur lokalen Verstärkung und zum automatisierten Fügen
Gebhardt, J.; Schädel, J.
2013. KITe hyLITE Jubiläums - Workshop 5 Jahre innovationscluster, 145–167, Karlsruher Institut für Technologie (KIT)
Produktionstechnische Herausforderungen und Entwicklungen entlang der Prozesskette des Resin Transfer Moulding (RTM)
Thoma, B.; Wagner, H.; Ochs, A.
2013. KITe hyLITE (Ed.), KITe hyLITE Jubiläums - Workshop 5 Jahre innovationscluster Hrsg.: KITe hyLITE, 10–25
New conceptual lightweight design approaches for integrated manufacturing processes - Influence of alternative materials on the process chain of electric motor manufacturing
Peter, M.; Fleischer, J.; Sell-Le Blanc, F.; Jastrzembski, J.-P.
2013. IEEE (Ed.), Electric Drives Production Conference (EDPC), 2013 3rd International Hrsg.: IEEE, 206–211, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689735
Mikrosystemtechnik - Wann kommt der Marktdurchbruch?
Bierhals, R.; Weule, H.; Hüntrup, V.; Schünemann, M.; Thies, U.; Cuhls, K.
2013. Springer Verlag
Prozesskette zur flexiblen Herstellung leichter Aluminium-Tragwerksstrukturen
Otter, M.
2013. Hybrider Leichtbau - Metall trifft Faserverbund, Shaker Verlag
Mobile Arbeitsmaschinen simultan orten und ansteuern
Zwirello, L.; Dosch, S.; Fleischer, J.; Zwick, T.
2013. E&E Kompendium
Intelligenter Greifer zur Handhabung textiler Kohlenstofffaserhalbzeuge
Förster, F.
2014. Faszination Leichtbau : Konzepte, Werkstoffe, Technologien ; Beiträge zum gleichnamigen Symposium vom 19. und 20. Mai 2014, MobileLifeCampus, Wolfsburg / [Symposium Faszination Leichtbau: Konzepte, Werkstoffe, Technologien], 57–79, ITS mobility
Secure Plug and Work - Intelligente Inbetriebnahme von Maschinen und verketteten Anlagen
Dosch, S.
2014. J. Fleischer (Ed.), Life-Cycle-Performance von Produktionssystemen : Tagungsband zur wbk-Herbsttagung. Hrsg.: J. Jürgen Fleischer, 91–105, Shaker Verlag
Influence of clamping systems during milling of carbon fiber reinforced composites
Klotz, S.; Zanger, F.; Schulze, V.
2014. New production technologies in aerospace industry : Machining Innovations Conference ; proceedings ; November 19th and 20th, 2014 in Hannover. Hrsg.: B. Denkena, 248–256, TEWISS - Technik und Wissen
Intrinsische Hybridverbunde für Leichtbautragstrukturen
Fleischer, J.; Koch, S.; Gebhardt, J.; Schwennen, J.; Wagner, H.
2013. Fachtagung "Thermoplastische Faserverbundkunststoffe" : 15. - 16. Mai 2013, Fürth / [FAU, Friedrich-Alexander Universität Erlangen-Nürnberg, LKT, Lehrstuhl für Kunststofftechnik.] Hrsg.: D. Drummer, 199–207, Carl Hanser Verlag
Rotor balancing by optimized magnet positioning during algorithm-controlled assembly process: Selection and assembly of rotor components minimizing the unbalance
Peter, M.; Fleischer, J.
2014. IEEE (Ed.), 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, 444–447, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984432
Fault analysis of linear winding processes for noncircular orthocyclic coils: Investigation of winding scheme dependencies within the winding process development
Sell-Le Blanc, F.; Fleischer, J.; Sautter, S.; Delz, T.; Hagedorn, J.
2014. 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984402
Material Behaviour of Armco-Iron and AISI 4140 at High Speed Deformation during Machining
Zanger, F.; Gerstenmeyer, M.
2014. WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany. Ed.: M. Merklein, 161–166, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.1018.161
Neue Materialien und Hybridbauweise - Leichtbauansätze für elektrische Antriebsmotoren
Peter, M.; Fleischer, J.
2014. Chancen und Herausforderungen der Elektromobilität - zu Lande, zu Wasser und in der Luft : E-MOTIVE : 6. Expertenforum Elektrische Fahrzeugantriebe : 15. und 16. Mai 2014 in Wolfsburg, 38–39, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Hard Broaching of Case Hardened SAE 5120
Meier, H.; Ninomiya, K.; Dornfeld, D.; Schulze, V.
2014. Procedia CIRP, 14, 60–65. doi:10.1016/j.procir.2014.03.074
Characterization of an Eigenfrequency Adaptable Machine Tool Carriage
Koch, S.-F.; Bauer, J.; Wagner, H.; Horsch, J.; Brecht, S.; Fleischer, J.
2014. Procedia CIRP, 14, 412–417. doi:10.1016/j.procir.2014.03.086
Highly Integrated High Precision Fluidic Feed Axis
Bauer, J.; Mack, D.; Fleischer, J.
2014. Procedia CIRP, 14, 339–344. doi:10.1016/j.procir.2014.03.084
How to teach design for manufacturability at micro scale tasks
Schulze, V.; Zanger, F.; Hoppen, P.
2013. Design education - growing our future : proceedings of the 15th International Conference on Engineering and Product Design Education, Dublin, Dublin Institute of Technology, Bolton Street, Dublin, Ireland, 5th-6th September 2013. Ed.: E. Bohemia, 58–63, The Design Society
Surface Quality after Broaching with Variable Cutting Thickness
Zanger, F.; Boev, N.; Schulze, V.
2014. Procedia CIRP, 13, 114–119. doi:10.1016/j.procir.2014.04.020
Influence of Clamping Systems During Drilling Carbon Fiber Reinforced Plastics
Klotz, S.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2014. Procedia CIRP, 13, 208–213. doi:10.1016/j.procir.2014.04.036
Resource-efficient Ball Screw by Adaptive Lubrication
Fleischer, J.; Leberle, U.; Maier, J.; Spohrer, A.
2014. Procedia CIRP, 15, 50–55. doi:10.1016/j.procir.2014.06.049
Characterization of Process-Machine-Interaction for Coil Winding Processes using Multi Body Dynamics
Sell-Le Blanc, F.; Fleischer, J.; Li, L.; Krause, M.
2014. CIRP Conference on Virtual Machining Process Technology
Intelligent gripper technology for the handling of carbon fiber material
Fleischer, J.; Förster, F.; Crispieri, N. V.
2014. Production Engineering, 8 (6), 691–700. doi:10.1007/s11740-014-0549-8
Automatisierung in der Batteriemodulmontage
Haag, M.; Fleischer, J.; Haag, S.
2014. ATZ extra, 19, 80–83. doi:10.1365/s35778-014-1296-3
Spanntechnikvergleich bei der Hochleistungszerspanung
Fleischer, J.; Schulze, V.; Zanger, F.; Leberle, U.; Boev, N.; Spohrer, A.
2014. VDI-Z, 156, 42–44
Feinstanzmodul für die Produktion von Lithium-Ionen-Batteriezellen
Baumeister, M.; Fleischer, J.
2014. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (5), 301–304. doi:10.3139/104.111142
Aktive Kompensation des Schneidkantenversatzes
Hoppen, P.; Zanger, F.; Schulze, V.
2014. Mikroproduktion, 2014, 58–62
Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg
Fleischer, J.; Lanza, G.; Baumann, F.; Krämer, A.; Kopf, R.; Wagner, H.; Schneider, M.; Birenbaum, C.; Stroka, M.; Keckl, C.; Kuppinger, J.; Henning, F.; Wich, Y.; Ardilio, A.; Thielmann, A.; Meister, M.; Sauer, A.; Lerch, C.; Jäger, A.; Zanker, C.
2014. Leichtbau BW
Technologieplanung zur automatisierten Fertigung von Preforms für CFK-Halbzeuge
Fleischer, J.; Wagner, H.
2014. Leichtbau-Technologien Im Automobilbau : Werkstoffe - Fertigung - Konzepte. Hrsg.: W. Siebenpfeiffer, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-04025-3_2
Trennen von faserverstärkten Kunststoffen
Schulze, V.; Klotz, S.
2014. Handbuch Spanen. Hrsg.: U. Heisel, 1241–1251, Carl Hanser Verlag
Leitfaden Industrie 4.0 - Orientierungshilfe zur Einführung in den Mittelstand
Anderl, R.; Picard, A.; Wang, Y.; Fleischer, J.; Dorsch, S.; Klee, B.; Bauer, J.
2015. VDMA Verlag
Leiterbahnen zur Versorgung von Leistungselektronik auf Spritzgegossenen, keramischen Grundkörpern
Matuschka, B.; Schulze, V.; Rohde, M.; Seifert, H.
2015. GMM - VDE/VDI-Gesellschaft Mikroelektronik (Ed.), MikroSystemTechnik Kongress Hrsg.: GMM - VDE/VDI-Gesellschaft Mikroelektronik. 6. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 26. - 28. Oktober 2015, Karlsruhe, 242–245, VDE Verlag
Untersuchung der Einflussfaktoren auf die Umformbarkeitmetallischer Grünfolien
Spiller, Q.; Baumeister, M.; Fleischer, J.
2015. Institut für Kunststoffverarbeitung (IKV) (Ed.), 7. Kolloquium Mikroproduktion Hrsg.: Institut für Kunststoffverarbeitung (IKV), 222–229
Selektive Montage zur Reduktion der Rotorunwucht in PM Motoren
Peter, M.; Fleischer, J.
2015. Wissen, was uns morgen antreibt - Industrie und Forschung im Dialog rund um die elektrische Antriebstechnik : E-MOTIVE : 7. Expertenforum Elektrische Fahrzeugantriebe : 09. und 10. Juni 2015, BMW Driving Academy Maisach bei München, 57, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Bearbeitung metallischer Gläser auf Fe- und Zr-Basis mittels Mikrofräsen, Mikrofunkenerosion und Mikrolaserabtragen
Hoppen, P.; Kacaras, A.; Matuschka, B.; Schulze, V.
2015. 7. Kolloquium Mikroproduktion : 16.-17. November 2015, Aachen. Hrsg.: Ch. Hopmann, RWTH Aachen
Component Distortion due to a Broaching Process
Bejnoud, F.; Zanger, F.; Schulze, V.
2015. Progress in Production Engineering. Hrsg.: Jens P. Wulfsberg, Benny Röhlig and Tobias Montag, 239–246. doi:10.4028/www.scientific.net/AMM.794.239
Compensation of geometric errors using a highly integrated hydraulicfeed axis
Klee, B.; Bauer, J.; Graule, D.; Brenner, D.; Fleischer, J.
2015. T. T. Publications (Ed.), WGP Congress 2015 - Progress in Production Engineering Hrsg.: Publications, Trans Tech. WGP Congress 2015 - progress in production engineering ; selected, peer reviewed papers from the 2015 WGP Congress, September 7 - 8, 2015, Hamburg, Germany, 395–402. doi:10.4028/www.scientific.net/AMM.794.395
Characterization of metal inserts embedded in carbon fiber reinforced plastics
Gebhardt, J.; Pottmeyer, F.; Fleischer, J.; Weidenmann, K.
2015. Edtmaier (Ed.), Proceedings of 20th Symposium on Composites Hrsg.: Edtmaier, 506–513, Scientific.Net. doi:10.4028/www.scientific.net/MSF.825-826.506
Novel Approach for 3D Simulation of a Cutting Process with Adaptive Remeshing Technique
Zanger, F.; Boev, N.; Schulze, V.
2015. (V. Schulze, Ed.) Procedia CIRP, 31, 88–93. doi:10.1016/j.procir.2015.03.022
High Performance Machining Enabled by Adaptive Machine Components
Burtscher, J.; Koch, S.-F.; Bauer, J.; Wagner, H.; Fleischer, J.
2015. Procedia CIRP, 31, 70–75. doi:10.1016/j.procir.2015.03.039
Influence of Kinematic Hardening during Machining of ARMCO Iron
Zanger, F.; Fellmeth, A.; Gerstenmeyer, M.; Schulze, V.
2015. (V. Schulze, Ed.) 15th CIRP Conference on Modelling of Machining Operations (15th CMMO) Hrsg.: Schulze, Volker, 31, 106–111. doi:10.1016/j.procir.2015.03.102
Evaluation of different approaches for modeling phase transformations in machining simulation
Schulze, V.; Uhlmann, E.; Mahnken, R.; Menzel, A.; Biermann, D.; Zabel, A.
2015. Production engineering, 2015, 437–449. doi:10.1007/s11740-015-0618-7
Alternative Herstellung von elektrischen Leitern in der Mikrotechnik
Matuschka, B.; Granser, T.; Rohde, M.; Schulze, V.; Seifert, H.
2015. wt Werkstattstechnik online, 2015, 800–804. doi:10.37544/1436-4980-2015-11-12-40
Materialeffiziente hybride Preforms aus Lang- und Endlosfasern – Faserblasverfahren
Fleischer, J.; Förster, F.; Dackweiler, M.
2015. Lightweight Design, 15 (6), 14–19. doi:10.1007/s35725-015-0048-7
Comparative testing on milling for hydraulic and heat shrinkage tool-holders
Liu, Z.-H.; Zhang, W.; Xu, J.-Z.; Du, S.-J.; Fleischer, J.
2015. Chinese Journal of Construction Machinery, 1, 457–460
Intrinsische Hybridisierung im Schleuderverfahren
Koch, S.-F.; Dackweiler, M.; Pottmeyer, F.; Fleischer, J.
2015. Lightweight Design, 15, 12–19. doi:10.1007/s35725-015-0026-0
Dynamic Characteristics Modeling and Simulation of Ball Screw Feed Drive System Based on Lumped Mass Model
Luo, L.; Zhang, W.; Zhou, M.; Fleischer, J.
2015. Transactions of the Chinese Society for Agricultural Machinery, 1, 370–377. doi:10.6041/j.issn.1000-1298.2015.12.050
Manufacturing of polygon fiber reinforced plastic profiles by rotational molding and intrinsic hybridization
Fleischer, J.; Koch, S.-F.; Coutandin, S.
2015. Prod. Eng. Res. Devel., 15 (3), 317–328. doi:10.1007/s11740-015-0620-0
Geschwindigkeitsmessung bei gerundeten Strangpressprofilen
Fleischer, J.; Schulze, V.; Burtscher, J.; Dosch, S.
2015. VDI-Z Integrierte Produktion, 157 (1), 60–62
The Hybrid RTM Process Chain: Automated Insertion of Load Introducing Elements during Subpreform Assembling
Ballier, F.; Schwennen, J.; Berkmann, J.; Fleischer, J.
2015. B. R. Jens P. Wulfsberg & T. Montag (Eds.), Progress in Production Engineering. Hrsg.: Jens P. Wulfsberg, Benny Röhlig; Montag, Tobias. 8th WGP-Jahreskongress, Aachen, 19.11.2018-20.11.2018, 312–319. doi:10.4028/www.scientific.net/AMM.794.312
Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg
Fleischer, J.; Lanza, G.; Baumann, F.; Krämer, A.; Kopf, R.; Wagner, H.; Schneider, M.; Birenbaum, C.; Stroka, M.; Keckl, C.; Kuppinger, J.; Henning, F.; Thielmann, A.; Lerch, C.; Jäger, A.; Zanker, C.
2015. Leichtbau BW
Adaptive and Adequate Lubrication for Highest Component-lifetimes in Feed Drive Axes with Ball Screws
Fleischer, J.; Spohrer, A.; Leberle, U.; Dosch, S.
2015. Procedia CIRP 29 Hrsg.: ELSEVIER, 29, 335–340. doi:10.1016/j.procir.2015.01.070
Rotational Molding of Fiber Reinforced Plastics with Elastic Composite Core
Fleischer, J.; Koch, S.-F.; Ruhland, P.
2016. D. Dimitrov & T. Oosthuizen (Eds.), International Conference on Competitive Manufacturing : COMA ’16 : 27 January-29 January 2016, Stellenbosch, South Africa : proceedings [Resource Efficiency for Global Competitiveness]. Ed.: D. Dimitrov, 181–186, Stellenbosch University
Efficient implementation of I4.0 with the VDMA toolbox based on use cases
Fleischer, J.; Bauer, J.; Klee, B.; Spohrer, A.
2016. Adaptive and smart manufacturing : Wiener Produktionstechnik Kongress 2016 : WPK 2016, 28.-29.9.2016. Ed.: F. Bleicher, 59–64, New Academic Press
Fiber-Injection-Moulding : Herausforderungen und Chancen
Fleischer, J.; Dackweiler, M.; Ballier, F.
2016. VDI-Z, 16 (10), 64–66
Development of Intelligent Robot Grasping System Based on Machine Vision
Ye, H.; Zhang, W.; Zhang, H.; Fleischer, J.
2016. Modular Machine Tool & Automatic Manufacturing Technique, (12), 1–5
Separation strategies for a feeding system with modular coupled piezoelectric vibration conveyers
Fleischer, J.; Krause, M.
2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology : May 30th-3rd June 2016, Nottingham, UK. Ed.: P. Bointon, 151–153, European Society for Precision Engineering and Nanotechnology (euspen)
Umformtechnik beseitigt Elektromobilitätsprobleme
Peter, M.; Singer, R.; Fleischer, J.
2016. Maschinenmarkt, 20, 39–40
Optimization of Prozess Chain for Continuous-Discontinuous Long Fiber Reinforced Polymer Structures
Pangboonyanon, W.; Zaiß, M.; Fleischer, J.; Lanza, G.
2016. Proceedings of the 17th European Conference on Composite Materials : ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany, MAI Carbon Cluster Management
Spanende Bearbeitung von Kunststoffen mit kombinierter Lang- und Endlosfaserverstärkung
Helfrich, A.; Klotz, S.; Schulze, V.
2016. Maschinen, Anlagen, Verfahren, 16, 86–88
Development of ball screw analysis software using MATLAB Simulink
Leitold, L.; Spohrer, A.; Weinmann, H. W.; Fleischer, J.
2016. GAMAX Proceedings, 1
Influence of a high speed broaching and case-hardening process on the resulting component geometry
Bejnoud, F.; Zanger, F.; Schulze, V.
2016. 13th International Conference on High Speed Machining : Progress in High Speed Machining Technology, October 4-5, 2016, Metz, France., 6
Simulation based reduction of the impact load occurring in the moment of cutting edge entrance in order to prolong tool-life
Matuschka, B.; Boev, N.; Zanger, F.; Schulze, V.
2016. WGP Congress 2016 : Selected, peer reviewed papers from the 2016 WGP Congress, September 5-6, 2016, Hamburg, Germany. Ed.: J. P. Wulfsberg, 173–180, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.1140.173
Joining Parameters and Handling System for Automated Subpreform Assembly
Fleischer, J.; Ballier, F.; Dietrich, M.
2016. Robotics and Automated Production Lines : Selected, peer reviewed papers from the 1st MHI Colloquium, February 24-25, 2016, Hamburg, Germany. Ed.: T. Schüppstuhl, 66–73, Trans Tech Publications. doi:10.4028/www.scientific.net/AMM.840.66
Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies
Wang, Z.; Riemer, M.; Koch, S.-F.; Barfuss, D.; Grützner, R.; Augenthaler, F.; Schwennen, J.
2016. Advanced materials research, 1140, 247–254. doi:10.4028/www.scientific.net/AMR.1140.247
Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches
Koch, S.-F.; Barfuss, D.; Bobbert, M.; Groß, L.; Grützner, R.; Riemer, M.; Stefaniak, D.; Wang, Z.
2016. (J. P. Wulfsberg, M. Fette, T. Montag & T. T. Publications, Eds.) Advanced materials research, 1140, 239–246. doi:10.4028/www.scientific.net/AMR.1140.239
Effects of Different Levels of Abstraction Simulating Heat Sources in FEM Considering Drilling
Bollig, P.; Köhler, D.; Zanger, F.; Schulze, V.
2016. Procedia CIRP, 46, 115–118. doi:10.1016/j.procir.2016.03.186
Analyse der MMS-Zerspanung zur Aerosolbeurteilung
Bollig, P.; Wengle, D.; Schulze, V.; Zanger, F.
2016. Maschinenmarkt, 122, 32–35
Servopneumatic Clamping System for the Assembly of Battery Cells in the Area of Electromobility
Gauchel, W.; Haag, S.
2016. 10th International Fluid Power Conference (10. IFK) : March 8-10, 2016 in Dresden. Bd.: 3, 137–148, Technische Universität Dresden (TU Dresden)
Toolbox Industrie 4.0 für kleine und mittelständische Unternehmen
Bauer, J.; Klee, B.; Fleischer, J.
2016. "KMU 4.0" - intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen : Fertigungstechnisches Kolloquium Magdeburg. Hrsg.: H.-Ch. Möhring, 3, Otto-von-Guericke-Universität Magdeburg
Surface Engineering :Optimierte Oberflächen durch Zerspanungsprozesse
Schulze, V.; Bollig, P.; Gerstenmeyer, M.; Segebade, E.; Zanger, F.
2016. mav Innovationsforum 2016, 1, 6
Lebensdauererhöhung von Kugelgewindetrieben durch Adaptive Schmierung
Spohrer, A.; Fleischer, J.
2016. GETLUB : Tribologie- und Schmierstoffkongress : 9. und 10. März 2016 in Würzburg / FVA, 406–415, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Development of a calculation model for load introduction elements integrated during frp sandwich structure manufacturing
Schwennen, J.; Kupzik, D.; Fleischer, J.
2017. K. Blohkowiak (Ed.), SAMPE Seattle 2017 : conference: May 22-25, 2017, exhibition: May 23-24, 2017, Washington State Convention Center, Seattle, Washington. Hrsg.: Kay Blohkowiak, 969–983, Society for the Advancement of Material and Process Engineering (SAMPE)
Evolutionary Optimization of the Failure Behavior of Load Introduction Elements Integrated During FRP Sandwich Structure Manufacturing
Schwennen, J.; Kalbhenn, L.; Klipfel, J.; Pfeifle, J.; Kupzik, D.; Fleischer, J.
2018. Procedia CIRP Hrsg.: Roberto Teti, Doriana M. D’Addona, 67, 410–415. doi:10.1016/j.procir.2017.12.234
Simulative Investigations on Different Friction Coefficient Models
Zanger, F.; Bollig, P.; Schulze, V.
2017. (Elsevier, Ed.) Procedia CIRP, 58, 140–145. doi:10.1016/j.procir.2017.03.203
Experimentelle Untersuchung des ARBURG Kunststoff-Freiformens zur Herstellung metallischer Bauteile
Spiller, Q.; Fleischer, J.
2017. Deutsche Gesellschaft für Materialkunde (Ed.), WW WerkstoffWoche : 27.-29.09.2017, Dresden, 10–14, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Erweiterung des ARBURG Kunststoff-Freiformens zur Herstellung metallischer Bauteile
Spiller, Q.; Fleischer, J.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 55–61, Verlag BIAS
Mechanical surface modification using cutting inserts
Segebade, E.; Klose, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. I. S. C. for Shot Peening (Ed.), ICSP13 : 13th International Conference on Shot Peening : 18-21 September 2017, Montréal, Canada / organizing institution: Polytechnique Montréal: Proceedings, 219–224, [Verlag nicht ermittelbar]
Modular production plant for hybrid high performance components
Joppich, T.; Kilian, S.; Moll, P.; Schäfer, M.
2017. Composites Germany - Carbon Composites e. V. (Ed.), ICC - Lightweight Technologies Forum, 18.9.-19.9.2017, Stuttgart. Hrsg.: Composites Germany - Carbon Composites e. V
Process Analysis and Development of a Module for Implementing Continuous Fibres in an Additive Manufacturing Process
Baumann, F.; Sielaff, L.; Fleischer, J.
2017. SAMPE Europe Symposium 2017, 14.-16.11.2017, Stuttgart, 1–8
Automated local reinforcing of glass fiber-injection molded preforms with carbon fiber tapes
Dackweiler, M.; Fleischer, J.
2017. 15th Japan International SAMPE Symposium and Exhibition, 27th-29th November 2017, Tokyo
Optimierung der Aktivlotzusammensetzung für Al2O3 und Herstellung von innenliegenden Leiterbahnen
Götze, E.; Heinzel, Y.; Matuschka, B.; Zanger, F.; Schulze, V.; Rohde, M.; Krügelstein, A.; Franke, J.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 129–134, Verlag BIAS
Dynamische Parameteranpassung bei der Mikrozerspanung von 20MnCr5
Gabsch, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 149–154, Verlag BIAS
Finish machining of laser beam melted parts
Götze, E.; Zanger, F.; Schulze, V.
2017. Proceedings of the Special Interest Group Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing : October 10-11, 2017, Leuven, BE. Ed.: W. Dewulf, 99–103, European Society for Precision Engineering and Nanotechnology (euspen)
Alternativer Herstellprozess von Batteriegehäusen
Singer, R.; Fleischer, J.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 112 (9), 580–583. doi:10.3139/104.111777
Simulative Betrachtung von Prozessketten in der Fertigung
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. massivUmformung, 2017, 56–59
Ressourceneffizienter Kugelgewindetrieb durch adaptive Schmierung
Spohrer, A.; Leitold, L.; Straub, F.; Hillenbrand, J.; Fleischer, J.
2017. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 58. Tribologie-Fachtagung, 25. September bis 27. September 2017 in Göttingen, 39–49, Gesellschaft für Tribologie e.V. (GfT)
Entwicklung eines serienflexiblen Wickelverfahrens
Peter, M.; Halwas, M.; Schigal, W.; Fleischer, J.
2017. Forschungsvereinigung Antriebstechnik e.V. (FVA) (Ed.), Industrie und Forschung im Zukunftsdialog : E-MOTIVE : 9. Expertenforum Elektrische Fahrzeugantriebe : 5. und 6. September 2017 in Hannover / FVA, FVV, VDMA ; Tagungsleitung: Alexander Raßmann, 91–94, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Variantenanalyse zur Effizienzsteigerung beim Wirbeln mit synchronem Drehen
Klotz, S.; Klose, J.; Sellmeier, V.; Schulze, V.
2017. B. Denkena (Ed.), PIA - Prozessketten im Automobilbau. Hrsg.: Berend Denkena, 121–129
Comparison of Modeling Methods to Determine Cutting Tool Profile for Conventional and Synchronized Whirling
Zanger, F.; Sellmeier, V.; Klose, J.; Bartkowiak, M.; Schulze, V.
2017. Procedia CIRP, 58, 222–227. doi:10.1016/j.procir.2017.03.216
Drahtschwingungen beim Linearspulenwickeln
Hofmann, J.; Flohr, L.; Kistner, J.; Fleischer, J.
2017. Draht, 2, 1
Bessere Schneidkanten durch optische 3D-Messtechnik
Schulz, V.; Klotz, S.; Rees, E.
2017. Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnolgie, 2019. Hrsg.: Bahman Azarhoushang, Hochschule Furtwangen
Randschichtzustände nach Fertigungsprozessen ? Erzeugung und Bewertung
Schulze, V.; Zanger, F.; Bollig, P.; Segebade, E.; Gerstenmeyer, M.; Klotz, S.
2017. Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnolgie, 2019. Hrsg.: Bahman Azarhoushang, Hochschule Furtwangen
Vorrichtungsfreies Fügen in smarten Rohbauzellen
Kupzik, D.
2017. Handling, 6, 36–37
Effiziente Herstellung hybrider Bauteile durch rekonfigurierbare Fertigungsanlagen
Schäfer, M.; Moll, P.
2017. L. L. Baden-Württemberg (Ed.), 4. Technologietag Hybrider Leichtbau, 30. Mai 2017, Stuttgart
Highly Integrated Self-compensating Hydraulic Feed Axis for Small Machine Tools
Bauer, J.; Klee, B.; Fleischer, J.
2017. Small machine tools for small workpieces : final report of the DFG priority program 1476. Ed.: Jens Peter Wulfsberg, Adam Sanders, editors, 103–116, Springer
Zerspanungssimulation mit Simufact Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth & H. Schafstall (Eds.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Congresszentrum Marburg. Hrsg.: Michael Wohlmuth, Hendrik Schafstall, 116–127, Simufact Engineering GmbH
Simulation der mechanischen Oberflächenbehandlung mit Simufact Forming
Gerstenmeyer, M.; Segebade, E.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth (Ed.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Marburg. Hrsg.: Hendrik Schafstall, 180–189, Simufact Engineering GmbH
Prüfmethoden für Tiefziehfehler
Singer, R.; Menken, L.; Weber, M.; Fleischer, J.
2017. Umformtechnik, 4, 16–17
Vernetzte Anlagen für die spanende Fertigung
Fleischer, J.; Gaub, H.; Lang, H.; Klaiber, M.; Schöning, S.; Rothaupt, B.
2017. Handbuch Industrie 4.0 – Geschäftsmodelle, Prozesse, Technik. Verfass. eines Vorworts: Gunther Reinhart, 585–604, Carl Hanser Verlag. doi:10.3139/9783446449893.020
Signifikant Leistungsfähiger - synchroner Drehwirbel-Prozess
Klotz, S.; Zanger, F.; Sellmeier, V.; Schulze, V.
2017. Werkstatt und Betrieb, 2016, 62–65
Metallographische Untersuchung von Randschichten bei der Zerspanung
Ohl, A.; Kümmel, J.; Poser, K.; Schulze, V.; Wanner, A.
2017. Fortschritte in der Metallographie : Vortragstexte der 51. Metallographie-Tagung, 13.-15. September 2017 in Aalen. Mitwirkender: Timo Bernthaler, 319–324, Inventum GmbH
Asymmetrische Schneidkantenmikrogeometrien - Bedeutung, Charakterisierung, potenzielle Anwendungen und Herausforderungen
Segebade, E.; Zanger, F.; Schulze, V.
2017. Spanende Fertigung. Hrsg.: Dirk Biermann, 79–86, Vulkan-Verlag
Plastic Deformation: Constitutive Description
Schulze, V.; Vöhringer, O.; Halle, T.
2017. Reference module in materials science and materials engineering. Ed.: Saleem Hashmi, 1–17, Elsevier. doi:10.1016/B978-0-12-803581-8.02883-6
Produktion alternativer Pouchzellengehäuse
Singer, R.; Bakozahos, A.; Fleischer, J.
2017. M. Krausa (Ed.), Batterieforum Deutschland - Posterabstracts und Projektvorstellungen. Hrsg.: M. Krausa, 120, Kompetenznetzwerk Lithium-Ionen-Batterien (KLiB)
Quo Vadis Wickeltechnik?
Fleischer, J.; Haag, S.; Hofmann, J.
2017. wbk Institut für Produktionstechnik. doi:10.5445/IR/1000147078
Influence of rotational speed on surface states after stream finishing
Kacaras, A.; Gibmeier, J.; Zanger, F.; Schulze, V.
2018. (P. CIRP, Ed.) 4th CIRP Conference on Surface Integrity Hrsg.: CIRP, Procedia, 71, 221–226. doi:10.1016/j.procir.2018.05.067
Prozesskettensimulation: Additive Fertigung und spanende Nachbearbeitung
Gerstenmeyer, M.; Segebade, E.; Fedder, G.; Zanger, F.; Schulze, V.
2018. 19. RoundTable Simulating Manufacturing : Tagungsband : 16.-17. Mai 2018, Congresszentrum Marburg / Simufact. Hrsg.: H. Schafstall, 32–45, Simufact Engineering
Structure optimisation of metallic load introduction elements embedded in CFRP
Gebhardt, J.; Schwennen, J.; Lorenz, F.; Fleischer, J.
2018. Production Engineering, 12 (2), 131–140. doi:10.1007/s11740-018-0820-5
Intelligente Vorschubachsen mit Industrie 4.0-Funktionalität
Burtscher, J.; Spohrer, A.; Barton, D.; Fleischer, J.
2018. VDI-Z Integrierte Produktion, 160 (4), 42–44
Modeling of Face Milling
Schulze, V.
2014. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 888–894, Springer. doi:10.1007/978-3-642-20617-7_16676
Broaching
Schulze, V.
2014. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 109–118, Springer. doi:10.1007/978-3-642-20617-7_6686
Peening
Schulze, V.; Bouzakis, K.-D.; Klumpp, A.; Gerstenmeyer, M.
2018. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 1–4, Springer Verlag. doi:10.1007/978-3-642-35950-7_16856-1
Demontagegerechtes Batteriemodul
Singer, R.; Fleischer, J.
2018. ATZ - Automobiltechnische Zeitschrift, 120 (1), 100–103. doi:10.1007/s35148-017-0167-9
3D-Print-Cloud Baden-Württemberg : Eine offene Plattform für die Prozesskette der Additiven Fertigung
Merz, S.; Maier, W.; Baumann, F.; Spiller, Q.; Möhring, H.-C.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7-8), 537–542
3D-Print-Cloud BW - Eine offene Plattform für die gesamte Prozesskette der Additiven Fertigung
Merz, S.; Baumann, F.; Dittus, J.
2018. Additive Manufacturing : vom Fertigungsverfahren zum Produktionssystem : Tagungsband zur wbk-Herbsttagung 2018. Hrsg.: J. Fleischer; G. Lanza; V. Schulze, 108–125, Shaker Verlag
Digitalisierung bei der Produktion von Solar- und Batteriezellen
Preu, R.; Rein, S.; Zimmer, M.; Weinmann, H. W.; Hofmann, J.; Fleischer, J.
2018. Die Energiewende – smart und digital : Beiträge zur FVEE-Jahrestagung 2018. Hrsg.: FVEE ForschungsVerbund Erneuerbare Energien
In-Process Analysis of Minimum Quantity Lubrication during Drilling of AISI 4140
Stampfer, B.; Zanger, F.; Schulze, V.
2019. R. Schmitt & G. Schuh (Eds.), Advances in production research : proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018. Eds.: Robert Schmitt, Günther Schuh, 541–550, Springer International Publishing. doi:10.1007/978-3-030-03451-1_53
Systematic Development of a Dismantable Batter Module
Singer, R.; Broschwitz, F.; Fleischer, J.
2018. e-motive Expertenforum. Hrsg.: FVA, 50–57, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Vorrichtungsfreies Fügen : Variantenflexibler Karosserierohbau in smarter Werkstattfertigung
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (10), 703–707. doi:10.37544/1436-4980-2018-10-67
The Smart Battery Maker – a concept for automated flexible and agile production of cells
Storz, T.; Altvater, A.; Hofmann, J.; Scharfer, P.; Fleischer, J.; Schabel, W.
2018, November. International Battery Production Conference (IBPC 2018), Brunswick, Germany, November 14–16, 2018
Function validation of an alternative and format flexible pouch cell packaging
Singer, R.; Weinmann, H. W.; Fleischer, J.; Smith, A.; Wiegand, O.
2018, November. International Battery Production Conference (IBPC 2018), Brunswick, Germany, November 14–16, 2018
Highly integrated machine module for single sheet stacking
Weinmann, H. W.; Fleischer, J.
2018. Tagungsband zur International Battery Production Conference (IBPC) 2018. Hrsg.: A. Kwade, 58
Challenges in conveying electrodes and new approaches to quality assurance
Bold, B.; Weinmann, H. W.; Fleischer, J.
2018. B. L. B. Prof. Arno Kwade Technische Universität Braunschweig (Ed.), Tagungsband zur International Battery Production Conference 2018 Hrsg.: Prof. Arno Kwade, Battery LabFactory Braunschweig, Technische Universität Braunschweig, 56–57
Aufbau einer modularen Produktionsanlage für hybride Faserverbundbauteile
Moll, P.; Schäfer, M.; Coutandin, S.; Fleischer, J.
2018. VDI-Z Integrierte Produktion, 11 (11), 55–58
Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter
Ballier, F.; Dmytruk, T.; Fleischer, J.
2018. T. Schüppstuhl, K. Tracht & J. Franke (Eds.), Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Hrsg.: Thorsten Schüppstuhl, Kirsten Tracht, Jörg Franke, Springer Verlag. doi:10.1007/978-3-662-56714-2
Automatisch zum richtigen System
Fleischer, J.; Coutandin, S. C.; Ballier, F.
2018, August 10
Additive Fertigung von endlosfaserverstärkten Kunststoffen - Eine Parameterstudie
Baumann, F.; Müller, M.; Coutandin, S.; Fleischer, J.
2018. L. B. GmbH (Ed.), Technologietag Hybrider Leichtbau, 1–2, Leichtbau BW
Vorrichtungsfreies Fügen : Variantenflexibler Karosserierohbau in smarter Werkstattfertigung
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. VDI-Z, 160 (10), 21–24
Zustandsüberwachung bei Kugelgewindetrieben : Integration von DMS-Sensorik in Kugelgewindetriebemuttern
Hillenbrand, J.; Spohrer, A.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7-8), 493–498
Kalandrieren von Elektroden für Li-Ionen-Batterien – Wechselwirkungen zwischen Anlagen- und Materialparametern
Bold, B.; Fleischer, J.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (9), 571–575. doi:10.3139/104.111968
Entwicklung des vorrichtungsfreien Fügens zur Flexibilisierung des Karosserierohbaus
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. Neue Robotertechnologien in Produktion, Montage und Service. Hrsg.: J. Franke, 120–133
Surface Layer States after Manufacturing Processes - Generation and Evaluation
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2018. Efficiency, Flexibility, Integration : Wiener Produktionstechnik Kongress 2018. Hrsg.: F. Bleicher, 113–118, New Academic Press
Fügewickeln - flexible Herstellung von Leichtbauverbindungen mit Hohlprofilen
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2018. VDI-Z, 160, 70–72
Influence of punch sequence and prediction of wrinkling in textile forming with a multi-punch tool
Coutandin, S.; Brandt, D.; Heinemann, P.; Ruhland, P.; Fleischer, J.
2018. Production Engineering, 12 (6), 779–788. doi:10.1007/s11740-018-0845-9
Modular production plants for hybrid lightweight components
Schäfer, M.; Moll, P.; Fleischer, J.
2018. 22nd Dresden International Lightweight Engineering Symposium. Hrsg.: Institut für Leichtbau und Kunststofftechnik, Technische Universität Dresden, 141–145
Development and evaluation of concepts for the removal of backing foils from prepreg for the automated production of UD reinforced SMC parts
Kupzik, D.; Ballier, F.; Lang, J.; Coutandin, S.; Fleischer, J.
2018. 18th European Conference on Composite Materials (ECCM-18) : Athens, Greece, 25-28 June 2018 /, Red Hook
Finite element optimisation for rotational moulding with a core to manufacture intrinsic hybrid FRP metal pipes
Nieschlag, J.; Ruhland, P.; Daubner, S.; Koch, S.-F.; Fleischer, J.
2018. Production Engineering, 12 (2), 239–247. doi:10.1007/s11740-017-0788-6
Die additive Fertigung als vollständige Prozesskette auf der Online Plattform 3D-Print-Cloud Baden-Württemberg
Möhring, H.-C.; Fleischer, J.; Maier, W.; Spiller, Q.; Baumann, F.; Merz, S.
2018. Fachtagung Werkstoffe und Additive Fertigung : 25.-26.04.2018, Potsdam : Tagungsband. Hrsg.: P. Hoyer, 84–89, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Influence of Wire Tolerances on Hairpin Shaping Processes
Wirth, F.; Fleischer, J.
2019. 9th International Electric Drives Production Conference (E|DPC) : 3rd and 4th December 2019, Esslingen, Germany : proceedings, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011999
Concept for the Configuration of Turnkey Production Systems
Gönnheimer, P.; Kimmig, A.; Ehrmann, C.; Schlechtendahl, J.; Güth, J.; Fleischer, J.
2019. (F. Dietrich & N. Krenkel, Eds.) Procedia CIRP Hrsg.: Dietrich, Franz; Krenkel, Nicole, 86, 234–238. doi:10.1016/j.procir.2020.01.047
Mechanical characterisation of the shear, bending and friction behaviour of bindered woven fabrics during the forming process
Coutandin, S.; Wurba, A.; Luft, A.; Schmidt, F.; Dackweiler, M.; Fleischer, J.
2019. Materials Science and Engineering Technology, 50 (12), 1573–1587. doi:10.1002/mawe.201900074
Influences of Increasind Coating Thicknesses and Calendering Degrees on Single-Sheet-Stack Formation
Weinmann, H. W.; Fleischer, J.
2019. T. U. Braunschweig (Ed.), IBPC 2019 : International Battery Production Conference : 4th - 6th November 2019 : conference brochure, 49 -, Technische Universität Braunschweig
Continuous-Discontinuous Fiber-Reinforced Polymers
Helfrich, A.; Zanger, F.; Schulze, V.
2019. Continuous–discontinuous fiber-reinforced polymers : an integrated engineering approach. Ed.: Thomas Böhlke, 61–76, Carl Hanser Verlag
Automated Integrated Handling and Preforming
Kupzik, D.; Ballier, F.; Fleischer, J.
2019. Continuous–Discontinuous Fiber-Reinforced Polymers : An Integrated Engineering Approach. Ed.: T. Böhlke, 25–45, Carl Hanser Verlag
CAD/CAM-Schnittstelle für die Wickeltechnik : Systematische Entwicklung und Validierung zur beschleunigten Inbetriebnahme
Hofmann, J.; Bolender, M.; Sun, P.; Fleischer, J.; Sell-Le Blanc, F.; Köhn, H.
2019. wt Werkstattstechnik online, 109 (7/8), 611–616. doi:10.37544/1436-4980-2019-07-08-101
Transformationshub Elektromobilität in Baden-Württemberg
Hofmann, J.; Halwas, M.; Weinmann, H.; Wößner, W.; Schäfer, J.; Hausmann, L.; Wirth, F.; Storz, T.; Schild, L.
2019. Auf dem Weg zur Elektromobilität – Wettbewerbsfaktor Produktionstechnik : Tagungsband zur wbk-Herbsttagung 2019. Hrsg.: J. Fleischer, 57 – 73, Shaker Verlag
Advances in electric drive production for e-mobility via the integration of digital assurance processes
Hofmann, J.
2019. H. Group (Ed.), CWIEME: 21. – 23.05.2019 Messe Berlin
Prozessmodellierung des Faserwickelns als Fügeverfahren
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2019. H. Messe (Ed.), Hannover Messe 2019, 01.04. - 05.04.2019 Hannover, 1–17, Deutsche Messe AG
Rotational Molding for the Production of Hybrid FRP Metal Tension and Compression Rods with Form Fit – Schleuderverfahren zur Herstellung von hybriden FKV Metall Zug-Druck-Stangen mit Formschluss
Nieschlag, J.; Ruhland, P.; Coutandin, S.; Fleischer, J.
2019. Springer (Ed.), Production at the leading edge of technology – Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Ed.: J. Wulfsberg, 131–138, Springer Verlag. doi:10.1007/978-3-662-60417-5_13
Konfiguration von Robotiklösungen
Dackweiler, M.; Krause, M.; Coutandin, S.; Klee, B.; Fleischer, J.
2019. VDI-Z, 8, 62–65
Optimization of the stream finishing process for mechanical surfacetreatment by numerical and experimental process analysis
Neuenfeldt, P.; Kacaras, A.; Zanger, F.; Schulze, V.
2019. K. wbk Institute of Production Science (Ed.), Symposium Mechanical Surface Treatment 2019 : 8th Workshop Machine Hammer Peening : 22th - 23rd October 2019, Karlsruhe. Hrsg.: Volker Schulze, 138–149, wbk Institut für Produktionstechnik
A new concept for agile production of battery cells
Storz, T.; Fleischer, J.
2019. AABC (Ed.), Battery Engineering Symposium 2019 : held at AABC Europe 2019 : Strasbourg, France, 27th-31st January 2019, 184–194, Curran
Agile battery production – a novel concept for the manufacturing of battery cells flexible in format and material
Storz, T.; Fleischer, J.
2019. IBPC (Ed.), IBPC 2019 : International Battery Production Conference : 4th - 6th November 2019 : conference brochure, Technische Universität Braunschweig
Auto-configuration of a digital twin for machine tools by intelligent crawling
Gönnheimer, P.; Hillenbrand, J.; Betz-Mors, T.; Bischof, P.; Mohr, L.; Fleischer, J.
2019. J. P. Wulfsberg, W. Hintze & B.-A. Behrens (Eds.), Production at the leading edge of technology: proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Hrsg.: Jens P. Wulfsberg,, Wolfgang Hintze, Bernd-Arno Behrens, 543–552, Springer
Surface Engineering: Ressourceneffizienz für die Fertigung von Morgen
Schulze, V.; Gerstenmeyer, M.; Segebade, E.; Langer, J.
2019. wbk Institut für Produktionstechnik
Gear skiving of external gears with internally geared tools
Klose, J.; Zanger, F.; Schulze, V.
2019. International Conference on Gears 2019. 3rd International Conference on High Performance Plastic Gears 2019. 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18 – 20, 2019. Hrsg.: VDI Wissensforum GmbH, 1579–1590, VDI Verlag
Analysis of process forces and surface topography when manufacturing case-hardened gears by double flanked hard skiving
Zapf, M.; Klose, J.; Zanger, F.; Schulze, V.
2019. International Conference on Gears 2019. 3rd International Conference on High Performance Plastic Gears 2019. 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18 – 20, 2019. Hrsg.: VDI Wissensforum GmbH, 1647–1658, VDI Verlag. doi:10.51202/9783181023556-1647
Analyses of technical and true overlap in hammer peening operations
Segebade, E.; Hilligardt, A.; Volker, S.
2019. D. Trauth & R. Mannens (Eds.), Symposium Mechanical Surface Treatment 2019 : 8th Workshop Machine Hammer Peening : 22nd and23rd October 2019, Karlsruhe. Hrsg.: Volker Schulze, 76–84, wbk Institut für Produktionstechnik
Camera Based Ball Screw Spindle Defect Classification System
Schlagenhauf, T.; Feuring, C.-P.; Hillenbrand, J.; Fleischer, J.
2019. Springer (Ed.), Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Eds.: Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, 503–512, Springer
Intelligente Störungserkennung einer Werkzeugmaschine – Basierend auf Methoden des Maschinellen Lernens
Netzer, M.; Michelberger, J.; Fleischer, J.
2019. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (10), 635–638. doi:10.3139/104.112158
Herstellung punktschweißbarer CFK-Metall-Bauteile im RTM-Prozess
Roth, S.; Warnck, M.; Coutandin, S.; Fleischer, J.
2019. Lightweight Design, 12 (5), 18–23. doi:10.1007/s35725-019-0047-1
Werkzeugloses Umformen lastangepasster UD-Verstärkungen
Kupzik, D.; Coutandin, S.; Fleischer, J.
2019. lightweight design, 12, 38–43. doi:10.1007/s35725-019-0036-4
Auf dem Weg zur Elektromobilität ? Wettbewerbsfaktor Produktionstechnik
Schulze, V.; Fleischer, J.; Lanza, G. (Eds.)
2019. Shaker Verlag. doi:10.2370/9783844069532
Integration von Machine Vision in Kugelgewindespindeln
Schlagenhauf, T.; Hillenbrand, J.; Klee, B.; Fleischer, J.
2019. wt Werkstattstechnik online, 109 (7/8), 605–610. doi:10.37544/1436-4980-2019-07-08-95
Simulative and Experimental Investigation of Gear Skiving with Reduced Axis Crossing Angles
Vargas, B.; Klose, J.; Zanger, F.; Schulze, V.
2019. Forschungsvereinigung Antriebstechnik e.V. (FVA) (Ed.), 7th International Conference on Gear and Drivetrain Production, GETPRO, 19th – 20th March, 2019, Würzburg, 235–244
Optimierte Fertigung elektrischer Traktionsmotoren durch Technologien der Industrie 4.0
Wirth, F.; Hausmann, L.; Halwas, M.; Hofmann, J.; Mayer, D.; Wößner, W.; Fleischer, J.
2019. Future Mobility : automatisiert - vernetzt - elektrisch. Hrsg.: Technische Akademie Esslingen e.V., 15, Technische Akademie Esslingen (TAE)
Load-bearing FVK metal hybrid structure for automotive cresh applications - simulation, production, performance
Muth, M.; Bernath, A.; Seuffert, J.; Roth, S.; Coutandin, S.; Fleischer, J.; Henning, F.; Weidenmann, K. A.
2019. T. U. D. Institut für Leichtbau und Kunststofftechnik (Ed.), Aufbruch zu digitalen Horizonten : 23. Internationales Dresdner Leichtbausymposium : 27. bis 28. Juni 2019, Technische Universität Dresden (TU Dresden)
Intelligent, konnektiv, sensitiv
Friedmann, M.; Nguyen Duc, H.; Coutandin, S.; Fleischer, J.; May, M.
2019. Handling, 6, 14–15
New Production Technologies - Material- and Process Characterization of Fibre-Metal-Elastomer Laminate Components with high forming degrees
Roth, S.; Coutandin, S.; Fleischer, J.
2019. Technologies for economical and functional lightweight design – Conference proceedings 2018. Ed.: K. Dröder, 147–154, Springer Verlag. doi:10.1007/978-3-662-58206-0_14
Safe Human Robot Collision Avoidance with an End-Effector integrated 360° LiDAR System
Schäfer, M.; Büsching, M.; Coutandin, S.; Fleischer, J.
2019. S. Vieweg (Ed.), Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter. Hrsg.: Thorsten Schüppstuhl, Kirsten Tracht, Jürgen Roßmann, 138–147, Springer Verlag. doi:10.1007/978-3-662-59317-2_14
Model-Based Assembly Optimization for Unbalance-Minimized Production Automation of Electric Motors
Wößner, W.; Peter, M.; Hofmann, J.; Fleischer, J.
2019. Advances in Production Research – Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018. Ed.: R. Schmitt, 551–562, Springer International Publishing. doi:10.1007/978-3-030-03451-1_54
Efficient parameter development strategy of tool steel materials for Laser Additive Manufacturing
Graf, G.; Leoni, M.; Müller, T.; Fischer-Bühner, J.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2019. HI-AM 2020 — Holistic Innovation in Additive Manufacturing 2020, 25th - 26th June 2020
Disturbance Force Estimation for a Low Pressure Suction Gripper Based on Differential Pressure Analysis
Wirth, B.; Coutandin, S.; Fleischer, J.
2020. Annals of Scientific Society for Assembly, Handling and Industrial Robotics. Ed.: T. Schüppenstuhl, 263–273, Springer Vieweg. doi:10.1007/978-3-662-61755-7
Demontageeffektor für Schraubverbindungen mit ungewissem Zustand – Systematische Entwicklung eines robotergeführten Schraubwerkzeugs für das Remanufacturing
Rieß, S.; Laub, J.; Coutandin, S.; Fleischer, J.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (10), 711–714. doi:10.3139/104.112401
SLS-Prozess für endlosfaserverstärkte Kunststoffbauteile
Baranowski, M.; Moll, P.; Coutandin, S.; Fleischer; Jürgen
2020. VDI-Z Integrierte Produktion, (5)
Evaluation of fiber placement strategies for the implementation of continuous reinforcement fibers in selective laser sintering process
Moll, P.; Pirrung, F.; Baranowski, M.; Coutandin, S.; Fleischer, J.
2020. International SAMPE Conference and Exhibition 2020 : online, 1st June 2020, Volume 1, 71–84, Curran
Production and Tensile Testing of Rotationally Molded Hybrid Composite Tie Rods
Nieschlag, J.; Coutandin, S.; Fleischer, J.
2020. International SAMPE Conference and Exhibition 2020 : online, 1st June 2020, Volume 2, 1008–1018, Curran
Werkstückerkennung mit Greifsystemen
Friedmann, M.; Köse, H.; Roth, S.; Wirth, B.; Coutandin, S.; Fleischer, J.
2020. Robotik und Produktion, 2020 (5), 32–33
Autoconfiguration of a Vibration-Based Anomaly Detection System with Sparse a-priori Knowledge Using Autoencoder Networks
Hillenbrand, J.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 518–527, Springer Verlag. doi:10.1007/978-3-662-62138-7_52
Value Stream Kinematics
Mühlbeier, E.; Gönnheimer, P.; Hausmann, L.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 409–418, Springer Verlag. doi:10.1007/978-3-662-62138-7_41
Erhöhung der Skalierbarkeit von KI-Anwendungen in Produktionsanlagen – durch intelligente Parameteridentifikation und Datensegmentierung
Gönnheimer, P.; Netzer, M.; Mohr, L.; Hörsten, G. von; Fleischer, J.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 517–519. doi:10.3139/104.112318
Automated Identification of Parameters in Control Systems of Machine Tools
Gönnheimer, P.; Puchta, A.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 568–577, Springer Verlag. doi:10.1007/978-3-662-62138-7_57
Influence of the process parameter of resistance spot welding and the geometry of weldable load introducing elements for FRP/metal joints on the heat input
Roth, S.; Hezler, A.; Pampus, O.; Coutandin, S.; Fleischer, J.
2020. Journal of Advanced Joining Processes, 2, Artkl.Nr.: 100032. doi:10.1016/j.jajp.2020.100032
Detektion von frühzeitigen Oberflächenzerrüttungen
Schlagenhauf, T.; Ruppelt, P.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7/8), 501–506. doi:10.37544/1436-4980-2020-07-08-45
Detektion des Vorspannungsverlusts in Kugelgewindetrieben
Veith, M.; Zimmermann, A.; Hillenbrand, J.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7/8), 485–490. doi:10.37544/1436-4980-2020-07-08-29
Investigation of automated nibbling as an alternative cutting technology for machining of fiber-reinforced polymers
Langer, J.; Gerstenmeyer, M.; Schulze, V.
2020. Hybrid 2020 Materials and Structures : 4th International Conference, 28 – 29 April 2020 Web-Conference, Germany, Proceedings. Ed.: J. M. Hausmann, 261–267
Skalierbarkeit von KI-Anwendungen in der Produktion
wbk Institut für Produktionstechnik des KIT; Netzer, M.; Gönnheimer, P.; Michelberger, J.; Fleischer, J.
2020. Fabriksoftware, 2020 (1), 51–54. doi:10.30844/FS20-1_51-54
Fibre-metal elastomer laminates ? Lightweight components with superior damping characteristics
Rothaupt, B.; Roth, S.; Yu, L.; Fleischer, J.
2020. JEC Composites Magazine, 27, 151–153
Additive Manufacturing of Metal Components using the ARBURG freeformer System
Kupzik, D.; Spiller, Q.; Coutandin, S.; Fleischer, J.
2020. Holistic innovation in Additive Manufacturing
Wälzschälen mit kleinen Achskreuzwinkeln : Prozessgrenzen und Umsetzbarkeit. PhD dissertation
Vargas, B.
2022, August 5. Shaker Verlag
Thermal insulation and laser-based preheating method for processing a ledeburitic tool steel in LPBF
Graf, G.; Leoni, M.; Müller, T.; Fischer-Bühner, J.; Frey, M.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2020. Holistic innovation in Additive Manufacturing
Fabrication of composite truss structures by combination of robotic filament winding and 3D printed adhesive elements
Denk, F.; Redmann, A.; Nieschlag, J.; Dackweiler, M.; Coutandin, S.; Miller, D.; Mecham, S.; Oswald, T. A.; Fleischer, J.
2021. Composites and Advanced Materials Expo (CAMX 2021) : Dallas, Texas, USA, 19th - 21st October 2021; Volume 2, 793 -, Curran
Flexibles, stückzahlskalierbares Stapeln von Brennstoffzellen unter Berücksichtigung vorangelagerter taktgebender Prozesse
Schäfer, J.; Fleischer, J.
2021. Future mobility : automatisiert - vernetzt - elektrisch : 21. September 2021, S. 9
Hybridization of Fused Filament Fabrication Components by Stereolithographic Manufactured Thermoset Inserts
Baranowski, M.; Schlotthauer, T.; Netzer, M.; Gönnheimer, P.; Coutandin, S.; Fleischer, J.; Middendorf, P.
2021. Recent Advances in Manufacturing Engineering and Processes : Proceedings of ICMEP 2021. Ed. by R. K. Agarwal, 3–14, Springer Singapur. doi:10.1007/978-981-16-3934-0_1
Efficient Qualification Strategy of New Steel Alloys for Laser Powder Bed Fusion
Graf, G.; Neuenfeldt, M.; Müller, T.; Fischer-Bühner, J.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2021. Advanced Materials Research, 2021 (1161), 27–36. doi:https://doi.org/10.4028/www.scientific.net/AMR.1161.27
Working point determination of 3MA micromagnetic NDT-technique for production integrated detection of white layer during turning of AISI4140
Böttger, D.; Stampfer, B.; Gauder, D.; Lanza, G.; Schulze, V.; Straß, B.; Wolter, B.
2021. Procedia CIRP, 101, 9–12. doi:10.1016/j.procir.2021.02.002
Modular and flexible Automation Middleware based on LabVIEW and OPC UA
Künzel, A.; Puchta, A.; Gönnheimer, P.; Fleischer, J.
2021. 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, Art.Nr.: 012109, Institute of Physics Publishing Ltd (IOP Publishing Ltd)
A new approach for local cutting force modeling enabling the transfer between different milling conditions and tool geometries
Hilligardt, A.; Böhland, F.; Klose, J.; Gerstenmeyer, M.; Schulze, V.
2021. 18th CIRP Conference on Modeling of Machining Operations, 102, 138–143. doi:10.1016/j.procir.2021.09.024
Concept Development and Validation of Manufacturing Processes for Integrating Current-Carrying Conductors in Ceramic Substrates
Schubert, J.; Rosen, M.; Zanger, F.
2022. B.-A. Behrens, A. Brosius, W.-G. Drossel, W. Hintze, S. Ihlenfeldt & P. Nyhuis (Eds.), Production at the Leading Edge of Technology : Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Ed. by Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, 339–348, Springer International Publishing. doi:10.1007/978-3-030-78424-9_38
Predictive Maintenance in der Antriebstechnik
Armbruster, J.; Gönnheimer, P.; Netzer, M.
2021, September
Wear-resistive thin-film sensors on cutting tools for in-process temperature measurement
Plogmeyer, M.; González, G.; Biehl, S.; Schulze, V.; Bräuer, G.
2021. Procedia CIRP, 2021, 85–88. doi:10.1016/j.procir.2021.02.011
Leichtbau ganzheitlich denken
Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.; Scholz, J.; Kaspar, J.; Ruhland, P.; Coutandin, S.
2021. VDI-Z, 163 (07-08), 70–71. doi:10.37544/0042-1766-2021-07-08-70
Stirnradbearbeitung im Tauchgleitschleifen
Neuenfeldt, P.; Brennenstuhl, F.; Schulze, V.
2021. wt Werkstattstechnik online, 111 (07-08), 403–407. doi:10.37544/1436–4980–2021–06–47
Intrinsische Hybridverbunde für Leichtbautragstrukturen – Grundlagen der Fertigung, Charakterisierung und Auslegung
Gude, M.; Barfuß, D.; Coutandin, S.; Fleischer, J.; Grützner, R.; Hirsch, F.; Kästner, M.; Müller-Pabel, M.; Müller, R.; Nieschlag, J.; Ruhland, P.; Würfel, V.
2021. Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Verlag. doi:10.1007/978-3-662-62833-1
Web-based platform for planning and configuration of robot-based automation solutions: A retrospective view on the research project ROBOTOP
Schäffer, E.; Gönnheimer, P.; Kupzik, D.; Brossog, M.; Coutandin, S.; Franke, J.; Fleischer, J.
2022. Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Ed.: T. Schüppstuhl, 387–397, Springer International Publishing. doi:10.1007/978-3-030-74032-0_32
Agile Produktion elektrischer Traktionsmotoren als Antwort auf volatile Märkte und Technologien
Fleischer, J.; Pfund, T.; Wirth, F.; Fraider, F.; Halwas, M.; Hausmann, L.; Wößner, W.
2021. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2021 (3), 128–132. doi:10.1515/zwf-2021-0025
Experimental Parameter Identification for the Bending Based Preforming of Thermoplastic UD -tape
Kupzik, D.; Bachtin, A.; Coutandin, S.; Fleischer, J.
2021. (K. Dröder & T. Vietor, Eds.), Springer Verlag. doi:10.1007/978-3-662-62924-6
Development and Implementation of a Compact Winding Process
Halwas, M.; Ambs, P.; Sell-Le Blanc, F.; Weiße, L.; Hofmann, J.; Fleischer, J.
2020. 10th International Electric Drives Production Conference (EDPC), Ludwigsburg, Germany, 08-09 December 2020, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388198
Kompaktwickelprozess zur Herstellung verteilter Wicklungen
Halwas, M.; Wirth, F.; Fleischer, J.
2021. ZWF, 2021 (3), 124–127. doi:10.1515/zwf-2021-0024
Additives Roboter-Extrusions-System
Matkovic, N.; Götz, M.; Kupzik, D.; Nieschlag, J.; Coutandin, S.; Fleischer, J.
2021. VDI-Z, 163 (01-02), 55–57. doi:10.37544/0042-1766-2021-01-02-55
A Maturity Model for Smart Product-Service Systems
Heinz, D.; Benz, C.; Silbernagel, R.; Molins, B.; Satzger, G.; Lanza, G.
2022. Procedia CIRP, 107, 113–118. doi:10.1016/j.procir.2022.04.019
Anwendung von Datenanalyse im Qualitätsmanagement : Ein integriertes Vorgehensmodell = Application of Data Analysis in Quality Management : An Integrated Process Model
Frey, A. M.; Pampus, O.; Stadler, F.; Erdler, G.-A.; Lanza, G.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (4), 182–186. doi:10.1515/zwf-2022-1043
Functional Integration of Subcomponents for Hybridization of Fused Filament Fabrication
Baranowski, M.; Schlotthauer, T.; Netzer, M.; Gönnheimer, P.; Coutandin, S.; Fleischer, J.; Middendorf, P.
2022. International Journal of Mechanical Engineering and Robotics Research, 11 (5), 319–325. doi:10.18178/ijmerr.11.5.319-325
Determination of constitutive friction laws appropriate for simulation of cutting processes
Schulze, V.; Bleicher, F.; Courbon, C.; Gerstenmeyer, M.; Meier, L.; Philipp, J.; Rech, J.; Schneider, J.; Segebade, E.; Steininger, A.; Wegener, K.
2022. CIRP Journal of Manufacturing Science and Technology, 38, 139–158. doi:10.1016/j.cirpj.2022.04.008
Advanced steps to optimize the serviceability
Lanza, G.; Behmann, B.
2011. J. Frick & B. T. Laugen (Eds.), Advances in Production Management Systems. Value Networks: Innovation, Technologies, and Management Hrsg.: J. Frick, Springer
How Can Machine Tool and Plant Manufacturers Increase the Trustability of the Needed Reliability Figures?
Lanza, G.; Appel, D.; Werner, P.
2011. 2011 Symposium Proceedings: International Applied Reliability Symposium Europe 2011, 1–43, ReliaSoft Corporation
TCO 2.0-Ein Weg zu mehr Transparenz und Kommunikation
Lanza, G.; Appel, D.; Stricker, N.
2013. wt Werkstattstechnik online, 103 (7-8), 605–609
Reliability-dependent choice of spare part provision and maintenance strategies at optimal cost as an offered service
Lanza, G.; Appel, D.
2012. 11th International Probabilistic Safety Assessment and Management Conference and The Annual European Safety and Reliability Conference (PSAM11 ESREL 2012), 212–221, Curran
Economic Potential of Reliability Data in the Application of Spare Part Provision
Lanza, G.; Appel, D.
2012. International Applied Reliability Symposium Europe 2012, 44 S
Zielsystembasiertes Qualitätsmanagement in globalen Supply Chains
Lanza, G.; Book, J.; Holtz, I. Freiin vom
2012. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 107 (4), 244–249. doi:10.3139/104.110744
Statistical process and measurement control for micro production
Lanza, G.; Fleischer, J.; Schlipf, M.
2008. Microsystem Technologies, 14 (9-11), 1227–1232. doi:10.1007/s00542-007-0508-9
Qualitätssicherung für Mikrofertigungsprozesse und urgeformte Mikrobauteile
Lanza, G.; Fleischer, J.; Schlipf, M.
2007. Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen ; 22. und 23. November 2007, Karlsruhe. Hrsg.: O. Kraft, 121–127, Forschungszentrum Karlsruhe (FZKA)
A Simulation based Resource Planning Model for Production Ramp-ups
Lanza, G.; Fleischer, J.; Ender, T.
2007. Proceedings of the 40th CIRP International Seminar on Manufacturing Systems 2007
Modeling of Quality Development during Production Ramp-up by Elementary Processes
Lanza, G.; Fleischer, J.; Ender, T.
2006. P. Butala (Ed.), The morpholoty of innovative manufacturing systems : 39th CIRP International Seminar on Manufacturing Systems, Ljubljana, June 7th - 9th, 2006. Ed.: P. Butala, 505–510, University of Ljubljana
OEE-Prognose im Produktionsanlauf: Simulationsbasierte Anlaufunterstützung mittels Kennzahlen
Lanza, G.; Fleischer, J.
2005. wt Werkstattstechnik online, 95 (7/8), 554–558
ProactAS - Die Idee
Lanza, G.; Ender, T.
2007. J. Fleischer (Ed.), Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 1–10, VDMA Verlag
Wie Industrie 4.0 die Steuerung von Produktion und Supply Chain verändern wird
Lanza, G.; Buergin, J.; Berger, D.; Peters, S.
2015. P. Horváth & U. Michel (Eds.), Controlling im digitalen Zeitalter Hrsg.: Horváth, Péter; Michel, Uwe, 87–100, Schäffer-Poeschel Verlag
Timesaving quality assurance for the automated preforming process in the automobile serial production of carbon composites
Lanza, G.; Brabandt, D.; Bingemann, P.
2013. S. van Hoa (Ed.), 19th International Conference on Composite Materials (ICCM) 2013 Hrsg.: Hoa, Suong van, 8309–8317, Curran
Sustainable Automated Production of Fiber Reinforced Plastics (FRP) through Inline Quality Assurance
Lanza, G.; Brabandt, D.
2012. 10th Global Conference on Sustainable Manufacturing (GCSM) 2012, 10th Global Conference on Sustainable Manufacturing, Conference, in-person 31st October - 2nd November 2012, Istanbul Turkey, 123–127
Developing the process chain of selective laser melting towards a cost efficient series production
Kopf, R.; Lingen, A.; Lanza, G.
2016. 6th International Conference on Additive Technologies - iCAT 2016 : proceedings : Nürnberg, Germany, 29.-30. November 2016 : DAAAM Specialized Conference. Ed.: I. Drstvenšek, 368–376, Interesansa
Kreislaufwirtschaft in Produktionsnetzwerken : Parameter und Stellschrauben für die erfolgreiche Umsetzung nachhaltiger Produktionsprinzipien
Klenk, F.; Potarca, M.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (10), 668–672. doi:10.3139/104.112384
Prozessfähigkeitsuntersuchung mit Messunsicherheit: Ein Ansatz zur Korrektur des Einflusses der Messunsicherheit
Kippenbrock, K.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (7-8), 555–559
Flexible Mass Customisation - Proceedings of the 8th CIRP Global Web Conference
Kellens, K.; Ferraris, E.; Demeester, E. (Eds.)
2021. Elsevier B.V
Development of test bodies for deployment in Industrial Computed Tomography
Kraemer, A.; Batra, A.; Lanza, G.
2016. 6th Conference on Industrial Computed Tomography (iCT) 2016 : 9-12 February 2016, Wels, 1–8, FH Oberösterreich
Optimierung von Aufnahmeparametern mittels projektionsbasierter Qualitätskenngrößen in der industriellen Computertomographie
Kraemer, A.; Boehmler, P.; Lanza, G.
2016. Sensoren und Messsysteme 2016 : 18. GMA/ITG-Fachtagung, Nürnberg Convention Center, 10. und 11. Mai 2016 : Tagungsband, 383–390, AMA Service
Investigation of closed-loop supply chains with product refurbishment as integrated location-inventory problem
Kuhnle, A.; Lanza, G.
2019. Production Engineering - Research and Development, 13 (3-4), 293–303. doi:10.1007/s11740-019-00885-4
Intelligente Produktionsplanung und -steuerung - Erlernen optimaler Entscheidungen
Kuhnle, A.; Kuttler, M.; Duempelmann, M.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (9), 625–629
Bericht der Promotorengruppe Mobilität : Empfehlungen zum Zukunftsprojekt "Nachhaltig bewegt, energieeffizient mobil"
Kreimeyer, A.; Lanza, G.; Weber, T.; Wittenstein, M. (Eds.)
2012. Forschungsunion Wirtschaft - Wissenschaft
Methodology for the evaluation of CT image quality in dimensional metrology
Kraemer, A.; Lanza, G.
2016. 19th WCNDT 2016 : World Conference on Non-Destructive Testing ; 13 - 17 June, Germany . Ed.: M. Purschke, 1–7, Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZFP)
Projection based evaluation of CT image quality in dimensional metrology
Kraemer, A.; Kovacheva, E.; Lanza, G.
2015. International Symposium on Digital Industrial Radiology and Computed Tomography (DIR) 2015, 22.-25. Juni 2015, Gent, Belgien, 1–10, NDT.net
Data Mining Approach for Identifying Optimal Process Parameters in Micro-Manufacturing
Lanza, G.; Fleischer, J.; Viering, B.; Klimscha, K.; Kippenbrock, K.; Stockey, S.
2011. P. Shore, H. Spaan, T. Burke & H. van Brussel (Eds.), 11th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2011. Hrsg.: P. Shore, 467–470, European Society for Precision Engineering and Nanotechnology (euspen)
Sustainability Optimization for Global Supply Chain Decision-making
Bhinge, R.; Moser, R.; Moser, E.; Lanza, G.; Dornfeld, D.
2015. (G. Seliger & N. M. Yusof, Eds.) 12th Global Conference on Sustainable Manufacturing - Emerging Potentials Hrsg.: Seliger, Günther; Yusof, Noordin M., 26, 323–328. doi:10.1016/j.procir.2014.07.105
Predictive quality control of hybrid metal-CFRP components using information fusion
Berger, D.; Zaiß, M.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.; Pohl, M.; Günther, F.; Stommel, M.
2018. Production Engineering - Research and Development, 12 (2), 161–172. doi:10.1007/s11740-018-0816-1
Quality Risk Management in Global Supply Networks: An Agent-Based Approach
Book, J.; Kumar, M.; Lanza, G.; Srai, J.
2012. 16th Cambridge International Manufacturing Symposium 2012, 1–40. doi:10.13140/RG.2.1.2139.2406
Implementierung von unternehmensübergreifender Traceability – Entwicklung, Implementierung und Bewertung von Traceability-Systemen entlang des gesamten Produktlebenszyklus
Benfer, M.; Gartner, P.; Treber, S.; Kuhnle, A.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (5), 304–308. doi:10.3139/104.112284
5th CIRP Conference on Surface Integrity (CSI 2020)
Arrazola, P. J.; Madariaga, A. (Eds.)
2020
Steuerung globaler Produktionsnetzwerke: Entwicklung eines Standortrollenmodells zur dynamischen Bewertung von Gestaltungsmaßnahmen
Arndt, T.; Lemmerer, C.; Biegler, C.; Sihn, W.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (4), 241–246
Eine automatisierungsgerechte robuste Produktionsplanung : Robustheit der Planung im Netzwerk unter Auftragsunsicherheit = Robust Production Planning Suitable for Automation
Brützel, O.; Küppers, F.; Overbeck, L.; Stricker, N.; Verhaelen, B.; Lanza, G.
2021. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (1-2), 44–48. doi:10.1515/zwf-2021-0009
Großserientaugliche Verbindungselemente für den hybriden Leichtbau – Effects of Defects
Brabandt, D.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Hermann, H.; Pohl, M.; Stommel, M.
2015. Lightweight Design, 8 (2), 48–53. doi:10.1007/s35725-015-0021-5
Comparison of anomaly detection capabilities of pulse phase thermography in transmission and reflection setup on Sheet Molding Compound
Bretz, L.; Wilke, M.; Häfner, B.; Lanza, G.
2020. Proceedings : 4th International Conference, Hybrid 2020, Materials and Structures, 28 - 29 April 2020, Web Conference, Germany. Ed.: J. M. Hausmann, 108–115, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Design and quality assurance of intrinsic hybrid metal-CFRP lightweight structures
Bretz, L.; Günther, F.; Jost, H.; Schwarz, M.; Kretzschmar, V.; Pohl, M.; Weiser, L.; Häfner, B.; Summa, J.; Herrmann, H.-G.; Stommel, M.; Lanza, G.
2020. Proceedings : 4th International Conference, Hybrid 2020, Materials and Structures, 28 - 29 April 2020, Web Conference, Germany. Ed.: J. M. Hausmann, 144–159, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Inline metrology of carbon fiber preforms as an indicator of mechanical properties of consolidated CFRP parts
Brabandt, D.; Lanza, G.
2015. 12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components (ICM) 2012, 339
Data Processing for an Inline Measurement of Preforms in the CFRP-Production
Brabandt, D.; Lanza, G.
2015. R. Teti (Ed.), 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ’14. Hrsg.: Teti, Roberto, 9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME) 2014. 23.07.2014-25.07.2014, Capri, Italien, 269–274, Elsevier. doi:10.1016/j.procir.2015.06.048
Messtechnik für die Qualitätssicherung von Carbonfaser-Preforms – Automobilbau
Brabandt, D.; Hettich, S.; Lanza, G.
2015. Lightweight Design, 8 (6), 20–25. doi:10.1007/s35725-015-0049-6
Customer-driven Planning and Control of Global Production Networks - Balancing Standardisation and Regionalisation
Arndt, T.; Hochdoerffer, J.; Moser, E.; Peters, S.; Lanza, G.
2015. Cambridge International Manufacturing Symposium 2014 proceedings : proceedings of the 18th Cambridge International Manufacturing Symposium - September 2014 / IfM - Management, Technology, Policy, 60–74, University of Cambridge, Institute for Manufacturing
Tagungsband 18. GMA/ITG-Fachtagung Sensoren und Messsysteme 2016
VDI-/VDE-Gesellschaft (Ed.)
2016. AMA Service
International Symposium on Digital Industrial Radiology and Computed Tomography (DIR) 2015
Fraunhofer Development Center X-ray Technology EZRT (Ed.)
2015. NDT.net
6th IFAC Conference on Management and Control of Production and Logistics 2013
Internationale Förderung für Automatische Lenkung (Ed.)
2013. Curran
2013 3rd International Electric Drives Production Conference (E|DPC)
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
Simulation-Based Evaluation of Quality Control Strategies in Global Manufacturing Networks
Arndt, T.; Buderer, C.; Hofmann, M.; Lanza, G.
2016. Advanced Materials Research, 1140, 473–480. doi:10.4028/www.scientific.net/AMR.1140.473
8th Conference on Industrial Computed Tomography (iCT) 2018, 6-9 Feb, Wels, Austria (iCT 2018)
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2018. NDT.net
10th Conference on Industrial Computed Tomography (iCT) 2020, 4-7 Feb, Wels, Austria
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2020. NDT.net
Proceedings : 4th International Conference Hybrid 2020 Materials and Structures 28 – 29 April 2020 Web-Conference, Germany
Hausmann, J. M.; Siebert, M.; Hehl, A. von; Weidenmann, K. A.
2020. Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Interdisciplinarity as a success factor - service and reliability planning integrated in a production model
Appel, D.; Genssler, K.; Stricker, N.; Lanza, G.
2013. R. D. J. M. Steenbergen, P. van Gelder, S. Miraglia & A. C. W. M. T. Vrouwenvelder (Eds.), Safety, reliability and risk analysis: beyond the horizon Hrsg.: Steenbergen, Raphaël D. J. M.; Gelder, Pieter van; Miraglia, Simona; Vrouwenvelder, A. C. W. M. Ton, 1325–1332, CRC Press-Taylor & Francis Group
Controlling im digitalen Zeitalter: Herausforderungen und Best-Practice-Lösungen
Horváth, P.; Michel, U. (Eds.)
2015. Schäffer-Poeschel Verlag
Towards a User Support System for Computed Tomography Measurements Using Machine Learning
Höger, K.; Schäfer, L.; Schild, L.; Lanza, G.
2021. Production at the Leading Edge of Technology: Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Edited by Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, 506–514, Springer. doi:10.1007/978-3-030-78424-9_56
Development of an agile development method based on Kanban for distributed part-time teams and an introduction framework
Hofmann, C.; Lauber, S.; Haefner, B.; Lanza, G.
2018. (D. Mourtzis & G. Chryssolouris, Eds.) Advanced Engineering Education & Training for Manufacturing Innovation Hrsg.: Mourtzis, Dimitris; Chryssolouris, George, 23, 45–50. doi:10.1016/j.promfg.2018.03.159
The Impact of Routing and Operation Flexibility on the Performance of Matrix Production Compared to a Production Line
Hofmann, C.; Brakemeier, N.; Krahe, C.; Stricker, N.; Lanza, G.
2018. R. Schmitt & G. Schuh (Eds.), Advances in Production Research Hrsg.: Schmitt, Robert; Schuh, Günther, 155–165, Springer International Publishing. doi:10.1007/978-3-030-03451-1_16
Modelle zur Vorhersage von Produktionskosten - Stochastische Kostenprognose im Rahmen der Elektromobilität
Hochdoerffer, J.; Henkes, P.; Peters, S.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 238–243
Vorgehensmodell zur Einführung von Industrie 4.0: Vorstellung eines Vorgehensmodells zur bedarfsgerechten Einführung von Industrie 4.0-Methoden
Huebner, M.; Liebrecht, C.; Malessa, N.; Kuhnle, A.; Nyhuis, P.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (4), 266–272
Deutsch-chinesische Industriekooperationen - Industrielle Synergien zwischen Baden-Württemberg und dem Suzhou Industrial Park
Hochdoerffer, J.; Buergin, J.; Lanza, G.
2015. Industrie-Management, 57 (5), 57–61
Resource-Based Reconfiguration of Manufacturing Networks Using a Product-to-Plant Allocation Methodology
Hochdoerffer, J.; Berndt, C. V.; Lanza, G.
2016. CIRP International Conference on Competitive Manufacturing (COMA) 2016, 27th - 29th January 2016, Stellenbosch, South Africa, 511–516
Evaluation of global manufacturing networks - a matter of perspective
Hochdoerffer, J.; Arndt, T.; Buergin, J.; Moser, E.; Scherb, M.; Lanza, G.
2015. International manufacturing - revisited: embracing new technologies, capabilities and markets : 19th Cambridge International Manufacturing Symposium, 24-25 September 2015 : conference proceedings, 327–339, University of Cambridge
Anwendung von Axiomatic Design zur Entwicklung von Wärmetauschersystemen
Hermann, H.; Eckstein, J.; Lanza, G.; Peters, S.; Behmann, B.; Roth, J.
2011. J. Gausemeier, F. Rammig, W. Schäfer & A. Traechtler (Eds.), Entwurf mechatronischer Systeme: Grundlagen, Methoden und Werkzeuge ; Adaption, Selbstoptimierung und Verlässlichkeit ; Integration Mechanik und Elektronik, Miniaturisierung: 8. Paderborner Workshop Entwurf Mechatronischer Systeme, 19. und 20. Mai 2011, Heinz-Nixdorf-MuseumsForum ; [Wissenschaftsforum Intelligente Technische Systeme. Heinz-Nixdorf-Institut, Universität Paderborn].. Hrsg.: Jürgen Gausemeier, 123–132, Universität Paderborn
Evaluating trade-offs between sustainability, performance, and cost of green machining technologies
Helu, M.; Rühl, J.; Dornfeld, D.; Werner, P.; Lanza, G.
2011. Glocalized Solutions for Sustainability in Manufacturing. Hrsg.: Jürgen Hesselbach, Christoph Herrmann. Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011, 195–200, Springer. doi:10.1007/978-3-642-19692-8_34
International Symposium on Structural Health Monitoring and Nondestructive Testing 2018
htw saar | University of Applied Sciences (Ed.)
2018. NDT.net
2016 6th International Electric Drives Production Conference (E|DPC): November 30th-December 1st, 2016, Nuremberg, Germany : proceedings
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2016. Institute of Electrical and Electronics Engineers (IEEE)
Development of a Human-centered Industry 4.0 Philosophy
Kandler, M.; Lanza, G.; Krahe, C.
2020. M. Liewald (Ed.), New Developments in Sheet Metal Forming (NEBU 2020) Hrsg.: Liewald, Mathias, 123–135, Institute for Metal Forming Technology of University of Stuttgart
Digitales, agiles Management auf dem Shopfloor – Entwicklung eines Ansatzes zur Neugestaltung der Managementsysteme in der Produktion
Kandler, M.; Kurtz, J. J.; Stricker, N.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (1-2), 23–26. doi:10.3139/104.112241
Planning, Evaluation and Optimization of Product Design and Manufacturing Technology Chains for New Product and Production Technologies on the Example of Additive Manufacturing
Jacob, A.; Windhuber, K.; Ranke, D.; Lanza, G.
2018. (F. Laroche & A. Bernard, Eds.) 28th CIRP Design Conference 2018 Hrsg.: Laroche, Florent; Bernard, Alain, 70, 108–113. doi:10.1016/j.procir.2018.02.049
Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
Jacob, A.; Künneke, T.; Lieneke, T.; Baumann, T.; Stricker, N.; Zimmer, D.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (11), 742–745. doi:10.3139/104.112005
Fabrikplanung für die additive Fertigung: Integration von Spezifika der additiven Fertigung und Industrie 4.0 in die Fabrikplanung
Jacob, A.; Hillermeier, M.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (4), 278–283
11th IMEKO TC-14 International Symposium on Measurement and Quality Control (ISMQC 2013) : Cracow [and Kielce], Poland, 11 - 13 September 2013
International Measurement Confederation. Technical Committee Measurement of Geometrical Quantities (Ed.)
2013. Curran
IEEE International Conference on Automation Science and Engineering (CASE) 2013: 17 - 20 Aug. 2013, Madison, WI, USA
Institute of Electrical and Electronics Engineers IEEE Robotics and Automation Society (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2013: 10 - 13 Dec. 2013, Bangkok, Thailand
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
International manufacturing - revisited: embracing new technologies, capabilities and markets: 19th Cambridge International Manufacturing Symposium, 24-25 September 2015 : conference proceedings
Cambridge International Manufacturing Symposium (Ed.)
2015. University of Cambridge, Institute for Manufacturing, Department of Engineering
2017 IEEE International Conference on Industrial Engineering & Engineering Management: IEEE IEEM2017 : 10-13 Dec, Singapore
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2017. Institute of Electrical and Electronics Engineers (IEEE)
IEEM 2016: International Conference on Industrial Engineering and Engineering Management : 4-7 December 2016, Bali, Indonesia
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2016. Institute of Electrical and Electronics Engineers (IEEE)
Total cost analysis of process time reduction as a green machining strategy
Helu, M.; Behmann, B.; Meier, H.; Dornfeld, D.; Lanza, G.; Schulze, V.
2012. D. Dornfeld & B. S. Linke (Eds.), Leveraging Technology for a Sustainable World. Hrsg.: Dornfeld, David; Linke, Barbara S. Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23 - 25, 2012, 299–304, Springer Berlin Heidelberg. doi:10.1007/978-3-642-29069-5_51
Prognose des Driftverhaltens getakteter Montagelinien - Ein Warteschlangenmodell zur Analyse von Arbeitsplätzen bei Variantenfließmontage
Gans, J.; Lanza, G.; Mueller, R.; Peters, S.; Schoen, L.
2011. wt Werkstattstechnik online, 101 (3), 162–166
Configuring the right global manufacturing network: Comparison of two practical processes
Grallert, S.; Fleet, D.; Lanza, G.; Moser, R.; Shi, Y.; Ude, J.
2010. M. Gregory, J. Srai & Y. Shi (Eds.), The 15th annual Cambridge International Manufacturing Symposium, 23rd-24th September 2010, Møller Centre, Cambridge, 1–22, University of Cambridge
Product Lifecycle Management – Geometric Variations
Giordano, M.; Mathieu, L.; Villeneuve, F. (Eds.)
2010. John Wiley and Sons. doi:10.1002/9781118557921
11th CIRP International Conference on Computer Aided Tolerancing, Annecy, France, 26-27 March 2009
Giordano, M. (Ed.)
2009. Association for Computing Machinery (ACM)
Proceedings of the APMS 2010 International Conference on Advances in Production Management Systems
Garetti, M.; Taisch, M.; Cavalieri, S.; Terzi, S.; Tucci, M. (Eds.)
2010. Ciemme S.p.A
Next Level Production Networks
Friedli, T.; Schuh, G.; Lanza, G.; Remling, D.; Gützlaff, A.; Stamer, F.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (3), 101–104. doi:10.3139/104.112057
Industrie 4.0 – ein Beitrag zur Entwicklung von „Smart Networks“
Friedli, T.; Lanza, G.; Schuh, G.; Reuter, C.; Arndt, T.; Fränken, B.; Lützner, R.; Wenking, M.
2015. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (6), 378–382. doi:10.3139/104.111343
Erfolgsfaktor Qualität - 20 Jahre FQS : 11. FQS-Forschungstagung 2009 ; 21. Oktober 2009, Frankfurt am Main
Deutsche Gesellschaft für Qualität, DGQ (Ed.)
2009. Forschungsgemeinschaft Qualität (FQS)
Skalierbare Automatisierung und Industrie 4.0
Greinacher, S.; Echsler Minguillon, F.; Haefner, B.; Stricker, N.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (9), 659–665
Zukunftsthemen der Fabrik - Wohin geht der Trend? Ergebnisse einer umfangreichen Online-Umfrage des VDI-Fachausschusses Fabrikplanung
Heinen, T.; Peter, K.; Erlach, K.; Nyhuis, P.; Lanza, G.; Westkämper, E.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 405–409. doi:10.3139/104.110316
Finite element analysis of micro gears for the prediction of their lifetime
Haefner, B.; Quiring, M.; Hirtler, M.; Lanza, G.
2014. R. Leach (Ed.), Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology : June 2nd-6th, 2014, Dubrovnik, Croatia Hrsg.: Leach, R., 277–280, European Society for Precision Engineering and Nanotechnology (euspen)
Finite Element Simulation for Quality Dependent Lifetime Analysis of Micro Gears
Haefner, B.; Quiring, M.; Gullasch, J.; Glaser, G.; Dmytruk, T.; Lanza, G.
2015. (V. Schulze, Ed.) 15th CIRP Conference on Modelling of Machining Operations (CMMO) 2015 Hrsg.: Schulze, Volker, 31, 41–46. doi:10.1016/j.procir.2015.03.047
Quality Dependent Lifetime Prognosis of Micro Gears
Haefner, B.; Lanza, G.
2015. V.-G. P.-. und Prozessgestaltung (Ed.), International Conference on Gears 2015, International Conference on High Performance Plastic Gears 2015, International Conference on Gear Production 2015 : Europe invites the world ; time and venue: October 5th to 7th, 2015, 217–226, VDI Verlag
Funktionsorientierte Qualitätssicherung zur Lebensdauerprognose von Mikrozahnrädern
Haefner, B.; Lanza, G.
2015. GETPRO : 5. Kongress zur Getriebeproduktion ; 25./26. März 2015 in Würzburg, 267–278, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Function-Oriented Measurements of Micro Gears for Lifetime Evaluation
Haefner, B.; Lanza, G.
2015. 17th International Conference on Sensors and Measurement Technology (SENSOR 2015) and 14th International Conference on Infrared Sensors & Systems (IRS2 2015), 19th -21st May 2015, Nuremberg, Germany, 441–446, AMA Service
Quality Value Stream Mapping
Haefner, B.; Kraemer, A.; Stauss, T.; Lanza, G.
2014. (H. A. El Maraghy, Ed.) Variety Management in Manufacturing Hrsg.: El Maraghy, Hoda A., 17, 254–259. doi:10.1016/j.procir.2014.01.093
Planung des Einsatzes von Inline-Messtechnik: Betrachtung am Beispiel der Batteriemontage als unreife Produktionstechnologie
Haefner, B.; Koelmel, A.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (11-12), 787–792
Verbesserungsstrategien in Produktionssystemen: Simulationsbasierte Bewertung des Lean- und Green-Methodeneinsatzes
Greinacher, S.; Moser, E.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (4), 260–265
Simulation Based Assessment of Lean and Green Strategies in Manufacturing Systems
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. (S. Kara, Ed.) Procedia CIRP, 29, 86–91. doi:10.1016/j.procir.2015.02.053
Schlank und ressourceneffizient produzieren: Planung und Bewertung des Lean- und Green-Methodeneinsatzes
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 231–237
Optimisation of Lean and Green Strategy Deployment in Manufacturing Systems
Greinacher, S.; Lanza, G.
2015. Applied Mechanics and Materials, 794, 478–485. doi:10.4028/www.scientific.net/AMM.794.478
Learning Factory Labs as Field-in-the-Lab Environments
Kandler, M.; Louis, S.; M., G. P.; Karoline, S.; Gisela, L.; Petra, N.
2021. 11th Conference on Learning Factories, CLF2021, SSRN
Pattern Recognition in Multivariate Time Series: Towards an Automated Event Detection Method for Smart Manufacturing Systems
Kapp, V.; May, M. C.; Lanza, G.; Wuest, T.
2020. Journal of Manufacturing and Materials Processing, 4 (3), 88. doi:10.3390/jmmp4030088
Nutzen- und Kostenprognose hybrider Produkte mittels einer Simulation der Ausfall- und Servicekosten
Lanza, G.; Behmann, B.; Niggeschmidt, S.
2009. H. Meier (Ed.), Kooperative Geschäftsmodelle zu Integration von Sach- und Dienstleistung. Hrsg.: Horst Meier, 52–72, VDMA Verlag
Quality Strategies for Supply Chains
Lanza, G.; Book, J.
2012. Global Conference on Operations and Supply Chain Management (GCOM) 2012, 12th-13th March 2012, Bandung, Indonesia, 1–15
Modeling and Simulation of Value Added Networks under Consideration of Individual Target Systems using Software Agents
Lanza, G.; Book, J.
2011. T. Krause, D. Spath & R. Ilg (Eds.), 21st International Conference on Production Research: Innovation in Product and Production (ICPR) 2011. Hrsg.: Krause, T.; Spath, Dieter; Ilg, Rolf, Held 31 July - 4 August 2011, Stuttgart, Germany, 2 235, Fraunhofer Verlag
Simulation of Life Cycle Costs of a Product Service System
Lanza, G.; Behmann, B.; Werner, P.; Voehringer, S.
2011. J. Hesselbach & C. Herrmann (Eds.), Functional Thinking for Value Creation. Hrsg.: Hesselbach, Juergen; Herrmann, Christoph. Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Technische Universität Braunschweig, Braunschweig, Germany, May 5th - 6th, 2011, 159–164, Springer Verlag. doi:10.1007/978-3-642-19689-8_29
Enhancement of the serviceability in the machine and plant industry
Lanza, G.; Behmann, B.; Werner, P.
2010. International Conference on Advances in Production Management Systems (APMS 2010) : held from 11th to 13th October 2010 in Cernobbio, Lake Como, Italy, 1–8
Process Combination of VPP-LED and Vacuum Die Casting for Producing Complex Ceramic 3D-MID
Schubert, J.; Weisser, P.; Rosen, M.; Zanger, F.; Schulze, V.
2022. Chemie-Ingenieur-Technik, 94 (7), 967–974. doi:10.1002/cite.202100208
Genauigkeitsgrenzen modularer Betontragwerke – Teil 1: Beschreibung von geometrischen Abweichungen infolge Schwinden
Stindt, J.; Frey, A. M.; Forman, P.; Lanza, G.; Mark, P.
2022. Beton- und Stahlbetonbau, 117 (5), 296–309. doi:10.1002/best.202200010
Genauigkeitsgrenzen modularer Betontragwerke – Teil 2: Probabilistische Bewertung der Montage mit Schraubenverbindung
Stindt, J.; Frey, A. M.; Forman, P.; Lanza, G.; Mark, P.
2022. Beton- und Stahlbetonbau, 117 (5), 310–323. doi:10.1002/best.202200011
Impact of workpiece shape deviations on the evaluation process in coordinate metrology
Lanza, G.; Peters, J.
2009. Proceedings of 11th CIRP International Conference on Computer Aided Tolerancing. Ed.: M. Giordano, 1–6, International Academy for Production Engineering (CIRP)
Spatial alignment of joining partners without fixtures, based on component-inherent markings
Fleischer, J.; Lanza, G.; Otter, M.; Elser, J.
2013. Journal of Manufacturing Systems, 32 (3), 489–497. doi:10.1016/j.jmsy.2013.04.004
Hybrid material extrusion 3D printing to strengthen interlayer adhesion through hot rolling
Andreu, A.; Kim, S.; Dittus, J.; Friedmann, M.; Fleischer, J.; Yoon, Y.-J.
2022. Additive Manufacturing, 55, Art.-Nr.: 102773. doi:10.1016/j.addma.2022.102773
Stochastic methods for flexiblity evaluations of production systems
Lanza, G.; Rühl, J.; Werner, P.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE) 2009, 4.-6. May, Cairo, Egypt, 401–406
Optimization model for value-added networks of globally operating companies
Lanza, G.; Ruhrmann, S.; Stricker, N.; Kohl, M.
2013. Challenges for sustainable operations : planning, implementing and managing reverse networks ; 22nd International Conference on Production Research, ICPR 22 ; July 28 - August 1, 2013 in Inguassu Falls, Brazil proceedings, 1–7, International Foundation for Production Research (IFPR)
Evaluating Procurement Objects and Suppliers in Low-Cost Countries with a Focus on Quality
Lanza, G.; Ruhrmann, S.
2012. E. Esposito (Ed.), Purchasing & Supply Management in a Changing World. Hrsg.: Emilio Esposito, 57, Elsevier
Planning Approach for Designing and Evaluating Product and Production Adaptions to Local Market Conditions
Lanza, G.; Ruhrmann, S.; Moser, E.
2013. M. F. Zaeh (Ed.), Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th 2013. Ed.: Michael F. Zaeh, 297–302, Springer. doi:10.1007/978-3-319-02054-9_50
Methodological Approach to Evaluate Product Adaptations Based on Real Options
Lanza, G.; Ruhrmann, S.
2013. A. Chakrabarti (Ed.), 22nd CIRP Design Conference 2012: Sustainable Product Development. Ed. by: Amaresh Chakrabarti, 227–237, Springer. doi:10.1007/978-1-4471-4507-322
Lieferantenqualifizierung: Ein Modell zur Entscheidungsunterstützung und -absicherung
Lanza, G.; Ruhrmann, S.
2013. wt Werkstattstechnik online, 103 (11-12), 933–938
Simulation zur Kosten-und Risikobewertung von Produktionsszenarien
Lanza, G.; Peter, K.; Peters, S.; Rühl, J.
2010. G. Zuelch & P. Stock (Eds.), Integrationsaspekte der Simulation: Technik, Organisation und Personal: Karlsruhe, 7. und 8. Oktober 2010. Hrsg.: Gert Zülch; Patricia Stock, 469–476, KIT Scientific Publishing
Auf dem Weg zum Digitalen Shopfloor Management: Eine Studie zum Stand der Echtzeitentscheidungsfähigkeit und des Industrie 4.0-Reifegrads
Lanza, G.; Hofmann, C.; Stricker, N.; Biehl, E.; Braun, Y.
2018. Karlsruher Institut für Technologie (KIT)
Laser-Strahlschmelzen - Technologie mit Zukunftspotenzial: Ein Handlungsleitfaden
Lanza, G.; Kopf, R.; Zaiß, M.; Stricker, N.; Eschner, N.; Jacob, A.; Yang, S.; Schönle, A.; Webersinke, L.; Wirsig, L.
2017. wbk Institut für Produktionstechnik
Track & Trace als Basis für die Kreislaufwirtschaft in der Automobilindustrie
Lanza, G.; Klenk, F.; Krahe, C.
2019. Werkstoffe in der Fertigung, 2019 (6), 22–23
Process Capability Indices for the Evaluation of Micro-Manufacturing Processes
Lanza, G.; Kippenbrock, K.; Kuhn, G.
2010. R. Teti (Ed.), 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering : 23 - 25 June 2010, Capri, Italy. Hrsg.: Roberto Teti, 1–4, Università degli Studi di Napoli Federico II
Reorganisation von Produktionssystemen in kleinen und mittelständischen Unternehmen mit Hilfe simulationsbasierter Prozessmuster für Lean-Methoden
Lanza, G.; Jondral, A.; Peter, K.; Toewe, H.
2010. wt Werkstattstechnik online, 100 (3), 125–130
Valuation of increased production system performance by integrated production systems
Lanza, G.; Jondral, A.; Drotleff, U.
2012. Production Engineering - Research and Development, 6 (1), 79–87. doi:10.1007/s11740-011-0359-1
Capability Assessment and Valuation of the Implementation of Lean Production Methods in Turbulent Environments
Lanza, G.; Jondral, A.; Book, J.
2011. H. A. El Maraghy (Ed.), Enabling Manufacturing Competitiveness and Economic Sustainability Hrsg.: El Maraghy, Hoda A., 524–529, Springer Verlag
Hybrides Planungswerkzeug zur adaptiven Planung innovativer Konzepte für das Zusammenwirken von Mensch und Computer im Planungsprozess
Lanza, G.; Peter, K.; Jondral, A.; Spath, D.; Korge, A.; Krause, T.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (7-8), 582–587. doi:10.3139/104.110045
Learning Factory on Global Production: Use Case Augmented Go & See
Lanza, G.; Liebrecht, C.
2019. M. Taisch, M. L. Casidsid, M. Despeisse, R. Luglietti, G. May, T. R. Morin, M. Pinzone & T. Wuest (Eds.), The 2019 World Manufacturing Forum Report. Eds.: Marco Taisch, Mark L. Casidsid, Mélanie Despeisse, Rossella Luglietti, Gökan Mayan, Teresa R. Mori, Marta Pinzone, Thorsten Wuest, 56, World Manufacturing Foundation
Learning Factory on Global Production
Lanza, G.; Moser, E.; Stoll, J.; Haefner, B.
2015. (D. Kreimeier, Ed.) 5th Conference on Learning Factories (CLF) 2015, 32, 120–125. doi:10.1016/j.procir.2015.02.081
Strategic Planning of Global Changeable Production Networks
Lanza, G.; Moser, R.
2012. (G. Chryssolouris & D. Mourtzis, Eds.) Procedia CIRP, 3, 257–262. doi:10.1016/j.procir.2012.07.045
Quantitative analysis and optimization of the effectiveness of lean methods in small batch production
Lanza, G.; Peter, K.; Broos, A.
2008. 5th Optimization and Stochastic Days 2008, 20th - 21st November, Weimar, 1–9, Dynardo GmbH
Simulation-based quantification of interdependencies between lean methods and production figures
Lanza, G.; Peter, K.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE) 2009, 4.-6. May, Cairo, Egypt, 2–9
Wandlungsfähige, menschenzentrierte Strukturen in Fabriken und Netzwerken der Industrie 4.0 (acatech Studie)
Lanza, G.; Nyhuis, P.; Fisel, J.; Jacob, A.; Nielsen, L.; Schmidt, M.; Stricker, N.
2018. Utz
Befähigungs- und Einführungsstrategien für Industrie 4.0 – Vorstellung eines reifegradbasierten Ansatzes zur Implementierung von Industrie 4.0
Lanza, G.; Nyhuis, P.; Ansari, S. M.; Kuprat, T.; Liebrecht, C.
2016. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 76–79. doi:10.3139/104.111462
Behavior of dynamic preventive maintenance optimization for machine tools
Lanza, G.; Niggeschmidt, S.; Werner, P.
2009. Annual Reliability and Maintainability Symposium (RAMS), 26th-29th Janary 2009, Fort Worth, Texas. Hrsg.: IEEE, 315–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2009.4914695
Life-Cycle Performance als Grundlage für technische Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. Informationen für die Wirtschaft : Zeitschrift der Industrie- und Handelskammer Nordschwarzwald, 2009 (1-2), 40–41
Ausfallorientierte Bewertung technischer Dienstleistungen - Entwicklung eines Demonstratortools zur Leistungskalkulation und zum Controlling
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. wt Werkstattstechnik online, 99 (7/8), 533–538
Reliability Based Spare Parts Provision for the Machine Building Industry via Adapted Service Life Prediction
Lanza, G.; Niggeschmidt, S.
2009. A. Tucson (Ed.), Symposium proceedings - International Applied Reliability Symposium 2009, 25th - 27th Marc, Barcelona, T2–S4, ReliaSoft Corporation
Ausfallgerechte Ersatzteilbereitstellung im Maschinen- und Anlagenbau mittels adaptiver Lebensdauerprognose
Lanza, G.; Niggeschmidt, S.
2009. V. W. GmbH (Ed.), Technische Zuverlässigkeit 2009 : Entwicklung und Betrieb zuverlässiger Produkte ; Leonberg, 29. und 30. April 2009, 111–122, VDI Fachmedien
Flexible und intelligente Greiftechnik
Lanza, G.; Munzinger, C.; Fleischer, J.; Ruch, D.; Elser, J.
2009. A. E. Tekkaya (Ed.), Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen : Zwischenbericht Phase 2, 1. Januar 2007 - 31. Dezember 2008. Hrsg.: A. Erman Tekkaya, 275–294, VDI Verlag
Life Cycle Performance in der Produktionstechnik - Ansätze zur Steigerung der Wettbewerbsfähigkeit
Lanza, G.; Munzinger, C.; Broos, A.; Behmann, B.; Hennrich, H.; Niggeschmidt, S.; Peters, S.; Rühl, J.; Schopp, M.; Werner, P.
2010. wt Werkstattstechnik online, 100 (7/8), 628–631
Wandlungstreiber global agierender Produktionsunternehmen: Sammlung, Klassifikation und Quantifizierung
Lanza, G.; Moser, R.; Ruhrmann, S.
2012. wt Werkstattstechnik online, 102 (4), 200–205
Globalverteile Produktionssysteme: Pragmatische Bewertung in der variantenreichen Großserienfertigung
Lanza, G.; Moser, R.; Book, J.; Braun, F.
2012. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 107 (9), 623–627
Methoden-Toolbox zur Einführung von Industrie 4.0: Identifikation und Bewertung von Industrie 4.0-Potenzialen in mittelständischen Unternehmen
Liebrecht, C.; Krogmann, M.; Stricker, N.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (4), 214–220
Digitale Führung und Technologien für die Teaminteraktion von morgen: Entwicklung eines Leitbildes für Führung und Interaktion in der digitalisierten Arbeitswelt
Malessa, N.; Ast, J.; Kandler, M.; Ströhlein, K.; Nyhuis, P.; Lanza, G.; Nieken, P.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 540–544. doi:10.3139/104.112374
16th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2018
Macchi, M.; Monostori, L.; Pinto, R. (Eds.)
2018. International Federation of Automatic Control (IFAC)
New Developments in Sheet Metal Forming (NEBU 2020)
Liewald, M. (Ed.)
2020. Universität Stuttgart
Analyse der Wirkzusammenhänge und Entscheidungsunterstützung für den Industrie 4.0-Methodeneinsatz
Liebrecht, C.; Zeranski, D.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (1-2), 79–82. doi:10.3139/104.111851
A three-step transformation process for the implementation of Manufacturing Systems 4.0 in medium-sized enterprises
Liebrecht, C.; Schwind, J.; Grahm, M.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen 2017 Hrsg.: Schmitt, Robert; Schuh, Günther, 251–261, Apprimus Wissenschaftsverlag
Ausprägungen von Industrie 4.0 im Mittelstand: Zusammenhänge zwischen der Morphologie von Produktionsbereichen und der Einsetzbarkeit von Industrie-4.0-Methoden
Liebrecht, C.; Krodel, T.; Stricker, N.; Lanza, G.
2019. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (6), 398–403. doi:10.3139/104.112096
28th CIRP Design Conference 2018
Laroche, F.; Bernard, A. (Eds.)
2018. Elsevier
Multi-criteria Evaluation of Manufacturing Systems 4.0 under Uncertainty
Liebrecht, C.; Jacob, A.; Kuhnle, A.; Lanza, G.
2017. (M. M. Tseng, H.-Y. Tsai & Y. Wang, Eds.) Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems Hrsg.: Tseng, Mitchell M.; Tsai, Hung-Yin; Wang, Yue, 63, 224–229. doi:10.1016/j.procir.2017.03.147
Shopfloor-getriebene Einführung von Industrie 4.0: Ein Bottom-up-Ansatz zur Reifegradbewertung für Industrie 4.0-Anwendungen
Liebrecht, C.; Buergin, J.; Benterbusch, J.; Kiefer, C.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (7-8), 539–543
Amplification of Supply Chain Performance Measurement Systems by Sustainability Key Performance Indicators
Lemmerer, C.; Schieder, P.; Biegler, C.; Arndt, T.; Lanza, G.; Sihn, W.
2016. Management of Technology - Step to Sustainable Production (MOTSP) 2016. International Conference Management of Technology – Step to Sustainable Production: MOTSP 2016, 1 Jun 2016 - 3 Jun 2016, Porec, Kroatien, 182–189, Elsevier
6th CIRP Conference on Learning Factories (CLF) 2016
Martinsen, K. (Ed.)
2016. Elsevier
Prozesskette zur flexiblen Herstellung leichter Tragwerkstrukturen: Steigerung der Qualität und Zuverlässigkeit
Munzinger, C.; Lanza, G.; Elser, J.; Ruch, D.; Schneider, M.; Koehler, G.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 442–449
A Portfolio Theory Approach to Identify Risk-efficient Enablers of Change in Global Production Networks
Moser, E.; Huss, A. K.; Liebrecht, C.; Lanza, G.
2017. (M. M. Tseng, H.-Y. Tsai & Y. Wang, Eds.) Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems Hrsg.: Tseng, Mitchell M.; Tsai, Hung-Yin; Wang, Yue, 63, 768–773. doi:10.1016/j.procir.2017.03.273
Plattformbasiertes Geschäfts-modell für rekonfigurierbare Produktionsanlagen im Leichtbau
Moll, P.; Jacob, A.; Schäfer, M.; Coutandin, S.; Fleischer, J.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (9), 580–583. doi:10.3139/104.111961
7th Conference on Learning Factories (CLF) 2017
Metternich, J.; Glass, R. (Eds.)
2017. Elsevier
Queue Length Forecasting in Complex Manufacturing Job Shops
May, M. C.; Albers, A.; Fischer, M. D.; Mayerhofer, F.; Schäfer, L.; Lanza, G.
2021. Forecasting, 2021 (2), 322–338. doi:10.3390/forecast3020021
CIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering
2014. (L. Laperrière & G. Reinhart, Eds.), Springer Verlag. doi:10.1007/978-3-642-20617-7
Gestaltung verteilter Entwicklungsnetzwerke: Ein Konfigurationsansatz mit Hilfe von Business Capabilities
Lanza, G.; Ude, J.; Deuringer, A.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (7-8), 560–565
Integrated evaluation of value added networks‐a concept incorporating dynamics, uncertainty and multi-dimensional target systems
Lanza, G.; Ude, J.
2009. 42nd CIRP Conference on Manufacturing Systems, 3rd -5th June 2009, Grenoble, France
A Concept for the Configuration of Value Added Networks Based on Quality Capabilities During Ramp-Up
Lanza, G.; Ude, J.
2007. P. F. Cunha & P. G. Maropoulos (Eds.), Digital enterprise technology : perspectives and future challenges : [papers accepted and presented at the 3. CIRP sponsored International Conference in Digital Enterprise Technology (DET ’06) held in Setubal, Portugal, in September 2006] / ed. by Pedro F. Cunha; Paul G. Maropoulos, 393–400, Springer
Innovative product-services for robust global supply chains - a viewpoint
Lanza, G.; Stricker, N.; Stoll, J.
2013. Disruptive supply network models in future industrial systems : configuring for resilience and sustainability ; 17th Cambridge International Manufacturing Symposium 19 and 20 September, Cambridge ; symposium proceedings, 386–400, University of Cambridge
Life Cycle Performance als wesentliches Qualitätsmerkmal von Investitionsgütern
Lanza, G.; Werner, P.; Niggeschmidt, S.
2009. Erfolgsfaktor Qualität - 20 Jahre FQS: 11. FQS-Forschungstagung 2009; 21. Oktober 2009, Frankfurt am Main, 134–144, FQS Forschungsgemeinschaft
Flexible production lines for series production of automotive electric drives
Lanza, G.; Stoll, J.; Koelmel, A.; Peters, S.
2012. 2nd International Electric Drives Production Conference (E|DPC) 2012, 15th -18th October 2012, Nuremberg, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2012.6425088
Quality Assurance in the Production of Semi-Finished SMC and BMC
Lanza, G.; Stockey, S.; Ertel, A.
2011. S.-W. Kim (Ed.), The 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2011) : [held at KAIST, Daejeon, South Korea, on 29 June - 2 July 2011] / [Ed.. Seung-Woo Kim], 211, Institute of Physics Publishing Ltd (IOP Publishing Ltd)
Improved Calculation of Weibull distributions for deficient industrial data in the context of Life Cycle Costs
Lanza, G.; Stengele, G.; Stricker, N.
2012. 10th Global Conference on Sustainable Manufacturing (GCSM) 2012, 31st October - 2nd November 2012, 225–231
Quality Assurance of Micro Gears via Three-Dimensional Surface Characterization
Lanza, G.; Viering, B.
2009. M. Giordano (Ed.), 11th CIRP International Conference on Computer Aided Tolerancing, March 26th - 27th 2009, Annecy. Ed.: Max Giordano, 1–5
Proposal of a Cylindrical Standard to Evaluate the Uncertainty of Measurement for Micro Gear Measurements
Lanza, G.; Viering, B.
2010. 10th International Symposium on Measurement and Quality Control (ISMQC 2010) : Osaka, Japan, 5 - 9 September 2010 / [organized by: The Japan Society for Precision Engineering (JSPE), 254–257, Curran
Adapted reliability prediction by integrating mechanical load impacts
Lanza, G.; Werner, P.; Niggeschmidt, S.
2009. Annual Reliability and Maintainability Symposium (RAMS) 2009, 83–88, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2009.4914655
Warranty cost improvement of machine tools during the bidding process and operation
Lanza, G.; Werner, P.; Behmann, B.; Appel, D.
2011. Proceedings - Annual Reliability and Maintainability Symposium 2011. Hrsg.: IEEE, 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2011.5754512
Prognosis of machine tool warranty costs considering arising risks through weak data sets and unknown load profiles
Lanza, G.; Werner, P.; Behmann, B.
2010. E. Safety & R. Association (Eds.), European Safety and Reliability Annual Conference: Reliability, Risk and Safety: Back to the Future (ESREL) 2010 Hrsg.: Safety, European; Association, Reliability, 1014–1018, CRC Press-Taylor & Francis Group
Increased trustability of reliability prognoses for machine tools
Lanza, G.; Werner, P.; Appel, D.; Behmann, B.
2011. Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011, 225–228, Springer. doi:10.1007/978-3-642-19692-8_39
Quantification of Risks Arising from Low Data Availability in Extended Warranty and Preventive Maintenance
Lanza, G.; Werner, P.
2010. Symposium proceedings - International Applied Reliability Symposium Euorpe 2010, 2–6
Statistical Method for the Estimation of Operational Conditions in Mixed Failure Data of Production Equipment
Lanza, G.; Werner, P.
2009. Symposium proceedings - International Applied Reliability Symposium 2009, 25th - 27th March 2009, 2–11
Design for low-cost country sourcing: motivation, basic principles and design guidelines
Lanza, G.; Weiler, S.; Vogt, S.
2009. R. Roy & E. Shehab (Eds.), 19th CIRP Design Conference - Competitive Design 2009 Hrsg.: Roy, Rajkumar; Shehab, Essam, 229–236, Cranfield Univ. Press
Valuation of the development of low-cost country suppliers
Lanza, G.; Weiler, S.; Stoehr, A.
2009. Sustainable development of manufacturing systems : 42nd CIRP Conference on Manufacturing Systems, 3rd - 5th June 2009 Grenoble, 3–5
Use of the real options analysis to valuate new supplier development - a South Korean case study
Lanza, G.; Weiler, S.; Möhlmann, J.
2010. W. Sihn & P. Kuhlang (Eds.), Proceedings / 43rd International Conference on Manufacturing Systems, 26 - 28 May 2010, [Vienna] . Eds.: Wilfried Sihn; Peter Kuhlang, 137–144, Neuer Wissenschaftlicher Verlag (NWV)
Procurement Structures for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.; Mall, P.
2010. 20th Annual North American Research and Teaching Symposium on Purchasing and Supply Chain Management 2010, 1–11
Product design for global production
Lanza, G.; Weiler, S.
2010. A. Bernard (Ed.), Global product development : proceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th - 21st April 2010. Ed.: Alain Bernard, 403–412, Springer
Selection of Procurement Objects for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.
2009. 18th IPSERA Conference 2009, 5th - 8th April 2009 Wiesbaden, 1229–1245
Effektive Auswahl und Qualifizierung eines chinesischen Lieferanten
Lanza, G.; Weiler, S.
2008. VDMA-Nachrichten, 1–34
Conception of a Methodology for a Comprehensive Procurement Market Selection for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.
2008. Y. Shi, J. Srai & M. Gregory (Eds.), Global value chains - capturing value in international manufacturing and supply networks : the 13th Annual International Manufacturing Symposium , 25th - 26th September 2008, Cambridge ; symposium proceedings (2008). Hrsg.: Shi, Yongjiang; Srai, Jag; Gregory, Mike, 1–23, University of Cambridge, Institute for Manufacturing
Messunsicherheit als bedeutende Größe in der Mikroproduktion
Lanza, G.; Viering, B.; Kippenbrock, K.; Stockey, S.
2010. wt Werkstattstechnik online, 100 (11/12), 875–879
Digitaler Zwilling des Produktionssystems : Lernende, adaptive Ablaufsimulation für größtmögliche Realitätsnähe
Overbeck, L.; Brützel, O.; Stricker, N.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (Special), 62–65. doi:10.3139/104.112326
Early evaluation of manufacturing costs within an integrative design of product and production system
Nordsiek, D.; Gausemeier, J.; Lanza, G.; Peters, S.
2010. M. Garetti, M. Taisch, S. Cavalieri, S. Terzi & M. Tucci (Eds.), Proceedings of the APMS 2010 International Conference on Advances in Production Management Systems Hrsg.: Garetti, Marco; Taisch, Marco; Cavalieri, Sergio; Terzi, Sergio; Tucci, Mario, Ciemme S.p.A
Integrating green and sustainability aspects into life cycle performance evaluation
Niggeschmidt, S.; Helu, M.; Diaz-Elsayed, N.; Behmann, B.; Lanza, G.; Dornfeld, D.
2010. H.-C. Zhang, Z. Liu & G. Liu (Eds.), Conference proceedings / LCE 2010, 17th CIRP International Conference on Life Cycle Engineering Hrsg.: Zhang, Hong-Chao; Liu, Zhifeng; Liu, Guangfu, 366–371, Hefei University of Technology Press
Entwicklungsstrukturen intrinsischer Hybride: Von der Entwicklung über die Produkton zur Schadenscharakterisierung
Pohl, M.; Stommel, M.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.
2017. wt Werkstattstechnik online, 107 (7-8), 546–550
Uncertainty Evaluation of Pore Analysis for Additively Manufactured Parts using Cross Sections
Schild, L.; Fülling, M.; Haefner, B.; Lanza, G.
2019. 9th Conference on Industrial Computed Tomography (iCT) 2019, 13-15 Feb, Padova, Italy, 1–8, NDT.net
Data Fusion for Quality Assurance of fibre-reinforced plastic
Schäferling, M.; Berger, D.; Haefner, B.; Lanza, G.
2018. International Symposium on Structural Health Monitoring and Nondestructive Testing 2018 Hrsg.: htw saar | University of Applied Sciences, 1–9, NDT.net
10th CIRP Conference on Industrial Product-Service Systems, IPS2 2018, 29-31 May 2018, Linköping, Sweden
Sakao, T.; Lindahl, M.; Liu, Y.; Dalhammar, C. (Eds.)
2018. Elsevier B.V
Assessment of Dynamics and Risks in Supplier Selection Processes
Ruhrmann, S.; Hochdoerffer, J.; Lanza, G.
2014. Procedia CIRP, 25, 2–9. doi:10.1016/j.procir.2014.10.003
A methodological approach to evaluate supplier development based on real options
Ruhrmann, S.; Hochdörffer, J.; Lanza, G.
2014. Production Engineering - Research and Development, 8 (3), 373–382. doi:10.1007/s11740-014-0529-z
Site Selection Processes in Global Production Networks
Verhaelen, B.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Ed.: T. Friedli, 101–115, Springer. doi:10.1007/978-3-030-72740-6_7
26th CIRP Design Conference 2016
Wang, L.; Kjellberg, T. (Eds.)
2016. Curran
Challenges and Potentials of Digital Twins and Industry 4.0 in Product Design and Production for High Performance Products
Wagner, R.; Schleich, B.; Haefner, B.; Kuhnle, A.; Wartzack, S.; Lanza, G.
2019. (G. D. Putnik, Ed.) Procedia CIRP, 84, 88–93. doi:10.1016/j.procir.2019.04.219
Optimising Matching Strategies for High Precision Products by Functional Models and Machine Learning Algorithms
Wagner, R.; Kuhnle, A.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017. Hrsg: Robert Schmitt, 231–239, Apprimus Wissenschaftsverlag
Reaktion auf Störungen globaler Produktionsanläufe : Methodik zur Erhöhung der Effizienz von Produktionsanläufen in globalen Produktionsnetzwerken
Verhaelen, B.; Kehm, F.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 492–496. doi:10.3139/104.112377
Scalable and flexible production ramp-up in global production networks - a strategic network approach
Verhaelen, B.; Haefner, B.; Lanza, G.
2019. Operations Adding Value to Society: 26th EurOMA Conference Proceedings. Ed.: G. Kovács, 317–326
International Conference on Gears 2015
Prozessgestaltung, V.-G. P.-. und (Ed.)
2015. VDI Verlag
51st CIRP Conference on Manufacturing Systems
Wang, L. (Ed.)
2018. Elsevier B.V
8th International Conference on Enterprise Interoperability 2016
Zelm, M.; Doumeingts, G.; Mendonça, J. P. (Eds.)
2016. ISTE
Informationsfusion für die vollständige Qualitätssicherung von faserverstärkten Kunststoffen
Zaiß, M.; Haefner, B.; Lanza, G.
2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Hrsg.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 173–184, VDI Verlag
A Method for Improving Production Management Training by Integrating an Industry 4.0 Innovation Center in China
Yang, S.; Hamann, K.; Haefner, B.; Wu, C.; Lanza, G.
2018. Procedia manufacturing, 23, 213–218. doi:10.1016/j.promfg.2018.04.019
The 2019 World Manufacturing Forum Report: Skills for the Future of Manufacturing
Taisch, M.; Casidsid, M. L.; Despeisse, M.; Luglietti, R.; May, G.; Morin, T. R.; Pinzone, M.; Wuest, T. (Eds.)
2019. World Manufacturing Foundation
International Conference on Manufacturing of Lightweight Components - ManuLight 2014 : Dortmund, Germany, 3 - 4 April 2014
Tekkaya, A. E.; Baier, H.; Biermann, D.; Fleischer, J.; Lanza, G.; Schulze, V.; Zäh, M. F.; Selvaggio, A. (Eds.)
2014. Curran
The 24th CIRP Conference on Life Cycle Engineering
Takata, S.; Umeda, Y.; Kondoh, S. (Eds.)
2017. Elsevier
Framework of Robustness: The Concept of Robustness in Production Systems
Stricker, N.; Moser, E.; Lanza, G.
2016. Enterprise Interoperability in the Digitized and Networked Factory of the Future. Hrsg.: M. Zelm, 395–401, International Society for Technology in Education
An Approach towards Improving the Robustness of Production Systems
Stricker, N.; Lanza, G.
2014. Advanced Materials Research, 1018, 461–468. doi:10.4028/www.scientific.net/AMR.1018.461
Solving multi-criteria problems under risk: an approach explained using the example of rescheduling in dynamic environments
Stricker, N.; Kopf, R.; Lanza, G.
2014. Production Engineering - Research and Development, 8 (4), 535–541. doi:10.1007/s11740-014-0556-9
9th Conference on Industrial Computed Tomography (iCT) 2019, 13-15 Feb, Padova, Italy
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2019. NDT.net
Data Analytics for Manufacturing Systems – A Data-Driven Approach for Process Optimization
Ungermann, F.; Kuhnle, A.; Stricker, N.; Lanza, G.
2019. Procedia CIRP, 81, 369–374. doi:10.1016/j.procir.2019.03.064
Die Zukunft der Kennzahlensysteme: Unternehmenssteuerung durch ein ganzheitliches KPI-Netzwerk auf Basis eines Digital Twins
Ungermann, F.; Jacob, A.; Verhaelen, B.; Itterheim, A.; Park, Y.-B.; Stricker, N.; Lanza, G.
2019. Industrie 4.0 Management, 35 (5), 25–29
Workforce Flexibility in Production Networks: Mid-Term Capacity Planning Illustrated by an Example of the Automotive Industry
Treber, S.; Moser, E.; Lanza, G.
2016. 6. WGP Congress 2016 Hrsg.: Wulfsberg, Jens P.; Fette, Marc; Montag, Tobias, 1140, 427–434. doi:10.4028/www.scientific.net/AMR.1140.427
Practice-oriented methodology for reallocating production technologies to production locations in global production networks
Treber, S.; Moser, E.; Helming, S.; Haefner, B.; Lanza, G.
2019. Production Engineering - Research and Development, 13 (3-4), 283–291. doi:10.1007/s11740-019-00876-5
Planen mit PlanQ: Das Forschungsprojekt PlanQ soll das Qualitätsmanagement automobiler Lieferketten verbessern
Treber, S.; Lanza, G.
2019. BVL Magazin - Das Magazin der Bundesvereinigung Logistik, 2019 (1), 34–35
Performance evaluation of production systems in the early stage of the product development
Lanza, G.; Rühl, J.
2009. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV) 2009, Munich, Germany, October 5th-7th, 2009 Hrsg.: M. F. Zaeh, 961–972, utzverlag
Die Produktion im Jahr 2025 - ein Zukunftsbild
Lanza, G.; Peters, S.; Arndt, T.; Haefner, B.; Stricker, N.
2014. Industrie 4.0 Management, 6, 64–66
Produktionstechnik: Enabler der Elektromobilität
Lanza, G.; Peters, S.
2011. Tagungsband VDMA Tagung: Elektromobilität und die Montage- und Handhabungstechnik
Dynamic Optimization of Manufacturing Systems to Minimize Life Cycle Costs
Lanza, G.; Peters, S.
2011. N. Duffie (Ed.), Proceedings of the 44th CIRP Conference on Manufacturing Systems (ICMS 2011); Madison, Wisconsin, June 1-3, 2011. Ed.: N. Duffie, Elsevier
Produktionstechnik für zukünftige Automobile
Lanza, G.; Peters, S.
2010. Konferenzband zum 1. Technologietag der e-mobil BW 2010, 25.11.2010, Stuttgart, 1–25
Experience-based user support system for the measurement of micro-mechanical parts
Lanza, G.; Peters, J.; Kippenbrock, K.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2010, 31st May - 4th June 2010. Ed.: H. Spaan ..., 100–103, European Society for Precision Engineering and Nanotechnology (euspen)
Werkstückeinfluss bei der Auswertung in der Koordinatenmesstechnik
Lanza, G.; Peters, J.
2010. tm - Technisches Messen, 77 (05), 276–282. doi:10.1524/teme.2010.0991
Evaluation of probing errors based on a point cloud analysis in coordinate metrology
Lanza, G.; Peters, J.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Ed.: H. Van Brussel, 203–206, European Society for Precision Engineering and Nanotechnology (euspen)
Challenges and user support in micro coordinate metrology
Lanza, G.; Peters, J.
2008. 1st International F25 User Meeting
Optimization of Production Ramp-Up by using a Simulation for Personnel Requirements Planning
Lanza, G.; Sauer, A.
2012. 24th European Modeling & Simulation Symposium 2012, 19th - 21st September 2012, Vienna, Austria. Ed.: Felix Breitenecker, 32–37, Curran
Chancen und Risiken des deutschen Maschinen- und Anlagenbaus in der chinesischen Automobilindustrie
Lanza, G.; Schuler, D.; Ender, T.; Peters, S.
2011. Karlsruher Institut für Technologie (KIT)
Transformation globaler Produktionsnetzwerke : Trends und Herausforderungen
Lanza, G.; Schuh, G.; Friedli, T.; Verhaelen, B.; Rodemann, N.; Remling, D.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 196–199. doi:10.3139/104.112262
Quality assurance for micro manufacturing processes and primary-shaped micro components
Lanza, G.; Schlipf, M.; Fleischer, J.
2008. Microsystem Technologies, 14 (12), 1823–1830. doi:10.1007/s00542-008-0608-1
Mikroprozesskettengerechte Qualitätssicherung: Statistische Prozessregelung und Qualitätssicherung mikromechanischer Bauteile
Lanza, G.; Schlipf, M.; Kippenbrock, K.
2009. 4. Kolloquium Mikroproduktion : Fachbeiträge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009 / SFB 747; SFB 516; SFB 499 Mikrourformen; SFB 440. Hrsg.: F. Vollertsen, 133–142, Verlag BIAS
Innovative quality assurance strategies for the characterization of dimensional features of micromechanical components
Lanza, G.; Schlipf, M.; Kippenbrock, K.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: Volker Saile, 187–190, Cardiff University. doi:10.1243/17547164C0012009034
Simulation of personnel requirements during production ramp-up
Lanza, G.; Sauer, A.
2012. Production Engineering - Research and Development, 6 (4-5), 395–402. doi:10.1007/s11740-012-0394-6
Ramp-Up Optimization by Process Simulation
Lanza, G.; Sauer, A.
2011. Proceedings 1st International Conference on Ramp-Up Management 2011, WZLforum gGmbH
Prediction of Functionality and Long-term Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Deigendesch, T.; Enkler, H. G.; Leslabay, P.; Oerding, J.; Viering, B.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology : May 18th - May 22nd 2008, Zürich, Switzerland. Ed.: H. Van Brussel, 270–274, European Society for Precision Engineering and Nanotechnology (euspen)
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. A. Weckenmann (Ed.), Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen Hrsg.: Weckenmann, Albert, 5–18, Shaker Verlag
Global Manufacturing Management : From Excellent Plants Toward Network Optimization
Friedli, T.; Lanza, G.; Remling, D. (Eds.)
2021. Springer Nature Switzerland. doi:10.1007/978-3-030-72740-6
Proceedings of the Design Society: DESIGN Conference
The Design Society (Ed.)
2020. Cambridge University Press (CUP). doi:10.1017/dsd.2020.344
Simulation von qualitätskritischen Geschäftsprozessen im Produktionsanlauf
Fleischer, J.; Lanza, G.; Ender, T.
2005. 1. Karlsruher Simulationssymposium 2005, 1–20
OEE Simulation in Production Ramp-up
Fleischer, J.; Lanza, G.; Ender, T.
2005. 3rd International Industrial Simulation Conference 2005: ISC 2005 ; June 9 - 11, 2005, Berlin, Germany. Ed.: J. Krüger, 173–178
A time-variant quality prognosis ramp-up simulation model
Fleischer, J.; Lanza, G.; Ender, T.
2005. Proceedings of International PACE Forum Digital Manufacturing 2005, 1–4
Mit hoher Flexibilität und Genauigkeit: Automatisierte Kleinserienmontage von Rahmenstrukturen
Fleischer, J.; Lanza, G.; Elser, J.; Otter, M.
2011. VDI-Z Integrierte Produktion, 153 (9), 99–101
Fixtureless Alignment of Joining Partners within the Assembly of Aluminum Space Frame Structures
Fleischer, J.; Lanza, G.; Dosch, S.; Elser, J.; Pangboonyanon, W.
2014. Procedia CIRP, 18, 221–225. doi:10.1016/j.procir.2014.06.135
Changeability and flexibility of assembly line balancing as a multi-objective optimization problem
Fisel, J.; Exner, Y.; Stricker, N.; Lanza, G.
2019. Journal of Manufacturing Systems, 53, 150–158. doi:10.1016/j.jmsy.2019.09.012
Variant flexibility in assembly line balancing under the premise of feasibility robustness
Fisel, J.; Exner, Y.; Stricker, N.; Lanza, G.
2018. Procedia CIRP, 72, 774–779. doi:10.1016/j.procir.2018.03.049
Changeability Focused Planning Method for Multi Model Assembly Systems in Automotive Industry
Fisel, J.; Arslan, A.; Lanza, G.
2017. M. M. Tseng, H.-Y. Tsai & Y. Wang (Eds.), Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems. Hrsg.: Mitchell M. Tseng, 515–520, Elsevier. doi:10.1016/j.procir.2017.03.148
Model based Control of Surface Quality with regard to Micro Cutting Processes
Fleischer, J.; Lanza, G.; Kotschenreuther, J.; Deuchert, M.; Schlipf, M.; Smiljkovic, S.
2008. G. Byrne & G. OʾDonnell (Eds.), 3rd International Conference High Performance Cutting (HPC) : Dublin, Ireland, June 12 - 13th, 2008. Chairmen: Gerry Byrne, 775–784, University College Dublin
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen Hrsg.: A. E. Tekkaya, 339–362, VDI Verlag
Capability-Oriented Configuration of Global Value Added Networks
Fleischer, J.; Lanza, G.; Ude, J.; Sternemann, K.; Herm, M.; Homann, T.
2007. Proceedings: 12th Annual Cambridge International Manufacturing Symposium 2007 ; 28 September 2007, Cambridge, UK, 40–53
Process parameter analysis on surface roughness and process forces in micro cutting
Fleischer, J.; Lanza, G.; Schlipf, M.; Kotschenreuther, J.; Peters, J.
2006. W. Menz (Ed.), 4M 2006: Second International Conference on Multi-Material Micro Manufacture: 20–22 September 2006, Grenoble, France. Ed.: W. Menz, 289–292, Elsevier. doi:10.1016/B978-008045263-0/50065-9
Statistical quality control in micro-manufacturing through multivariate μ-EWMA chart
Fleischer, J.; Lanza, G.; Schlipf, M.
2008. CIRP Annals-Manufacturing Technology, 57 (1), 521–524. doi:10.1016/j.cirp.2008.03.113
Statistical Quality Assurance in High Precision Engineering
Fleischer, J.; Lanza, G.; Schlipf, M.
2006. H. Zervos (Ed.), Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 430–433, European Society for Precision Engineering and Nanotechnology (euspen)
Application of statistical resampling techniques on CMM point clouds
Fleischer, J.; Lanza, G.; Peters, J.; Viering, B.
2008. H. Brussel (Ed.), 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2008. Hrsg.: Hendrik Brussel, 280–284, European Society for Precision Engineering and Nanotechnology (euspen)
Quantified interdependencies between lean methods and production figures in the small series production
Fleischer, J.; Lanza, G.; Peter, K.
2008. M. Mitsuishi, K. Ueda & F. Kimura (Eds.), Manufacturing Systems and Technologies for the New Frontier. Ed.: Mitsuishi, Mamoru; Ueda, Kanji; Kimura, Fumihiko, 89–92, Springer. doi:10.1007/978-1-84800-267-8_17
Small Batch Assembly of Space-Frame-Structures with Production Related Deviations of Individual Components
Fleischer, J.; Lanza, G.; Otter, M.; Pangboonyanon, W.
2014. Procedia CIRP, 18, 226–231. doi:10.1016/j.procir.2014.06.136
Development of an acoustic process monitoring system for selective laser melting (SLM)
Eschner, N.; Weiser, L.; Haefner, B.; Lanza, G.
2020. Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Ed.: Laboratory for Freeform Fabrication, University of Texas at Austin, 2097–2117, Elsevier
Technology-based Product-services for Supporting Frugal Innovation
Colledani, M.; Silipo, L.; Yemane, A.; Lanza, G.; Buergin, J.; Hochdoerffer, J.; Georgoulias, K.; Mourtzis, D.; Bitte, F.; Bernard, A.; Belkadi, F.
2016. Procedia CIRP, 47, 126–131. doi:10.1016/j.procir.2016.03.093
CIRP Winter Meetings 2018
CIRP - The International Academy for Production Engineering (Ed.)
2018
63rd General Assemly of CIRP 2013: Copenhagen, Denmark - August 18-24, 2013
The International Academy for Production Engineering (Ed.)
2013. Elsevier Science
Prozessüberwachung beim Laser-Strahlschmelzen mit akustischen Signalen
Eschner, N.; Lingenhöhl, J.; Oeppling, S.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (11-12), 818–823
Efficient ablation strategies and quality assurance for structuring big surfaces by an ultra-short-pulse laser
Chlipala, M.; Stockey, S.; Hirtler, M.; Schulze, V.; Lanza, G.
2014. Proceedings of the 14th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - 6th, 2014, Dubrovnik, Croatia. Ed.: R. Leach, 170–173, European Society for Precision Engineering and Nanotechnology (euspen)
8th IPSS Conference on Product-Service Systems Across Life Cycle 2016
Cavalieri, S.; Ceretti, E.; Tolio, T.; Pezzotta, G. (Eds.)
2016. Curran
Technology based industrial product-services supporting robustness in manufacturing systems
Colledani, M.; Silipo, L.; Yemane, A.; Lanza, G.; Stricker, N.; Ziprani, F.; Fogliazza, G.
2016. IFAC-PapersOnLine, 49 (12), 53–58. doi:10.1016/j.ifacol.2016.07.549
Design and management of manufacturing systems for production quality
Colledani, M.; Tolio, T.; Fischer, A.; Iung, B.; Lanza, G.; Schmitt, R.; Váncza, J.
2014. CIRP Annals-Manufacturing Technology, 63 (2), 773–796. doi:10.1016/j.cirp.2014.05.002
Kombination etablierter und additiver Fertigung – Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskett
Eschner, N.; Kopf, R.; Lieneke, T.; Künneke, T.; Berger, D.; Häfner, B.; Lanza, G.; Zimmer, D.
2017. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (7-8), 469–472. doi:10.3139/104.111751
Dünnwandige Leichtmetallteile präzise bearbeiten: Vergleich zweier Maschinenkonzepte für die Bearbeitung von Leichtmetallstrangpressprofilen
Engbert, T.; Biermann, D.; Zabel, A.; Otter, M.; Munzinger, C.; Lanza, G.
2010. technica, 59 (9), 22–24
Maschinelles Lernen in der PPS: Konzept für den Einsatz von maschinellem Lernen für eine Matrix-Produktion
Echsler Minguillon, F.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (9), 630–634
Introducing Scenario Planning to manage Supply Chains in an uncertain environment
Daum, C.; Moser, R.; Book, J.; Lanza, G.; Fleet, D.
2012. Capturing value in international manufacturing and supply networks: new models for a changing world. Ed.: J. Singh, 17 S., Institute for Manufacturing
Life cycle performance in manufacturing = Life Cycle Performance in der Produktionstechnik: Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7/8), 513–517
Process Quality Improvements in Global Production Networks
Silbernagel, R.; Arndt, T.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Management for Professionals. Ed.: T. Friedli, 167–177, Springer. doi:10.1007/978-3-030-72740-6_12
Qualitätsregelstrategien in Wertschöpfungsnetzwerken: Strategien zur datenbasierten Qualitätsregelung kollaborativer Wertschöpfungsnetzwerke
Silbernagel, R.; Wagner, R.; Haefner, B.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (11-12), 802–806
Kollaboration in globalen Wertschöpfungsnetzwerken : Datenbasierte Regelung kollaborativer Wertschöpfungsnetzwerke mittels geschützter Transparenz
Silbernagel, R.; Stamer, F.; Häfner, B.; Linzbach, J.; Lanza, G.
2019. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (5), 314–317. doi:10.3139/104.112085
The 23rd CIRP Conference on Life Cycle Engineering
Seliger, G.; Krüger, J. (Eds.)
2016. Elsevier
7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017
Schmitt, R.; Schuh, G. (Eds.)
2017. Apprimus Wissenschaftsverlag
Process chain for the flexible production of curved extrusion profiles
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.; Gerbracht, T.; Koehler, G.; Ochs, A.; Schneider, M.
2009. 2nd International Researchers Symposium on Innovative Production Machines and Systems 2009. Ed.: R. Neugebauer, 1–6
Scalable assembly for fuel cell production
Staehr, T.; Ungermann, F.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017. Hrsg.: Robert Schmitt, 303–311, Apprimus Wissenschaftsverlag
Throughput analysis and simulation-based improvement of baked varnish stacking for automotive electric drives
Stoll, J.; Kemper, B.; Lanza, G.
2014. 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984407
Systematische Untersuchung alternativer Technologien zur Blechpaketherstellung
Stoll, J.; Bauer, S.; Lanza, G.
2014. Chancen und Herausforderungen der Elektromobilität - zu Lande, zu Wasser und in der Luft : E-MOTIVE : 6. Expertenforum Elektrische Fahrzeugantriebe : 15. und 16. Mai 2014 in Wolfsburg, 1, Forschungsvereinigung Antriebstechnik e. V. (FVA)
An integrated approach for developing production strategy and digital business model in global production
Steier, G. L.; Peukert, S.; Lanza, G.
2021. Production at the Leading Edge of Technology. Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Ed.: B.-A. Behrens, 666–674, Springer. doi:10.1007/978-3-030-78424-9_73
Safety, reliability and risk analysis: beyond the horizon: Proceedings of the European Safety and Reliability Conference, ESREL 2013, Amsterdam, The Netherlands, 29 September-2 October 2013
Steenbergen, R. D. J. M.; Gelder, P. van; Miraglia, S.; Vrouwenvelder, A. C. W. M. T. (Eds.)
2013. CRC Press-Taylor & Francis Group
Optimization in Manufacturing
Stecca, G.; Lanza, G.; Peters, S.
2014. L. Laperrière & G. Reinhart (Eds.), CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 929–932, Springer. doi:10.1007/978-3-642-20617-76565
Framework for Smart Services as a premise for collaboration in the era of manufacturing services = Framework für Smart Services als Grundlage für Kollaboration im Kontext aufkommender industrieller Dienstleistungen
Stamer, F.; Labbouz, A.; Haefner, B.; Lanza, G.
2019. Production at the leading edge of technology : Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Ed.: J. P. Wulfsberg, 603–612, Springer Vieweg. doi:10.1007/978-3-662-60417-5_60
Ausfallanalyse von Werkzeugmaschinen: Total Cost of Ownership 2.0 in Bezug auf den Anwendungsfall
Staehr, T.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (7-8), 507–510
Geschäftsprozesse mit generischen Petri-Netzen: Verteilte Modellierung, Simulation und Steuerung
Spath, D.; Lanza, G.; Herm, M.; Verspohl, F.; Hofer, H.
2002. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 97 (9), 448–452. doi:10.3139/104.100567
Influence of different mounting strategies on the random measurement error in industrial computed tomography
Schild, L.; Jung, M.; Häfner, B.; Lanza, G.
2020. 10th Conference on Industrial Computed Tomography (iCT) 2020, 4-7 Feb, Wels, Austria, 1–8
Knowledge Based User Support for Computed Tomography Measurements
Schild, L.; Haefner, B.; Lanza, G.
2018. Advances in Production Research. Ed.: R. Schmitt, 667–678, Springer. doi:10.1007/978-3-030-03451-1_65
Effects of future mobility on automotive production
Peters, S.; Lanza, G.; Stockey, S.
2012. Proceedings - 12th Stuttgart International Symposium Automotive and Engine Technology 2012, 13th -14th March 2012, Stuttgart, Germany, 457–466, ATZlive
Automotive manufacturing technologies – an international viewpoint
Peters, S.; Lanza, G.; Ni, J.; Xiaoning, J.; Pei-Yun, Y.; Colledani, M.
2014. Manufacturing Review, 1 (10), 1–12. doi:10.1051/mfreview/2014010
Produktionstechnik - Empfehlungen und Entwicklungstendenzen
Peters, S.; Lanza, G.
2012. eNOVA-Workshop Elektromobilität in den Städten der Zukunft, 26. Juni 2012, Berlin, 1–26, eNOVA Strategiekreis Elektromobilität
Influence of surface roughness on measurement uncertainty in Computed Tomography
Schild, L.; Kraemer, A.; Reiling, D.; Wu, H.; Lanza, G.
2018. 8th Conference on Industrial Computed Tomography (iCT) 2018. Ed.:, 1–8
Continuous Validation and Updating for High Accuracy of Digital Twins of Production Systems
Overbeck, L.; Le Louarn, A.; Brützel, O.; Stricker, N.; Lanza, G.
2021. Simulation in Produktion und Logistik 2021, Erlangen, 15.-17.September 2021. Hrsg.: J. Franke, 609–617, Cuvillier Verlag
Successful Collaboration in Global Production Networks - fair, secured, connected
Silbernagel, R.; Stamer, F.; Sautter, B.
2022, April 1. (G. Lanza, Ed.), wbk Institut für Produktionstechnik
Blazed grating enables highly decoupled optically variable devices fabricated by vibration-assisted diamond texturing
Wang, J.; Wang, Y.; Zhang, J.; Schulze, V.; Guo, P.
2022. Optics Express, 30 (6), 8829–8846. doi:10.1364/OE.450628
Hybrid material additive manufacturing: interlocking interfaces for fused filament fabrication on laser powder bed fusion substrates
Englert, L.; Heuer, A.; Engelskirchen, M. K.; Frölich, F.; Dietrich, S.; Liebig, W. V.; Kärger, L.; Schulze, V.
2022. Virtual and Physical Prototyping, 17 (3), 508–527. doi:10.1080/17452759.2022.2048228
Challenges and Potential Solutions for Reduced Unbalance of Permanent Magnet Rotors for Electric Traction Motors
Wößner, W.; Heim, M.; Walter, M.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684227
Metamodeling of Numerical Simulations for Optimization of Hairpin Bending Processes
Wirth, F.; Hausmann, L.; Eppler, A.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684203
Influence of Wire Layer Structures on the Thermal Behavior in Electrical Machine Slots
Halwas, M.; Hoffmann, F.; Bader, P.; Heyde, T.; Doppelbauer, M.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684217
Final Report Sino-German Industry 4.0 Factory Automation Platform
Albers, A.; Ovtcharova, J.; Becker, J.; Lanza, G.; Zhang, W.; Zhang, T.; Qiao, F.; Ma, Y.; Wang, J.; Wu, Z.; Ehrmann, C.; Gönnheimer, P.; Behrendt, M.; Mandel, C.; Stürmlinger, T.; Klippert, M.; Kimmig, A.; Schade, F.; Yang, S.; Heider, I.; Xie, S.; Song, K.; Peng, J.; Goncalves, P.; Kampfmann, R.; Schlechtendahl, J.; Kattner, J.; Straub, C.; May, M.; Zhu, Z.; Bai, O.; Lin, Y.; Yang, Z.; Ding, L.; Rossol, A.-S.
2022. (J. Fleischer, Ed.), Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143693
Erfolgreiche Kollaboration in Produktionsnetzwerken - fair, sicher, vernetzt
Silbernagel, R.; Stamer, F.
2022, March 15. (G. Lanza & C. Weinhardt, Eds.), wbk Institut für Produktionstechnik
Ontology-Based Production Simulation with OntologySim
May, M. C.; Kiefer, L.; Kuhnle, A.; Lanza, G.
2022. Applied Sciences (Switzerland), 12 (3), Art.-Nr.: 1608. doi:10.3390/app12031608
Recommender Systems for Capability Matchmaking
Badewitz, W.; Stamer, F.; Linzbach, J.; Dann, D.; Weinhardt, C.; Lichtenberger, S.
2021. 2021 IEEE 23rd Conference on Business Informatics: CBI 2021 ; Virtual Conference, 1–3 September 2021 ; Volume 2 – CBI Forum and Workshop Papers. Ed.: J. P. A. Almeida, 87–96, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CBI52690.2021.10059
Balancing the trade-off between measurement uncertainty and measurement time in optical metrology using design of experiments, meta-modelling and convex programming
Gauder, D.; Gölz, J.; Biehler, M.; Diener, M.; Lanza, G.
2021. CIRP journal of manufacturing science and technology, 35, 209–216. doi:10.1016/j.cirpj.2021.06.016
In-process acoustic pore detection in milling using deep learning
Gauder, D.; Biehler, M.; Gölz, J.; Schulze, V.; Lanza, G.
2022. CIRP Journal of Manufacturing Science and Technology, 37, 125–133. doi:10.1016/j.cirpj.2022.01.008
Industrial machine tool component surface defect dataset
Schlagenhauf, T.; Landwehr, M.
2021. Data in Brief, 39, Art.-Nr. 107643. doi:10.1016/j.dib.2021.107643
Towards Ontology-based Autonomous Intralogistics for Agile Remanufacturing Production Systems
Klein, J.-F.; Wurster, M.; Stricker, N.; Lanza, G.; Furmans, K.
2021. Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA): Västerås, Sweden – Online , 07-10 September, 2021, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA45728.2021.9613486
Analysis of Basis Weight Uniformity Indexes for the Evaluation of Fiber Injection Molded Nonwoven Preforms
Moll, P.; Wang, S.; Coutandin, S.; Fleischer, J.
2020. AUTEX research journal, 21 (3), 341–351. doi:10.2478/aut-2020-0039
Modelling of the temperature distribution of spot-weldable composite/metal joints
Roth, S.; Nieschlag, J.; Mehner, M.; Coutandin, S.; Fleischer, J.
2021. Journal of Advanced Joining Processes, 4, Art.-Nr.: 100066. doi:10.1016/j.jajp.2021.100066
Wertstromkinematik – Produktionssysteme neu gedacht: Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 2)
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207
Modelling and condition-based control of a flexible and hybrid disassembly system with manual and autonomous workstations using reinforcement learning
Wurster, M.; Michel, M.; May, M. C.; Kuhnle, A.; Stricker, N.; Lanza, G.
2022. Journal of Intelligent Manufacturing, 33 (2), 575–591. doi:10.1007/s10845-021-01863-3
Material parameter optimization for orthogonal cutting simulations of AISI4140 at various tempering conditions
Stampfer, B.; González, G.; Segebade, E.; Gerstenmeyer, M.; Schulze, V.
2021. 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, June 15-17, 2021. Ed.: E. Govekar, 198–203, Elsevier. doi:10.1016/j.procir.2021.09.034
Chip segmentation frequency based strategy for tool condition monitoring during turning of Ti-6Al-4V
González, G.; Schwär, D.; Segebade, E.; Heizmann, M.; Zanger, F.
2021. 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, June 15-17, 2021. Ed.: E. Govekar, 276–280, Elsevier. doi:10.1016/j.procir.2021.09.047
Concept for modelling the influence of electrode corrugation after calendering on stacking accuracy in battery cell production
Mayer, D.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 744–749, Elsevier. doi:10.1016/j.procir.2021.11.125
Comprehensive machine data acquisition through intelligent parameter identification and assignment
Gönnheimer, P.; Karle, A.; Mohr, L.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 720–725, Elsevier. doi:10.1016/j.procir.2021.11.121
A Framework for Digital Twins for Production Network Management
Benfer, M.; Peukert, S.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1269–1274, Elsevier. doi:10.1016/j.procir.2021.11.213
Continuous adaption through real data analysis turn simulation models into digital twins
Overbeck, L.; Brützel, O.; Teufel, M.; Stricker, N.; Kuhnle, A.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 98–103, Elsevier. doi:10.1016/j.procir.2021.11.017
Genetic algorithm for the optimization of vision acquisition for on-the-fly position measurement of individual layers in fuel cell stack assembly
Schäfer, J.; Allmendinger, S.; Hofmann, J.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1407–1411, Elsevier. doi:10.1016/j.procir.2021.11.237
Design and implementation of a holistic framework for data integration in industrial machine and sensor networks
Hillenbrand, J.; Gönnheimer, P.; Gerlitz, E.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1771–1776, Elsevier. doi:10.1016/j.procir.2021.11.298
Data-Based Supply Chain Collaboration - Improving Product Quality in Global Production Networks by Sharing Information
Silbernagel, R.; Wagner, C.; Albers, A.; Trapp, T.-U.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 470–475, Elsevier. doi:10.1016/j.procir.2021.11.079
Potentials of Traceability Systems - A Cross-Industry Perspective
Gartner, P.; Benfer, M.; Kuhnle, A.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 987–992, Elsevier. doi:10.1016/j.procir.2021.11.166
Torque-Time series
Mangold, S.; Gerlitz, E.; Zimprich, S.
2021, December 27. doi:10.5445/IR/1000141534
Digitalization of Battery Manufacturing: Current Status, Challenges, and Opportunities
Ayerbe, E.; Berecibar, M.; Clark, S.; Franco, A. A.; Ruhland, J.
2022. Advanced Energy Materials, 12 (17), Art. Nr.: 2102696. doi:10.1002/aenm.202102696
Konzept eines systemischen Entwicklungsprozesses zur Hebung von Leichtbaupotenzialen = Concept of a Systemic Development Process to Realize Lightweight Potentials
Scholz, J.; Kaspar, J.; Quirin, S.; Kneidl, B.; Kleiner, S.; Friedmann, M.; Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.
2021. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 116 (11), 797–800. doi:10.1515/zwf-2021-0182
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M.; Edström, K.; Ayerbe, E.; Berecibar, M.; Bhowmik, A.; Castelli, I. E.; Clark, S.; Dominko, R.; Erakca, M.; Franco, A. A.; Grimaud, A.; Horstmann, B.; Latz, A.; Lorrmann, H.; Meeus, M.; Narayan, R.; Pammer, F.; Ruhland, J.; Stein, H.; Vegge, T.; Weil, M.
2022. Advanced Energy Materials, 12 (17), 2102904. doi:10.1002/aenm.202102904
Wertstromkinematik – Produktionssysteme neu gedacht – Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 1)
Mühlbeier, E.; Oexle, F.; Gönnheimer, P.; Fleischer, J.; Ye, X.; Hohmann, S.; Mamaev, I.; Bertram, T.; Bryg, M.; Kotschenreuther, J.; Kipfmüller, M.; Bremer, F.; Matthiesen, S.; Arndt, T.; Schulze, V.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (11), 847–851. doi:10.1515/zwf-2021-0179
Pbf-lb process-induced regular cavities for lightweight alsi10mg structures
Lubkowitz, V.; Alber, J.; Zanger, F.
2021. Materials, 14 (21), 6665. doi:10.3390/ma14216665
Manufacturing Genome: A Foundation for Symbiotic, Highly Iterative Product and Production Adaptations
Gartner, P.; Jacob, A.; Akay, H.; Löffler, J.; Gammack, J.; Lanza, G.; Kim, S.-G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 35–46, Springer. doi:10.1007/978-3-030-90700-6_3
Development of a Human-Centered Implementation Strategy for Industry 4.0 Exemplified by Digital Shopfloor Management
Kandler, M.; May, M. C.; Kurtz, J.; Kuhnle, A.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 738–745, Springer. doi:10.1007/978-3-030-90700-6_84
Adaptive Manufacturing Based on Active Sampling for Multi-component Individual Assembly
Frey, A. M.; Lanza, G.
2022. B. T. D. L. M. S. S. N. K. N. A. K. S. Andersen A.-L. Andersen R. (Ed.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 372–380, Springer. doi:10.1007/978-3-030-90700-6_42
A Data-Driven Approach for Option-Specific Order Freeze Points in Mass-Customized Production
Dürr, S.; Silbernagel, R.; Bartsch, H.; Steier, G. L.; Huber, M. F.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 620–627, Springer. doi:10.1007/978-3-030-90700-6_70
Automated Production Network Planning Under Uncertainty by Developing Representative Demand Scenarios
Bruetzel, O.; Voelkle, D.; Overbeck, L.; Stricker, N.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 459–466, Springer. doi:10.1007/978-3-030-90700-6_52
Investigation of the mechanical behavior of electrodes after calendering and its influence on singulation and cell performance
Mayer, D.; Wurba, A.-K.; Bold, B.; Bernecker, J.; Smith, A.; Fleischer, J.
2021. Processes, 9 (11), Art.Nr. 2009. doi:10.3390/pr9112009
Influence of lpbf process parameters on milling of a maraging tool steel
Neuenfeldt, M.; Zanger, F.; Schulze, V.
2021. MM Science Journal, 2021 (November), 5030–5037. doi:10.17973/MMSJ.2021_11_2021148
Intelligent vision based wear forecasting on surfaces of machine tool elements
Schlagenhauf, T.; Burghardt, N.
2021. SN Applied Sciences, 3 (12), Art.-Nr. 858. doi:10.1007/s42452-021-04839-3
Experimental and numerical analysis of mold filling in rotational molding
Nieschlag, J.; Seuffert, J.; Strack, D.; Friedmann, M.; Kärger, L.; Henning, F.; Fleischer, J.
2021. Journal of Composites Science, 5 (11), 289. doi:10.3390/jcs5110289
Towards planning and control in cognitive factories - A generic model including learning effects and knowledge transfer across system entities
Wurster, M.; Exner, Y.; Kaiser, J.-P.; Stricker, N.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 158–163, Elsevier. doi:10.1016/j.procir.2021.10.025
Multi-variate time-series for time constraint adherence prediction in complex job shops
May, M. C.; Behnen, L.; Holzer, A.; Kuhnle, A.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 55–60, Elsevier. doi:10.1016/j.procir.2021.10.008
Framework for simulation-based Trajectory Planning and Execution of Robots equipped with a Laser Scanner for Measurement and Inspection
Kaiser, J.-P.; Becker, S. N.; Wurster, M.; Stricker, N.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 292–297, Elsevier. doi:10.1016/j.procir.2021.10.047
Reinforcement Learning Based Production Control of Semi-automated Manufacturing Systems
Overbeck, L.; Hugues, A.; May, M. C.; Kuhnle, A.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 170–175, Elsevier. doi:10.1016/j.procir.2021.10.027
Development of a Parallel Product-Production Co-design for an Agile Battery Cell Production System
Ruhland, J.; Storz, T.; Kößler, F.; Ebel, A.; Sawodny, J.; Hillenbrand, J.; Gönnheimer, P.; Overbeck, L.; Lanza, G.; Hagen, M.; Tübke, J.; Gandert, J.; Paarmann, S.; Wetzel, T.; Mohacsi, J.; Altvater, A.; Spiegel, S.; Klemens, J.; Scharfer, P.; Schabel, W.; Nowoseltschenko, K.; Müller-Welt, P.; Bause, K.; Albers, A.; Schall, D.; Grün, T.; Hiller, M.; Schmidt, A.; Weber, A.; Biasi, L. de; Ehrenberg, H.; Fleischer, J.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Hrsg.: Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 96–104, Springer International Publishing. doi:10.1007/978-3-030-90700-6_10
Evaluation of a Hypervisor-Based Smart Controller for Industry 4.0 Functions in Manufacturing
Schade, F.; Barton, D.; Fleischer, J.; Becker, J.
2021. 7th IEEE World Forum on Internet of Things (WF-IoT), 680–685, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WF-IoT51360.2021.9595534
Assembly techniques for proton exchange membrane fuel cell stack: A literature review
Song, K.; Wang, Y.; Ding, Y.; Xu, H.; Mueller-Welt, P.; Stuermlinger, T.; Bause, K.; Ehrmann, C.; Weinmann, H. W.; Schaefer, J.; Fleischer, J.; Zhu, K.; Weihard, F.; Trostmann, M.; Schwartze, M.; Albers, A.
2022. Renewable & sustainable energy reviews, 153, Art.-Nr.: 111777. doi:10.1016/j.rser.2021.111777
Seamless and modular architecture for autonomous machine tools
Fleischer, J.; Puchta, A.; Gönnheimer, P.
2021. Journal of Machine Engineering, 21 (3), 40–46. doi:10.36897/jme/141565
Configuration and optimization of migration planning in global production networks
Moser, E.; Verhaelen, B.; Haefner, B.; Lanza, G.
2021. CIRP Journal of Manufacturing Science and Technology, 35, 803–818. doi:10.1016/j.cirpj.2021.07.007
Industrie 4.0 im Remanufacturing : Analyse und Bewertung aktueller Forschungsansätze
Sprenger, K.; Klein, J.-F.; Wurster, M.; Stricker, N.; Lanza, G.; Furmans, K.
2021. Industrie 4.0 Management, 2021 (4), 37–40. doi:10.30844/I40M_21-4_S37-40
Numerical design of rotationally molded composite tie rods
Nieschlag, J.; Eisenhardt, P.; Coutandin, S.; Fleischer, J.
2021. Composite Structures, 278, Art.-Nr.: 114687. doi:10.1016/j.compstruct.2021.114687
Schätzung der Segmentspanbildungsfrequenz mithilfe von Körperschallsignalen
Diaz Ocampo, D.; Gonzalez, G.; Zanger, F.; Heizmann, M.
2021. Technisches Messen, 88 (S1), S37–S41. doi:10.1515/teme-2021-0059
Explainable reinforcement learning in production control of job shop manufacturing system
Kuhnle, A.; May, M. C.; Schäfer, L.; Lanza, G.
2022. International Journal of Production Research, 60 (19), 5812–5834. doi:10.1080/00207543.2021.1972179
The present state of surface conditioning in cutting and grinding
Stampfer, B.; González, G.; Gerstenmeyer, M.; Schulze, V.
2021. Journal of Manufacturing and Materials Processing, 5 (3), 92. doi:10.3390/JMMP5030092
Demand-supply matching through auctioning for the circular economy
Bodin, U.; Dhanrajani, S.; Abdalla, A. H.; Diani, M.; Klenk, F.; Colledani, M.; Palm, E.; Schelén, O.
2021. Procedia manufacturing, 54, 82–87. doi:10.1016/j.promfg.2021.07.013
Unsupervised detection of state changes during operation of machine elements
Hillenbrand, J.; Fleischer, J.
2021. Journal of Machine Engineering, 21 (2), 35–46. doi:10.36897/jme/136311
Improvement of the adhesion in functional NiTi wire/polymer composites made by additive manufacturing
Eyer, P.; Dittus, J.; Trauth, A.; Coutandin, S.; Fleischer, J.; Weidenmann, K. A.
2021. Composite Structures, 275, Art.-Nr.: 114455. doi:10.1016/j.compstruct.2021.114455
Dual-Laser PBF-LB Processing of a High-Performance Maraging Tool Steel FeNiCoMoVTiAl
Graf, G.; Nouri, N.; Dietrich, S.; Zanger, F.; Schulze, V.
2021. Materials, 14 (15), Art.-Nr.: 4251. doi:10.3390/ma14154251
Interfirm Collaboration in Global Production Networks – Maturity Model for Managing Interfirm Relationships
Silbernagel, R.; Gese, S.; Krupa, C.; Lanza, G.
2021. 28th EurOMA Conference, July 5 - 7, 2021. Book of Proceedings
A stitching algorithm for automated surface inspection of rotationally symmetric components
Schlagenhauf, T.; Brander, T.; Fleischer, J.
2021. CIRP Journal of Manufacturing Science and Technology, 35, 169–177. doi:10.1016/j.cirpj.2021.05.013
Decision-making autonomy of production plants in global production networks – Analysis of the interplay between strategy and decisions [in press]
Verhaelen, B.; Lanza, G.
2021. 28th EurOMA Conference : 5 - 7 July 2021 : Online : Managing the "new normal": The future of Operations and Supply Chain Management in unprecedented times. Ed.: C. Blome, University of Sussex
Self-reference dispersion correction for chromatic confocal displacement measurement
Bai, J.; Li, X.; Wang, X.; Wang, J.; Ni, K.; Zhou, Q.
2021. Optics and lasers in engineering, 140, Art.Nr. 106540. doi:10.1016/j.optlaseng.2021.106540
Foresighted digital twin for situational agent selection in production control
May, M. C.; Overbeck, L.; Wurster, M.; Kuhnle, A.; Lanza, G.
2021. Procedia CIRP, 99, 27–32. doi:10.1016/j.procir.2021.03.005
Data analytics for time constraint adherence prediction in a semiconductor manufacturing use-case
May, M. C.; Maucher, S.; Holzer, A.; Kuhnle, A.; Lanza, G.
2021. Procedia CIRP, 100, 49–54. doi:10.1016/j.procir.2021.05.008
Production-oriented design of electric traction drives with hairpin winding
Fleischer, J.; Hausmann, L.; Wirth, F.
2021. Procedia CIRP, 100, 169–174. doi:10.1016/j.procir.2021.05.080
Decision support for the implementation of Industry 4.0 methods: Toolbox, Assessment and Implementation Sequences for Industry 4.0
Liebrecht, C.; Kandler, M.; Lang, M.; Schaumann, S.; Stricker, N.; Wuest, T.; Lanza, G.
2021. Journal of manufacturing systems, 58, 412–430. doi:10.1016/j.jmsy.2020.12.008
Robust optimization of information flows in global production networks using multi-method simulation and surrogate modelling
Treber, S.; Benfer, M.; Häfner, B.; Wang, L.; Lanza, G.
2021. CIRP journal of manufacturing science and technology, 32, 491–506. doi:10.1016/j.cirpj.2020.08.012
Approach for integrated product variant allocation and configuration adaption of global production networks featuring post-optimality analysis
Hochdörffer, J.; Klenk, F.; Fusen, T.; Häfner, B.; Lanza, G.
2022. International journal of production research, 60 (7), 2168–2192. doi:10.1080/00207543.2021.1884765
Industrializing precast productions
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.; Stindt, J.
2021. Civil engineering design, 3 (3), 87–98. doi:10.1002/cend.202100019
Local foliation of manifolds by surfaces of willmore type
Lamm, T.; Metzger, J.; Schulze, F.
2020. Annales de l’Institut Fourier, 70 (4), 1639–1662. doi:10.5802/AIF.3375
AI-Based knowledge extraction for automatic design proposals using design-related patterns
Krahe, C.; Kalaidov, M.; Doellken, M.; Gwosch, T.; Kuhnle, A.; Lanza, G.; Matthiesen, S.
2021. Procedia CIRP, 100, 397–402. doi:10.1016/j.procir.2021.05.093
Image segmentation and robust edge detection for collision avoidance in machine tools
Barton, D.; Hess, F.; Männle, P.; Odendahl, S.; Stautner, M.; Fleischer, J.
2021. Technisches Messen, 88 (6), 374–385. doi:10.1515/teme-2021-0028
Automated calibration of a lightweight robot using machine vision
Barton, D.; Schwab, J.; Fleischer, J.
2017. 7. WGP-Jahreskongress Aachen, 5.–6. Oktober 2017. Hrsg.: R.H. Schmitt, 321–328, Apprimus Wissenschaftsverlag
SecurePLUGandWORK – Abschlussbericht
Schleipen, M.; Henßen, R.; Bischoff, T.; Pfrommer, J.; Sauer, O.; Schneider, D.; Jungbluth, F.; Flatt, H.; Barton, D.; Fleischer, J.; Bollhöfer, E.; Moll, C.; Lindauer, J.; Davis, R.; Baron, H.; Danner, T.; Hillerich, T.; Schmuck, C.; Blume, M.; Finster, S.; Fechner, A.; Tschepat, R.; Kazakov, D.; Kühbauch, R.; Klöblen, W.; Sproll, D.; Fellhauer, B.; Osswald, D.
2017. doi:10.5445/IR/1000133278
Development of an alternative Round Wire Process Chain: Automated Trickle Winding
Sell-Le Blanc, F.; Weise, L.; Klusmann, B.; Luttge, W.; Dunker, A.; Lindhorst, N.; Halwas, M.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388202
Review and Enhancements of Rotor Designs for High Speed Synchronous Reluctance Machines
Hausmann, L.; Waldhof, M.; Fischer, J.; Wößner, W.; Oliveira Flammer, M.; Heim, M.; Fleischer, J.; Parspour, N.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388205
New Production Techniques for Electric Motors in High Performance Lightweight Applications
Ruhland, P.; Matveev, A.; Nielsen, K.; Kvinnesland, K.; Coutandin, S.; Fleischer, J.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388183
Opportunities of Model-Based Production-Oriented Design of Stators with Hairpin Winding
Hausmann, L.; Wirth, F.; Fleischer, J.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388186
Offline-online pattern recognition for enabling time series anomaly detection on older nc machine tools
Netzer, M.; Palenga, Y.; Goennheimer, P.; Fleischer, J.
2021. Journal of Machine Engineering, 21 (1), 98–108. doi:10.36897/jme/132248
Concepts and Requirements for Flexible Disassembly Systems for Drive Train Components of Electric Vehicles
Fleischer, J.; Gerlitz, E.; Rieß, S.; Coutandin, S.; Hofmann, J.
2021. The 28th CIRP Conference on Life Cycle Engineering, March 10 – 12, 2021, Jaipur, India. Ed.: K. S. Sangwan, 577–582, Elsevier. doi:10.1016/j.procir.2021.01.154
A comprehensive KPI network for the performance measurement and management in global production networks
Verhaelen, B.; Mayer, F.; Peukert, S.; Lanza, G.
2021. Production engineering, 15 (5), 635 – 650. doi:10.1007/s11740-021-01041-7
Reinforcement learning for opportunistic maintenance optimization
Kuhnle, A.; Jakubik, J.; Lanza, G.
2019. Production Engineering, 13 (1), 33–41. doi:10.1007/s11740-018-0855-7
A novel intelligent fault diagnosis method of rolling bearing based on two-stream feature fusion convolutional neural network
Xue, F.; Zhang, W.; Xue, F.; Li, D.; Xie, S.; Fleischer, J.
2021. Measurement: Journal of the International Measurement Confederation, 176, Art.-Nr.: 109226. doi:10.1016/j.measurement.2021.109226
Methodology for the strategy-oriented distribution of decision autonomy in global production networks
Verhaelen, B.; Haefner, B.; Lanza, G.
2021. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 15–20, Elsevier. doi:10.1016/j.procir.2021.01.045
Analysis of the Variety of Lithium-Ion Battery Modules and the Challenges for an Agile Automated Disassembly System
Gerlitz, E.; Greifenstein, M.; Hofmann, J.; Fleischer, J.
2020. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 175–180, Elsevier. doi:10.1016/j.procir.2021.01.071
Deriving Collaboration Cases in Production Networks Considering Smart Services
Stamer, F.; Bizenberger, P.; Häfner, B.; Lanza, G.
2020. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 33–38, Elsevier. doi:10.1016/j.procir.2021.01.048
Fluid Automation - A Definition and an Application in Remanufacturing Production Systems
Wurster, M.; Häfner, B.; Gauder, D.; Stricker, N.; Lanza, G.
2020. 8th CIRP Conference of Assembly Technology and Systems. Ed.: S. Makris, 508–513, Elsevier. doi:10.1016/j.procir.2020.05.267
Vom Handwerk zur individualisierten Serienfertigung – Schwerpunkt adaptive Modulbauweisen mit Fließfertigungsmethoden
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.
2021. Bautechnik, 98 (3), 243–256. doi:10.1002/bate.202000110
Intelligent Anomaly Detection of Machine Tools based on Mean Shift Clustering
Netzer, M.; Michelberger, J.; Fleischer, J.
2020. Procedia CIRP, 93, 1448–1453. doi:10.1016/j.procir.2020.03.043
Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V
Pang, Y.; Feng, P.; Wang, J.; Zha, H.; Xu, J.
2021. International Journal of Advanced Manufacturing Technology, 89. doi:10.1007/s00170-021-06682-7
Digital DNA in quality control cycles of high-precision products
Wagner, R.; Haefner, B.; Biehler, M.; Lanza, G.
2020. CIRP annals, manufacturing technology, 69 (1), 373–376. doi:10.1016/j.cirp.2020.03.020
Surface conditioning in machining processes – Glossary of the DFG priority programme 2086
Schulze, V.; Zanger, F.; Stampfer, B.; Seewig, J.; Uebel, J.; Zabel, A.; Wolter, B.; Böttger, D.
2020. Technisches Messen, 87 (11), 661–673. doi:10.1515/teme-2020-0044
Optical process monitoring for Laser-Powder Bed Fusion (L-PBF)
Zouhri, W.; Dantan, J. Y.; Häfner, B.; Eschner, N.; Homri, L.; Lanza, G.; Theile, O.; Schäfer, M.
2020. CIRP journal of manufacturing science and technology, 31, 607–617. doi:10.1016/j.cirpj.2020.09.001
Integrated Production and Logistics Planning and Control in Global Production Networks
Helming, S.; Buergin, J.; Bitte, F.; Haefner, B.; Lanza, G.
2019. Advances in Production Research. Ed.: R. Schmitt, 637–646, Springer Nature Switzerland. doi:10.1007/978-3-030-03451-1_62
Produktionsnetzwerke und Fabriktypen der Zukunft – Helfen Fabriktypen beim Aufbau neuer Standorte in Produktionsnetzwerken?
Lanza, G.; Häfner, B.; Verhaelen, B.; Peukert, S.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (12), 797–801. doi:10.3139/104.112196
Local order scheduling for mixed-model assembly lines in the aircraft manufacturing industry
Buergin, J.; Helming, S.; Andreas, J.; Blaettchen, P.; Schweizer, Y.; Bitte, F.; Haefner, B.; Lanza, G.
2018. Production Engineering, 12 (6), 759–767. doi:10.1007/s11740-018-0852-x
Development of a Structured Approach for Reactive Disruption Management in Supply Chain Networks - an Integrated Perspective
Helming, S.; Haverkamp, C.; Häfner, B.; Lanza, G.
2019. International Conference on Competitive Manufacturing (COMA 19) proceedings. Ed.: D. Dimitrov, 431–437
Decentralized Multi-Agent Production Control through Economic Model Bidding for Matrix Production Systems
May, M. C.; Kiefer, L.; Kuhnle, A.; Stricker, N.; Lanza, G.
2021. Procedia CIRP, 96, 3–8. doi:10.1016/j.procir.2021.01.043
Surface conditioning in machining processes
Schulze, V.
2020. Technisches Messen, 87 (12), 743–744. doi:10.1515/teme-2020-0071
Industrial Machine Tool Element Surface Defect Dataset
Schlagenhauf, T.; Landwehr, M.; Fleischer, J.
2021, February 11. doi:10.5445/IR/1000129520
Extraction of surface image features for wear detection on ball screw drive spindles
Schlagenhauf, T.; Heinzler, M.; Fleischer, J.
2020. Forum Bildverarbeitung 2020. Ed.: T. Längle ; M. Heizmann, 305–316, KIT Scientific Publishing
Influences of Design and Manufacturing on the Performance of Electric Traction Drives
Halwas, M.; Hausmann, L.; Wirth, F.; Fleischer, J.; Jux, B.; Doppelbauer, M.
2020. Proceedings 2020 International Conference on Electrical Machines (ICEM 2020), 23–26 August 2020, Gothenburg, Sweden., 488–494, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM49940.2020.9270899
CAD/CAM-Schnittstelle für die Wickeltechnik - Systematische Entwicklung und Validierung zur beschleunigten Inbetriebnahme
Hofmann, J.; Bolender, M.; Sun, P.; Sell-Le Blanc, F.; Köhn, H.; Fleischer, J.
2019. wt Werkstattstechnik online, 109 (7/8), 611–616
Systematic Investigation of the Grooving Process and its Influence on Slot Insulation of Stators with Hairpin Technology
Mayer, D.; Hausmann, L.; Maul, N.; Reinschmidt, L.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (EDPC), Article no: 9011935, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011935
Sensitivity Analysis and Validation of the Intelligent Assembly Process for Permanent Magnet Rotors with the Balancing Grade G 2.5
Wößner, W.; Uhl, E.; Hofmann, J.; Fleischer, J.
2020. 2019 9th International Electric Drives Production Conference (EDPC), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011834
Coherences Between Production Technology and Performance of Electric Traction Drives
Halwas, M.; Sell-Le Blanc, F.; Jux, B.; Doppelbauer, M.; Wirth, F.; Hausmann, L.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (E|DPC), Article no: 9011889, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011889
Feasibility Study for Enameled Round Copper Wire Compression within Slots of Electrical Machines
Sell-Le Blanc, F.; Halwas, M.; Jager, D.; Weisse, L.; Jovanoski, J.; Kehl, N.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (EDPC), 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9012030
Model-Based Assembly Optimization for Unbalance-Minimized Production Automation of Electric Motors
Wößner, W.; Peter, M.; Hofmann, J.; Fleischer, J.
2019. Advances in Production Research. Ed.: R. Schmitt, 551–562, Springer International Publishing
Ausbildungsfabrik Statorfertigung – Ein Beitrag zur Mitarbeiterqualifizierung im Kontext der Elektromobilität
Hausmann, L.; Wirth, F.; Franck, C.; Förderer, M.; Karrer, M.; Hofmann, J.; Fleischer, J.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (10), 621–626. doi:10.3139/104.112166
Unwucht hochausgenutzter Synchronmaschinen – Ein modellbasierter Ansatz zur Vermeidung ungewollter Unwuchtänderungen
Wößner, W.; Lorenz, M.; Hofmann, J.; Jux, B.; Langheck, A.; Doppelbauer, M.; Fleischer, J.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (7-8), 464–468. doi:10.3139/104.112127
Bahnzugkraftregelung in der Batteriezellfertigung, Web tension control in battery cell production
Weinmann, H. W.; Lang, F.; Hofmann, J.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7/8), 519–524
Self-Aware LiDAR Sensors in Autonomous Systems using a Convolutional Neural Network
Qu, J.; Barton, D.; Gönnheimer, P.; Pinsker, F.; Kufer, D.; Fleischer, J.
2020. Procedia manufacturing, 52, 50–55. doi:10.1016/j.promfg.2020.11.010
Identifying the influence of the particle size and morphology of electrode materials on the process of calendering
Wurba, A.
2020. International Battery Production Conference (IBPC 2020), Online, November 2–4, 2020
Batteriezellenfertigung vom Coil zum Stack: Integriert, automatisiert und dadurch hoch flexibel
Weinmann, H. W.; Eichelkraut, M.; Woke da Silva, L.; Fleischer, J.
2020. C2 Coating & Converting, (4), 21–24
Adjustement of cryogenic cooling in titanium machining by controlling the nitrogen flow
Stampfer, B.; Golda, P.; Zanger, F.; Schießl, R.; Maas, U.; Schulze, V.
2018. 68th CIRP General Assembly, International Academy for Production Engineering (2018), Tokyo, Japan, August 19–25, 2018
Integrated Gripping-system for Heating and Preforming of Thermoplastic Unidirectional Tape Laminates
Moll, P.; Ohlberg, L.; Salzer, S.; Coutandin, S.; Fleischer, J.
2019. Procedia CIRP, 85, 266–271. doi:10.1016/j.procir.2019.10.006
Deep Learning for Automated Product Design
Krahe, C.; Bräunche, A.; Jacob, A.; Stricker, N.; Lanza, G.
2020. Procedia CIRP, 91, 3–8. doi:10.1016/j.procir.2020.01.135
Ausfallfrüherkennung von Ritzel-Zahnstangen-Trieben mittels Acoustic Emission. PhD dissertation
Ehrman, C.
2020, December 18. Shaker Verlag
Coil2Stack: Ein innovatives Verfahren zur formatflexiblen Batteriezellherstellung
Weinmann, H. W.; Töpper, H.-C.; Fleischer, J.
2020. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 241–243. doi:10.3139/104.112192
Synergien zwischen Batterie- und Brennstoffzelle
Schäfer, J.; Weinmann, H. W.; Mayer, D.; Storz, T.; Hofmann, J.; Fleischer, J.
2020. wt Werkstattstechnik online
Development of a new model based servo-controlled wire tensile force control for stator winding applications
Hofmann, J.; Sell-Le Blanc, F.; Wößner, W.; Angiyan-Vishnuram, E.; Kohn, H.; Lepold, A.; Weber, T.; Schuttler, T.; Busch, P. A.; Fleischer, J.
2019. 9th International Electric Drives Production Conference (EDPC), Article no: 9011839, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011839
Investigations on the tensile force at the multi-wire needle winding process
Hofmann, J.; Bold, B.; Baum, C.; Fleischer, J.
2017. 7th International Electric Drives Production Conference (EDPC), Article no: 8328142, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2017.8328142
Shifting value stream patterns along the product lifecycle with digital twins
Schleich, B.; Dittrich, M.-A.; Clausmeyer, T.; Damgrave, R.; Erkoyuncu, J. A.; Haefner, B.; Lange, J. de; Plakhotnik, D.; Scheidel, W.; Wuest, T.
2019. Procedia CIRP, 86, 3–11. doi:10.1016/j.procir.2020.01.049
Concept for collision avoidance in machine tools based on geometric simulation and sensor data
Barton, D.; Männle, P.; Odendahl, S.; Stautner, M.; Fleischer, J.
2020. Forum Bildverarbeitung 2020 Längle, Thomas [Hrsg.]; Heizmann, Michael [Hrsg.], 171–182, KIT Scientific Publishing
Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics
Wang, T.; Li, N.; Link, G.; Jelonnek, J.; Fleischer, J.; Dittus, J.; Kupzik, D.
2021. Composites / A, 140, Article: 106181. doi:10.1016/j.compositesa.2020.106181
Influence of cutting parameters, tool coatings and friction on the process heat in cutting processes and phase transformations in workpiece surface layers∗
Schulze, V.; Michna, J.; Zanger, F.; Faltin, C.; Maas, U.; Schneider, J.
2013. HTM - journal of heat treatment and materials, 68 (1), 22–31. doi:10.3139/105.110177
Experimental determination of the cooling performance of liquid nitrogen for machining conditions
Golda, P.; Schießl, R.; Stampfer, B.; Schulze, V.; Maas, U.
2021. International journal of heat and mass transfer, 164, Art.-Nr.: 120588. doi:10.1016/j.ijheatmasstransfer.2020.120588
Digital process management for the integrated bending of thermoplastic CFRP tapes
Kupzik, D.; Ding, J.; Coutandin, S.; Fleischer, J.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3 2020, online, 514–519, Elsevier. doi:10.1016/j.procir.2020.04.061
Approach for developing implementation strategies for circular economy in global production networks
Klenk, F.; Gleich, K.; Meister, F.; Häfner, B.; Lanza, G.
2020. 27th CIRP Life Cycle Engineering (LCE) Conference, 13-15 May 2020, online. Ed.: D. Brissaud, 127–132, Elsevier. doi:10.1016/j.procir.2020.01.052
Using smart services as a key enabler for collaboration in global production networks
Stamer, F.; Steinke, M.; Silbernagel, R.; Häfner, B.; Lanza, G.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3, 2020, online, 730–735, Elsevier. doi:10.1016/j.procir.2020.04.065
Virtual In-line Inspection for Function Verification in Serial Production by means of Artificial Intelligence
Wagner, R.; Fischer, J.; Gauder, D.; Haefner, B.; Lanza, G.
2020. 16th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2020). Ed.: E. Morse, 63–68, Elsevier. doi:10.1016/j.procir.2020.03.126
Towards increasing robustness in global production networks by means of an integrated disruption management
Peukert, S.; Lohmann, J.; Haefner, B.; Lanza, G.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3, 2020, online, 706–711, Elsevier. doi:10.1016/j.procir.2020.03.009
Investigation of Parameters Influencing the Producibility of Anodes for Sodium-Ion Battery Cells
Hofmann, J.; Wurba, A.-K.; Bold, B.; Maliha, S.; Schollmeyer, P.; Fleischer, J.; Klemens, J.; Scharfer, P.; Schabel, W.
2021. Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 171–181, Springer. doi:10.1007/978-3-662-62138-7_18
Metal additive manufacturing of multi-material dental strut implants
Kain, M.; Nadimpalli, V. K.; Miqueo, A.; May, M. C.; Yagüe-Fabra, J. A.; Häfner, B.; Pedersen, D. B.; Calaon, M.; Tosello, G.
2020. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020. Ed.: R. K. Leach, 175–176, European Society for Precision Engineering and Nanotechnology (euspen)
Microstructural and Chemical Constitution of the Oxide Scale formed on a Pesting-Resistant Mo-Si-Ti Alloy
Obert, S.; Kauffmann, A.; Seils, S.; Boll, T.; Kauffmann-Weiss, S.; Chen, H.; Anton, R.; Heilmaier, M.
2021. Corrosion science, 178, Art.-Nr. 109081. doi:10.1016/j.corsci.2020.109081
Cryogenic orthogonal turning of Ti-6Al-4V – Analysis of nitrogen supply pressure variation and subcooler usage
Stampfer, B.; Golda, P.; Schießl, R.; Maas, U.; Schulze, V.
2020. The international journal of advanced manufacturing technology, 111 (1-2), 359–369. doi:10.1007/s00170-020-06105-z
Concept for Predicting Vibrations in Machine Tools Using Machine Learning
Barton, D.; Fleischer, J.
2021. Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 549–558, Springer. doi:10.1007/978-3-662-62138-7_55
Analyse von 3D-CT-Aufnahmen von Spänen zur Extrahierung der Segmentspanbildungsfrequenz
Schwär, D.; Kunz, A.; Dehen, S.; Zanger, F.; Puente León, F.
2020. Technisches Messen, 87 (s1), s22–s27. doi:10.1515/teme-2020-0039
Industrie-4.0-Nachrüstkit für Werkzeugmaschinen: Modulare Lösung für zustandsorientierte Instandhaltung und Prozessüberwachung
Barton, D.; Stamm, R.; Mergler, S.; Bardenhagen, C.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7-8), 491–495
Fiber orientation measurement of fiber injection molded nonwovens by image analysis
Moll, P.; Wang, S.; Coutandin, S.; Fleischer, J.
2021. Textile research journal, 91 (5-6), 664–680. doi:10.1177/0040517520948903
Vibration analysis of moving machine tool axes based on phase information in video data
Klee, B.; Flohr, L.; Parth, M.; Kleinert, M.; Fleischer, J.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 364–368, Elsevier. doi:10.1016/j.procir.2020.05.063
Analytical modeling of the winding trajectory of the multi-wire needle winding process
Hofmann, J.; Lepold, A.; Fleischer, J.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 497–502, Elsevier. doi:10.1016/j.procir.2020.05.086
Autonomous planning tool for changeable assembly systems
Staehr, T.; Stricker, N.; Lanza, G.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 104–109, Elsevier. doi:10.1016/j.procir.2020.05.019
Reinforcement learning for an intelligent and autonomous production control of complex job-shops under time constraints
Altenmüller, T.; Stüker, T.; Waschneck, B.; Kuhnle, A.; Lanza, G.
2020. Production engineering, 14 (3), 319–328. doi:10.1007/s11740-020-00967-8
Process model for the successful implementation and demonstration of SME-based industry 4.0 showcases in global production networks
Peukert, S.; Treber, S.; Balz, S.; Haefner, B.; Lanza, G.
2020. Production engineering, 14 (3), 275–288. doi:10.1007/s11740-020-00953-0
Designing an adaptive production control system using reinforcement learning
Kuhnle, A.; Kaiser, J.-P.; Theiß, F.; Stricker, N.; Lanza, G.
2021. Journal of intelligent manufacturing, 32, 855–876. doi:10.1007/s10845-020-01612-y
Investigations on intrinsically manufactured FRP/metal composites - from embedded inserts to load-bearing hybrid structures
Bernath, A.; Seuffert, J.; Muth, M.; Roth, S.; Fleischer, J.; Weidenmann, K. A.; Henning, F.
2020, April 29. 4th International Conference Hybrid - Materials and Structures (2020), Online, April 28–29, 2020
Effect of tool coatings on surface grain refinement in orthogonal cutting of AISI 4140 steel
González, G.; Plogmeyer, M.; Zanger, F.; Biehl, S.; Bräuer, G.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 176–180, Elsevier. doi:10.1016/j.procir.2020.02.113
Experimental identification of a surface integrity model for turning of AISI4140
Stampfer, B.; Böttger, D.; Gauder, D.; Zanger, F.; Häfner, B.; Straß, B.; Wolter, B.; Lanza, G.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 83–88, Elsevier. doi:10.1016/j.procir.2020.02.067
Complementary Machining: Effect of tool types on tool wear and surface integrity of AISI 4140
Schwalm, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 89–94, Elsevier. doi:10.1016/j.procir.2020.02.035
Milling parameter and tool wear dependent surface quality in micro-milling of brass
Dehen, S.; Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 95–100, Elsevier. doi:10.1016/j.procir.2020.02.024
Prädiktiv-reaktives Scheduling zur Steigerung der Robustheit in der Matrix-Produktion. PhD dissertation
Echsler Minguillon, F.
2020, July 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000121163
Qualitative Modelling in Embodiment Design - Investigating the Contact and Channel Approach Through Analysis of Projects
Grauberger, P.; Bremer, F.; Sturm, C.; Hoelz, K.; Wessels, H.; Gwosch, T.; Wagner, R.; Lanza, G.; Albers, A.; Matthiesen, S.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 897–906. doi:10.1017/dsd.2020.260
A Data-Driven Approach for Quality Analytics of Screwing Processes in a Global Learning Factory
Yang, S.; Liu, H.; Zhang, Y.; Arndt, T.; Hofmann, C.; Häfner, B.; Lanza, G.
2020. Procedia manufacturing, 45, 454–459. doi:10.1016/j.promfg.2020.04.052
5G and AI technology application in the AMTC learning factory
Zhang, W.; Cai, W.; Min, J.; Fleischer, J.; Ehrmann, C.; Prinz, C.; Kreimeier, D.
2020. Procedia manufacturing, 45, 66–71. doi:10.1016/j.promfg.2020.04.066
Machine learning based activity recognition to identify wasteful activities in production
Hofmann, C.; Patschkowski, C.; Häfner, B.; Lanza, G.
2020. Procedia manufacturing, 45, 171–176. doi:10.1016/j.promfg.2020.04.090
Robust predictive–reactive scheduling and its effect on machine disturbance mitigation
Echsler Minguillon, F.; Stricker, N.
2020. CIRP annals, manufacturing technology, 69 (1), 401–404. doi:10.1016/j.cirp.2020.03.019
Experimental investigation of frictional behavior in a filament winding process for joining fiber-reinforced profiles
Dackweiler, M.; Hagemann, L.; Coutandin, S.; Fleischer, J.
2019. Composite structures, 229, Art.-Nr. 111436. doi:10.1016/j.compstruct.2019.111436
Funktionsorientierte Qualitätssicherung von Mikrozahnrädern hinsichtlich des Geräuschverhaltens
Gauder, D.; Wagner, R.; Gölz, J.; Häfner, B.; Lanza, G.
2019. Technisches Messen, 86 (9), 469–477. doi:10.1515/teme-2019-0090
Chatter identification of thin-walled parts for intelligent manufacturing based on multi-signal processing
Li, D.-D.; Zhang, W.-M.; Li, Y.-S.; Xue, F.; Fleischer, J.
2021. Advances in manufacturing, 9, pages22–33. doi:10.1007/s40436-020-00299-x
Digitale Produktion und intelligente Steuerung
Marvin Carl May; Andreas Kuhnle; Gisela Lanza
2020. wt Werkstattstechnik online, 110 (4), 255–260
Akustische Prozessüberwachung für das Laserstrahlschmelzen (LBM) mit neuronalen Netzen: Eine Potentialbewertung
Eschner, N.; Weiser, L.; Häfner, B.; Lanza, G.
2019. Technisches Messen, 86 (11), 661–672. doi:10.1515/teme-2019-0070
A new approach for modelling the fibre path in bolted joints of continuous fibre reinforced composites
Roth, S.; Pracisnore, F.; Coutandin, S.; Fleischer, J.
2020. Composite Structures, 243, Article no: 112184. doi:10.1016/j.compstruct.2020.112184
Direct Bundle Simulation approach for the compression molding process of Sheet Molding Compound
Meyer, N.; Schöttl, L.; Bretz, L.; Hrymak, A. N.; Kärger, L.
2020. Composites / A, 132, Article: 105809. doi:10.1016/j.compositesa.2020.105809
Information reference architecture of turnkey project based on RAMI4.0
Xie, S.; Li, D.; Zhang, W.; Zhu, Z.; Fleischer, J.
2019. Jisuanji-jicheng-zhizao-xitong, 25 (12), 3081–3089. doi:10.13196/j.cims.2019.12.010
Multi-objective optimization of lean and resource efficient manufacturing systems
Greinacher, S.; Overbeck, L.; Kuhnle, A.; Krahe, C.; Lanza, G.
2020. Production engineering, 14, 165–176. doi:10.1007/s11740-019-00945-9
The influence of work hardening and residual stresses on the fatigue behavior of high frequency mechanical impact treated surface layers
Schubnell, J.; Pontner, P.; Wimpory, R. C.; Farajian, M.; Schulze, V.
2020. International journal of fatigue, 134, Article No.105450. doi:10.1016/j.ijfatigue.2019.105450
Metallurgical and material properties correlations between machined and severely plastic deformed aluminium alloy
Imbrogno, S.; Umbrello, D.; Schulze, V.; Zanger, F.; Segebade, E.
2019. International journal of material forming. doi:10.1007/s12289-019-01515-1
Microstructural investigation of deformation of Al folis in cathode current collectors during compression of electrode coatings
Kopp, A.; Niedermaier, J.; Bold, B.; Holl, K.; Bernthaler, T.; Schneider, G.
2019. International Battery Production Conference (IBPC 2019), Brunswick, Germany, November 4–6, 2019
Identifying the Impact of Calendering on Subsequent Processes Using a New Approach to Quality Assurance
Bold, B.; Weinmann, H.; Bernecker, J.; Fleischer, J.
2019. Advanced Battery Power (2019), Aachen, Germany, April 2–4, 2019
Automatisierte Demontage und zustandsorientiertes Remanufacturing von Lithium-Ionen Batteriemodulen
Fleischer, J.; Schäfer, J.
2019. 8. Ressourceneffizienz- und Kreislaufwirtschaftskongress Baden-Württemberg (KONGRESS BW 2019), Stuttgart, Germany, October 23–24, 2019
Challenges and solutions in automated disassembly and condition-based remanufacturing of lithium-ion battery modules for a circular economy
Schäfer, J.; Singer, R.; Hofmann, J.; Fleischer, J.
2019. Global Conference on Sustainable Manufacturing (GCSM 2019), Shanghai, China, October 9–11, 2019
In-line measurement of wrinkle formation and strains for NMC 622 cathodes while calendering
Bold, B.; Kopp, A.; Denk, N.; Schneider, G.; Fleischer, J.
2019. International Battery Production Conference (IBPC 2019), Brunswick, Germany, November 4–6, 2019
Manufacturing uncertainties and resulting robustness of optimized patch positions on continuous-discontinuous fiber reinforced polymer structures
Fengler, B.; Schäferling, M.; Schäfer, B.; Bretz, L.; Lanza, G.; Häfner, B.; Hrymak, A.; Kärger, L.
2019. Hospital physician, 213, 47–57. doi:10.1016/j.compstruct.2019.01.063
Thermografie zur Detektion von CFK-Schäden – Quantitativer Vergleich der Lock-in- und Puls-Phasen-Thermografie
Ekanayake, S.; Wiedbrauck, D.; Schäferling, M.; Häfner, B.; Schmitt, R. H.; Lanza, G.
2019. Technisches Messen, 86 (5), 285–296. doi:10.1515/teme-2018-0086
Process Simulation of Sheet Molding Compound (SMC) using Direct Bundle Simulation
Meyer, N.; Schöttl, L.; Bretz, L.; Hrymak, A.; Kärger, L.
2019, May 8. 12th International Conference on Composite Science and Technology (2019), Sorrento, Italy, May 8–10, 2019
Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K. A.; Fleischer, J.; Henning, F.
2018. Production engineering, 12 (2), 141–152. doi:10.1007/s11740-018-0829-9
Surface Engineering: Ressourceneffizienz für die Fertigung von Morgen - Leitfaden zur Ressourceneffizienz in der Produktion
Schulze, V.; Gerstenmeyer, M.; Segebade, E.; Langer, J.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000098958/v2
Methodical approach for the development of a platform for the configuration and operation of turnkey production systems
Gönnheimer, P.; Kimmig, A.; Mandel, C.; Stürmlinger, T.; Yang, S.; Schade, F.; Ehrmann, C.; Klee, B.; Behrendt, M.; Schlechtendahl, J.; Fischer, M.; Trautmann, K.; Fleischer, J.; Lanza, G.; Ovtcharova, J.; Becker, J.; Albers, A.
2019. Procedia CIRP, 84, 880–885. doi:10.1016/j.procir.2019.04.260
Numerical modelling of cutting forces in gear skiving
Vargas, B.; Zapf, M.; Klose, J.; Zanger, F.; Schulze, V.
2019. Procedia CIRP, 82, 455–460. doi:10.1016/j.procir.2019.04.039
Influence of anisotropy of additively manufactured AlSi10Mg parts on chip formation during orthogonal cutting
Segebade, E.; Gerstenmeyer, M.; Dietrich, S.; Zanger, F.; Schulze, V.
2019. Procedia CIRP, 82, 113–118. doi:10.1016/j.procir.2019.04.043
Thermomechanically coupled numerical simulation of cryogenic orthogonal cutting
Stampfer, B.; Golda, P.; Zanger, F.; Schießl, R.; Maas, U.; Schulze, V.
2019. Procedia CIRP, 82, 438–443. doi:10.1016/j.procir.2019.04.036
Modeling and optimization of winding paths to join lightweight profiles with continuous carbon fibers
Dackweiler, M.; Mayer, T.; Coutandin, S.; Fleischer, J.
2019. Production engineering, 13, 519–528. doi:10.1007/s11740-019-00914-2
Quality Control in the Production Process of SMC Lightweight Material
Kraemer, A.; Lin, S.; Brabandt, D.; Böhlke, T.; Lanza, G.
2014. Procedia CIRP, 17, 772–777. doi:10.1016/j.procir.2014.01.138
A new process route for the manufacturing of highly formed fiber-metal-laminates with elastomer interlayers (FMEL)
Roth, S.; Stoll, M. M.; Weidenmann, K. A.; Coutandin, S.; Fleischer, J.
2019. The international journal of advanced manufacturing technology, 104 (1-4), 1293–1301. doi:10.1007/s00170-019-04103-4
五轴加工奇异问题分析与非线性误差控制 = Singularity analysis and non-linear error control of five-axis machining
Li, D.; Zhang, W.; Sui, H.; Jin, X.; Shang, T.; Fleischer, J.
2019. Jisuanji-jicheng-zhizao-xitong, 25 (5), 1112–1118. doi:10.13196/j.cims.2019.05.009
Acoustic emission-based characterization of focal position during ultra-short pulse laser ablation
Kacaras, A.; Bächle, M.; Schwabe, M.; Zanger, F.; Puente León, F.; Schulze, V.
2019. Procedia CIRP, 81, 270–275. doi:10.1016/j.procir.2019.03.047
Modular smart controller for Industry 4.0 functions in machine tools
Barton, D.; Gönnheimer, P.; Schade, F.; Ehrmann, C.; Becker, J.; Fleischer, J.
2019. Procedia CIRP, 81, 1331–1336. doi:10.1016/j.procir.2019.04.022
Global production networks: Design and operation
Lanza, G.; Ferdows, K.; Kara, S.; Mourtzis, D.; Schuh, G.; Váncza, J.; Wang, L.; Wiendahl, H.-P.
2019. CIRP annals, manufacturing technology, 68 (2), 823–841. doi:10.1016/j.cirp.2019.05.008
Edge Formation in High-Speed Intermittent Slot-Die Coating of Disruptively Stacked Thick Battery Electrodes
Diehm, R.; Weinmann, H.; Kumberg, J.; Schmitt, M.; Fleischer, J.; Scharfer, P.; Schabel, W.
2019. Energy technology, 8 (2), Art. Nr.: 1900137. doi:10.1002/ente.201900137
Development of a training concept for leadership 4.0 in production environments
Helming, S.; Ungermann, F.; Hierath, N.; Stricker, N.; Lanza, G.
2019. 9th Conference on Learning Factories, CLF 2019; Braunschweig; Germany; 26 March 2019 through 28 March 2019, 38–44, Elsevier. doi:10.1016/j.promfg.2019.03.007
Augmented Go & See: An approach for improved bottleneck identification in production lines
Hofmann, C.; Staehr, T.; Cohen, S.; Stricker, N.; Haefner, B.; Lanza, G.
2019. 9th Conference on Learning Factories, CLF 2019; Braunschweig; Germany; 26 March 2019 through 28 March 2019. Ed.: C. Herrmann, 148–154, Elsevier. doi:10.1016/j.promfg.2019.03.023
Planning for changeability and flexibility using a frequency perspective
Echsler Minguillon, F.; Schömer, J.; Stricker, N.; Lanza, G.; Duffie, N.
2019. CIRP annals, manufacturing technology, 68 (1), 427–430. doi:10.1016/j.cirp.2019.03.006
Methodology on developing an assessment tool for intralogistics by considering cyber-physical production systems enabling technologies
Pei, S.; Zhao, J.; Zhang, N.; Guo, M.
2019. International journal of computer integrated manufacturing, 32 (4-5), 406–412. doi:10.1080/0951192X.2019.1605200
Optimization of the stream finishing process for mechanical surface treatment by numerical and experimental process analysis
Zanger, F.; Kacaras, A.; Neuenfeldt, P.; Schulze, V.
2019. CIRP annals, manufacturing technology, 68 (1), 373–376. doi:10.1016/j.cirp.2019.04.086
Integrated approach for optimizing quality control in international manufacturing networks
Arndt, T.; Kumar, M.; Lanza, G.; Tiwari, M. K.
2019. Production planning & control, 30 (2-3), 225–238. doi:10.1080/09537287.2018.1534271
Reconfigurable modular production plant for thermoplastic hybrid composites
Moll, P.; Schäfer, M.; Coutandin, S.; Fleischer, J.
2019. Production engineering, 13 (3-4), 469–477. doi:10.1007/s11740-019-00898-z
Optimization of the Linear Coil Winding Process by Combining New Actuator Principles on the Basis of Wire Forming Analysis
Hofmann, J.; Komodromos, A.; Fleischer, J.; Tekkaya, A. E.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658264, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658264
Intelligent Rotor Assembly Enabling Positive Balancing Concepts for High-Performance Permanent Magnet Rotors
Wößner, W.; Stoll, J.; Flammer, M. O.; Wurster, P.; Peter, M.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658367, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658367
Systematic Development and Comparison of Concepts for an Automated Series-Flexible Trickle Winding Process
Halwas, M.; Ambs, P.; Marsetz, M.; Baier, C.; Schigal, W.; Hofmann, J.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658360, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658360
FE-Based Simulation of Hairpin Shaping Processes for Traction Drives
Wirth, F.; Kirgor, T.; Hofmann, J.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658278, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658278
Development of a Data Fusion-Based Multi-Sensor System for Hybrid Sheet Molding Compound. PhD dissertation
Schäferling, M.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093417
Surface texturing of TiAl6V4 using cutting tools in reverse
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia manufacturing, 18, 97–103. doi:10.1016/j.promfg.2018.11.013
Influence of cutting edge asymmetry on grain refinement of Ti6Al4V
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia CIRP, 71, 232–237. doi:10.1016/j.procir.2018.05.065
Robust assignment of customer orders with uncertain configurations in a production network for aircraft manufacturing
Buergin, J.; Blaettchen, P.; Kronenbitter, J.; Molzahn, K.; Schweizer, Y.; Strunz, C.; Almagro, M.; Bitte, F.; Ruehr, S.; Urgo, M.; Lanza, G.
2019. International journal of production research, 57 (3), 749–763. doi:10.1080/00207543.2018.1482018
A modular-based approach for Just-In-Time Specification of customer orders in the aircraft manufacturing industry
Buergin, J.; Belkadi, F.; Hupays, C.; Gupta, R. K.; Bitte, F.; Lanza, G.; Bernard, A.
2018. CIRP journal of manufacturing science and technology, 21, 61–74. doi:10.1016/j.cirpj.2018.01.003
Influence of Complementary Machining on fatigue strength of AISI 4140
Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2018. CIRP annals, manufacturing technology, 67 (1), 583–586. doi:10.1016/j.cirp.2018.04.103
Reinforcement learning for adaptive order dispatching in the semiconductor industry
Stricker, N.; Kuhnle, A.; Sturm, R.; Friess, S.
2018. CIRP annals, manufacturing technology, 67 (1), 511–514. doi:10.1016/j.cirp.2018.04.041
Cost-oriented planning of equipment for selective laser melting (SLM) in production lines
Kopf, R.; Gottwald, J.; Jacob, A.; Brandt, M.; Lanza, G.
2018. CIRP annals, manufacturing technology, 67 (1), 471–474. doi:10.1016/j.cirp.2018.04.032
Order allocation and sequencing with variable degree of uncertainty in aircraft manufacturing
Urgo, M.; Buergin, J.; Tolio, T.; Lanza, G.
2018. CIRP annals, manufacturing technology, 67 (1), 431–436. doi:10.1016/j.cirp.2018.04.038
Additive manufacturing of metal components with the ARBURG plastic freeforming process
Spiller, Q.; Fleischer, J.
2018. CIRP annals, manufacturing technology, 67 (1), 225–228. doi:10.1016/j.cirp.2018.04.104
Composite materials parts manufacturing
Fleischer, J.; Teti, R.; Lanza, G.; Mativenga, P.; Möhring, H.-C.; Caggiano, A.
2018. CIRP annals, manufacturing technology, 67 (2), 603–626. doi:10.1016/j.cirp.2018.05.005
Robust order planning with planned orders for multi-variant series production in a production network
Buergin, J.; Hammerschmidt, A.; Hao, H.; Kramer, S.; Tutsch, H.; Lanza, G.
2019. International journal of production economics, 210, 107–119. doi:10.1016/j.ijpe.2019.01.013
Optimum selection of variable pitch for chatter suppression in face milling operations
Iglesias, A.; Dombovari, Z.; Gonzalez, G.; Munoa, J.; Stepan, G.
2018. Materials, 12 (1), Art. Nr.: 112. doi:10.3390/ma12010112
Limits of ceramics in the 3D-MID with additively produced aluminum substrate
Gotze, E.; Postler, K.; Buschulte, S.; Zanger, F.; Schulze, V.
2018. 13th International Congress Molded Interconnect Devices (MID), Würzburg, Germany, 25-26 September 2018, 15–20, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICMID.2018.8527061
An Electromechanical Co-Simulation Model Based on Lumped Parameter Model of Ball Screw Feed Drive System
Luo, L.; Zhang, W.; Sui, H.; Fleischer, J.
2018. 3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018; Phuket; Thailand; 27 September 2018 through 29 September 2018. Ed.: R. Das, Art. Nr.: 03007, EDP Sciences. doi:10.1051/matecconf/201823703007
A solid-analytical-based model for extracting cutter-workpiece engagement in 5-axis flank machining
Li, D.; Zhang, W.; Shang, T.; Gao, T.; Liu, S.; Fleischer, J.
2018. 3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018; Phuket; Thailand; 27 September 2018 through 29 September 2018. Ed.: R. Das, Art. Nr.: 01009, EDP Sciences. doi:10.1051/matecconf/201823701009
Knowing Me, Knowing You: Biosignals and Trust in the Surveillance Economy
Peukert, C.; Adam, M. T. P.; Hawlitschek, F.; Helming, S.; Lux, E.; Teubner, T.
2018. Proceedings of the Thirty Ninth International Conference on Information Systems, ICIS 2018, 1–9
Holistic approach for integrating customers in the design, planning, and control of global production networks
Hochdörffer, J.; Buergin, J.; Vlachou, E.; Zogopoulos, V.; Lanza, G.; Mourtzis, D.
2018. CIRP journal of manufacturing science and technology, 23, 98–107. doi:10.1016/j.cirpj.2018.07.004
Dual NURBS Path Smoothing for 5-Axis Linear Path of Flank Milling
Li, D.; Zhang, W.; Zhou, W.; Shang, T.; Fleischer, J.
2018. International journal of precision engineering and manufacturing, 19 (12), 1811–1820. doi:10.1007/s12541-018-0209-6
FleGSens - secure area monitoring using wireless sensor networks
Haas, C.; Krüger, D.; Pfisterer, D.; Fischer, S.; Dudek, D.; Kuntz, A.; Zitterbart, M.; Rothenpieler, P.
2009. Safety and security systems in Europe : proceedings of 4th international conference ; Potsdam, Germany, 4 - 5 June 2009. Ed.: M. Künzel, Fraunhofer IZM
Analysis of Interactions and Support of Decision Making for the Implementation of Manufacturing Systems 4.0 Methods
Liebrecht, C.; Schaumann, S.; Zeranski, D.; Antoszkiewicz, A.; Lanza, G.
2018. Procedia CIRP, 73, 161–166. doi:10.1016/j.procir.2018.04.005
Live biofeedback as a user interface design element: A review of the literature
Lux, E.; Dorner, V.; Knierim, M. T.; Adam, M. T. P.; Helming, S.; Weinhardt, C.
2018. Communications of the Association for Information Systems, 43 (1), 257–296. doi:10.17705/1CAIS.04318
Applying User Stories for a customer-driven Industry 4.0 Transformation
Lorenz, R.; Lorentzen, K.; Stricker, N.; Lanza, G.
2018. IFAC-PapersOnLine, 51 (11), 1335–1340. doi:10.1016/j.ifacol.2018.08.345
Self-describing connected components for live information access within production systems
Barton, D.; Gönnheimer, P.; Qu, C.; Fleischer, J.
2018. Procedia manufacturing, 24, 250–257. doi:10.1016/j.promfg.2018.06.031
Filament winding for automated joining of lightweight profiles
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2018. JEC Composites Magazine, 55 (122), 25–26
Development and evaluation of separation concepts for the controllable release of tacky prepreg from handling devices
Kupzik, D.; Ballier, F.; Roller, T.; Coutandin, S.; Fleischer, J.
2018. 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018; Stockholm Waterfront Congress CentreStockholm; Sweden; 16 May 2018 through 18 May 2018. Ed.: T. Kjellberg, 574–579, Elsevier. doi:10.1016/j.procir.2018.03.162
FEM simulation and acoustic emission based characterization of chip segmentation frequency in machining of Ti-6Al-4V
Zanger, F.; Kacaras, A.; Bächle, M.; Schwabe, M.; Puente León, F.; Schulze, V.
2018. 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018; Stockholm Waterfront Congress CentreStockholm; Sweden; 16 May 2018 through 18 May 2018. Ed.: T. Kjellberg, 1421–1426, Elsevier. doi:10.1016/j.procir.2018.03.196
Tribological Effects in and by Metal Cutting
Segebade, E.; Schneider, J.; Schulze, V.
2018. 8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation, ICTMP 2018; Elsinore; Denmark; 24 June 2018 through 26 June 2018. Ed.: N. Bay, 3–24, Trans Tech Publications. doi:10.4028/www.scientific.net/KEM.767.3
Gathering, evaluating and managing customer feedback during aircraft production
Gupta, R. K.; Belkadi, F.; Buergy, C.; Bitte, F.; Da Cunha, C.; Buergin, J.; Lanza, G.; Bernard, A.
2018. Computers & industrial engineering, 115, 559–572. doi:10.1016/j.cie.2017.12.012
Staff scheduling in job rotation environments considering ergonomic aspects and preservation of qualifications
Hochdörffer, J.; Hedler, M.; Lanza, G.
2018. Journal of manufacturing systems, 46, 103–114. doi:10.1016/j.jmsy.2017.11.005
Kostenorientierte Planung von Fertigungsfolgen additiver Technologien. PhD dissertation
Kopf, R.
2018. Shaker Verlag
Experimental and numerical investigations of wire bending by linear winding of rectangular tooth coils
Komodromos, A.; Tekkaya, A. E.; Hofmann, J.; Fleischer, J.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 150007, American Institute of Physics (AIP). doi:10.1063/1.5035014
Orthogonal cutting of laser beam melted parts
Götze, E.; Zanger, F.; Schulze, V.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 070023. doi:10.1063/1.5034919
Product variety management using data-mining methods : Reducing planning complexity by applying clustering analysis on product portfolios
Hochdörffer, J.; Laule, C.; Lanza, G.
2018. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 10th - 13th December 2017, 593–597, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM.2017.8289960
Challenges of high Quality and high Performance Cell Stacking
Fleischer, J.
2017. Advanced Automotive Battery Conference (AABC), Mainz, January 30 - February 2, 2017
Das Produktionssystem für Batterien
Fleischer, J.; Ruprecht, E.; Baumeister, M.; Haag, S.
2012. Die Zukunft der Fertigungstechnik : Tagungsband Wiener Produktionstechnik-Kongress 2012. Hrsg.: F. Bleichher, 7–16, Neuer Wiss.Verl
Automated Handling of Limp Foils in Lithium-Ion-Cell Manufacturing
Fleischer, J.; Ruprecht, E.; Baumeister, M.; Haag, S.
2012. Leveraging technology for a sustainable world : Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Berkeley, CA, May 23-25, 2012. Ed.: D.A. Dornfeld, 353–356, Springer Verlag
Microstructural and hardness changes in aluminum alloy Al-7075 : Correlating machining and equal channel angular pressing
Imbrogno, S.; Umbrello, D.; Segebade, E.; Fellmeth, A.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, American Institute of Physics (AIP). doi:10.1063/1.5008112
Entwicklungsstrukturen intrinsischer Hybride : Von der Entwicklung über die Produktion zur Schadenscharakterisierung = Development structures for intrinsic hybrids
Pohl, M.; Stommel, M.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.
2017. wt Werkstattstechnik online, 107 (7-8), 546–550
Industrie 4.0 neue Antworten auf die Fragen der Produktion von morgen
Fleischer, J.
2017. wt Werkstattstechnik online, 107 (7-8), 479
Cutting Simulations Using a Commercially Available 2D/3D FEM Software for Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 73–78. doi:10.1016/j.procir.2017.03.195
Kinematic Hardening of AISI 5120 during Machining Operations
Fellmeth, A.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 58, 104–109. doi:10.1016/j.procir.2017.03.201
Digitalization of automotive industry - Scenarios for future manufacturing
Peters, S.; Chun, J.-H.; Lanza, G.
2016. Manufacturing review, 3 (1), Art.Nr.: 2015030. doi:10.1051/mfreview/2015030
Gewinde-Wirbeln und Fräsen schwer zerspanbarer Werkstoffe = Efficient thread whirling and milling of difficult-to-cut materials
Schulze, V.; Sellmeier, V.; Abele, E.; Kannwischer, M.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (7-8), 443–446. doi:10.3139/104.111755
Flexible Handhabung und Montage: Anpassbare Lösungen in der Produktionstechnik
Fleischer, J.; Zäh, M. F.
2015. wt Werkstattstechnik online, 105 (9), 560
Erfolgskontrolle textiler Vereinzelungsprozesse = Success monitoring of fabric separation processes
Fleischer, J.; Förster, F.
2015. wt Werkstattstechnik online, 105 (9), 561–566
Schlank und ressourceneffizient produzieren : Planung und Bewertung des Lean- und Green-Methodeneinsatzes = Lean and Green Manufacturing
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 231–237
Skalierbare Automatisierung und Industrie 4.0 = Scalable automation enabled by Industrie 4.0
Greinacher, S.; Echsler Minguillon, F.; Häfner, B.; Stricker, N.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (9), 659–665
Shopfloor-getriebene Einführung von Industrie 4.0 : Ein Bottom-up-Ansatz zur Reifegradbewertung für Industrie 4.0-Anwendungen = Shopfloor-driven implementation of Industrie 4.0
Liebrecht, C.; Bürgin, J.; Benterbusch, J.; Kiefer, C.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (7-8), 539–543
Leistungssteigerung durch Kombination von Produktionstechnik und Qualitätssicherung
Schulze, V.
2016. wt Werkstattstechnik online, 106 (11-12), 781
Characterisation and Optimization of in-process Eddy Current Sensor Arrays Using Computed Tomography
Berger, D.; Will, T.; Töpper, H. C.; Lanza, G.; Koster, D.; Herrmann, H. G.
2017. Procedia CIRP, 66, 243–248. doi:10.1016/j.procir.2017.03.363
Manufacturing of Textile Preforms with an Intelligent Draping and Gripping System
Förster, F.; Ballier, F.; Coutandin, S.; Defranceski, A.; Fleischer, J.
2017. Procedia CIRP, 66, 39–44. doi:10.1016/j.procir.2017.03.370
Machinability of Continuous-Discontinuous Long Fiber Reinforced Polymer Structures
Helfrich, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 66, 193–198. doi:10.1016/j.procir.2017.03.366
New Concepts for Quality Assurance of Lightweight Material
Zaiß, M.; Demmerle, J.; Oergele, J.-N.; Lanza, G.
2017. Procedia CIRP, 66, 259–264. doi:10.1016/j.procir.2017.03.224
Life Cycle Performance in der Produktionstechnik : Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz = Life cycle performance in manufacturing
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7-8), 513–517
Einsatz von Industrierobotern: Verborgene Potentiale und Chancen
Fleischer, J.; Zäh, M. F.
2013. wt Werkstattstechnik online, 103 (9), 643
Fluid elements in machine tools
Wegener, K.; Mayr, J.; Merklein, M.; Behrens, B.-A.; Aoyama, T.; Sulitka, M.; Fleischer, J.; Groche, P.; Kaftanoglu, B.; Jochum, N.; Möhring, H.-C.
2017. CIRP annals, manufacturing technology, 66 (2), 611–634. doi:10.1016/j.cirp.2017.05.008
Innovative control of assembly systems and lines
Krüger, J.; Wang, L.; Verl, A.; Bauernhansl, T.; Carpanzano, E.; Makris, S.; Fleischer, J.; Reinhart, G.; Franke, J.; Pellegrinelli, S.
2017. CIRP annals, manufacturing technology, 66 (2), 707–730. doi:10.1016/j.cirp.2017.05.010
Advances in material and friction data for modelling of metal machining
Melkote, S. N.; Grzesik, W.; Outeiro, J.; Rech, J.; Schulze, V.; Attia, H.; Arrazola, P.-J.; M’Saoubi, R.; Saldana, C.
2017. CIRP annals, manufacturing technology, 66 (2), 731–754. doi:10.1016/j.cirp.2017.05.002
Concept Development for the Verification of the Didactic Competence Promotion for the Learning Factory on Global Production
Liebrecht, C.; Hochdörffer, J.; Treber, S.; Moser, E.; Erbacher, T.; Gidion, G.; Lanza, G.
2017. Procedia manufacturing, 9, 315–322. doi:10.1016/j.promfg.2017.04.019
Demonstration of a Concept for Scalable Automation of Assembly Systems in a Learning Factory
Buergin, J.; Minguillon, F. E.; Wehrle, F.; Haefner, B.; Lanza, G.
2017. Procedia manufacturing, 9, 33–40. doi:10.1016/j.promfg.2017.04.026
Use of Thermography and Ultrasound for the Quality Control of SMC Lightweight Material Reinforced by Carbon Fiber Tapes
Zaiß, M.; Jank, M.-H.; Netzelmann, U.; Waschkies, T.; Rabe, U.; Herrmann, H.-G.; Thompson, M.; Lanza, G.
2017. Procedia CIRP, 62, 33 – 38. doi:10.1016/j.procir.2016.06.039
Function-oriented measurements and uncertainty evaluation of micro-gears for lifetime prognosis
Haefner, B.; Lanza, G.
2017. CIRP annals, manufacturing technology, 66 (1), 475–478. doi:10.1016/j.cirp.2017.04.065
Aktive Gestaltung globaler Produktionsnetzwerke = Active Design of Production Networks
Friedli, T.; Lanza, G.; Schuh, G.; Treber, S.; Wiech, M.; Gützlaff, A.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (5), 279–283. doi:10.3139/104.111716
Generation of Planned Orders and their Matching with Customer Orders in Multi-variant Series Production
Buergin, J.; Beisecker, J.; Fischer, S.; Geier, B.; Tutsch, H.; Mercamp, S.; Lanza, G.
2017. Procedia CIRP, 61, 499–504. doi:10.1016/j.procir.2016.11.159
Web-based Component Data for the Commissioning of Machine Tools
Klee, B.; Bauer, J.; Jiang, H.; Fleischer, J.
2017. Procedia CIRP, 61, 329–334. doi:10.1016/j.procir.2016.11.145
Gestaltung des Servicegeschäfts von Maschinen- und Anlagenbauern : Entwicklung einer Entscheidungsmatrix
Kopf, R.; Appel, D.; Lehmann, S.; Lanza, G.
2014. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (12), 927–930. doi:10.3139/104.111256
Herstellkosten im Rahmen der Elektromobilität : Konzeptionierung und Anwendung eines stochastischen Prognosemodells
Hochdörffer, J.; Maul, J.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (3), 122–125. doi:10.3139/104.111288
Wirtschaftlichkeitsbetrachtung von Inline-Messtechnik in Werkzeugmaschinen
Brabandt, D.; Berger, D.; Brenner, D.; Heinzler, A.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (4), 210–213. doi:10.3139/104.111305
Automatisierung der Handhabung von Batteriezellen und Rahmen für die Batteriemodulmontage
Haag, M.; Haag, S.; Klosok, M.; Kunz, G.; Marquart, J.; Nehring, J. G.; Schurer, R.; Fleischer, J.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (7-8), 460–465. doi:10.3139/104.111356
Instandhaltungsleistungen im Servicenetzwerk : Entwicklung eines Kennzahlensystems zur Bewertung der Servicefähigkeit
Kopf, R.; Sommer, A.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (7-8), 429–433. doi:10.3139/104.111378
Tiefgezogene Verpackungen von Lithium-Ionen-Pouchzellen = Deep drawn packages of Lithium ion pouch cells
Fleischer, J.; Singer, R.; Langknecht, F.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (11), 730–733. doi:10.3139/104.111432
Sensorik zur Detektion einer Beschichtungskante in der Lithium-Ionen-Zellfertigung
Baumeister, M.; Fleischer, J.; Grether, G.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 32–35. doi:10.3139/104.111455
Planung einer Montagelinie mit skalierbarem Automatisierungsgrad
Lanza, G.; Stähr, T.; Sapin, S.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (10), 614–617. doi:10.3139/104.111610
Total Cost of Ownership-Betrachtungen von Werkzeugmaschinen : Chancen und Herausforderungen = Chances and Challenges for Total Cost of Ownership Calculations of Machine Tools
Lanza, G.; Schulze, V.; Bejnoud, F.; Stähr, T.; Wruck, A.; Ren, L.-H.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (12), 798–801. doi:10.3139/104.111649
Identification of an optimal cutting edge microgeometry for Complementary Machining
Zanger, F.; Gerstenmeyer, M.; Weule, H.
2017. CIRP annals, manufacturing technology, 66 (1), 81–84. doi:10.1016/j.cirp.2017.04.026
Qualification of the stream finishing process for surface modification
Schulze, V.; Gibmeier, J.; Kacaras, A.
2017. CIRP annals, manufacturing technology, 66 (1), 523–526. doi:10.1016/j.cirp.2017.04.079
Adaptive tuned mass damper with variable mass for chatter avoidance
Burtscher, J.; Fleischer, J.
2017. CIRP annals, manufacturing technology, 66 (1), 397–400. doi:10.1016/j.cirp.2017.04.059
Optimization of process chain for continuous-discontinuous long fiber reinforced polymer structures
Pangboonyanon, W.; Zaiß, M.; Fleischer, J.; Lanza, G.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, 1–8, European Society for Composite Materials (ESCM)
Numerical investigation of the ignition of diethyl ether/air and propane/air mixtures by hot jets
Fischer, S.; Markus, D.; Maas, U.
2017. Journal of loss prevention in the process industries, 49 (Part B), 832–838. doi:10.1016/j.jlp.2017.03.010
Considering Interdependencies of KPIs – Possible Resource Efficiency and Effectiveness Improvements
Stricker, N.; Micali, M.; Dornfeld, D.; Lanza, G.
2017. Procedia manufacturing, 8, 300–307. doi:10.1016/j.promfg.2017.02.038
Influences of separation and joining processes on single tooth laminated stacks
Kraemer, A.; Veigel, M.; Pontner, P.; Doppelbauer, M.; Lanza, G.
2017. 6th International Conference Electric Drives Production (E/DPC), November 30th - December 1st, 2016, Nuremberg, Germany : Proceedings. Ed.: IEEE, 178–185, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851331
Simulation of the assembly process of the insert technique for distributed windings
Hofmann, J.; Blanc, F. S.-L.; Krause, M.; Wirth, F.; Fleischer, J.
2016. 6th International Electric Drives Production Conference (E/DPC), Nürnberg, November 30 - December 1, 2016. Proceedings, 144–148, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851326
Planning approach for a changeable multi model assembly system
Fisel, J.; Lanza, G.
2016. 6th International Electric Drives Production Conference (E/DPC), Nürnberg, November 30 - December 1, 2016. Proceedings, 212–216, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851336
The Influence of Tool Holder Technologies on Milling Performance
Fleischer, J.; Schulze, V.; Klaiber, M.; Bauer, J.; Zanger, F.; Boev, N.; Leberle, U.; Spohrer, A.; Rothaupt, B.
2016. Procedia CIRP, 46, 226–229. doi:10.1016/j.procir.2016.03.183
Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes
Lienert, F.; Gerstenmeyer, M.; Krall, S.; Lechner, C.; Trauth, D.; Bleicher, F.; Schulze, V.
2016. Procedia CIRP, 45, 371–374. doi:10.1016/j.procir.2016.02.143
Materialeffizienz im Resin-Transfer-Moulding-Prozess - Ganzheitliche Subpreforming-Strategie erlaubt Reduktion des Faserverschnitts
Fleischer, J.; Albers, A.; Coutandin, S.; Spadinger, M.
2016. VDI-Z integrierte Produktion, 16 (1), 82–84
Complementary Machining – Machining Strategy for Surface Modification
Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2016. Procedia CIRP, 45, 247–250. doi:10.1016/j.procir.2016.02.048
Adjusting the Factory Planning Process when Using Immature Technologies
Kopf, R.; Schlesinger, L.; Peters, S.; Lanza, G.
2016. Procedia CIRP, 41, 1011–1016. doi:10.1016/j.procir.2015.12.064
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
Ladewig, A.; Schlick, G.; Fisser, M.; Schulze, V.; Glatzel, U.
2016. Additive manufacturing, 10, 1–9. doi:10.1016/j.addma.2016.01.004
Interrelationship of Micro Dimensional Metrology and Micro Functional Testing for the Quality Assurance of Micro Gears
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, San Sebastian, Spain, 2. - 5. June, 2009. Ed.: Euspen, 187–190, European Society for Precision Engineering and Nanotechnology (euspen)
Matching of micro gears via dimensional metrology and functional testing
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, Delft, Netherlands, 31. May - 4. June, 2010, 51–54, European Society for Precision Engineering and Nanotechnology (euspen)
Increased Surface Integrity in Porous Tungsten from Cryogenic Machining with Cermet Cutting Tool
Schoop, J.; Ambrosy, F.; Zanger, F.; Schulze, V.; Jawahir, I. S.; Balk, T. J.
2016. Materials and manufacturing processes, 31 (7), 823–831. doi:10.1080/10426914.2015.1048467
Selecting key performance indicators for production with a linear programming approach
Stricker, N.; Echsler Minguillon, F.; Lanza, G.
2017. International journal of production research, 55 (19), 5537–5549. doi:10.1080/00207543.2017.1287444
Strategic planning of immature Technologies for serial application using the example of selective laser melting
Kopf, R.; Lanza, G.
2016. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Bali, Indonesia, 4–7 December 2016, 621–625, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM.2016.7797950
Im Gespräch: Fünf KIT Maschinenbauprofessorinnnen
Frohnapfel, B.; Deml, B.; Nestler, B.; Lanza, G.; Ovtcharova, J.
2013. LookKIT. Das Magazin für Forschung, Lehre, Innovation. The magazine for research, teaching, innovation, 2013 (3), 10–15
Risk Efficient Migration Strategies for Global Production Networks
Moser, E.; Stricker, N.; Lanza, G.
2016. Procedia CIRP, 57, 104–109. doi:10.1016/j.procir.2016.11.019
Residual Stress States After Piezo Peening Treatment at Cryogenic and Elevated Temperatures Predicted by FEM Using Suitable Material Models
Klumpp, A.; Tamam, M.; Lienert, F.; Dietrich, S.; Gibmeier, J.; Schulze, V.
2016. Materials research proceedings, 175–180. doi:10.21741/9781945291173-30
Funktionsintegriertes Maschinenkonzept für die Einzelblatt-Stapelbildung von Lithium-Ionen-Zellen
Baumeister, M.; Fleischer, J.
2016. Batterieforum Deutschland, Berlin, 6.-8.April 2016
Sensorik zur Detektion einer Beschichtungskante in der Lithium-Ionen-Zellfertigung
Baumeister, M.; Fleischer, J.; Grether, G.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 32–35
Cryogenic machining of porous tungsten for enhanced surface integrity
Schoop, J.; Ambrosy, F.; Zanger, F.; Schulze, V.; Balk, T. J.; Jawahir, I. S.
2016. Journal of materials processing technology, 229, 614–621. doi:10.1016/j.jmatprotec.2015.10.002
Eignung des Kunststoff-Freiformens für metallische Bauteile
Spiller, Q.; Müller, T.; Plewa, K.; Hanemann, T.; Fleischer, J.
2016. VDI-Z integrierte Produktion, (11), 1–2
Integrated and Modular Didactic and Methodological Concept for a Learning Factory
Lanza, G.; Minges, S.; Stoll, J.; Moser, E.; Haefner, B.
2016. Procedia CIRP, 54, 136–140. doi:10.1016/j.procir.2016.06.107
Quantitative Analyse stochastischer Einflüsse auf die Leistungsfähigkeit von Produktionssystemen
Lanza, G.; Furmans, K.; Jondral, A.; Peter, K.; Stoll, J.; Özden, E.; Schwab, M.
2011. wt Werkstattstechnik online, 101 (4), 210–213
Optimal investment policies in premature manufacturing technologies
Peters, S.
2015. International journal of production research, 53 (13), 3963–3974. doi:10.1080/00207543.2014.980455
Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.
2016. Journal of the European Ceramic Society, 36 (5), 1109–1125. doi:10.1016/j.jeurceramsoc.2015.10.046
Effects of defects in series production of hybrid CFRP lightweight components – detection and evaluation of quality critical characteristics
Berger, D.; Brabandt, D.; Bakir, C.; Hornung, T.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.; Pohl, M.; Stommel, M.
2017. Measurement, 95, 389–394. doi:10.1016/j.measurement.2016.10.003
Modelling of cutting induced surface phase transformations considering friction effects
Schulze, V.; Michna, J.; Schneider, J.; Gumbsch, P.
2011. Procedia engineering, 19, 331–336. doi:10.1016/j.proeng.2011.11.121
Application of a meta-analysis of aortic geometry to the generation of a compliant phantom for use in particle image velocimetry experimentation
Huetter, L.; Geoghegan, P. H.; Docherty, P. D.; Soltanipour Lazarjan, M.; Clucas, D.; Jermy, M.
2015. IFAC-PapersOnLine, 48 (20), 407–412. doi:10.1016/j.ifacol.2015.10.174
The RobustPlaNet Project: Towards Shock-Robust Design Of Plants And Their Supply Chain Networks
Jauregui Becker, J. M.; Kádár, B.; Colledani, M.; Stricker, N.; Urgo, M.; Unglert, J.; Gyulai, D.; Moser, E.
2016. IFAC-PapersOnLine, 49 (12), 29–34. doi:10.1016/j.ifacol.2016.07.545
Preparation of Papers for IFAC Conferences & Symposia: Migration Planning for Global Production Networks using Markovian Decision Processes
Moser, E.; Stricker, N.; Liebrecht, C.; Hiller, A.; Ziegler, M.; Lanza, G.
2016. IFAC-PapersOnLine, 49 (12), 35–40. doi:10.1016/j.ifacol.2016.07.546
Learning to Enumerate
Jörger, P.; Baba, Y.; Kashima, H.
2016. Artificial Neural Networks and Machine Learning (ICANN) - 25th International Conference on Artificial Neural Networks, Barcelona, Spain, September 6-9, 2016, Part I, 453–460, Springer Verlag. doi:10.1007/978-3-319-44778-0_53
Surface modification by machine hammer peening and burnishing
Schulze, V.; Bleicher, F.; Groche, P.; Guo, Y. B.; Pyun, Y. S.
2016. CIRP annals, manufacturing technology, 65 (2), 809–832. doi:10.1016/j.cirp.2016.05.005
Cryogenic manufacturing processes
Jawahir, I. S.; Attia, H.; Biermann, D.; Duflou, J.; Klocke, F.; Meyer, D.; Newman, S. T.; Pusavec, F.; Putz, M.; Rech, J.; Schulze, V.; Umbrello, D.
2016. CIRP annals, manufacturing technology, 65 (2), 713–736. doi:10.1016/j.cirp.2016.06.007
Co-Definition of Product Structure and Production Network for Frugal Innovation Perspectives: Towards a Modular-based Approach
Belkadi, F.; Buergin, J.; Gupta, R. K.; Zhang, Y.; Bernard, A.; Lanza, G.; Colledani, M.; Urgo, M.
2016. Procedia CIRP, 50, 589–594. doi:10.1016/j.procir.2016.04.160
Target System Based Design of Quality Control Strategies in Global Production Networks
Arndt, T.; Lemmerer, C.; Sihn, W.; Lanza, G.
2016. Procedia CIRP, 50, 336–341. doi:10.1016/j.procir.2016.04.167
Coil winding process modelling with deformation based wire tension analysis
Blanc, F. S.-L.; Hofmann, J.; Simmler, R.; Fleischer, J.
2016. CIRP annals, manufacturing technology, 65 (1), 65–68. doi:10.1016/j.cirp.2016.04.037
Performance measurement in flow lines - Key to performance improvement
Stricker, N.; Pfeiffer, A.; Moser, E.; Kádár, B.; Lanza, G.
2016. CIRP annals, manufacturing technology, 65 (1), 463–466. doi:10.1016/j.cirp.2016.04.031
Supporting multi-level and robust production planning and execution
Stricker, N.; Pfeiffer, A.; Moser, E.; Kádár, B.; Lanza, G.; Monostori, L.
2015. CIRP annals, manufacturing technology, 64 (1), 415–418. doi:10.1016/j.cirp.2015.04.115
Optimization of selective assembly and adaptive manufacturing by means of cyber-physical system based matching
Lanza, G.; Haefner, B.; Kraemer, A.
2015. CIRP annals, manufacturing technology, 64 (1), 399–402. doi:10.1016/j.cirp.2015.04.123
Materials in machine tool structures
Moehring, H.-C.; Brecher, C.; Abele, E.; Fleischer, J.; Bleicher, F.
2015. CIRP annals, manufacturing technology, 64 (2), 725–748. doi:10.1016/j.cirp.2015.05.005
Featurebasierte Technologieplanung zum Preforming von textilen Halbzeugen. PhD dissertation
Wagner, H.
2016. Shaker Verlag
Sustainable Manufacturing Through Energy Efficient Handling Processes
Fleischer, J.; Förster, F.; Gebhardt, J.
2016. 13th Global Conference on Sustainable Manufacturing, GCSM 2015; Binh Du’o’ng New City; Viet Nam; 16 September 2015 through 18 September 2015. Ed.: G. Seliger, 574–579, Elsevier. doi:10.1016/j.procir.2016.01.136
Condition Monitoring of Rack and Pinion Drive Systems: Necessity and Challenges in Production Environments
Ehrmann, C.; Isabey, P.; Fleischer, J.
2016. 13th Global Conference on Sustainable Manufacturing, GCSM 2015; Binh Du’o’ng New City; Viet Nam; 16 September 2015 through 18 September 2015. Ed.: G. Seliger, 197–201, Elsevier. doi:10.1016/j.procir.2016.01.101
Analysis of wire tension control principles for highly dynamic applications in coil winding: Investigation of new tension control devices for noncicurlar orthocyclic coils
Blanc, F. S. L.; Fleischer, J.; Schmitt, M.; Unger, M.; Hagedorn, J.
2015. 5th International Electric Drives Production Conference (EDPC 2015), Nürnerg, Germany, 15 - 16 September 2015, 7323202, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323202
Analysis of wear behavior of stamping tools in the production of electrical steel sheets
Kraemer, A.; Stoll, J.; Blickle, D.; Lanza, G.; Boeker, B.
2015. 2015 5th International Electric Drives Production Conference (EDPC 2015), Nürnberg, Germany, 15 – 16 September 2015, Art. Nr. 7323218, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323218
Optimized magnet assembly algorithms for reduced rotor unbalance: New rotor balancing strategy by measuring the weight of each magnet and placing it according to an algorithm
Peter, M.; Fleischer, J.
2015. 5th International Electric Drives Production Conference (EDPC 2015), Nürnberg, Germany, 15 - 16 September 2015, Art. Nr. 7323204, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323204
Joining zone design for electromagnetically crimped connections
Weddeling, C.; Walter, V.; Haupt, P.; Tekkaya, A. E.; Schulze, V.; Weidenmann, K. A.
2015. Journal of Materials Processing Technology, 225, 240–261. doi:10.1016/j.jmatprotec.2015.06.009
Characterization of debonding strength in steel-wire-reinforced aluminum and its influence on material fracture
Morasch, A.; Reeb, A.; Baier, H.; Weidenmann, K. A.; Schulze, V.
2015. Engineering Fracture Mechanics, 141, 242–259. doi:10.1016/j.engfracmech.2015.05.029
Continuous folding process for the assembly of lithium-ion cells
Haag, S.; Fleischer, J.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
Function integrated machine module for the production of cell stacks
Baumeister, M.; Fleischer, J.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
Fatigue Behavior and Lifetime Prediction of Unidirectionally Wire Reinforced Lightweight Metal Matrix Composites [Preprint]
Merzkirch, M.; Hammers, T.; Reeb, A.; Schwind, T.; Riedl, S.; Thiel, L.; Henschel, A.; Kerscher, E.; Schulze, V.; Weidenmann, K. A.
2015. Advanced engineering materials, 17 (6), 905–911. doi:10.1002/adem.201400354
A Comparison of FSW, BHLW and TIG Joints for AL-Si-Mg alloy (EN AW-6082 T6)
Walter, V.; Weidenmann, K. A.; Schulze, V.
2014. 1st International Conference on Manufacture of Lightweight Components, ManuLight2014; Dortmund; Germany; 3 April 2014 through 4 April 2014, 120–125, Elsevier. doi:10.1016/j.procir.2014.06.118
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032
An Experimental Study of Cryogenic Machining on Nanocrystalline Surface Layer Generation
Ambrosy, F.; Zanger, F.; Schulze, V.; Jawahir, I.-S.
2014. Procedia CIRP, 13, 169–174. doi:10.1016/j.procir.2014.04.029
Experimentally validated residual stresses and distortion prediction for dual frequency induction hardening
Schwenk, M.; Hoffmeister, J.; Schulze, V.
2014. International Journal of Applied Electromagnetics and Mechanics, 44 (2), 127–135. doi:10.3233/JAE-141752
Automatisiertes Fügen von Tragprofilen mittels Faserwickeln. PhD dissertation
Schädel, J.
2014. Shaker Verlag
Overcoming the challenges of automated preforming of semi-finished textiles
Fleischer, J.; Lanza, G.; Brabandt, D.; Wagner, H.
2012. SAMPE Europe Symposium 2012 (SEMAT 12) : “Symposium on Automation of Advanced Composites and its Technology”, Munich, Germany, 24-25 May 2012. Ed.: M. A. Erath, 114–143, SAMPE Europe Conference Management
Highly integrated piezo-hydraulic feed axis
Fleischer, J.; Bauer, J.
2012. Procedia CIRP, 1 (1), 325–329. doi:10.1016/j.procir.2012.04.058
Effektiv auf kleinstem Raum
Ayhan, S.; Bauer, J.; Gerdes, A.; Grimske, S.; Heinze, T.; Kern, D.; Müller, C.; Pollmann, J.
2013. Maschine + Werkzeug, 2, 76–77
Effizienzsteigerung der Instandhaltung von Werkzeugsystemen - Ableitung von angepassten Instandhaltungsintervallen und -inhalten
Munzinger, C.; Broos, A.; Hennrich, H.; Coerdt, F.; Schopp, M.; Wieser, J.
2008. KIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 345–354, Zillekens
Lebenszyklusoptimierte Maschinen durch grenzlastnahen Einsatz von Maschinenelementen - Ableitung und Bewertung angepasster Service-Szenarien
Fleischer, J.; Munzinger, C.; Schopp, M.; Broos, A.; Hennrich, H.; Wieser, J.
2008. AKIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 113–124, Zillekens
Development and implementation of smart maintenance activitiesfor machine tools
Munzinger, C.; Fleischer, J.; Broos, A.; Hennrich, H.; Wieser, J.; Ochs, A.; Schopp, M.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (4), 237–246
Interface elements for low-effort module adjustment inmachine tools
Hennrich, H.; Korff, D.; Munzinger, C.; Abele, E.
2010. 2nd CIRP PMI 2010, 10.06.2010-11.06.2010, Vancouver, Kanada, CIRP Process Machine Interactions Conference Proceedings
Increasing maintenance efficiency - A strategy regarding condition and load-based approaches for diagnosis and prognosis
Munzinger, C.; Schopp, M.; Hennrich, H.
2010. 2nd CIRP PMI 2010, 10.06-11.06.2010, Vancouver, Kanada, CIRP Process Machine Interactions Conference Proceedings
Optimierte Instandhaltung durch aufwandsminimale Kombination von zustands- und belastungsorientierten Diagnose- und Prognoseansätzen
Munzinger, C.; Schopp, M.; Hennrich, H.
2010. AKIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 381–390, Zillekens
Zustands- und belastungsorientierte Ansätze zur Diagnose und Prognose von Werkzeugmaschinen
Wieschollek, M.; Hennrich, H.
2010. Life-Cycle-Performance produktionstechnischer Maschinen und Anlagen. Hrsg.: J. Fleischer, 16–39, Shaker Verlag
Assessment of Load-dependent and Condition-oriented Methods for the Lifetime Estimation of Ball Screws
Fleischer, J.; Hennrich, H.
2012. Sustainable Manufacturing. Ed.: G. Seliger, 109–113, Springer Verlag. doi:10.1007/978-3-642-27290-5_16
Intelligenter Kugelgewindetrieb zur Steigerung der Life Cycle Performance
Hennrich, H.
2013. wbk Herbsttagung 2012, 22.10.2012, Karlsruhe, Deutschland. Life Cycle Performance produktionstechnischer Maschinen und Anlagen [Konferenz], 103–118
Montage von Werkzeugmaschinen
Fleischer, J.; Schöning, S.; Gebhardt, J.; Hennrich, H.
2014. Handbuch Fügen, Handhaben, Montieren. Hrsg.: K. Feldmann, 734–750, Carl Hanser Verlag
Experimentelle Untersuchung von Bauteilschädigung und Werkzeugverschleiß bei der FVK-Bearbeitung
Schulze, V.; Klotz, S.; Zanger, F.
2012. Spanende Fertigung : Prozesse, Innovationen, Werkstoffe ; [40 Jahre ISF]. Hrsg.: D. Biermann, 330–337, Vulkan-Verlag
Herstellung von hochbelastbaren Bauteilen im Resin-Transfer-Molding Verfahren
Wagner, H.; Brabandt, D.; Förster, F.; Klotz, S.
2013. Hybrider Leichtbau - Metall trifft Faserverbund, 53–68, Shaker Verlag
Konstrukteurfähigkeiten heute und morgen
Denkena, B.; Albers, A.; Dengler, B.; Hoppen, P.
2011. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (10), 726–730
Micro structuring of Zr-based bulk metallic glasses
Schulze, V.; Hoppen, P.; Ruhs, C.; Weber, P.
2012. Proceedings of the 9th International Cenference on Multi-Material Micro Manufacture, 144–147, Verlag Research Publishing
Development of a 5-Axis Micro-Test-Work Piece forMicro-Milling Machine Tools
Fleischer, J.; Deuchert, M.; Chlipala, M.
2008. Conference Proceedings 3rd International Conference on CIRP High Performance Cutting, Dublin 12.06.2008-13.06.2008
Manufacturing and Quality Assurance of Micro Structured Crankshaft Bearings
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.
2011. 11th International Conference of the European Society for Precision Engineering & Nanotechnology, 23.05.2011-27.05.2011, Como, Italy. Ed.: H. Spaan .., 183–186, European Society for Precision Engineering and Nanotechnology (euspen)
Automated Measurement Data Analysis for Micro Structured Surfaces
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.; Haefner, B.
2012. 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 04.06.2012 - 07.06.2012, Stockholm, Sweden. Vol. 1, 235–238, European Society for Precision Engineering and Nanotechnology (euspen)
Optimierung von Tribosystemen durch gezielte Vorwegnahme des Einlaufs in der spanenden Endbearbeitung am Beispiel von Gleitlagerungen
Nguyen, T.; Ambrosy, F.
2013. 10. VDI-Fachtagung Gleit- und Wälzlagerungen, Gestaltung, Berechnung, Einsatz : mit Fachausstellung ; Schweinfurt, 23. und 24. April 2013 / VDI, Produkt- und Prozessgestaltung, 177–188, VDI Verlag
Numerische Materialmodellierung und deren Anwendung in der virtuellen Produktion
Zanger, F.; Autenrieth, H.; Hoffmeister, J.; Schulze, V.
2010. Graduiertenkolleg 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen, Begleitband zur 1. jährlichen Klausurtagung 2010. Hrsg.: R. Pabst, 125–129, Shaker Verlag
Neue Simulationsmethode zur Randschichtcharakterisierung unter Berücksichtigung der Mehrfachspanbildung beim Räumen
Osterried, J.; Zanger, F.; Autenrieth, H.; Schulze, V.
2010. Graduiertenkolleg 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen, Begleitband zur 1. jährlichen Klausurtagung 2010. Hrsg.: R. Pabst, 57–61, Shaker Verlag
Simulation of multiple chip formation when broaching SAE5120 low alloy steel
Schulze, V.; Osterried, J.; Meier, H.; Zanger, F.
2011. Advanced materials research, 223, 37–45. doi:10.4028/www.scientific.net/AMR.223.37
Investigation of the machining behavior of metal matrix composites (MMC) using chip formation simulation
Schulze, V.; Zanger, F.; Michna, J.; Ambrosy, F.; Pabst, R.
2011. Advanced Materials Research, 223, 20–209. doi:10.4028/www.scientific.net/AMR.223.20
Quantitative microstructural analysis of nanocrystalline surface layer induced by a modified cutting process
Schulze, V.; Zanger, F.; Ambrosy, F.
2013. Progress in Production Engineering, WGP Kongress 2013, July 23-24, Erlangen, 109–115, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.769.109
Untersuchung der Zerspanung von Metall-Matrix-Verbundwerkstoffen (MMC) mittels Finite-Elemente-Simulationen
Schulze, V.; Zanger, F.
2012. Spanende Fertigung : Prozesse, Innovationen, Werkstoffe ; [40 Jahre ISF]. Hrsg.: D. Biermann, 51–58, Vulkan-Verlag
Untersuchungen zum Einspannen von FVK
Gerstenmeyer, M.; Klotz, S.; Zanger, F.; Schulze, V.
2013. Maschinenmarkt, 2013, 14–17
FE-simulation of machining induced phase transformations considering friction as a function of temperature and sliding speed and detailed modeling of the heat transport
Schulze, V.; Zanger, F.; Boev, N.; Michna, J.; Maas, U.; Faltin, C.; Schneider, J.; Bollig, P.
2014. Advanced Engineering Materials, 16 (2), 137–141. doi:10.1002/adem.201300103
Development of a microstructured deep rolling tool for generation of nanocrystalline surface layer
Schulze, V.; Hoffmeister, J.; Zanger, F.; Ambrosy, F.; Erz, A.
2012. euspen Topical Meeting: Structured & Freeform Surfaces, 05.12.2012 - 06.12.2012, Teddington, UK, 57–80, Veranstalter European Society for Precision Engineering & Nanotechnology
Simulation of Distortion due to Machining of Thin-walled Components
Schulze, V.; Arrazola, P.; Zanger, F.; Osterried, J.
2013. Procedia CIRP, 8, 45–50. doi:10.1016/j.procir.2013.06.063
Verschleißbedingte Parameteranpassung bei der Bohrungsherstellung in faserverstärkten Kunststoffen
Schulze, V.; Zanger, F.; Klotz, S.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03.07.2013 - 05.07.2013, Karlsruhe, Deutschland, 961–970
Spanender Endbearbeitungsprozess zur Modifizierung der Randzonenzustände
Schulze, V.; Ambrosy, F.; Zanger, F.
2012. Konstruktion, (11/12), 14–16
Design of a measurement machine for quality assurance of preforms in the CFRP process chain
Lanza, G.; Brabandt, D.
2013. ISMTII 2013 - The 11th International Symposium on Measurement Technology and Intelligent Instruments. Ed.: R. Schmitt, 255–256, Apprimus Wissenschaftsverlag
Leitfaden zur Planung und Durchführung von Sourcingprojekten
Lanza, G.; Ruhrmann, S.
2013. Forschungsgemeinschaft Qualität (FQS)
Trends in der Fertigungsmesstechnik - Im Wechselspiel mit den Anforderungen
Lanza, G.; Brabandt, D.; Kölmel, A.; Häfner, B.
2013. Qualität und Zuverlässigkeit, 11, 44–47
Über alle Grenzen hinweg - Qualitätssicherung in globalen Wertschöpfungsnetzwerken
Lanza, G.; Arndt, T.; Häfner, B.
2013. Qualität und Zuverlässigkeit, 12, 26–29
Quality-Oriented Production Planning of Battery Assembly for Automotive Application
Lanza, G.; Sauer, A.
2013. Cirp Production Systems and Organization Scientific Technical Committee, 24.01.2013, Paris, Frankreich
Flexible series production of lamination stacks
Stoll, J.; Lanza, G.; Peters, S.
2013. 13th Stuttgart International Symposium Automotive and Engine Technology Volume 1, 26.02.2013 - 27.02.2013, Stuttgart, Deutschland. Hrsg.: ATZLive, 553–564, ATZlive
Calculation of Maintenance Costs on Poor Data Basis and Implementation in Industrial Practice
Lanza, G.; Stricker, N.; Appel, D.
2013. Product-Service Integration for Sustainable Solutions : Proceedings of the 5th CIRP International Conference on Industrial Product-Service Systems, Bochum, Germany, March 14th - 15th, 2013, 597–608, Springer Verlag. doi:10.1007/978-3-642-30820-8_50
Design for Testability for Micro-mechatronic Systems
Lanza, G.; Blank, T.; Haefner, B.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, 11.-13. März 2013, 283–292, Springer Verlag. doi:10.1007/978-3-642-30817-8_28
Reliability 2.0 - Challenges in Reliability of Future Production Systems
Lanza, G.; Stricker, N.
2013. International Applied Reliability Symposium, 17.04.2013 - 19.04.2013, Berlin, Deutschland, 441–453
Measuring Global Production Effectiveness
Lanza, G.; Stoll, J.; Stricker, N.; Peters, S.; Lorenz, C.
2013. Procedia CIRP, 7, 31–36. doi:10.1016/j.procir.2013.05.006
Measurement Setup for the Experimental Evaluation of Micro Gears
Lanza, G.; Haefner, B.
2013. 13th International Conference of the European Society for Precision Engineering & Nanotechnology, 27.05.2013 - 31.05.2013, Berlin, Germany, 128–131, European Society for Precision Engineering and Nanotechnology (euspen)
Markovian Decision Processes and Queueing Theory for Investment Planning of Production Systems
Peters, S.; Lanza, G.
2013. 9th Conference on Stochastic Models of Manufacturing and Service Operations, SMMSO 2013, 25.05.2013 - 30.05.2013, Seeon, Deutschland. Hrsg.: H. Tempelmeier, 167–174, Katholische Universität Eichstätt-Ingolstadt (KU)
Innovative Quality Strategies for Global Value-Added-Networks
Lanza, G.; Book, J.; Kippenbrock, K.; Saxena, A.
2013. Robust Manufacturing Control : Proceedings of the CIRP Sponsored Conference RoMaC 2012, Bremen, Germany, 18th-20th June 2012. Ed.: K. Windt, 271–286, Springer Verlag. doi:10.1007/978-3-642-30749-2_20
Optimization model for value added networks of globally operating companies
Lanza, G.; Ruhrmann, S.; Stricker, N.; Kohl, M.
2013. 22nd International Conference on Production Research, 28.07.2013 - 01.08.2013, Iguassu Falls, Brasilien, 1–7
Automated optical detection of particles and defects on a Li-Ion-cell surface using a single-point analysis
Lanza, G.; Koelmel, A.; Peters, S.; Sauer, A.; Stockey, S.
2013. 2013 IEEE International Conference on Automation Science and Engineering (CASE), 17th -20th August 2013 Madison, USA, 675–680, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CoASE.2013.6653950
Timesaving quality assurance for preforming in the automotive serial production of CFRP
Lanza, G.; Brabandt, D.; Bingemann, P.
2013. 19th Interantional Conference on Composite Materials, 28.07.2013 - 02.08.2013, Montreal, Kanada. Ed.: Pascal Hubert, 8309–8317, BytePress
Method for the identification of point in time for changes in production networks
Lanza, G.; Moser, R.; Jondral, A.
2013. 6th IFAC/ACM Conference on Management and Control of Production and Logistics, MCPL 2013; Fortaleza, Ceara; Brazil; 11 September 2013 - 13 September 2013. Ed.: S. Filho, 87–94, International Federation of Automatic Control. doi:10.3182/20130911-3-BR-3021.00008
Areal Characterization of Micro Gears by means of Computed Tomography
Lanza, G.; Haefner, B.
2013. 11th International Symposium on Measurement and Quality Control (ISMQC), 11.09.2013 - 13.09.2013, Krakau, Polen, 82–85
Monetary Assessment of an Integrated Lean-/Green-Concept
Lanza, G.; Greinacher, S.; Jondral, A.; Moser, R.
2013. 11th Global Conference on Sustainable Manufacturing, 23.09.2013 - 25.09.2013, Berlin, Germany. Ed.: G. Seliger, 548–553, Universitätsverlag der TU Berlin
Innovative product-services for robust global supply chains
Lanza, G.; Stricker, N.; Stoll, J.
2013. 17th Cambridge International Manufacturing Symposium, 19.09.2013 - 20.09.2013, Cambridge, United Kingdom, Disruptive supply network models in future industrial systems: configuring for resilience and sustainability, 1–12, Cambridge University
Assessment of Lamination Stack Production
Lanza, G.; Stoll, J.; Krämer, A.
2013. 3rd International Electric Drives Production Conference (E|DPC), 29.-30.10.2013, Nuremberg, Germany, Proceedings, 52–59, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689725
Configuration of a multi-use battery production
Lanza, G.; Sauer, A.; Kölmel, A.
2013. Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th, 2013. Ed.: M. F. Zaeh, 473–478, Springer Verlag. doi:10.1007/978-3-319-02054-9_80
Methodology for the lifetime prediction of micro gears dependent on present shape deviations and the material structure
Lanza, G.; Haefner, B.; Gibmeier, J.
2013. Safety, reliability and risk analysis: beyond the horizon: proceedings of the 22nd European Safety and Reliability Conference, Esrel 2013, Amsterdam, the Netherlands, 29th September - 2nd October 2013 ed. R. D. J. M. Steenbergen ..., 2663–2669, CRC Press
Flächenhafte Messung von Mikrozahnrädern mittels Computertomographie und Koordinatenmesstechnik
Lanza, G.; Haefner, B.
2013. 6. Kolloquium Mikroproduktion, 8.10.2013, Braunschweig, Deutschland, 1–6, Technische Universität Braunschweig
Concept of an intelligent Production Control for Global Manufacturing in dynamic Environments based on Rescheduling
Lanza, G.; Stricker, N.; Moser, R.
2013. IEEE Industrial Conference on Industrial Engineering and Engineering Management, 10.12.2013 - 13.12.2013, Bangkok, Thailand, 1–5, Institute of Electrical and Electronics Engineers (IEEE)
Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments
Diaz-Elsayed, N.; Jondral, A.; Greinacher, S.; Dornfeld, D.; Lanza, G.
2013. CIRP annals, manufacturing technology, 62 (1), 475–478. doi:10.1016/j.cirp.2013.03.066
Planung einer wandlungsfähigen Batteriemontage
Lanza, G.; Sauer, A.; Kölmel, A.
2013. wt Werkstattstechnik online, 103 (4), 281–284
TCO 2.0 -Ein Weg zu mehr Transparenz und Kommunikation
Lanza, G.; Appel, D.; Stricker, N.
2013. wt Werkstattstechnik online, 7/8, 605–609
Datenfusion bei der Messung von Mikrozahnrädern
Lanza, G.; Häfner, B.
2013. wt Werkstattstechnik online, 11/12, 841–846
The future of lightweight manufacturing - production-related challenges when hybridizing metals and continuous fiber-reinforced plastics
Fleischer, J.; Ochs, A.; Dosch, S.
2012. International Conference on "New Developments in Sheet Metal Forming", 22.05.2012 - 23.05.2012, Stuttgart, Germany, 51–70, Institute for Metal Forming Technology of University of Stuttgart
Miniaturized piezoelectric vibratory conveyor for the flexible handling of very different small parts
Fleischer, J.; Leberle, U.
2012. EUSPEN 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 04.06.2012 - 07.06.2012, Stockholm, Sweden, 59–62, Sieca Repro
Development of a compact micro machine for the machining of powder-injection moulded (PIM) green compacts
Fleischer, J.; Klimscha, K.; Ströbele, S.
2012. euspen International Conference, 04.06.2012 - 08.06.2012, Stockholm, Schweden, 258–261, Verlag Sieca Repro
Draping strategies and automation solutions for complex CFRP components
Härtel, F.; Wagner, H.; Middendorf, P.; Fleischer, J.
2012. SAMPE Europe 7th SETEC 12, 19.09.2012, Luzern, Schweiz, Advanced Composites - Design & Process for Sustainability, 161–166
Potential for Standardization and Guidelines of Product and Production Features of Electric Drives - Aggregation of survey results for possible electric drive standardization features
Sell-Le Blanc, F.; Ruprecht, E.; Fleischer, J.; Doppelbauer, M.
2013. 3rd International Electric Drives Production Conference (E|DPC), 29.-30.10.2013, Nürnberg, Deutschland, IEEE, 492–497, IEEE Computer Society. doi:10.1109/EDPC.2013.6689761
Technologieplanung zur automatisierten Fertigung von Preforms für CFK-Halbzeuge
Fleischer, J.; Wagner, H.
2013. Lightweight design, 6 (1), 30–33
Lokale Verstärkungen schnell erzielen
Fleischer, J.; Gebhardt, J.
2013. Maschinenmarkt, 4, 15–17
Trends im Elektromaschinenbau: Herausforderungen und aktuelle Entwicklungen der Produktionstechnik
Peter, M.; Sell-Le Blanc, F.; Fleischer, J.
2013. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 108 (6), 435–439
Resource Efficient Ball Screw by Adaptive Lubrication
Fleischer, J.; Hennrich, H.; Braun, J.
2012. 10th Global Conference on Sustainable Manufacturing, 31.10.2012 - 02.11.2012, Istanbul, Türkei, Towards Implementing Sustainable Manufacturing, digital
Ressourceneffizienter Kugelgewindetriebdurch adaptive Schmierung
Fleischer, J.; Hennrich, H.; Braun, J.
2012. Tagungsband AKIDA 2012, 9. Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 14.11.2012 - 15.11.2012, Aachen, Deutschland. Hrsg.: K. Nienhaus, 573–582, Verlag Zillekens
Gripping Technology for Carbon Fibre Material
Fleischer, J.; Ochs, A.; Förster, F.
2013. CIRP International Conference on Competitive Manufacturing, 30.01.2013, Stellenbosch, Südafrika, 65–71, Universität Stellenbosch
Increase of maintenance efficiency by a hybrid diagnosis and prognosis approach
Hennrich, H.; Fleischer, J.
2013. Lamdamap 10th International Conference, 20.03. - 21.03.2013, Buckinghamshire, UK, Laser Metrology and Performance X, 7–17
Design approach for an adaptable highly integrated hydraulic feed axis
Bauer, J.; Fleischer, J.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013, 593–602, Springer Verlag. doi:10.1007/978-3-642-30817-8_58
Active piezoelectric 2D-fiber-reinforced plastic spring for the actuation of a vibratory feeder
Leberle, U.; Fleischer, J.
2013. ASPE 2013 Spring Topical Meeting MIT Laboratory for Manufacturing and Productivity Annual Summit, 21.04.2013 - 23.04.2013, Boston, USA. Ed.: American Society for Precision Engineering, 131–135, 3M Company
Quality Assurance of Micro-Gears via 3D Surface Characterization
Lanza, G.; Viering, B.
2013. Product Lifecycle Management: Geometric Variations, 419–429, John Wiley and Sons. doi:10.1002/9781118557921.ch24
Impact of Workpiece Shape Deviations in Coordinate Metrology
Lanza, G.; Peters, J.
2010. Product Lifecycle Management : Geometric Variations. Ed.: M. Giordano, 405–418, John Wiley and Sons. doi:10.1002/9781118557921.ch23
Surface layer states of worn uncoated and TiN-coated WC/Co-cemented carbide cutting tools after dry plain turning of carbon steel
Kümmel, J.; Poser, K.; Zanger, F.; Michna, J.; Schulze, V.
2013. Advances in Tribology, 2, 519686/1–10. doi:10.1155/2013/519686
Inluence of cutting parameters, tool coatings and friction on the process heat in cutting processes and phase transformations in workpiece surface layers
Schulze, V.; Michna, J.; Zanger, F.; Faltin, C.; Maas, U.; Schneider, J.
2013. HTM - Journal of Heat Treatment and Materials, 68 (1), 22–31
Technology selection for electric drive production with a game theoretic approach
Lanza, G.; Stoll, J.; Gerbe, S.
2013. Advanced materials research, 769, 303–310. doi:10.4028/www.scientific.net/AMR.769.303
Flexible Montage leichter Rahmenstrukturen
Fleischer, J.; Lanza, G.; Otter, M.; Elser, J.
2013. VDI-Z integrierte Produktion, 2013 (6), 28–30
Preforming von CFK-Halbzeugen im Spannungsfeld der Stückzahl - Effiziente Herstellung von Preforms mit endkonturnaher Geometrie
Wagner, H.; Brabandt, D.; Lanza, G.; Fleischer, J.
2013. VDI-Z integrierte Produktion, 6, 64–66
Maschinenkomponenten mit adaptierbarer Eigenfrequenz
Koch, S.-F.; Bauer, J.; Horsch, J.; Wagner, H.; Fleischer, J.
2013. ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb, 108 (7-8), 487–491
CFK als "Enabler" im Werkzeugmaschinenbau
Fleischer, J.; Bauer, J.; Koch, S.-F.; Wagner, H.
2013. VDI-Z integrierte Produktion, 8 (7), 74–76
Method to compensate production related deviations for the assembly of space-frame-structures
Fleischer, J.; Otter, M.; Beuke, F.
2013. Production Engineering, 8 (1-2), 206–217. doi:10.1007/s11740-013-0501-3
Alternative Regelstrategien für Vorschubachsen
Fleischer, J.; Sell-Le Blanc, F.; Baumeister, M.; Spohrer, A.; Lütticken, F.; Hennrich, H.
2014. VDI-Z integrierte Produktion, 156 (1/2), 43–45
Automated Modular Part-flexible Feeding System for Micro Parts
Leberle, U.; Fleischer, J.
2013. Proceedings of the 13th euspen International Conference, 27.05.2013 - 31.05.2013, Berlin, Deutschland, 27–29, European Society for Precision Engineering and Nanotechnology (euspen)
Automatische Herstellung von Preforms für schalenförmige CFK-Bauteile durch Anwendung einer featurebasierten Technologieplanung
Fleischer, J.; Wagner, H.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03.07.2013 - 05.07.2013, Karlsruhe, Deutschland. Hrsg.: A. Wanner, 944–959
Analysis of the influence of assembly force on joint strength during MIM sinter joining
Klimscha, K.; Fleischer, J.
2013. EURO PM2013 congress & exibition, 15.-18.09.2013, Gothenburg, Sweden, European Powder Metallurgy Association, 311–316
Automatisiertes MIM-Sinterfügen - Potentiale in der Mikroproduktion
Klimscha, K.; Fleischer, J.
2013. 6. Kolloquium Mikroproduktion Braunschweig 8. Oktober 2013. Hrsg.: Rainer Tutsch, 33, Shaker Verlag
Material based process model for linear noncircular coil winding processes with large wire gauge: Investigation of wire material influences on the winding process and compensation approaches
Sell-Le Blanc, F.; Ruprecht, E.; Fleischer, J.
2013. Electric Drives Production Conference (EDPC), 2013 3rd International, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689731
Experimental Investigation of Metal Inserts Embedded in Composite Parts Manufactured by the RTM Process
Fleischer, J.; Gebhardt, J.
2013. 13th Japan International SAMPE Symposium and Exhibition, 11.11.-13.11.2013, Nagoya, Japan, A Great Bridge from Practice and high Volume to Science and high Performance, 1–6
Roadmap zur Standardisierung von Produkt- und Produktionsmerkmalen des elektrischen Antriebsstranges
Sell-Le Blanc, F.; Ruprecht, E.; Doppelbauer, M.; Fleischer, J.
2013. FVA-Informationstagung, 26-27.11.2013, Würzburg, Deutschland, FVA-Forschungsreport 2013
Life Cycle Performance 4.0 - Strategische und technische Lösungen für den intelligenten Betrieb von Maschinen und Anlagen
Fleischer, J.; Lanza, G.; Appel, D.; Stricker, N.; Hennrich, H.; Herder, S.
2013. wt Werkstattstechnik online, 103 (2), 124–129
Joining automotive space frame structures by filament winding
Fleischer, J.; Schaedel, J.
2013. CIRP Journal of Manufacturing Science and Technology, 6 (2), 98–101. doi:10.1016/j.cirpj.2013.02.003
Planar positioning stage for micro machining
Bauer, J.; Kern, D.; Ayhan, S.; Scherr, S.; Fleischer, J.; Seemann, W.; Zwick, T.
2013. Production Engineering, 7 (5), 511–516. doi:10.1007/s11740-013-0474-2
Handhaben von Batteriezellen
Fleischer, J.; Ruprecht, E.; Haag, S.
2013. wt Werkstattstechnik online, 9, 644–648
Intelligenter piezoelektrischer phasenflexibler Schwingförderer
Fleischer, J.; Leberle, U.
2013. Konstruktion, 65 (10), 91–95
Robotergestütztes Führen von Strangpressprofilen
Fleischer, J.; Dosch, S.
2013. Werkstattstechnik, 9, 693–698
Automated Modular and Part-Flexible Feeding System for Micro Parts
Leberle, U.; Fleischer, J.
2014. International journal of automation technology, 8 (2), 282–290
Simulation of the manufacturing process of case-hardened powder metallurgical components: carburizing simulation
Nusskern, P.; Hoffmeister, J.; Schulze, V.
2014. Advanced Engineering Materials, 16 (2), 147–150. doi:10.1002/adem.201300101
High Speed Broaching of Case Hardening Steel SAE 5120
Schulze, V.; Meier, H.; Strauss, T.; Gibmeier, J.
2012. Procedia CIRP, 1 (2012), 431–436. doi:10.1016/j.procir.2012.04.077
Support for Micro-Tolerancing through the Feedback of Existing Quality-Related Data to Product Developers
Lanza, G.; Albers, A.; Kippenbrock, K.; Börsting, P.
2011. Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011. Ed.: H. Spaan, 542–545, European Society for Precision Engineering and Nanotechnology (euspen)
Finite element modelling of coverage effects during shot peening of IN718
Zimmermann, M.; Schulze, V.; Hoffmeister, J.
2010. International Journal of Materials Research, 101 (8), 951–962. doi:10.3139/146.110375
Microstructure and mechanical properties of micro tensile specimens made of CuAl10Ni5Fe4 produced by micro casting
Rögner, J.; Lang, K.-H.; Baumeister, G.; Schulze, V.
2011. Microsystem Technologies, 17 (2), 301–311. doi:10.1007/s00542-011-1234-x
Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut
Cuba Ramos, A.; Autenrieth, H.; Strauß, T.; Deuchert, M.; Hoffmeister, J.; Schulze, V.
2011. Journal of Materials Processing Technology, 212 (3), 594–600. doi:10.1016/j.jmatprotec.2011.07.007
Investigations on the Cyclic Crack Growth Behaviour of Spring Steel Wire Reinforced EN AW-6082
Merzkirch, M.; Weidenmann, K. A.; Schulze, V.
2011. EPD Congress 2011. Ed.: S. N. Monteiro, 135–142, John Wiley and Sons. doi:10.1002/9781118495285.ch17
Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
Hoffmeister, J.; Schulze, V.; Hessert, R.; Koenig, G.
2012. International Journal of Materials Research, 2012 (1), 66–72. doi:10.3139/146.110630
Compensation of shape deviations for the automated assembly of space frame structures
Fleischer, J.; Ochs, A.; Koch, S. F.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 105–108, University of Michigan
Ultrasonic-assisted adhesive handling of limp and air-permeable textile semi-finished products in composites manufacturing
Fleischer, J.; Ochs, A.; Koch, S. F.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 7–10, University of Michigan
Spatial alignment of joining partners without fixtures, based on component-inherent markings
Fleischer, J.; Elser, J.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 17–20, University of Michigan
Funktionsorientierte Bewertung bei der Druckwalzenherstellung
Tillmann, A.; Weckenmann, A.; Hartmann, W.; Schmidt, H.; Schulze, V.; Stockey, S.; Chlipala, M.
2012. Merkmalbasiert geregelte Fertigungsprozesse für die beherrschte Herstellung funktionaler Produkteigenschaften von mikrostrukturierten Bauteilen: Ergebnisbericht des BMBF Verbundprojektes FunkProMikro. Hrsg.: T. Wiedenhöfer, 57–76, Apprimus
Funktionsorientierte Bewertung und deren Nutzen für die Kurbelwellenfertigung
Zimmermann, W.; Holdik, K.; Happek, B.; Schreiber, L.; Weber, M.; Weckenmann, A.; Hartmann, W.; Schmidt, H.; Schulze, V.; Chlipala, M.; Stockey, S.; Pabst, R.
2012. Merkmalbasiert geregelte Fertigungsprozesse für die beherrschte Herstellung funktionaler Produkteigenschaften von mikrostrukturierten Bauteilen. Hrsg.: T. Wiedenhöfer, 17–38, Apprimus Wissenschaftsverlag
Produkte und Produktionssysteme integrativ konzipieren : Modellbildung und Analyse in der frühen Phase der Produktentstehung
Behmann, B.; Rühl, J.; Brandis, R.; Deppe, U.; Dorociak, R.; Eckstein, J.; Günther, T.; Hellenbrand, D.; Herm, M.; Herrmann, H.-G.; Kissel, M.; Mörtl, M.; Mülder, A.; Nordsiek, D.; Nyßen, A.; Olbrich, R.; Peters, S.; Schullerus, W.; Stollt, G.; Terfloth, A.
2012. (J. Gausemeier, G. Lanza & U. Lindemann, Eds.), Carl Hanser Verlag. doi:10.3139/9783446429857
Handlungsempfehlung zur Gestaltung globaler Produktionsnetzwerke
Book, J.; Bunse, K.; Grauer, M.; Klemke, T.; Tilgner, K.; Ude, J.
2012. Strategien und nachhaltige Wirtschaftlichkeit in der Fabrikplanung : Standorte gezielt auswählen, Investitionen sicher planen, 1–71, Beuth Verlag GmbH
Prozessübergreifende Abtragregelung für die Mikrobahnerosion durch die Nutzung konfokaler Weißlichtsensorik
Schulze, V.; Ruhs, C.
2012. Jahrbuch Optik und Feinmechanik, 239–245, OPTIK-Verl
Produktanpassungen an regionale Bedingungen
Ruhrmann, S.
2012. China - erfolgreiche Beschaffungs- und Produktionsstrategien. Hrsg.: J. Fleischer, 78–92, Shaker Verlag
Wissenstransfer technischer Dienstleistungen im Maschinenbau - Projekt WiTal
Lanza, G.; Appel, D.; Behmann, B.
2012. IHK Magazin Nordschwarzwald, 2 (1/2), 54–55
Strategien zur Bewältigung volatiler Absatzmärkte: Investitions- und Kapazitätsplanung in der mittelständischen Automobilindustrie
Lanza, G.; Peters, S.; Schmollinger, S.; Günther, T.
2012. VDI-Z integrierte Produktion, 154 (3), 59–62
Integrated capacity planning over highly volatile horizons
Lanza, G.; Peters, S.
2012. CIRP Annals - Manufacturing Technology, 61 (1), 395–398. doi:10.1016/j.cirp.2012.03.057
Hybride Modellierung zur Auslegung und Leistungsmessung in Produktionssystemen
Stoll, J.; Özden, E.; Jondral, A.; Furmans, K.; Lanza, G.
2012. wt Werkstattstechnik online, 102 (4), 217–221
Impact of green machining strategies on achieved surface quality
Helu, M.; Behmann, B.; Meier, H.; Dornfeld, D.; Lanza, G.; Schulze, V.
2012. CIRP annals, manufacturing technology, 61 (1), 55–58. doi:10.1016/j.cirp.2012.03.092
Methodik für qualitätsoptimale globale Beschaffung
Lanza, G.; Ruhrmann, S.; Jondral, A.
2012. Qualität und Zuverlässigkeit, 6 (6), 58–59
Adaptronical compensation of geometrical machine errors
Fleischer, J.; Munzinger, C.; Weis, M.; Herder, S.
2012. Production Engineering, 6 (3), 303–309. doi:10.1007/s11740-012-0381-y
Life Cycle Performance in der Produktionstechnik: Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz = Life cycle performance in manufacturing
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7/8), 513–517
Dynamic optimization of manufacturing systems in automotive industries
Lanza, G.; Peters, S.; Herrmann, H.-G.
2012. CIRP journal of manufacturing science and technology, 5 (4), 235–240. doi:10.1016/j.cirpj.2012.09.002
Klein, aber fein
Fleischer, J.; Bauer, J.
2012. O + P, (1-2), 21–23
Produktionstechnische Herausforderungen der Elektromobilität
Fleischer, J.; Lanza, G.; Schulze, V.; Sauer, A.; Sell-Le Blanc, F.
2012. VDI-Z integrierte Produktion, 154 (1-2), 16
Produktionstechnische Handlungsbedarfe der Batteriemodulfertigung
Fleischer, J.; Ruprecht, E.; Haag, S.
2012. ZWF, 107 (9), 637–641
Entwicklung von hochbelastbaren Krafteinleitungselementen für den hybriden Leichtbau
Fleischer, J.; Elser, J.; Gebhardt, J.; Weingärtner, T.
2012. Lightweight design, 5 (5), 32–37. doi:10.1365/s35725-012-0020-8
Antriebsmodul für die Mikrobearbeitung - Parallelkinematisches hydraulisches Antriebsmodul mit Radarpositionsmessung
Fleischer, J.; Seemann, W.; Zwick, T.; Ayhan, S.; Bauer, J.; Kern, D.; Scherr, D.
2012. wt Werkstattstechnik online, 102 (11/12), 724–729
Fräsen mit flüssigem Stickstoff als Kühlmedium
Schulze, V.; Michna, J.; Meier, H.; Pabst, R.; Watts, D.; Lang, H.
2012. wt Werkstattstechnik online, 102 (1/2), 52–55
Increase of process reliability in the micro-machining processes EDM-milling and laser ablation using on-machine sensors
Schulze, V.; Weber, P.; Ruhs, C.
2012. Journal of Materials Processing Technology, 212 (3), 625–632. doi:10.1016/j.jmatprotec.2011.09.014
Analysis of surface layer characteristics for sequential cutting operations
Schulze, V.; Osterried, J.; Strauß, T.; Zanger, F.
2012. HTM Journal of heat treatment and materials, 67 (6), 347–356
A structured approach to integrate MEMS and Precision Engineering methods
Schlipf, M.; Bathurst, S.; Kippenbrock, K.; Kim, S.-G.; Lanza, G.
2010. CIRP journal of manufacturing science and technology, 3 (3), 236–247. doi:10.1016/j.cirpj.2010.12.002
Assessment of flexible quantities and product variants in production
Lanza, G.; Peter, K.; Rühl, J.; Peters, S.
2010. CIRP journal of manufacturing science and technology, 3 (4), 279–284. doi:10.1016/j.cirpj.2011.01.002
Company-specific quantitative evaluation of lean production methods
Peter, K.; Lanza, G.
2011. Production engineering, 5 (1), 81–87. doi:10.1007/s11740-010-0276-8
Prognose des Driftverhaltens getakteter Montagelinien
Gans, J.-E.; Lanza, G.; Müller, R.; Peters, S.; Schoen, L.
2011. wt Werkstattstechnik online, 101 (3), 162–166
Supply Chain Risk Management
Ender, M.; Lanza, G.; Nissen, J.
2011. Risk, compliance & audit, (5), 28–31
Systematisch zum wandlungsfähigen globalen Wertschöpfungsnetzwerk
Lanza, G.; Moser, R.; Ruhrmann, S.; Peter, K.
2011. wt Werkstattstechnik online, 101 (4), 206–209
Global Procurement Guide - Ein Leitfaden für globale Beschaffungsaktivitäten in kleinen und mittelständischen Unternehmen
Lanza, G.; Ruhrmann, S.; Jondral, A.; Bensing, J.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, (5), 291–294
Planung und Optimierung wandlungsfähiger globaler Wertschöpfungsnetzwerke
Lanza, G.; Moser, R.; Scholz-Reiter, B.; Özsahin, M.-E.; Schuhkraft, S.; Meil, P.; Rasp, F.
2011. Industrie-Management, (3), 57–60
Effizienzsteigerung von Produktionssystemen
Lanza, G.; Peters, S.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (6), 418–422
Hybrides Planungswerkzeug zur adaptiven Auslegung von Lean-Methoden
Spath, D.; Korge, A.; Krause, T.; Lanza, G.; Jondral, A.; Moser, R.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 106 (6), 413–417
Auswirkungen neuer Mobilitätsformen auf die Produktion
Lanza, G.; Peters, S.; Stockey, S.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (5), 357–360
Erfolgsfaktoren beim Einsatz von Lean-Methoden
Lanza, G.; Jondral, A.; Moser, R.; Kübler, L.
2011. Productivity Management, 16 (3), 36–39
Supply chain design for the global expansion of manufacturing capacity in emerging markets
Weiler, S.; Páez, D.; Chun, J.-H.; Graves, S.; Lanza, G.
2011. CIRP journal of manufacturing science and technology, 4 (3), 265 – 280. doi:10.1016/j.cirpj.2011.06.012
Research into production technology
Lanza, G.; Ruhrmann, S.
2011. Public service review: European science & technology, (11), 92–93
Qualitätsprobleme im Ursprung beheben
Lanza, G.; Ender, T.; Book, J.; Jondral, A.
2011. Beschaffung aktuell, (11), 20–22
Beherrschung der Qualitätssicherung im Wertschöpfungsnetzwerk
Lanza, G.; Book, J.; Enz, T.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (12), 928–933. doi:10.3139/104.110658
Nachhaltige und umfassende Lieferantenentwicklung in China - Teil 2 - Schluss mit hohen Beständen
Lanza, G.; Ender, T.; Book, J.; Jondral, A.
2011. Beschaffung aktuell, 2011 (12), 22–23
Mit Methode investiert -Life Cycle Performance
Lanza, G.; Behmann, B.; Appel, D.
2011. VDMA-Nachrichten, 90 (12), 16–17
Erfolgsfaktor Servicedaten
Lanza, G.; Stengele, G.; Appel, D.; Behmann, B.
2011. VDMA-Nachrichten, 90 (12), 18–19
Schnittstellenbaukasten für die aufwandsarme Montage und Justage von Modulen
Abele, E.; Korff, D.; Munzinger, C.; Hennrich, H.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 2011 (4), 255–260
The development of two-component micro powder injection moulding and sinter joining
Ruh, A.; Klimscha, K.; Piotter, V.; Plewa, K.; Ritzhau, H.-J.; Fleischer, J.
2011. Microsystem technologies, 17 (10-11), 1547–1556. doi:10.1007/s00542-011-1326-7
Bauteilflexibles Zuführsystem - Piezoelektrisches modulares Schwingfördersystem für eine flexible Teilezuführung in der automatisierten Montage
Fleischer, J.; Leberle, U.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011 (7-8), 548–522
Automatisierte Kleinserienmontage von Rahmenstrukturen
Fleischer, J.; Lanza, G.; Elser, J.; Otter, M.
2011. VDI-Z integrierte Produktion, 153 (9), 99–101
Advanced manufacturing and design techniques for lightweight structures
Both, J.; Brüggemann, T.; Dosch, S.; Elser, J.; Kronthaler, M.; Morasch, A.; Otter, M.; Pietzka, D.; Selvaggio, A.; Weddeling, C.; Wehrle, E.; Wirth, F.; Baier, H.; Biermann, D.; Brosius, A.; Fleischer, J.; Lanza, G.; Schulze, V.; Tekkaya, A.; Zabel, A.; Zäh, M.
2011. International aluminium journal, 87 (9), 60–63
Breite Abdeckung von FVK-Verbindungen mit wenigen Verfahren
Fleischer, J.; Elser, J.; Schädel, J.; Ochs, A.
2011. Maschinenmarkt, 10, 26–29
Erfolgsfaktor Leichtbau: Systemeffiziente hybride Lösungen sind gefragt!
Fleischer, J.; Ochs, A.; Dosch, S.
2011. ZfAW, 14 (4), 28–33
Specific machining forces and resultant force vectors for machining of reinforced plastics
Schulze, V.; Becke, C.; Pabst, R.
2011. CIRP Annals - Manufacturing Technology, 60 (1), 69–72. doi:10.1016/j.cirp.2011.03.085
Abtragregelung der Mikroerosion maximiert die Genauigkeit
Schulze, V.; Ruhs, C.
2011. Maschinenmarkt, 117 (36), 116–119
Prozesskette zur Herstellung schichtbasierter Systeme mit integrierten Kavitäten. PhD dissertation
Ruprecht, E. M. R.
2012. Shaker Verlag
Nutzen- und Kostenprognose hybrider Produkte mittels einer Simulation der Ausfall- und Servicekosten
Lanza, G.; Behmann, B.; Niggeschmidt, S.
2009. Kooperative Geschäftsmodelle zur Integration von Sach- und Dienstleistung. Hrsg.: H. Meier, 52–72, VDMA Verlag
Quality Assurance of Micro-gears via 3D Surface Characterization
Lanza, G.; Viering, B.
2010. Product lifecycle management: geometric variations. Ed.: M. Giordano, 419–429, John Wiley and Sons
Vergleich von Verfahren zur Geometriebestimmung in der Mikrotechnik
Krah, T.; Horn, F.; Patzelt, S.; Schrader, C.; Schulze, M.; Shaw, L.; Tausendfreund, A.; Viering, B.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 234–249, Shaker Verlag
Bestimmung der Messunsicherheit in Mikrometer Bereich - Strategien, Modelle und Einflussfaktoren
Tan, Ö.; Krah, T.; Neuschaefer-Rube, U.; Ehrig, W.; Viering, B.; Herffurth, T.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 188–205, Shaker Verlag
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 5–18, Shaker Verlag
Experimentelle Messunsicherheitsbestimmung bei Mikroverzahnungsmessungen
Lanza, G.; Viering, B.; Härtig, F.
2011. Messunsicherheit praxisgerecht bestimmen, Erfurt, 8.-9. November 2011, 29–38, VDI Verlag
Fliegendes Abtrennen
Munzinger, C.; Fleischer, J.; Köhler, G.; Schneider, M.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 65–84, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Munzinger, C.; Schmidt-Ewig, J.-P.; Ochs, A.; Gerbracht, T.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 295–316, VDI Verlag
Flexible und intelligente Greiftechnik
Lanza, G.; Munzinger, C.; Fleischer, J.; Ruch, D.; Elser, J.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 275–294, VDI Verlag
Projektvorstellung und Einleitung
Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 1–8, Apprimus Wissenschaftsverlag
Analyse des Ausfallverhaltens von Werkzeugmaschinen
Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 9–16, Apprimus Wissenschaftsverlag
Ermittlung der Komponentenbelastung für die Lebensdauerprognose
Broos, A.; Munzinger, C.; Walther, M.; Laptev, I.; Verl, A.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 17–36, Apprimus-Verl
Zustandsüberwachung von Komponenten der Lineartechnik
Rossteuscher, H.; Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 69–84, Apprimus-Verl
Ausfallkosten und Entwicklung neuer Dienstleistungen
Schopp, M.; Munzinger, C.; Wieschollek, M.; Forkert, T.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 135–154, Apprimus-Verl
Component-specific scale for inline quality assurance of spatially curved extrusion profiles
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.
2010. Production engineering, 4 (2), 193–201. doi:10.1007/s11740-010-0209-6
Flexible und intelligente Greiftechnik
Lanza, G.; Fleischer, J.; Munzinger, C.; Elser, J.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 339–362, VDI Verlag
Genauigkeitssteigerung der Profilherstellung durch fliegendes Abtrennen während des Rundens beim Strangpressen
Schneider, M.; Köhler, G.; Fleischer, J.; Munzinger, C.; Schulze, V.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 73–100, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 363–386, VDI Verlag
Adaptronische hydrostatische Drucktascheneinheit auf Basis neuer Aktoren für aktive Führungssysteme
Munzinger, C.; Weis, M.; Herder, S.
2011. Adaptronik für Werkzeugmaschinen: Forschung in Deutschland. Hrsg.: J. Hesselbach, 446–462, Shaker Verlag
Trennen von metallischen Leichtbauwerkstoffen
Schulze, V.; Michna, J.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 531–553, Carl Hanser Verlag
Flexible und intelligente Greiftechnik
Fleischer, J.; Kies, S.; Ruch, D.
2004. Aluminium, 80 (12), 1421–1424
Kombination der abtragenden Verfahren Funkenerosion und Laserablation zur Mikrostrukturierung
Fleischer, J.; Schmidt, J.; Haupt, S.
2005. Kolloquium Mikroproduktion: Fortschritte, Verfahren, Anwendungen. Hrsg.: U. Dilthey, 177–185, Mainz
Werkzeug- und Prozesskenngrößen zum Trocken-Räumen
Fleischer, J.; Lang, H.
2005. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: K. Weinert, 51–58, Vulkan-Verlag
Automation of the Powder Injection Molding Process
Weule, H.; Fleischer, J.; Buchholz, C.
2005. Microengineering of Metals and Ceramics. Part II: Special Replication Techniques, Automation, and Properties. Ed.: D. Löhe, 451–474, Wiley-VCH Verlag
Quality Assurance and Dimensional Measurement Technology
Fleischer, J.; Behrens, I.
2005. Microengineering of Metals and Ceramics. Part II: Special Replication Techniques, Automation, and Properties. Ed.: D. Löhe, 499–519, Wiley-VCH Verlag
3D-Laser Processing of Spatially Curved Profiles
Fleischer, J.; Kies, S.; Munzinger, C.; Rilli, R.
2006. Flexible manufacture of lightweight frame structures: Proceedings. Ed.: K. Weinert, 43–52, Trans Tech
Identifying availability contribution of lifecycle-adapted services
Fleischer, J.; Nesges, D.
2006. Innovation in Life Cycle Engineering and Sustainable Development. Ed.: D. Brissaud, 209–222, Springer Netherlands
Flying Cutting of Spatially Curved Extrusion Profiles
Munzinger, C.; Fleischer, J.; Stengel, G.
2006. Flexible manufacture of lightweight frame structures: Proceedings. Ed.: K. Weinert, 35–42, Trans Tech
Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS)
Fleischer, J.; Nyhuis, P.; Schuh, G.; Serwotka, H. (Eds.)
2007. VDMA Verlag
Diagnosemöglichkeiten im Produktionsanlauf
Ordenewitz, R.; Schopp, M.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 28–43, VDMA Verlag
Sustainable Machine Tool Reliability based on Condition Diagnosis and Prognosis
Fleischer, J.; Schopp, M.
2007. Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 323–328, Springer
Fliegendes Abtrennen
Fleischer, J.; Munzinger, C.; Stengel, G.; Schneider, M.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 107–130, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Schmidt-Ewig, J. P.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 397–423, VDI Verlag
Flexible und intelligente Greiftechnik
Lanza, G.; Fleischer, J.; Ruch, D.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 371–396, VDI Verlag
Adaptronische hydrostatische Drucktascheneinheit auf Basis neuer Aktoren für aktive Führungssysteme
Munzinger, C.; Knödel, A.; Herder, S.; Weis, M.
2007. Bericht zum 2. Berichtskolloquium des DFG SPP 1156 Adaptronik für Werkzeugmaschinen, Braunschweig, 15. Februar 2007, 321–322, Braunschweig
A concept for the configuration of Value Added Networks based on quality capabilities during ramp-up
Lanza, G.; Ude, J.
2007. Digital Enterprise Technology: Perspectives and Future Challenges. Ed.: P. F. Cunha, 393–400, Springer US
Prognosemöglichkeiten im Produktionsanlauf
Ender, T.; Heins, M.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 44–68, VDMA Verlag
ProactAS - Die Idee
Lanza, G.; Ender, T.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 1–10, VDMA Verlag
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland. Hrsg.: U. Heisel, 97–117, Shaker Verlag
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Begleitband zum Fachgespräch Zerspanen im Modernen Produktionsprozess, Dortmund, 26.-27. Februar 2008, 233–243, ISF
Potenziale zur Genauigkeitssteigerung durch die direkte Wegmessung bei Parallelkinematiken
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland. Hrsg.: U. Heisel, 261–278, Shaker Verlag
Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. Manufacturing systems and technologies for the new frontier: The 41st CIRP Conference on Manufacturing Systems, Tokyo, Japan, May 26 - 28, 2008. Ed.: M. Mitsuishi, 173–176, Springer
Efficient Maintenance of Machine Tools - Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. Manufacturing systems and technologies for the new frontier: The 41st CIRP Conference on Manufacturing Systems, Tokyo, Japan, May 26 - 28, 2008. Ed.: M. Mitsuishi, 69–74, Springer
Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008
Lanza, G.; Munzinger, C.; Schulze, V.
2008. (H. Weule, Ed.), Shaker Verlag
Intelligente Komponenten zur Steigerung der Life-Cycle-Performance
Werner, P.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 102–113, Shaker Verlag
Aktuelle Trends im Bereich Life-Cycle-Performance
Lanza, G.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 1–15, Shaker Verlag
Instandhaltungsfreundliche Werkzeugmaschine
Gaukler, W.; Hennrich, H.; Wieser, J.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 82–101, Shaker Verlag
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: K. Weinert, 530–541, Vulkan-Verlag
Examination of component state changes caused by machining with multiedged tools for the example of broaching
Schulze, V.; Pabst, R.; Osterried, J.
2012. Proceedings of the Summer School 2011. Graduate School 1483. Process Chains in Production: Interaction, Modelling and Assessment of Process Zones. Ed.: R. Pabst, 43–46, KIT Scientific Publishing
Influence of broaching for evaluation of process chains
Schulze, V.; Pabst, R.; Meier, H.
2012. Proceedings of the Summer School 2011. Graduate School 1483. Process Chains in Production: Interaction, Modelling and Assessment of Process Zones. Ed.: R. Pabst, 29–32, KIT Scientific Publishing
Validierung von Mikrokomponenten und -systemen durch Simulationen und Prüfstandsversuche
Albers, A.; Lanza, G.; Turki, T.; Hoppen, P.; Troll, D.; Kippenbrock, K.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 97–104, KIT Scientific Publishing
2-Komponenten-Spritzguss und Sinterfügen - Potentiale in der Mikroproduktion
Fleischer, J.; Klimscha, K.; Ruh, A.; Piotter, V.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 83–90, KIT Scientific Publishing
Fertigungstechnologien zur Erzeugung hochgenauer Mikrostrukturen und Oberflächen
Schulze, V.; Deuchert, M.; Ruhs, C.; Weber, P.; Weingärtner, R.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 65–74, KIT Scientific Publishing
Modellierung und experimentelle Untersuchungen von Größeneffekten beim Stirndrehen von 90MnCrV8 in vergütetem Zustand
Kotschenreuther, J.; Delonnoy, L.; Hochrainer, T.; Weber, M.; Schmidt, J.; Fleischer, J.; Schulze, V.; Löhe, D.; Gumbsch, P.
2005. Prozessskalierung: Tagungsband des 2. Kolloquiums Prozessskalierung im Rahmen des DFG-Schwerpunktprogramms Prozessskalierung, Bremen, 9. - 10. November 2005. Hrsg.: F. Vollertsen, 219–240, Verlag BIAS
On the relationship between microcasting process, material states and mechanical properties in the gold alloy Stabilor® G
Kasanická, B.; Okolo, B.; Baumeister, G.; Auhorn, M.; Beck, T.; Wanner, A.; Haußelt, J.; Löhe, D.; Schulze, V.
2009. Materials science and engineering / A, 501 (1/2), 70–80. doi:10.1016/j.msea.2008.09.070
Spectral correlation of partially or fully developed Speckle patterns generated by rough surfaces
Fleischer, J.; Ruffing, B.
1985. Journal of the Optical Society of America A, 2 (10), 1637–1643
Automatisiertes Zuschneiden von Faserverbund-Halbzeugen
Weule, H.; Fleischer, J.; Enderle, W.
1986. wt-Z. in der Fertigung, 76, 361–364
Rechnerintegrierte Fertigung von Abkantteilen
Weule, H.; Fleischer, J.
1988. VDI-Z Integrierte Produktion, 130 (9), 101–106
Trend zur Hochgeschwindigkeit und Präzision. 15. JIMTOF in Osaka
Fleischer, J.
1991. wt Werkstattstechnik online, 81, 11–12
Mit neuer Organisation fit ins Jahr 2000 ...
Spath, D.; Matt, D.; Werner, B.
1995. Karlsruher Transfer, 9 (16), 12–13
Information management to support economical disassembly of technical products aus
Spath, D.; Tritsch, C.
1995. Life cycle modelling for innovative products and processes - Proceedings for the IFIP WG5.3 International Conference on Life-cycle Modelling for Innovative Products and Processes, Berlin, Germany, November/December 1995. Ed.:. F.-L. Krause, 246–255, Chapman & Hall
Kinematics, Frictional Characteristics and Wear Reduction by PVD Coating on Ball Screw Drives
Spath, D.; Haberkern, A.; Rosum, J.
1995. CIRP Annals - Manufacturing Technology, 44 (1), 349–352
Prüfpläne und Prüfzeichnungen automatisch in CAD-Systemen erstellen
Burghardt, J.; Spath, D.; Uhlig, A.; Vossmann, D.
1995. Qualität und Zuverlässigkeit, 40, 6
Elektronisches QM -Handbuch
Spath, D.; Vossmann, D.
1996. Qualität und Zuverlässigkeit, 41, 286
Efficient Task Performance by Nomadic-Cooperative Work
Spath, D.; Posur, M.; Selinger, G.
1996. Proceedings / Telematics in a multimedia environment: Euromedia ’96, London, United Kingdom, December 19 - 21, 1996. Ed.: A. Verbraeck, 247–256, SCS
Virtual Reality - An approach to improve the Generation of Fault-Free Software for Programmable Logic Controllers (PLC)
Spath, D.; Osmers, U.
1996. Proceedings / Second IEEE International Conference on Engineering of Complex Computer Systems, Montreal, Quebec, Canada, October 21 - 25, 1996, 43–46, IEEE Computer Society
Qualitätsmanagement rund um das Produkt - Automatische Erstellung von Prüfplänen und Prüfzeichnungen
Spath, D.; Uhlig, A.; Vossmann, D.
1997. Qualität und Zuverlässigkeit, 42, 276
Prozeßorientierte Kostenschätzung in der Konstruktion durch Nutzung informationslogistischer Konzepte
Spath, D.; Trender, L.; Lanza, M.
1997. Industrie Management, 13 (E), E38
Using new techniques for Gaining monitoring knowledge
Spath, D.; Kafka, C.
1997. Production Engineering - Research and development in Germany. Annals of the German Academic Society for Production Engineering, 4
Trockenzerspanung mittels PVD-beschichteter Werkzeuge
Dörfel, O.
1997. Vorträge und Poster / Kolloquium Schmiermittelarme Fertigung und Anwendungen, Düsseldorf, 22. Januar 1997. Ed.: R. Spitzl, Düsseldorf
Applicabiltiy of different hard coating in dry milling aluminium alloys
Doerfel, O.
1997. Surface and Coatings Technology, 91 (1-2), 116–121
Schritt für Schritt zum Erfolg-Produktivitätsorientierte Neugestaltung unternehmensinterner Dienstleistungen
Spath, D.; Matt, D.
1997. AV - Industrielle Informationstechnik, 34 (5), 326–328
Hochdynamische Vorschubachse mit Kugelgewindebetrieb
Weule, H.; Frank, T.; Tilch, D.
1997. wt Werkstattstechnik online, 87 (9/10), 433–436
Beschreibung von Bearbeitungsaufgaben durch Objekte
Schmidt, J.; Fleissner, F.; Spath, D.; Walter, W.
1997. Technische Rundschau, 89 (18), 12–17
Multi-Agenten-Systeme in der Fertigungsplanung
Stiefbold, O.
1997. wt Werkstattstechnik online
Demontage mit Wasserstrahlrobotik
Klimmek, M.; Spath, D.
1997. Schweizerische technische Zeitschrift, 94 (3), 28–31
Brauchen wir die informelle Kommunikation?
Spath, D.; Bungard, W.; Bismarck, W.-B. von; Selinger, G.
1997. Mannheimer Beiträge zur Wirtschafts- und Organisationspsychologie, (2), 26–31
Bevorratungsfreie Großgerätemontage
Spath, D.; Lotter, B.; Klimmek, M.; Hartel, M.
1997. STZ Schweizer Technische Zeitung, 94 (3), 34–37
Anthropomorphe Greifer für Industrieroboter
Tilch, D.; Geisinger, D.
1997. Maschinenmarkt, 103 (20), 38–41
Dynamic Process and Structure Innovation
Spath, D.; Matt, D.; Selinger, G.
1997. Construction process re-engineering - Proceedings of the International Conference on Construction Process Re-engineering, Queensland, Australia, 14-15 July 1997. Ed.: S. Mohamed, Griffith University
Concept of a robot for interior building trades by the example of wall slits in masonry
Andres, J.; Spath, D.
1997. Automation in Construction, 6 (3), 205–214
Robot systems for residential Building construction Integration and Operation
Spath, D.; Andres, J.; Schmidt, J.
1997. Proceedings of the Fourteenth International Symposium on Automation and Robotics in Construction, June 8-11, 1997, Pittsburgh, Pennsylvania, 185–197, Pittsburgh
Zahnräder wälzstoßen ohne Kühlschmierstoff
Doerfel, O.; Schmidt, J.
1997. Maschinenmarkt, 103 (29), 26–29
Umweltmanagement - eine Chance fuer Unternehmen?
Schmidt, J.; Hüntrup, V.; Krolle, A.
1997. Qualität und Zuverlässigkeit, 42 (7), 765–769
Integration of Operator’s Experience into NC Manufacturing
Spath, D.; Schulz, H.
1997. CIRP Annals - Manufacturing Technology, 46 (1), 415–418
Customer oriented Planning and Control for Production
Spath, D.; Riedmiller, S.
1997. Facilitating deployment of information and communications technologies for competitive manufacturing - Proceedings of the European Conference on Integration in Manufacturing, Dresden, Germany, 24 - 26 September 1997. Ed.: D. Fichtner, 377–386, Techn. Univ
Abteilungsübergreifendes Projektieren SPS-gesteuerter Produktionsanlagen mit Virtual Reality
Spath, D.; Osmers, U.
1997. Steuerungstechnik: Methodik komplexer Anwendungen; Projektierung - Inbetriebnahme - Betrieb; Manuskripte der Vorträge und Präsentationen zur VDI/VDE-GMA-Fachtagung am 30. Sept. und 1. Okt. 1997 in der Stadthalle in Langen. Hrsg.: W. Kriesel, 25–36, GMA
Marktorientiertes Produkt- und Kostenmanagement. Target Costing- ein Hilfsmittel?
Spath, D.; Riedmiller, S.; Matt, D.
1997. wt Werkstattstechnik online, 87 (11/12), 527–530
Informationssystem zur Unterstützung eines Life Cycle Design
Trender, L.; Spath, D.; Pelz, R.
1997. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 92 (12), 624–626
Supporting Distribution/Marketing by a Learning Expert System
Spath, D.; Kafka, C.
1998. Production Engineering - research and development in Germany / Annals of the WGP, 5
Projektieren Speicherprogrammierbarer Steuerungen mit Virtual Reality
Spath, D.; Osmers, U.
1998. Tagungsband / SPS IPC Drives ’98, Nürnberg, 24. - 26. November 1998. Hrsg.: R. D. Schraft, Hüthig
Advantages and Characteristics of a Dynamic Feeds Axis with Ball Screw Drive and Driven Nut (1)
Weule, H.; Frank, T.
1999. CIRP Annals - Manufacturing Technology, 48 (1), 303–306
Miniaturisierung - eine Herausforderung an die interdisziplinäre Zusammenarbeit
Spath, D.
1999. GIT - Labor-Fachzeitschrift, (6), 569
Product Data Management (PDM) for collaborative Manufacturing System Design
Spath, D.; Lanza, M.
1999. Integration of process knowledge into design support systems - Proceedings of the 1999 CIRP International Design Seminar, Enschede, The Netherlands, 24 - 26 March 1999. Ed.: H. Kals, 173–182, Kluwer
Target oriented Product Data Management
Spath, D.; Sauter, G.; Lanza, M.
1999. Product Data Technology Europe 1999 - Proceedings of the 8th Symposium, Stavanger, Norway, 13th - 16th April 1999, Quality Marketing Services
Kommt der Durchbruch? Marktpotential der Mikrosystemtechnik analysiert
Weule, H.
1999. ke Konstruktion & Engineering, (6), 2
Technologienetz Trockenbearbeitung - Wege zur angewandten Trockenbearbeitung in der Produktion
Schmidt, J.; Hühsam, A.; Dyck, M.
2000. Proceedings / Trockenbearbeitung: Drehen, Fräsen, Bohren, Tagung Dortmund, 29. und 30. März 2000, VDI Verlag
Das Aus für viele Mechanik-Teile
Wengel, J.; Schirrmeister, E.; Demuß, L.
2000. Automobil-Produktion, (2), 48–50
Geschlossene Facility Management Systeme im Anlagenbau
Weule, H.; Buchholz, C.; Schmälzle, A.
2000. Industrie Management, 16 (5), 47–53
Einfluss des Wärmebehandlungszustands auf Mikrozerspanbarkeit von Stählen
Schulze, V.; Peichl, A.; Hüntrup, V.; Spath, D.; Löhe, D.
2000. Härterei-Technische Mitteilungen, 55 (4), 195–204
3-D-Projektierung und Simulation von Ablaufsteuerungen
Spath, D.; Landwehr, R.
2000. wt Werkstattstechnik online, 90 (7/8), 292–296
Mixing head for abrasive-water-jet cutting with an annular driving jet
Weule, H.; Suchy, U.
2000. Proceedings / Papers presented at the 15th International Conference on Jetting Technology, Ronneby, Sweden, 6 - 8 September 2000, 47–56, Professional Engineering Publications
Kap. 4.6.5: Ressourcenschonende Produkte durch Einsatz der Mikrosystemtechnik
Tritschler, H.
2001. Umweltgerechte Produktentwicklung: ein Leitfaden für Entwicklung und Konstruktion. Hrsg.: H. Birkhofer, Beuth Verlag GmbH
Micro-Cutting of Steel to Meet New Requirements in Miniaturization
Weule, H.; Hüntrup, V.; Tritschler, H.
2001. CIRP Annals - Manufacturing Technology, 50 (1), 61–64
Mikrozerspanung mit großen Potenzialen
Schmidt, J.; Tritschler, H.; Hüntrup, V.
2001. WB Werkstatt + Betrieb, 134 (5), 12–18
Kostenoptimierung in einem Unternehmen der Bahnindustrie
Fleischer, J.; Trender, L.
2001. Konstruktion, (7/8), 56–58
Ein Beitrag zur Standardisierung auf Layer 7: Verbesserung der Interoperabilitat von Industrial Ethernet-fahigen Automatisierungskomponenten verschiedener Hersteller mit XML und SOAP
Spath, D.; Landwehr, R.; Gönnheimer, C.
2001. Tagungsband / IT & Automation 2001, Nürnberg, 27. - 29. November 2001, 195–202, VDE Verlag
Skiving for high-performance machining of periodic structures
Spath, D.; Hühsam, A.
2002. CIRP Annals - Manufacturing Technology, 51 (1), 91–94
Marktorientierte Servicekataloge für die Instandhaltung in Betreibermodellen - Best Practices industrieller Dienstleister zur systematischen Gestaltung des Dienstleistungsangebotes
Nesges, D.; Demuß, L.
2002. Bestleistungen in der Instandhaltung - Tagung Lahnstein, 23. und 24. April 2002, 229–246, VDI Verlag
Optimised Design with Topology and Shape Optimisation
Spath, D.; Neithardt, W.; Bangert, C.
2002. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 216 (8), 1187–1191
Improvement of Micro End Milling Tools through Variation of Tool Manufacturing Method and Geometry
Schmidt, J.; Tritschler, H.; Bischoff, L.; Schulz, W.
2002. Proceedings of the International Conference on Micro & Nano Systems 2002 (ICMNS 2002), August 11 - 14, 2002, Kunming, China. Ed.: Y.-P. Zhao, Freund
Ansätze zur flexiblen Automatisierung der Montage mikromechatronischer Systeme
Fleischer, J.; Weule, H.; Stengel, G.; Krahtov, L.
2003. wt Werkstattstechnik online, 93 (9), 586
Factory Planning for Miniaturized Mechatronical Systems
Fleischer, J.; Weule, H.; Blessing, A.; Volkmann, T.
2003. Proceedings / MICRO.tec 2003: Applications - Trends - Visions; 2nd VDE World Microtechnologies Congress, Munich, Germany, October 13-15, 2003, 453–458, VDE Verlag
Characterisation and Testing of Microspecimen
Beck, T.; Schneider, J.; Schulze, V.
2004. Microsystem Technologies, 10 (3), 227–232
Einfluss kombinierter Nd:YAG- und Hochleistungsdioden - Laserstrahlschweißprozesse auf die mechanischen Eigenschaften von Al6060 bei quasistatischer Beanspruchung
Schulze, V.; Barreiro, P.; Löhe, D.
2004. Aluminium: International Journal for Industry, Research and Application, 80 (12), 1392–1396
Das Konzept in der Erprobung. Vom Referenz- zum unternehmensspezifischen Prozess
Nesges, D.
2004. Erfolgreich Produkte entwickeln: Methoden, Prozesse, Wissen. Hrsg.: H. Grabowski, 51–78, LOG X
Die kMAP-Entwicklertage
Weismann, U.
2004. Erfolgreich Produkte entwickeln: Methoden, Prozesse, Wissen. Hrsg.: H. Grabowski, 111–128, LOG X
Integrative quality assurance of micro-parts using Microfeatures
Fleischer, J.; Spath, D.; Elsner, J.
2004. Microsystem Technologies, 10 (3), 162–166
Verteilte kooperative Fabrikplanung. Vom 3D-Layout-Planungswerkzeug zum Assistenzsystem
Fleischer, J.; Aurich, J. C.; Herm, M.; Stepping, A.; Köklü, K.
2004. wt Werkstattstechnik online, 94 (4), 107–110
Feinschliff für die Mikromontage - Komponenten und Baugruppen zur Automation in der Kleinserienfertigung
Fleischer, J.; Weule, H.; Krahtov, L.
2004. Mechatronik: Design, Entwicklung, Integration, 112 (4), 31–34
Es kommen trockene Zeiten
Fleischer, J.; Schmidt, J.; Dyck, M.
2004. WB Werkstatt + Betrieb, 137 (5), 49–52
Zündender Funke für die Mikrotechnik - Anwendungen und Maschinenkonzepte der Mikrofunkenerosion
Fleischer, J.; Schmidt, J.; Knoll, M.; Salim, E.; Leleu, F.
2004. Mikroproduktion, (1), 36–38
Das Wälzschälen wird wiederentdeckt
Schmidt, J.; Bechle, A.
2004. WB Werkstatt + Betrieb, 137 (6), 72–75
New Applications for Micro-EDM
Fleischer, J.; Masuzawa, T.; Schmidt, J.; Knoll, M.
2004. Journal of Materials Processing Technology, 149 (1-3), 246–249
Quality Simulation for Fast Ramp Up
Fleischer, J.; Spath, D.; Lanza, G.
2004. CIRP - Journal of Manufacturing Systems, 33 (6)
Reifegrade des Wissensmanagement - eine Methode zur Selbstbewertung
Fleischer, J.; Stepping, A.
2004. Wissensmanagement - das Magazin für Führungskräfte, (5), 32–34
Proaktive Anlaufsteuerung von Produktionssystemen entlang der Wertschöpfungskette
Fleischer, J.; Wawerla, M.; Nyhuis, P.; Winkler, H.; Liestmann, V.
2004. Industrie Management, 20 (4), 29–32
Übersicht über das Projekt MiMikri
Haupt, S.
2004. Abschlussbericht des Verbundprojektes MiMikri: grundlegende Untersuchungen zu Mikrowerkzeug- und Mikromessmaschinen für die prozesssichere Herstellung von Mikrobauteilen, Projektlaufzeit: Oktober 2001 - September 2004. Hrsg.: J. Schmidt, wbk
Flexible Profilbearbeitung im Leichtbau - Neuartiges Maschinenkonzept zur flexiblen Handhabung und Bearbeitung räumlich gerundeter Profile
Fleischer, J.; Munzinger, C.; Kies, S.; Schmidt-Ewig, J.; Ruch, D.
2004. wt Werkstattstechnik online, 94 (9), 422–425
Werkzeug- und Prozessgestaltung für das Trocken-Räumen: Durchgängig kühlschmierstofffreie Prozesskette verbessert Wirtschaftlichkeit
Fleischer, J.; Schmidt, J.; Lang, H.
2004. VDI-Z integrierte Produktion, 146 (II), 26–29
Virtual Cooperative Plant Planning
Fleischer, J.; Herm, M.; Stepping, A.
2004. Production Engineering, 11 (2), 151–154
Life-Cycle-Performance in der Produktionstechnik
Fleischer, J.; Weismann, U.; Nesges, D.; Wawerla, M.
2004. VDI-Z Integrierte Produktion, 146 (10), 87–90
Standzeitsteigerung durch gezielte Nachgiebigkeit im Werkzeug
Fleischer, J.; Schmidt, J.; Schmalzried, S.; Schmidt, C.
2004. VDI-Z Integrierte Produktion, 146 (III), 59
Product and Process Orientated Scheduling in Decentralized Production Structures
Fleischer, J.; Weule, H.; Klinkel, S.
2004. Production Engineering, 11 (2), 165–168
Quality Simulation for Optimization During Production Ramp-up
Fleischer, J.; Weule, H.; Lanza, G.
2004. Production engineering, 11 (2), 147–150
Trockene Zahnradvorbearbeitung - Prozesssichere Entwicklung des Hochleistungsbearbeitungsverfahren Wälzschälen
Fleischer, J.; Schmidt, J.; Bechle, A.
2004. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 99 (11), 647–652. doi:10.3139/104.100839
Mikrobearbeitung durch Abtragen
Fleischer, J.; Schmidt, J.; Knoll, M.; Haupt, S.; Müller, C.; Förster, R.; Gehringer, A.
2004. wt Werkstattstechnik online, 94 (11/12), 589–595
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Kies, S.; Munzinger, C.; Schmidt-Ewig, J.
2004. Aluminium: International Journal for Industry, Research and Application, 80 (12), 1425–1427
Sicherung operationeller Verfügbarkeiten durch Maschinenlieferanten
Fleischer, J.; Nesges, D.
2004. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 99 (12), 702–706
Materials Selection Process for Compound-extruded Aluminum Matrix Composites
Schulze, V.; Weidenmann, K. A.; Fleck, C.; Löhe, D.
2005. Advanced Engineering Materials, 7 (12), 1150–1155
Similarity considerations on the simulation of turning processes of steels
Delonnoy, L.; Hochrainer, T.; Schulze, V.; Löhe, D.; Gumbsch, P.
2005. International Journal of Materials Research, 96 (7), 761–769
Materials Handling Optimisation in Agile Manufacturing Systems
Fleischer, J.; Nussbaum, J.-M.; Stepping, A.; Wieser, J.
2005. EPE: European Production Engineering, 5–8
Simulationsunterstützte Optimierung im Agilen Fertigungssystem
Fleischer, J.; Stepping, A.; Wieser, J.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (1/2), 32–35
Bedarfsgerechte, prozessorientierte Informationsbereitstellung in produzierenden Unternehmen
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. Industrie Management, 21 (1), 17–20
Digitaler Serienanlauf beschleunigt den Markteintritt. Forschung entwickelt Werkzeuge für besseren Start der Produktion
Fleischer, J.; Nyhuis, P.; Wawerla, M.; Ender, T.; Heins, M.; Großhenning, P.
2005. Intelligenter Produzieren, (1), 36–37
Service orientiert sich künftig am Lebenszyklus - Verfügbarkeit der Anlagen lässt sich kalkulieren
Fleischer, J.; Horn, W.; Bosch, R.; Nesges, D.
2005. Intelligenter Produzieren, (2), 24–25
Die Serienproduktion kann beginnen. Prozesssichere automatisierte Produktion von hoch belastbaren Mikro-PIM-Zahnrädern
Fleischer, J.; Schlipf, M.; Dieckmann, A.-M.; Kugele, H.; Cremer, I.; Walcher, H.
2005. Mikroproduktion, (3), 50–53
Aktiver Ausgleich durch Adaptronik
Fleischer, J.; Munzinger, C.
2005. WB Werkstatt + Betrieb, 138 (4), 31–34
Fabrikplanung zur Umsetzung ganzheitlicher Produktionssysteme im Wertschöpfungsnetz
Fleischer, J.; Stepping, A.; Plaggemeier, J.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (5), 279–283
Strategies for the Manufacture of Mold Inserts
Fleischer, J.; Buchholz, C.; Kotschenreuther, J.
2005. Microengineering of metals and ceramics: design, tooling and injection molding. Ed.: D. Löhe, 87–106, Wiley-VCH Verlag. doi:10.1002/9783527616725.ch4
Die Reifeprüfung. Eine Reifekennzahl ergänzt die Leistungskennzahlen im Produktionsanlauf
Fleischer, J.; Ender, T.; Wagner, M.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (5), 261–265
High Performance Broaching
Fleischer, J.; Nesges, D.
2005. Production Engineering, 12 (1), 143–146
Enhancing Operational Availability by Harmonization of Equipment Elements with Product-accompanying Services
Fleischer, J.; Nesges, D.
2005. Production Engineering, 12 (1), 193–196
Quality Assurance in Micro Production - Chances and Challenges
Fleischer, J.; Behrens, I.
2005. Proceedings of the 5th international conference of the European Society for Precision Engineering and Nanotechnology, May 8th - May 11th 2005, Montpellier, France. Ed.: F. Chevrier, 687–690, Montpellier
Life-Cycle-Performance, partnerschaftlich zum Ziel
Fleischer, J.; Weismann, U.; Schmalzried, S.; Wawerla, M.
2005. WB Werkstatt + Betrieb, 138 (5), 75–78
Mit der Simulation schneller am Markt - CA-Techniken helfen bei der Optimierung von Fertigungseinrichtungen
Broos, A.; Melchinger, A.; Schmitz, E.
2005. Intelligenter Produzieren, (3), 17–18
Wärmeeintrag bei der Trockenbearbeitung
Fleischer, J.; Schmidt, J.; Pabst, R.
2005. WB Werkstatt + Betrieb, 138 (6), 43–46
Berechnung von Kompensationsdateien aus der Untersuchung der wirkstellennahen Positionsmessung
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (7/8), 401–405
Projektmanagement in der Fabrikplanung
Fleischer, J.; Stepping, A.; Peychal-Heiling, A.
2005. wt Werkstattstechnik online, 95 (7/8), 569–573
Bewertung der Life-Cycle-Performance - Eine Methode zum lebenszyklusorientierten Angebotsvergleich bei produktionstechnischen Anlagen
Fleischer, J.; Weismann, U.; Schmalzried, S.; Wawerla, M.
2005. wt Werkstattstechnik online, 95 (7/8), 559–563
OEE-Prognose im Produktionsanlauf. Simulationsgestützte Anlaufunterstützung mittels Kennzahlen
Lanza, G.; Fleischer, J.
2005. wt Werkstattstechnik online, 95 (7/8), 554–558
Zerspanungssimulation optimiert Produktionsabläufe
Fleischer, J.; Schmidt, J.; Schmidt, C.; Schermann, T.
2005. VDI-Z Integrierte Produktion, 147 (II), 63–65
Robotergestütztes fliegendes Trennen verbundverstärkter Profile
Fleischer, J.; Kies, S.; Stengel, G.
2005. wt Werkstattstechnik online, 95 (9), 661–665
Berechnung und Optimierung eines neuartigen Werkzeugmaschinenkonzepts zur Bearbeitung dreidimensional gerundeter Profile
Fleischer, J.; Kies, S.; Munzinger, C.; Tröndle, M.; Schmidt-Ewig, J. P.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (9), 502–506
Innovative Machine Kinematics for Combined Handling and Machining of Three-Dimensional Curved Lightweight Extrusion Structures
Fleischer, J.; Schmidt-Ewig, J. P.
2005. CIRP Annals - Manufacturing Technology, 54 (1), 317–320
Komfortabel, sicher, leistungsfähig, umweltfreundlich: Das Auto der Zukunft
Fleischer, J.; Biehl, M.; Schick, M.
2005. Forschen in Baden-Württemberg, 30–31, Ministerium für Wissenschaft
Reif für den industriellen Einsatz
Schmidt, J.; Bechle, A.
2005. VDMA-Nachrichten, 58
Wege zur produktiveren Fertigung
Fleischer, J.; Nussbaum, J.; Wieser, J.
2005. VDI-Z Integrierte Produktion, 147 (9), 46–50
Prozessinnovation durch prozessbasierte Qualitätsprognose im Produktionsanlauf
Fleischer, J.; Lanza, G.; Ender, T.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (9), 510–516. doi:10.3139/104.100935
Einsatz der Adaptronik am Beispiel hydrostatischer Führungen - Intelligente Niveauregulierung mittels adaptronischer Drucktascheneinheit
Fleischer, J.; Knödel, A.; Munzinger, C.
2005. O+P Ölhydraulik und Pneumatik, 49 (9), 555–557
Business Capabilities als Basis fähigkeitsorientierter Konfigurationen
Fleischer, J.; Herm, M.; Homann, U.; Peter, K.; Sternemann, K.-H.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (10), 553–557
Adaptronische hydrostatische Drucktascheneinheit
Fleischer, J.; Munzinger, C.; Knödel, A.
2005. wt Werkstattstechnik online, 95 (10), 809
Automatisiertes konturflexibles Greifen 3D-gekrümmter Profile
Fleischer, J.; Ruch, D.
2005. VDI-Z Integrierte Produktion, 147 (10), 70–71
Im Wälzschälen steckt viel Potenzial
Fleischer, J.; Schmidt, J.; Bechle, A.
2005. WB Werkstatt + Betrieb, 138 (10), 44–48
Entformkraftuntersuchung beim Micro-PIM-Prozess
Fleischer, J.; Dieckmann, A.-M.
2005. wt Werkstattstechnik online, 95 (11/12), 892–897
Structural Optimization of Machine Tools under Consideration of their Static and Dynamic Behavior within the Workspace
Fleischer, J.; Weule, H.; Neithardt, W.; Broos, A.; Schmidt-Ewig, J.-P.; Minx, J.
2005. Production Engineering, 12 (2), 201–204
Simulationsunterstützte Wirkbeziehungsanalyse im Produktionsanlauf – Ein Prognosesystem mit Materialfluss- und Qualitätssimulation
Nyhuis, P.; Heins, M.; Großhenning, P.; Fleischer, J.; Lanza, G.; Ender, T.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (12), 746–751. doi:10.3139/104.100981
Mikroformeinsätze in gehärteten Stählen
Fleischer, J.; Schmidt, J.; Haupt, S.; Halvadjiysky, G.; Kotschenreuther, J.
2005. wt Werkstattstechnik online, 95 (11/12), 887–891
Stability of residual stresses in longitudinally and transversally deep rolled sintered iron under quasistatic and cyclic loading
Merkel, J.; Schulze, V.; Wanner, A.; Löhe, D.; Vöhringer, O.
2006. International journal of materials research, 97 (10), 1304–1311
Mechanical strength and microstructure of Stabilor-G® and ZrO2 microspecimens
Schulze, V.; Auhorn, M.; Kasanicka, B.; Beck, T.; Löhe, D.
2006. Microsystem Technologies, 12 (7), 713–716
Computer Aided Simulation of Heat Treatment (C.A.S.H.) - Teil 4: Strategien zur Wärmebehandlungssimulation komplexer Stahl-Bauteile
Trapp, N.; Fiderer, M.; Lütjens, J.; Ehlers, M.; Schulze, V.; N. Trapp; M. Fiderer; J. Lütjens; M. Ehlers; V. Schulze.
2006. HTM - Journal of Heat Treatment and Materials, 61 (1), 25–33
Guiding and Cutting Spatially Curved Extruded Profiles
Fleischer, J.; Munzinger, C.; Kies, S.; Stengel, G.
2006. Production Engineering, 13 (1), 49–52
Design and Optimization of an Innovative Machine Kinematics for Combined Handling and Machining
Fleischer, J.; Schmidt-Ewig, J. P.
2006. Advanced Materials Research, 10, 163–172
Messung von Mikro-Verzahnungen - Entwicklung multisensorieller Messstrategien in der KMT
Fleischer, J.; Behrens, I.
2006. tm - Technisches Messen, 73 (1), 51–59
Quality Benchmarking for Micro Manufacturing Processes
Fleischer, J.; Lanza, G.; Schlipf, M.; Kotschenreuther, J.
2006. Production engineering, 13 (2), 169–172
Steigerung der Effizienz im Produktionsanlauf
Ender, T.; Rühmann, N.
2006. Unternehmen der Zukunft, 7 (2), 16–19
Neue Prozessketten für die Simulation
Lanza, G.; Herm, M.; Ude, J.
2006. wt Werkstattstechnik online, 96 (1/2), 24–29
Vom Senkerodieren zum mehrachsigen Erodierfräsen
Fleischer, J.; Haupt, S.; Halvadjiysky, G.; Quadroni, A.
2006. Mikroproduktion, (3), 44–45
Anlaufleistung in Wertschöpfungsnetzwerken
Lanza, G.; Herm, M.; Ude, J.
2006. wt Werkstattstechnik online, 96 (4), 233–238
Combination of a Parallel and a Serial Kinematics for the Integrated Handling and Machining of Lightweight Extrusion Structures
Fleischer, J.; Schmidt-Ewig, J. P.
2006. Proceedings / Parallel kinematic machines in research and practice: The 5th Chemnitz Parallel Kinematics Seminar, PKS 2006, April 25 - 26, 2006. Ed.: R. Neugebauer, 289–306, Verl. Wissenschaftliche Scripten
The manufacturing of micro molds by conventional and energy-assisted processes
Fleischer, J.; Kotschenreuther, J.
2006. The International Journal of Advanced Manufacturing Technology, 33 (1/2), 75–85
Bedeutung von Life Cycle Cost im Werkzeugmaschinenbau
Fleischer, J.; Wawerla, M.; Niggeschmidt, S.
2006. VDMA-Nachrichten, (5), 42–43
Combination of electric discharge machining and laser ablation in microstructuring of hardened steels
Fleischer, J.; Schmidt, J.; Haupt, S.
2006. Microsystem Technologies, 12 (7), 697–701
Ein dynamisches Klassifizierungsverfahren
Fleischer, J.; Ender, T.
2006. wt Werkstattstechnik online, 96 (6), 417–421
Scope Planning in Plant Planning Projects
Fleischer, J.; Stepping, A.
2006. Production Engineering, 8 (1), 161–166
Mit gebündeltem Know-how systematisch trockenlegen
Schmalzried, S.; Pabst, R.; Sellmer, D.; Schuwerk, J.; Wellner, C.
2006. WB Werkstatt + Betrieb, 139 (7/8), 44–47
Maschinentechnik zur flexiblen Herstellung räumlich gekrümmter Strangpressprofile
Fleischer, J.; Lanza, G.; Munzinger, C.; Schmidt-Ewig, J.; Ruch, D.; Schneider, M.
2006. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (7/8), 426–430
Automation of the Powder-Injection-Moulding Process
Fleischer, J.; Dieckmann, A.-M.
2006. Microsystem Technologies, 12 (7), 702–706
Neunmal Nebenzeit einsparen
Fleischer, J.; Peter, K.; Ender, T.
2006. WB Werkstatt + Betrieb, 139 (7/8), 74–77
Quality Assurance in Micro Production
Fleischer, J.; Lanza, G.; Schlipf, M.; Behrens, I.
2006. Microsystem technologies, 12 (7), 707–712
Verfügbarkeits- und Lebenszykluskostenprognose - Ein Ansatz zur Steigerung der Life-Cycle-Performance im Maschinen- und Anlagenbau
Fleischer, J.; Weismann, U.; Niggeschmidt, S.
2006. wt Werkstattstechnik online, 96 (7/8), 483–488
Maschinenüberwachung unter Life-Cycle-Aspekten - Zustandsprognose durch konsequente Online-Diagnose an hoch belasteten Maschinenkomponenten
Fleischer, J.; Weismann, U.; Schmalzried, S.; Schopp, M.
2006. wt Werkstattstechnik online, 96 (7/8), 435–440
Interorganisationelles Anlagencontrolling
Fleischer, J.; Weismann, U.
2006. wt Werkstattstechnik online, 96 (7/8), 477–482
Net Shape Reaction Bonded Ceramic Micro Parts by Mechanical Microstructuring
Ritzhaupt-Kleissl, H.-J.; Binder, J. R.; Gietzelt, T.; Kotschenreuther, J.
2006. Advanced engineering materials, 8 (10), 983–988. doi:10.1002/adem.200600052
Sensitivitätsbetrachtungen bei der Zerspansimulation
Schmidt, J.; Schermann, T.; Schmidt, C.
2006. VDI-Z Integrierte Produktion, 148 (II), 59–61
Wissensmanagement und Simulation steigern die Effizienz im Produktionsanlauf
Fleischer, J.; Ender, T.; Rühmann, N.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (7/8), 412–415
Entwicklung von Low Cost-Lieferanten
Fleischer, J.; Wawerla, M.; Weiler, S.
2006. Produktion, (37)
Planungsansatz für die Mikromontage
Fleischer, J.; Krahtov, L.; Volkmann, T.
2006. wt Werkstattstechnik online, 96 (9), 602–607
Intelligente Automatisierung mit hoher Flexibilität - Modulares, mehrachsiges Handhabungssystem
Wieser, J.; Burghardt, S.; Schappacher, H.
2006. Handling - Magazin für Automation, Handhabungstechnik und Logistik, (9), 40–43
Effiziente Diagnosestrategien für einen schnellen Ramp-up
Fleischer, J.; Schopp, M.; Ender, T.; Ordenewitz, R.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (9), 509–513
Ein simulationsgestütztes Optimierungskonzept für Produktionssysteme
Fleischer, J.; Ender, T.; Wienholdt, H.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (9), 480–485
Verkürzung von Produktionsanlaufprozessen durch effiziente Inbetriebnahmeprozesse
Fleischer, J.; Lanza, G.; Ender, T.; Schmalzried, S.; Giemsch, P.
2006. wt Werkstattstechnik online, 96 (9), 688 – 692
Hilfssystem unterstützt bei Messablaufplanung von Mikroteilen - Charakterisierung kleinster Strukturen
Fleischer, J.; Behrens, I.; Peters, J.; Schlipf, M.
2006. Qualität und Zuverlässigkeit, 51 (10), 87–90
A Dynamic Business-Process Based Production Ramp-up Simulation Model
Fleischer, J.; Lanza, G.; Ender, T.
2006. Production engineering, 13 (2), 107–110 197--200
Berechnung von Lebenszykluskostenverteilungen
Fleischer, J.; Wawerla, M.
2006. wt Werkstattstechnik online, 96 (10), 772–777
Einfluss von Serviceleistungen auf die Verfügbarkeit produktionstechnischer Anlagen
Fleischer, J.; Niggeschmidt, S.; Rühl, J.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (10), 561–565
Von der Diagnose zur Prognose - Kombination von Maschinendiagnose/-prognose und Benutzerführung im Störungsfall
Fleischer, J.; Schmalzried, S.; Schopp, M.
2006. Werkstatt und Betrieb, 139 (10), 81–84
Einführung eines Low-Cost_FTS in der Cockpit-Vormontage
Wieser, J.; Peter, K.; Jung, M.
2006. Logistik für Unternehmen, 20 (10), 54–55
Störungsfreier Produktionsanlauf mit ProactAS
Nyhuis, P.; Heins, M.; Fleischer, J.; Ender, T.
2006. Produktion, (10), 40
Hilfssystem unterstützt bei Messablaufplanung von Mikroteilen - Charakterisierung kleinster Strukturen
Fleischer, J.; Behrens, I.; Peters, J.; Schlipf, M.
2006. Mikroproduktion, (4), 63–64
Flexible and intelligent gripping technology for machining and handling of spatially curved extruded aluminum profiles
Lanza, G.; Fleischer, J.; Ruch, D.
2006. Advanced materials research, 10, 153–162
Effiziente Produktionsanläufe - Mit Ressourcenmanagement in eine erfolgreiche Zukunft
Fleischer, J.; Ender, T.
2006. Intelligenter Produzieren, (6), 17–18
Flexible Fertigung durch Mikrofunkenerosion
Fleischer, J.; Schmidt, J.; Haupt, S.; Halvadjiysky, G.; Quadroni, A.
2006. wt Werkstattstechnik online, 96 (11/12), 844–848
Konzept einer genauen Parallelkinematik
Munzinger, C.; Kipfmüller, M.
2006. VDI-Z integrierte Produktion, 148 (11/12), 30–33
Using Part-Specific Scales for Positioning of Spatially Curved Profiles in a Highly Flexible Clamping System
Fleischer, J.; Lanza, G.; Ruch, D.
2006. Production engineering, 13 (2), 39–42
Approach to adaptronical compensation of geometrical machine errors
Fleischer, J.; Munzinger, C.; Weis, M.
2006. Production Engineering, 13 (2), 217–220
Technische Dienstleistungsstrategien im Produktionsanlauf
Fleischer, J.; Ender, T.; Schopp, M.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (12), 694–697
Life Cycle Costing im Maschinen- und Anlagenbau
Wawerla, M.; Dervisopoulos, M.; Schatka, A.; Torney, M.
2006. Industrie Management, 22 (6), 55–58
Influence of cyclic temperature changes on the microstructure of AISI 4140 after laser surface hardening
Miokovic, T.; Schulze, V.; Vöhringer, O.; Löhe, D.
2007. Acta Materialia, 55 (2), 589–599
HarWeST - Handhabungsgerechte Werkzeugmaschinen für die künftige Serienfertigung kubischer Teile
Fleischer, J.; Munzinger, C.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (1/2), 65–72
Ressourcenmanagement für erfolgreiche Produktionsanläufe
Fleischer, J.; Ender, T.; Mössner, A.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (1/2), 42–45
LICMA - Life Cycle Performance im Maschinen- und Anlagenbau
Fleischer, J.; Rühl, J.; Weismann, U.; Faigle, B.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (1/2), 55–59
Mass production in myMIM: putting theory to work
Fleischer, J.; Walcher, H.; Maetzig, M.; Dieckmann, A.-M.
2007. Metal Powder Report, 62 (3), 18–20
Homogenisierung des Steifigkeitsverlaufes von Werkzeugmaschinen
Fleischer, J.; Tröndle, M.
2007. wt Werkstattstechnik online, 97 (3), 178–182
Bewertung der Anlauffähigkeit in Netzwerken
Lanza, G.; Ude, J.; Fronia, P.
2007. wt Werkstattstechnik online, 97 (4), 262–266
Rechnerunterstützte Planung der Messung von Mikrobauteilen
Fleischer, J.; Peters, J.; Behrens, I.; Schlipf, M.
2007. inno: Innovative Technik - Neue Anwendungen, 12 (36), 6
Optimierung von Produktionsabläufen in einem Niedriglohnland
Fleischer, J.; Ender, T.; Zäh, M.; Ostgathe, M.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (6), 361–366
Leistungskalkulation hybrider Produkte
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (7/8), 526–532
Datenbasis für lastabhängige Prozesseingriffe - Modularisierung und Analyse von Ausfallursachen zur Erhöhung der Verfügbarkeit von Werkzeugmaschinen
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (7/8), 491–497
Modulares Greifsystem für die Verpackungstechnik
Munzinger, C.; Köhler, G.; Ruch, D.; Simm, T.
2007. wt Werkstattstechnik online, 97 (9), 676–682
Modularisierung komplexer Produktionsanlagen - Analyse von Störgrößen und Verfügbarkeitsbestimmung am Beispiel von Getränkeabfüllanlagen
Fleischer, J.; Wieser, J.; Schopp, M.; Oestreicher, T.; Zölfl, M.; Hahn, W.
2007. wt Werkstattstechnik online, 97 (9), 668–675
Mechanical module interfaces for reconfigurable machine tools
Fleischer, J.; Wieser, J.; Abele, E.; Wörn, A.; Martin, P.; Klöpper, R.
2007. Production Engineering, 1 (4), 421–428
Business Capabilities as configuration elements of value added networks
Fleischer, J.; Herm, M.; Ude, J.
2007. Production Engineering, 1 (2), 187–192
Simulation and optimization of complete mechanical behaviour of machine tools
Fleischer, J.; Munzinger, C.; Tröndle, M.
2007. Production Engineering, 2 (1), 85–90
Entwicklung eines Bewertungssystems für Instandhaltungstätigkeiten an Werkzeugmaschinen
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.; Broos, A.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (11), 756–764
Fertigungsverfahren in der Mikrotechnik
Fleischer, J.; Löhe, D.; Kotschenreuther, J.; Schulze, V.; Deuchert, M.; Halvadjiysky, G.; Haupt, S.; Kienzler, A.
2007. wt Werkstattstechnik online, 97 (11/12), 847–851
Erfolgreicher Einkauf in China durch Zukaufteilanalyse
Fleischer, J.; Weiler, S.
2007. VDI-Z, 149 (III), 67–70
Bilanz und neue Perspektiven - Forschungs- und Entwicklungsprojekte im Bereich Life-Cycle-Performance
Fleischer, J.; Niggeschmidt, S.; Köhler, G.
2006. Instandhaltung, (12), 18–20
Process parameter analysis in ablating micro mold manufacturing
Fleischer, J.; Haupt, S.; Halvadjiysky, G.
2008. Microsystem Technologies, 14 (9/11), 1367–1372
Lebenszyklusoptimierte Antriebslösungen auf Basis eines Sensor-Getriebes
Fleischer, J.; Schopp, M.; Eidam, J.; Stahl, W.
2008. Konstruktion, (S1), 16–20
Statistical modelling of process parameters in micro cutting
Lanza, G.; Fleischer, J.; Kotschenreuther, J.; Peters, J.; Schlipf, M.
2008. Proceedings of the Institution of Mechanical Engineers / B, 222 (1), 15–22. doi:10.1243/09544054JEM853
Schneidendämpfung optimiert Standzeit beim Drehen mit unterbrochenem Schnitt
Fleischer, J.; Pabst, R.; Becke, C.
2008. MaschinenMarkt, 5, 38–42
Statistical quality control in micro-manufacturing through multivariate my-EWMA chart
Fleischer, J.; Lanza, G.; Schlipf, M.
2008. CIRP Annals - Manufacturing Technology, 57 (1), 521–524
Simulationsgestützte Konzeption von Handhabungskinematiken
Fleischer, J.; Schmidt-Ewig, J. P.
2008. wt Werkstattstechnik online, 98 (3), 176–184
Erfolgreicher technischer Einkauf in China
Fleischer, J.; Weiler, S.; Ender, T.; Wawerla, M.
2008. Industrie Management, 24 (1), 43–46
Mikroverzahnungsprüfkörper my-DBA für evolventische Profillinienabweichungen
Fleischer, J.; Buchholz, I.; Härtig, F.; Dai, G.
2008. tm - Technisches Messen, 75 (3), 168–177
Genauigkeitssteigerung bei der automatisierten Bearbeitung 3D-gerundeter Rohrprofile
Fleischer, J.; Lanza, G.; Schmidt-Ewig, J.; Ruch, D.
2008. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 103 (3), 144–150
Accuracy Improvement of a Machine Kinematics for the Product Flexible Machining of Curved Extrusion Profiles
Fleischer, J.; Schmidt-Ewig, J. P.
2008. Advanced Materials Research, 43, 123–134
Mechanical structuring, surface treatment and tribological characterization of steel mould inserts for micro powder injection moulding
Fleischer, J.; Schulze, V.; Kotschenreuther, J.; Löhe, D.; Schneider, J.; Kienzler, A.; Zum Gahr, K. H.
2008. Microsystem technologies, 14 (12), 1797–1803. doi:10.1007/s00542-008-0620-5
Aufwandsreduktion bei der Werkzeugmaschinensimulation - Anforderungen
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. wt Werkstattstechnik online, 98 (4), 321–326
Erfolgreich in China - Integration von Einkauf und Produktion
Fleischer, J.; Weiler, S.
2008. VDI-Z, 150 (4), 74–77
Ganzheitliche Produktionssysteme: Wann, Warum, Wie?
Lanza, G.; Peter, K.; Ude, J.
2008. Industrie-Management, 24, 49–52
Production of two-material micro-assemblies by two-componentpowder injection molding and sinter-joining
Ruh, A.; Dieckmann, A.-M.; Heldele, R.; Piotter, V.; Ruprecht, R.; Munzinger, C.; Fleischer, J.; Haußelt, J.
2008. Microsystem technologies, 14 (12), 1805–1811. doi:10.1007/s00542-008-0646-8
Trends bei der Entwicklung von Normalen für die Mikro- und Nanomesstechnik
Fleischer, J.; Buchholz, I.; Viering, B.
2008. tm - Technisches Messen, 75 (5), 288–297
Erfassung von Standardgeometrieelementen im Mikrometerbereich - Herausforderungen und Lösungsansätze
Fleischer, J.; Buchholz, I.; Peters, J.; Viering, B.
2008. tm - Technisches Messen, 75 (5), 327–338
An Approach to Accuracy Improvements in the Flexible Machining of Curved Profiles
Lanza, G.; Fleischer, J.; Ruch, D.
2008. Advanced materials research, 43, 123–134. doi:10.4028/www.scientific.net/AMR.43.123
Mikrobohrverfahren für den industriellen Einsatz
Fleischer, J.; Schlipf, M.; Ehninger, C.; Oßwald, K.
2008. wt Werkstattstechnik online, 98 (6), 515–519
Erhöhte Nachgiebigkeit steigert Standzeiten beim Fräsen
Schulze, V.; Becke, C.; Pabst, R.
2008. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 475–479
Lastabhängige Restlebensdauerprognose von Maschinenkomponenten
Fleischer, J.; Werner, P.; Rühl, J.
2008. wt Werkstattstechnik online, 98 (7/8), 549–554
Intelligente Instandhaltung von Werkzeugmaschinen
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.
2008. wt Werkstattstechnik online, 98 (7/8), 538–544
Ermittlung der Komponentenbelastungen von Werkzeugmaschinen für einen lebenszyklusoptimalen Betrieb
Fleischer, J.; Munzinger, C.; Schopp, M.; Hennrich, H.; Broos, A.; Wieser, J.
2008. atp-edition, 50 (7), 45–52
Verfügbarkeitsoptimale Dienstleistungskonfiguration
Fleischer, J.; Meier, H.; Kaiser, U.; Kings, R.; Niggeschmidt, S.
2008. wt Werkstattstechnik online, 98 (7/8), 601–606
Diagnóstico e prognóstico remotos de falhas evitam paradas e melhoram a manutenção
Fleischer, J.; Schmalzried, S.; Schopp, M.
2008. MM Máquinas e Matails, XLIV (512), 54–67
Flexible Zuführung von Mikrobauteilen mit Schwingförderern
Munzinger, C.; Tröndle, M.
2008. wt Werkstattstechnik online, 98 (9), 697–700
Sinterfügen von Micro-PIM-Bauteilen - Ein Montagekonzept in der Mikrotechnik
Munzinger, C.; Rögner, J.; Dieckmann, A.-M.
2008. wt Werkstattstechnik online, 98 (9), 701–705
Improving tool life by varying resilience and damping properties in close proximity of the cutting edge
Fleischer, J.; Becke, C.; Pabst, R.
2008. Production Engineering, 2 (4), 357–364
Kostensimulation für Instandhaltungsverträge
Lanza, G.; Rühl, J.; Werner, P.
2008. wt Werkstattstechnik online, 98 (9), 760 – 765
Dämpfend fixierte Wendeschneidplatte verbessert Standzeit beim Fräsen
Fleischer, J.; Pabst, R.; Becke, C.
2008. MM - Das IndustrieMagazin, 36, 64–67
Von der Folie zum Bauteil
Munzinger, C.; Dieckmann, A.-M.; Ruprecht, E.
2008. wt Werkstattstechnik online, 98 (9), 693–696
Simulationsunterstützte Entwicklung einer parallelen Achsanordnung - Räumwerkzeugschleifmaschine mit Parallelkinematik
Munzinger, C.; Broos, A.; Kipfmüller, M.; Lang, H.
2008. VDI-Z integrierte Produktion, 150 (9), 96–97
Energiewandler für den Einsatz in energieautarken Funktionsmodulen
Munzinger, C.; Weis, M.; Herder, S.
2008. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 103 (10), 700–704
Intelligentes hydrostatisches Führungssystem
Munzinger, C.; Weis, M.; Herder, S.
2008. O+P Ölhydraulik und Pneumatik, (11/12), 592–595
Mit Mikrobahnerosion zum perfekten Formeinsatz
Schulze, V.; Ruhs, C.
2008. Mikroproduktion, (5), 34–37
Kompensation des Größeneffekts "Schneidkantenversatz" im Mikrofräsprozess
Schulze, V.; Deuchert, M.; Ruhs, C.
2008. nc transfer, 16 (41), 17
Life-Cycle-Performance als Grundlage für technische Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. Informationen für die Wirtschaft - Zeitschrift der Industrie- und Handelskammer Nordschwarzwald, (1/2), 40–41
Lifecycle-oriented component selection for machine tools based on multibody simulation and component life prediction
Fleischer, J.; Broos, A.; Schopp, M.; Wieser, J.; Hennrich, H.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (3), 179–184
Simulation des Wärmeeintrags verbessert Toleranztreue bei der Trockenbearbeitung
Schulze, V.; Michna, J.; Pabst, R.; Hauer, T.
2009. Maschinenmarkt, (13), 26–28
Thermische Belastung beim Stirnplanfräsen
Schulze, V.; Michna, J.; Pabst, R.; Hauer, T.
2009. wt Werkstattstechnik online, 99 (4), 281–286
Entwicklung einer Methode zur Ableitung von Flexibilitätsklassen in der Produktion
Nachtwey, A.; Schwarz, S.; Riedel, R.; Schopp, M.
2009. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (4), 224–228
Geometrieoptimierung von Mikrofräsern
Schulze, V.; Ruhs, C.; Kühlewein, C.; Deuchert, M.
2009. Mikroproduktion, (2), 40–44
Hybrid machining of microstructures using a combination of electrical discharge machining milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2009. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 27 (3), 1327–1329
Analyse und Bewertung der Kosten von Produktionsausfällen - Am Beispiel einer Fallstudie
Munzinger, C.; Schopp, M.; Beth, M.; Konrad, T.; Forkert, T.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (5), 371–378
Position and contour detection of spatially curved profiles on the basis of a component-specific scale
Fleischer, J.; Munzinger, C.; Lanza, G.; Ruch, D.
2009. CIRP annals, manufacturing technology, 58 (1), 481–484. doi:10.1016/j.cirp.2009.03.040
Optimization of preventive maintenance and spare part provision for machine tools based on variable operational conditions
Lanza, G.; Niggeschmidt, S.; Werner, P.
2009. CIRP annals, manufacturing technology, 58 (1), 429–432. doi:10.1016/j.cirp.2009.03.030
Configuration of dynamic value added networks
Lanza, G.; Ude, J.
2009. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), 561–570. doi:10.1243/09544054JEM1368
Lernregelkreise zur Unterstützung der Qualitätsregelung in der manuellen Montage
Schick, M.; Haueis, M.; Schneider, F.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 463–467
Prozesskette zur flexiblen Herstellung leichter Tragwerkstrukturen
Munzinger, C.; Lanza, G.; Elser, J.; Ruch, D.; Schneider, M.; Köhler, G.; Gerbracht, T.; Ochs, A.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 442–449
Taumelfräsen zur schädigungsarmen Bohrbearbeitung von Kompositwerkstoffen
Schulze, V.; Becke, C.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 473–477
Hybrid machining of microstructures using a combination of electrical discharge machining milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2009. Virtual Journal of Ultrafast Science, 8 (6), 1327–1329
Flexible Herstellung gekrümmter Strangpressprofile
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.; Gerbracht, T.; Köhler, G.; Ochs, A.; Schneider, M.
2009. wt Werkstattstechnik online, 99 (6), 445–452
Gestaltung verteilter Entwicklungsnetzwerke
Lanza, G.; Ude, J.; Deuringer, A.-C.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 560–565
Ausfallorientierte Bewertung technischer Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. wt Werkstattstechnik online, 99 (7/8), 533–538
Development and implementation of smart maintenance activities for machine tools
Munzinger, C.; Fleischer, J.; Broos, A.; Hennrich, H.; Wieser, J.; Ochs, A.; Schopp, M.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (4), 237–246
Hybrides Planungswerkzeug zur adaptiven Planung
Lanza, G.; Peter, K.; Jondral, A.; Spath, D.; Korge, A.; Krause, T.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 582–587
Simulation of service costs throughout the life cycle of production facilities
Lanza, G.; Rühl, J.
2009. CIRP journal of manufacturing science and technology, 1 (4), 247–253. doi:10.1016/j.cirpj.2009.06.004
Simulationsgestützte Entwicklung von Mikrofräswerkzeugen
Schulze, V.; Ruhs, C.; Kühlewein, C.; Deuchert, M.
2009. Maschinenmarkt, (32), 14–18
Automatisierung in der Leichtbauproduktion
Köhler, G.; Ochs, A.; Schneider, M.
2009. wt Werkstattstechnik online, 99 (9), 614–617
Simulation von Prozessketten in der Fertigung
Schulze, V.; Pabst, R.; Meier, H.
2009. Jahresmagazin Ingenieurwissenschaften, 90–95
Bewertung von Stückzahl- und Variantenflexibilität in der Produktion
Lanza, G.; Rühl, J.; Peters, S.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (11), 1039 – 1044
Modellierung und Steigerung der Güte von Qualitätsregelkreisen - Quality Control Modelling Language (QMOLA) als neues Werkzeug
Schick, M.; Mubarak, H.; Haueis, M.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (12), 1151–1157
Energyharvesting für Fluidsysteme
Weis, M.; Herder, S.
2009. FLUID Markt, (12), 26–27
Instandhaltungsoptimierung für Windkraftanlagen
Lanza, G.; Werner, P.; Behmann, B.; Rühl, J.
2009. IHK Magazin, (12), 10–11
Robuste Prozesse in Toploadern
Munzinger, C.; Köhler, G.
2010. VR online, 61/6935 (6), 43–44
Flexible Bearbeitung gekrümmter Aluminiumprofile - Programmierung einer kombinierten Handhabungs- und Bearbeitungskinematik
Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2010. wt Werkstattstechnik online, 100 (1/2), 37–41
Mathematische Modellierung des Wärmeeintrags beim Fräsen
Schulze, V.; Michna, J.; Pabst, R.
2010. wt Werkstattstechnik online, 100 (1/2), 62–66
Beim Händewaschen wird Strom gespart
Munzinger, C.; Herder, S.; Weis, M.; Huse, S.
2010. Badische Neueste Nachrichten, 2010 (38)
Fundierte Beurteilung von monetären Risiken: Dynamische Bewertung von Produktionsszenarien
Lanza, G.; Peters, S.; Rühl, J.; Günther, T.
2010. VDI-Z integrierte Produktion, 152 (1-2), 67–69
Reorganisation von Produktionssystemen in kleinen und mittelständischen Unternehmen mit Hilfe simulationsbasierter Prozessmuster für Lean Methoden
Lanza, G.; Jondral, A.; Peter, K.; Toewe, H.
2010. wt Werkstattstechnik online, 100 (3), 125–130
Automatisierte Topologieoptimierung unter der Berücksichtigung verschiedener Lastpositionen
Munzinger, C.; Broos, A.; Gerbracht, T.; Tröndle, M.; Hennrich, H.
2010. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (3), 66–68
Design and prototyping of a ceramic micro turbine: a case study
Bauer, W.; Müller, M.; Knitter, R.; Börsting, P.; Albers, A.; Deuchert, M.; Schulze, V.
2010. Microsystem Technologies, 16 (4), 607–615. doi:10.1007/s00542-009-0974-3
Design for low-cost country sourcing: Defining the interface between product design and production
Lanza, G.; Weiler, S.; Vogt, S.
2010. CIRP journal of manufacturing science and technology, 2 (4), 261–271
Komplexe Baugruppen einfach sinterfügen
Munzinger, M.; Dieckmann, A.-M.; Klimscha, K.
2010. Mikroproduktion, (3), 42–45
Ganzheitliche Modellierung von Produktionssystemen - Ein stochastisches, ganzheitliches Modell zur Lebenszyklusberechnung
Lanza, G.; Behmann, B.; Peters, S.; Peter, K.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 478–482
Verfügbarkeitswirksame technische Dienstleistungen - Potenzialanalyse bei KMU im Maschinen- und Anlagenbau
Lanza, G.; Behmann, B.; Peters, S.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 421–425. doi:10.3139/104.110312
Towards the flexible and near-net-shape production of three-dimensionally curved extrusion profiles
Munzinger, C.; Schulze, V.; Schneider, M.; Koehler, G.; Becker, D.; Selvaggio, A.; Tekkaya, A. E.; Kleiner, M.
2010. Production Engineering, 4 (6), 561–569. doi:10.1007/s11740-010-0246-1
Multidimensional evaluation of value added networks
Lanza, G.; Ude, J.
2010. CIRP annals, manufacturing technology, 59 (1), 489–492. doi:10.1016/j.cirp.2010.03.080
Schwingungsunterstütztes Greifen technischer Textilien
Munzinger, C.; Schulze, V.; Ochs, A.
2010. VDI-Z Integrierte Produktion, 152 (6), 51–53
Aufwandsreduktion der Modulmontage mittels justierbarem Schnittstellenbaukasten
Abele, E.; Korff, D.; Munzinger, C.; Hennrich, H.
2010. wt Werkstattstechnik online, 100 (7/8), 546–552
Life Cycle Performance in der Produktionstechnik
Lanza, G.; Munzinger, C.; Broos, A.; Behmann, B.; Hennrich, H.; Niggeschmidt, S.; Peters, S.; Rühl, J.; Schopp, M.; Werner, P.
2010. wt Werkstattstechnik online, 100 (7/8), 628–631
Elektro-pneumatischer Energiewandler
Munzinger, C.; Weis, M.; Herder, S.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (7/8), 706–709
Limits and challenges of manufacturing micro moulds
Schulze, V.; Weber, P.; Deuchert, M.; Haupt, S.; Ruhs, C.; Kienzler, A.
2010. International Journal of Nanomanufacturing, 6 (1/2/3/4), 176–189. doi:10.1504/IJNM.2010.034782
Modelling of the heat input for face-milling processes
Pabst, R.; Fleischer, J.; Michna, J.
2010. CIRP Annals - Manufacturing Technology, 59 (1), 121–124. doi:10.1016/j.cirp.2010.03.062
Mikro-Kraftwerke groß im Kommen - Neue Wandler für Energy Harvesting
Weis, M.; Herder, S.
2010. Elektronik, (19), 28–33
Machining Strategies for Hole Making in Composites with Minimal Workpiece Damage by Directing the Process Forces Inwards
Schulze, V.; Becke, C.; Weidenmann, K.; Dietrich, S.
2011. Journal of Materials Processing Technology, 211 (3), 329–338. doi:10.1016/j.jmatprotec.2010.10.004
Simulation of parallel kinematic machine toolswith minimal effort
Munzinger, C.; Krauße, M.; Kipfmüller, M.
2010. Production Engineering, 4 (5), 491–499. doi:10.1007/s11740-010-0259-9
Heilsame Trennung
Schlipf, M.; Lanza, G.; Dietrich, E.; Schulze, A.
2010. Qualität und Zuverlässigkeit, 55 (10), 68–71
Energy Harvesting für Sanitärarmaturen
Munzinger, C.; Herder, S.; Weis, M.
2010. Technik in Bayern, (6), 10–11
Miniturbine mit Klauenpolgenerator für die Versorgung von fluidischen Energy-Harvesting-Systemen
Munzinger, C.; Weis, M.; Herder, S.
2010. Galvanotechnik, 101 (12), 2898–2904
Heuristische Geschäftsprozessoptimierung in der Fahrzeugentwicklung
Schlichtenmayer, K.-H.; Maier, H.; Lanza, G.; Peters, S.; Krämer, L.
2010. Konstruktion, 6 (11/12), 67–68
Detection of shape deviations and measurement errors by a point cloud analysis
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.; Peters, J.
2010. Production engineering, 4 (6), 599–605. doi:10.1007/s11740-010-0268-8
Positionierung und Synchronisation von kooperierenden Robotern
Herrmann, C.; Hennes, M.; Juretzko, M.; Schneider, M.; Munzinger, C.
2010. Vernetzt und ausgeglichen : Festschrift zur Verabschiedung von Prof. Dr.-Ing. habil. Dr.-Ing. e.h. Günter Schmitt. Hrsg.: K. Zippelt, 129–134, KIT Scientific Publishing
Strategien zur wirtschaftlichen Gestaltung der globalen Beschaffung. PhD dissertation
Weiler, S.
2010. Shaker Verlag
Simulation zur Kosten- und Risikobewertung von Produktionsszenarien
Lanza, G.; Peter, K.; Peters, S.; Rühl, J.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 469–476, KIT Scientific Publishing
Modellierung und Simulation von Wertschöpfungsnetzwerken unter Berücksichtigung realer Entscheidungsstrukturen durch die Verwendung von Software-Agenten
Lanza, G.; Book, J.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 389–396, KIT Scientific Publishing
Anwenderfreundliche und komplexitätsreduzierte Bewertung und Robustheitsuntersuchung von Lean-Methoden bei kleinen und mittleren Unternehmen
Lanza, G.; Peter, K.; Jondral, A.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 189–196, KIT Scientific Publishing
Sensorbasierte Zustandsdiagnose und -prognose von Kugelgewindetrieben. PhD dissertation
Schopp, M.
2009. Shaker Verlag
Aufwandsoptimierte Simulation von Werkzeugmaschinen. PhD dissertation
Kipfmüller, M.
2010. Shaker Verlag. doi:10.5445/IR/1000014668
Accuracy improvement of a machine kinematics for the product flexible machining of curved extrusion profiles
Fleischer, J.; Schmidt-Ewig, J. P.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 135–144, Trans Tech Publications
Influence of process parameters on structure and mechanical properties of joints produced by electromagnetic forming and friction stir welding
Barreiro, P.; Schulze, V.; Löhe, D.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 47–56, Trans Tech Publications
Accuracy of a flying cutting device
Munzinger, C.; Fleischer, J.; Stengel, G.; Schneider, M.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 23–36, Trans Tech Publications
Flexible manufacture of lightweight frame structures. Phase II: integration
Weinert, K.; Fleischer, J.; Tekkaya, A. E.; Zäh, M.
2008. (M. Schikorra, Ed.), Trans Tech Publications
Prediction of Functionality and Life Cycle Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Oerding, J.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology. Ed.: H. Van Brussel, European Society for Precision Engineering and Nanotechnology (euspen)
Lebenszyklusorientiertes interorganisationelles Anlagencontrolling. PhD dissertation
Weismann, U.
2008. Shaker Verlag
Automatisierung von Hochbauprozessen
Bock, T.; Gebhart, F.; Steck, W.
1992. BMT 1992 S. 113-117, S. 197-202 u. S. 323-325
Optimierte Antriebskonzepte für Räummaschinen - Potentiale zur Leistungssteigerung. PhD dissertation
Wilke, O.
1996. Karlsruhe 1996. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 68.) Fak. f. Maschinenbau, Diss. v. 15.2.1996., Universität Karlsruhe (TH)
Neue Systeme fuer werkstattorientierte Programmierverfahren
Loeffler, L.; Selinger, T.; Zimmer, J.
1989. In: Werkstattorientierte Programmierverfahren (WOP). Hrsg.: S. Liese. Karlsruhe 1989. S. A20 - A22. (KfK-PFT. 138.)
Information management to support economical disassembly of technical products
Spath, D.; Tritsch, C.
1996. In: Life cycle modelling for innovative products and processes. Ed.: F.-L. Krause. London 1996
EDM-Systeme als IV-Infrastruktur bei mittelständischen Unternehmen
Windmueller, T.; Lanza, M.
1996. Werkstattstech. 86 (1996) S. 554
Komponentenentwicklung für Servicesysteme
Schmaelzle, A.
1996. Werkstattstech. 86 (1996) S. 484
Unterstützung von Planungssystemen durch Techniken der Virtuellen Realität
Osmers, U.; Weber, J.
1996. wt Werkstattstechnik online, 86 (3), 141
Hartstoffbeschichtete Kugeln in Kugelgewindetrieben und Schienenführungen
Haberkern, A.
1996. wt Werkstattstechnik online, 86 (9), 484
Reibungs- und Verschleißreduzierung in Linearachsen durch optimale Beschichtung
Haberkern, A.
1996. wt Werkstattstechnik online, 86 (4), 211
Betriebszustandsabhängige Vorspannungsregelung bei Kugelgewindetrieben
Haberkern, A.
1996. wt Werkstattstechnik online, 86 (10), 554
Eine Innovationskultur bedarf des Zusammenspiels aller kreativen Kräfte
Weule, H.
1996. Werkstattstech. 86 (1996) S. 80
Technologietransfer braucht den Menschen
Weule, H.
1996. Werkstattstech. 86 (1996) S. 425
Produktionstechnik im Jahr 2000
Weule, H.
1996. In: Unternehmensprofile "Fertigungstechnik, Materialfluß und Automatisierung" für die Volksrepublik China und Hongkong. VDMA. 1996
Die Bedeutung der Produktentwicklung für den Standort Deutschland
Weule, H.
1996. In: Tagungsband zur VDI-Tagung "Informationsverarbeitung in der Konstruktion ’96", Systems ’96, München 1996
Sicherung der Mobilität
Weule, H.
1996. Allg. Hochsch.-Anz. 31 (1996) S. 8
Signale setzen
Weule, H.
1996. Stuttg. Ztg. v. 19.07.1996
Ist das Fachhochschulstudium noch zeitgemäß?
Weule, H.
1996. Die Neue Hochsch. 37 (1996) H. 2
Wir brauchen Innovateure
Weule, H.
1996. Wissenschaftsmanagem. 2 (1996) S. 3
wbk-Karlsruhe - Produktionstechnischer Partner einer Region
Spath, D.; Schmidt, J.
1996. Werkstattstech. 86 (1996) S. 429-432
Automatisierte Montage von Mikrostrukturen
Spath, D.; Thies, U.
1996. wt Werkstattstechnik online, 86 (11/12)
Räumen mit hartstoffbeschichteten HSS-Werkzeugen. Analyse des Einsatzverhaltens verschiedener Titanbasis-Hartstoffschichten beim Außen- und Innenräumen. PhD dissertation
Raab, A.
1996. Karlsruhe 1996. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 64.) Fak. f. Maschinenbau, Diss. v. 15.2.1996., Universität Karlsruhe (TH)
Das Karlsruher Modell - Inhalte und Formen
Osmers, U.; Werner, B.
1996. wt Werkstattstechnik online, 86 (9), 433–437
HIQU-Project: final report
Linnenbuerger, J.
1996. Eur. Community 1996 H. 8
Concept of a robot for interior building trades by the example of wall slits in masonry
Spath, D.; Andres, J.
1996. In: Proceedings of the 13th ISARC, Japan Robot Assoc., Tokyo, Japan 1996. S. 941-948
Objektorientierung in der NC-Fertigung
Spath, D.; Agostini, A.; Fleissner, F.; Walter, W.
1996. Objektorientierte Produktionsarbeit: neue Konzepte für die Fertigung. Hrsg.: H. Rose, 97–118, Campus-Verlag
Waterjet technology as a tool for efficient dismantling of technical products - an new application
Klimmek, M.
1996. In: Jetting technology - applications and opportunities. Ed.: C. Gee. Bury St. Edmunds 1996. (BHR Group conference series publication. 21.)
Verrichtungsorientierte Prüfplanung. Ein neuer Ansatz für eine wirtschaftliche Werkerselbstprüfung
Spath, D.; Burghardt, J.; Fleissner, F.
1996. Qualität und Zuverlässigkeit, 41 (1), 60–63
Meßumgebung in der Simulation. Programmierung von Koordinatenmeßgeräten im virtuellen Raum
Spath, D.; Weber, J.; Osmers, U.
1996. Messen, prüfen, automatisieren, 32 (6), 48–51
ABS - eine Entwicklungsumgebung fuer adaptive Benutzerschnittstellen
Zimek, S.
1993. In: Rapid-Anwenderworkshop, Muenchen 1993
Qualitätsplanung in CAD-Systemen
Spath, D.; Vossmann, D.
1996. In: Tagungsband zum ProE User Meeting, 1996
Intelligent support mechanisms in adaptable human-computer interfaces
Weule, H.; Spath, D.
1993. CIRP ann. 42 (1993)
Elektronisches QM-Handbuch
Spath, D.; Vossmann, D.
1996. Zertifizierung, (1), 60
Zusammenhaenge zwischen den Eigenschaften des Werkstueckstoffes und der Verschleissentwicklung des Schneidstoffes im unterbrochenen Schnitt
Wassmer, R.; Schaupp, J.; Raab, A.
1993. In: DGM-Fortbildungsseminar Werkstoffgefuege und Zerspanung, 15./16.2.1993
Objektorientierte Projektierung von SPS-Software
Spath, D.; Schelberg, H.-J.; Lanza, M.
1996. Transfer 1996 H. 15 S. 40-44
Praxis und Wissenschaft - Untersuchung von Kuehlschmierstoffen beim Fraesen und Raeumen
Wassmer, R.
1993. Castrol Ind., Firmenz. Dt. Castrol Industrieoel GmbH, April 1993
KNOSPE - Ein unterstützendes Planungssystem für die integrierte Montagesystemplanung
Ganghoff, P.; Osmers, U.; Koehne, A.; Naeger, G.
1996. Informatik - Forschung und Entwicklung, 11, 37–43
CAKETool - ein Werkzeug zur Entdeckung von Wissen und automatisiertem Aufbau von Informationssystemen
Steuernagel, R.
1993. In: Tagungsband zum 7. Intellicorp User Meeting, Muenchen 1993
CAKETool - Automatisierung der Informationssystemerstellung
Steuernagel, R.
1993. In: GUIDE-Konferenz, Stuttgart 1993
Möglichkeiten der Automatisierung des Demontageprozesses
Spath, D.; Tritsch, C.
1996. Maschinenmarkt, 102 (6), 26–29
Messen und Regeln im CAD-CAM-CAQ- Informationsverbund
Spath, D.; Weber, J.; Boes, K.
1993. VDI-Z 135 (1993) H. 8 S. 113-116
Simulation als Hilfsmittel zur Beruecksichtigung der Unsicherheit bei der Bewertung von Fertigungssystemalternativen
Schreiber, M.
1993. In: Simulation und Fabrikbetrieb. Hrsg.: ASIM. Muenchen: gfmt 1993. S. 317-332
New perspectives for casting fettling - results of the EU feasibility study "Deburring of castings by the use of water-jet technology"
Spath, D.; Klimmek, M.; Casper, T.
1996. Cast. plant and technol. int. 12 (1996) H. 1 S. 28-33
Optische Bahnvermessung von Industrierobotern
Schmidt, J.; Tritsch, C.
1993. Tech. Rdsch. 85 (1993) H. 35 S. 52-55
Automatische Stoerungsbeseitigung
Schmidt, J.; Steck, W.
1993. Tech. Rdsch. 85 (1993) H. 24 S. 36-39
Roboter im Recycling. Holt Wertstoffe und Problemabfälle aus Waschmaschinen
Spath, D.; Klimmek, M.
1996. Umwelttechnik, (4), 15–16
Finishing of dies and moulds
Schmidt, J.; Schauer, U.
1993. In: Conference proceedings. ISATA ’93, Aachen 1993
Einsatz TiN-beschichteter Raeumwerkzeuge zur Herstellung von Innenverzahnungen
Schmidt, J.; Raab, A.
1993. FVA-Forschungsrep. 1993
Rechnerische Korrektur von Fehlern bei mehrachsigen Fraesmaschinen
Linnenburger, J.; Minges, R.; Schmidt, J.
1993. Tech. Rdsch. 85 (1993) H. 36 S. 54-57
Die Zukunft verlangt neue Kinematiken
Spath, D.; Thies, U.
1996. Roboter + Automation, 14, 46–49
Mobile Systeme als Komponenten einer zukunftsweisenden betrieblichen Informationsverarbeitung
Herrmann, G.
1993. In: Tagungsband zum Workshop "Mobile Teilnehmer in Vernetzten Systemen", Daimler- Benz, Stuttgart 1993
Kinematische Lösungen für Dienstleistungsroboter
Spath, D.; Schmaelzle, A.
1996. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 91 (4), 135–137
UeWADIS-P59: ein Ueberwachungs- und Diagnosesystem fuer Raketentriebwerkspruefstaende
Gapp, R.; Wilke, O.
1993. In: Tagungsband zur 2. Deutschen Expertensystemtagung (XPS-93), Hamburg 1993
Low-Cost-Kinematik des Serviceroboters
Spath, D.; Schmaelzle, A.; Thies, U.
1996. Schweizerische technische Zeitschrift, 93 (4), 10–13
Picant - process integrated cost analysis tool
Eitrich, O.; Vilsmeier, J.
1993. In: Conference proceedings. Aerodays ’93. 2nd Community Aeronautics RTD Conference, Naples 1993
Atmungsfähige Montage
Spath, D.; Lotter, B.; Hartel, M.
1996. Schweizer Maschinenmarkt, 97 (12), 26–28
Technologies for efficient disassembling and dismantling of discarded technical products
Spath, D.; Klimmek, M.; Tritsch, C.
1996. ECO-performance ’96: presentations at the 3rd International Seminar on Life Cycle Engineering, ETH Zurich, Switzerland, March 18-20, 1996. Ed.: R. Züst, 237–244, Verl. Industrielle Organisation
Integration der Qualitaetssicherung in featurebasierte CAD-CAM Prozessketten
Boes, K.
1993. In: Tagungsband des Oeffentlichkeitstags Messen und Regeln im CAD-CAM-CAQ- Informationsverbund, Lehrst. u. Inst. f. Werkzeugmasch. u. Betriebstech., 1993
Innovation for deburring of castings in single-lot and small-lot productions
Spath, D.; Klimmek, M.
1996. Production Engineering, 3 (1)
Recycling-oriented information management: a prerequisite for life cycle engineering
Spath, D.; Hartel, M.; Tritsch, C.
1996. Journal of Engineering Design, 7 (3), 251–264
ROCCO, ein Serviceroboter für die Baubranche - Systemlösung zur flexiblen Automatisierung im Mauerwerksbau
Spath, D.; Andres, J.
1996. Technische Rundschau - Transfer, 88 (13), 18–22
Automatisierte Langgutlagersysteme
Spath, D.; Andres, J.
1996. Praxishandbuch für den Materialwirtschaftsleiter. Aktuelles Nachschlagewerk zum Aufbau und zur Optimierung aller Bereiche der Integrierten Materialwirtschaft mit gebrauchsfertigen Arbeitshilfen, Musterlösungen und Checklisten. Bd. 1-4. Grundwerk. Hrsg.: O. Dück, Kap. 10/5, WEKA-Fachverl
Neue Perspektiven für das Gußputzen
Klimmek, M.
1996. wt Werkstattstechnik online, 86 (4), 211
Präventive Qualitätssicherung in der hybriden Montage variantenreicher Serienprodukte
Hartel, M.
1996. wt Werkstattstechnik online, 86 (4), 211
Mikrozerspanung. Eine interessante Alternative zur Herstellung von Mikrostrukturbauteilen
Spath, D.; Konold, T.
1996. Werkstattstech. 86 (1996) S. 579-582
Flexible, zeitfenstergesteuerte Auftragseinplanung in segmentierten Fertigungsstrukturen. Ein Beitrag zur Nutzung der Potenziale dezentraler Fertigungsstrukturen in der Auftragsabwicklung. PhD dissertation
Barrho, T.
2001. Karlsruhe 2001. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 107.) Fak. f. Maschinenbau, Diss. v. 14.12.2001., Universität Karlsruhe (TH)
Perfektion zum Nachrüsten
Schmidt, J.; Linnenbuerger, J.; Konold, T.
1996. Masch., Anl., Verf. 1996 H. 11
Untersuchungen an Räummaschinen. Einfluß verschiedener Antriebskonzepte auf den Werkzeugverschleiß
Schaupp, J.; Kuebel, M.
1996. wt Werkstattstechnik online, 86, 443–446
PLASMA - Planungsmanagement in verteilten Strukturen
Spath, D.; Debus, F.; Guenther, T.; Riedmiller, S.
1996. wt Werkstattstechnik online, 86, 105–108
Optimization of production systems using a fuzzy expert system and computer simulation
Spath, D.; Weule, H.; Schreiber, M.; Riedmiller, S.
1996. Production Engineering, 3 (2), 127–130
Rechnerunterstützte Fertigungssegmentierung und Planung von Fertigungsmitteln in verteilten Strukturen
Spath, D.; Riedmiller, S.; Debus, F.; Guenther, T.
1996. Arbeits- und Ergebnisbericht / Universität Fridericiana Karlsruhe (Technische Hochschule), Sonderforschungsbereich 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Hrsg.: H. Grabowski, 339–374, Universität Karlsruhe (TH)
Ein Konzept zur marktorientierten Produktentwicklung. Ein Beitrag zur Steigerung der Erfolgsquoten neuer Produkte. PhD dissertation
Geisinger, D.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 94.) Fak. f. Maschinenbau, Diss. v. 2.11.1999., Universität Karlsruhe (TH)
Strategische Fertigungsmittelplanung und -strukturierung in einem dynamischen Umfeld
Spath, D.; Riedmiller, S.
1996. In: Workshopbericht. Sonderforschungsbereich 346. 3/96
Produktionssystemplanung
Spath, D.; Riedmiller, S.
1996. Hütte: Produktion und Management; Betriebshütte, Tl. 2. Hrsg.: W. Eversheim, 10–1, Springer Verlag
Neues Denken im Mittelstand. Kooperation zwischen Industrie und Hochschule
Riedmiller, S.; Guenther, T.; Haacke, J.
1996. wt Werkstattstechnik online, 86, 447–450
Geregelte Nachgiebigkeit bei Räummaschinentrieben - ein Weg zur optimalen Prozeßführung
Schmidt, J.; Wilke, O.
1996. In: 12. Aachener Fluidtechnisches Kolloquium, 1996. S. 327-344
HYDROPS - Ein Tool zur integrierten Auslegung hydraulischer Anlagen
Schmidt, J.; Gapp, R.
1996. In: 12. Aachener Fluidtechnisches Kolloquium, 1996
Werkstückorientierte Facharbeit an NC-Maschinen
Spath, D.
1996. VDI-Nachr. 138 (1996) H. 5 S. 6-8
Wirtschaftliche Investitionsbewertung komplexer Produktionssysteme
Schreiber, M.
1996. Werkstattstech. 86 (1996) S. 94
Offenes adaptives Engineering-Werkzeug zur automatisierten Erstellung von entscheidungsunterstützenden Informationssystemen. PhD dissertation
Steuernagel, R.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 60.) Fak. f. Maschinenbau, Diss. v. 16.12.1994., Universität Karlsruhe (TH)
Mikrozerspanung
Schmidt, J.; Tritschler, H.
2003. In: Kolloquium Mikroproduktion 2003. Hrsg.: J. Hesselbach. Essen 2003. S. 183-191. (Schriftenreihe des Instituts für Werkzeugmaschinen und Fertigungstechnik der TU Braunschweig.)
Micro-production technology moving from manual skills towards automated process chains
Weule, H.; Schmidt, J.; Buchholz, C.; Elsner, J.; Simon, M.; Tritschler, H.
2003. euspen bulletin 2003, April
Investigation on the international state of the art of micro production technology
Weule, H.; Fleischer, J.; Buchholz, C.; Tritschler, H.; Elsner, J.; Knoll, M.; Hesselbach, J.; Raatz, A.; Wrege, J.; Herrmann, H.; Klocke, F.; Weck, M.; Bodenhausen, J. von; Klitzing, A. von
2003. In: Proceedings of European Society for Precision Engineering and Nanotechnology, Aachen, Germany 2003. S. 11-18
Von der Feinwerktechnik zur automatisierten Mikroproduktion
Weule, H.; Fleischer, J.; Schmidt, J.; Buchholz, C.; Tritschler, H.
2003. Mikroproduktion, (1), 8–12
DiHyPro - a diagnostic tool for electro-hydraulic machines
Weule, H.; Fleischer, J.; Gutmann, M.
2003. Production Engineering, 10 (2), 97–100
Das Miniaturisieren von Bauteilen
Walcher, H.; Kugele, H.; Fleischer, J.; Buchholz, C.
2003. Der Stahlformenbauer, (4), 20–24
Klein aber oho! - Miniaturisierung von Bauteilen
Walcher, H.; Kugele, H.; Fleischer, J.; Buchholz, C.
2003. Form + Werkzeug, (4), 46–47
Klein und doch belastbar - Mikrobauteile im Pulverspritzgussverfahren
Walcher, H.; Kugele, H.; Fleischer, J.; Buchholz, C.
2003. wt Werkstattstechnik online, 93 (11), 782–785
Quality gate concept with integrated risk management
Spath, D.; Scharer, M.; Nesges, D.
2003. Production Engineering, 10 (1), 73–76
Preventive quality assurance in the context of micro-mechanical component fabrication
Spath, D.; Fleischer, J.; Elsner, J.
2003. Proceedings of QUALITA 2003: actes du congrés, 5eme Congres International Pluridisciplinaire Qualite & Surete de Fonctionnement, Nancy, France, 18, 19 et 20 mars 2003, 486–494, Institut de sûreté industrielle
Mikrourformen - der SFB 499. Entwicklung, Produktion und Qualitätssicherung urgeformter Mikrobauteile aus metallischen und keramischen Werkstoffen
Spath, D.; Barrho, T.; Knoll, M.; Loehe, D.; Schulze, V.
2003. wt Werkstattstechnik online, 93 (3), 136–140
Prozesskenngrößen beim Gewindefurchen
Schmidt, J.; Lang, H.
2003. VDI-Z Integrierte Produktion, 145 (I), 39–42
Feinbearbeitung von gehärteten Verzahnungen durch Wälzstoßen
Schmidt, J.; Mehr, A.
2003. Zeitschrift für wirtschaftlichen Fabrikbetrieb 98 (2003) H. 10
Harträumen stößt mit CBN in neue Dimensionen vor
Schmidt, J.; Lang, H.
2003. WB Werkstatt + Betrieb, 136 (9), 50–52
Optimierung von Gewindefurchwerkzeugen
Schmidt, J.; Lang, H.
2003. Form + Werkzeug 2003 H. 5
Methodik zur marktorientierten Entwicklung von Werkzeugmaschinen mit Integration von funktionsbasierter Strukturierung und Kostenschaetzung. PhD dissertation
Steitz, T.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 40.) Fak. f. Maschinenbau, Diss. v. 9.7.1992., Universität Karlsruhe (TH)
Monitoring and control of manufacturing molds for powder injection molding
Schmidt, J.; Fleischer, J.; Ruoff, E.
2003. Machine engineering, 3 (1/2), 182–190
Planung der Leittechnik fuer flexible Fertigungsanlagen. PhD dissertation
Frey, V.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 45.) Fak. f. Maschinenbau, Diss. v. 12.11.1992., Universität Karlsruhe (TH)
Anforderungen an die Neuentwicklung einer Wälzschälmaschine - mechatronische Analyse des Maschinenkonzeptes
Schmidt, J.; Felten, K.; Troendle, H.-P.; Bechle, A.
2003. wt Werkstattstechnik online, 93 (7/8), 546–549
Mit Wissenstransfer die Fertigung trockenlegen
Schmidt, J.; Dyck, M.
2003. WB Werkstatt + Betrieb, 136 (1/2), 44–46
Wälzschälen ist 30 % schneller
Schmidt, J.; Bechle, A.
2003. Produktion, (34), 12
Wälzschälen als neues Hochleistungsbearbeitungsverfahren
Schmidt, J.; Bechle, A.
2003. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 98 (11), 589–593
Kalkulation in der Angebotsphase mit dem selbsttaetig abgeleiteten Erfahrungswissen der Arbeitsplanung. PhD dissertation
Feller, A. H.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 46.) Fak. f. Maschinenbau, Diss. v. 3.12.1992., Universität Karlsruhe (TH)
Präzision bei 160.000 Touren
Schmidt, J.; Tritschler, H.; Ebner, R.
2003. Form + Werkzeug, (1)
Auslegung und Optimierung schneller Servopumpen. PhD dissertation
Ziegler, R.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 29.) Fak. f. Maschinenbau, Diss. v. 13.2.1990., Universität Karlsruhe (TH)
Fräser für die Mikrozerspanung
Schmidt, J.; Tritschler, H.; Weinert, K.; Koehler, W.; Westphal, H.; Holland-Letz, K.; Metz, M.; Meineke, O.; Hergert, R.; Malle, K.
2003. dima - die maschine, (5), 24–27
Zerspanende Fertigung und Messtechnik für komplexe Bauteile aus Stahl
Schmidt, J.; Ebner, R.; Munzinger, C.; Stengel, G.; Tritschler, H.
2003. Mikroproduktion, (1), 8–12
Geräuschmessung an Kugelgewindetrieben als Diagnosemöglichkeit
Pieniecki, P.
2003. In: Diagnosemöglichkeiten in Werkzeugmaschinen. Hrsg.: J. Fleischer. Karlsruhe 2003
mikroPRO - Untersuchung zum internationalen Stand der Mikroproduktionstechnik
Hesselbach, J.; Raatz, A.; Wrege, J.; Herrmann, H.; Weule, H.; Buchholz, C.; Tritschler, H.; Knoll, M.; Elsner, J.; Klocke, F.; Weck, M.; Bodenhausen, J. von; Klitzing, A. von
2003. wt Werkstattstechnik online, 93 (3), 119–128
Untersuchung der Zusammenhänge zwischen hydraulischen Messgrößen und Ausfallursachen elektrohydraulischer Stanzmaschinen unter Nutzung vorhandener Überwachungssensoren
Gutmann, M.
2003. Diagnosemöglichkeiten in Werkzeugmaschinen: Tagungsband zum Workshop Diagnose 4. April 2003. Hrsg.: J. Fleischer, Universität Karlsruhe (TH)
Quality simulation for fast ramp up
Fleischer, J.; Spath, D.; Lanza, G.
2003. Proceedings of the 36th CIRP International Seminar on Manufacturing Systems : progress in virtual manufacturing systems ; June 03 - 05, 2003, Saarland University, Saarbrücken, Germany. Ed.: H. Bley, 149 – 154, Universität des Saarlandes, Lehrstuhl für Fertigungstechnik
Qualitätssimulation im Serienanlauf : Vorbestimmte Qualitätsfähigkeitskurven von Elementarprozessen
Fleischer, J.; Spath, D.; Lanza, G.
2003. wt Werkstattstechnik online, 93 (1/2), 50 – 54
Integrative Qualitätssicherung von Mikrobauteilen mittels Microfeatures
Fleischer, J.; Spath, D.; Elsner, J.
2003. Kolloquium Mikroproduktion 2003. Hrsg.: J. Hesselbach, 161–171, Vulkan-Verlag
Discussion of the ability of statistical signal processing methods for the use in predictive tool breaking monitoring in micro milling
Fleischer, J.; Schmidt, J.; Ruoff, E.
2003. In: Proceedings of the euspen International Topical Conference, Aachen 2003. S. 285-288
Kundenorientierte Innovation und Management von Kundenwissen
Fleischer, J.; Klinkel, S.
2003. Customer Knowledge Management. Hrsg.: W. Bungard, 89–104, Fraunhofer IRB Verlag
Wirkstellennahe Positionsmessung bei Parallelkinematiken
Fleischer, J.; Weule, H.; Munzinger, C.
2003. VDI-Z Integrierte Produktion, 145 (4), 61–63
Integration von Handhabung und Bearbeitung - Potentiale zur Flexibilisierung von Produktionsmitteln
Fleischer, J.; Munzinger, C.; Kies, S.; Stengel, G.
2003. wt Werkstattstechnik online, 93 (11), 771–776
Automation of the powder-injection-moulding process for micro-mechanical parts
Fleischer, J.; Buchholz, C.; Weule, H.
2003. CIRP Annals - Manufacturing Technology, 52 (1), 419–422
Harträumen mit CBN. Grundlagenforschung für die Zukunft
Schmidt, J.; Lang, H.
2003. In: Tagungsband. Karlsruher Kolloquium "Verzahnen - Neuentwicklungen für den modernen Produktionsprozess", Karlsruhe 2003. S. 61-72
Simulation von Formhonprozessen
Schmidt, J.; Mehr, A.; Schmidt, C.
2003. Jahrbuch Schleifen, Honen, Läppen und Polieren 61 (2003)
Modelling, simulation and experimental tests for process scaling of cutting processes with geometrically defined edge
Fleischer, J.; Schmidt, J.; Loehe, D.; Schulze, V.; Gumbsch, P.; Delonnoy, L.; Hochrainer, T.; Kotschenreuther, J.
2003. In: Tagungsband. Process Scaling, Bremen 2003
Informationslogistik und Prozessmanagement
Armbruster, M.
2003. In: Informationslogistik und Prozessmanagement. Hrsg.: H. Grabowski. Berlin 2003. Kap. 2.5 + 4
Rechnerunterstützung der informellen Kommunikation in verteilten Unternehmensstrukturen. PhD dissertation
Selinger, G.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 100.) Fak. f. Maschinenbau, Diss. v. 7.7.2000., Universität Karlsruhe (TH)
Bewertungssystem für die Generalüberholung von Montageanlagen. Ein Beitrag zur wirtschaftlichen Gestaltung geschlossener Facility-Management-Systeme im Anlagenbau. PhD dissertation
Schmaelzle, A.
2001. Karlsruhe 2001. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 104.) Fak. f. Maschinenbau, Diss. v. 2.5.2000., Universität Karlsruhe (TH)
Stufenmethode zur Schnittstellengestaltung in der internationalen Produktion. PhD dissertation
Baumgartner, P.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 89.) Fak. f. Maschinenbau, Diss. v. 17.12.1998., Universität Karlsruhe (TH)
Wirtschaftliche Investitionsbewertung komplexer Produktionssysteme unter Berücksichtigung von Unsicherheit. PhD dissertation
Schreiber, M.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 59.) Fak. f. Maschinenbau, Diss. v. 6.12.1994., Universität Karlsruhe (TH)
Entwicklung und Untersuchung eines neuartigen Mischkopfes für das Wasser-Abrasivstrahlschneiden. PhD dissertation
Suchy, U.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 109.) Fak. f. Maschinenbau, Diss. v. 6.12.2001., Universität Karlsruhe (TH)
Quality Gate-Ansatz mit integriertem Risikomanagement. Methodik und Leitfaden zur zielorientierten Planung und Durchführung von Produktentstehungsprozessen. PhD dissertation
Scharer, M.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 108.) Fak. f. Maschinenbau, Diss. v. 17.12.2001 u.d.T.: Quality Gates mit integriertem Risikomanagement ..., Universität Karlsruhe (TH)
Rechnergestützte Modellierungsmethodik zerspantechnologischer Prozesse. PhD dissertation
Sieth, T.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 69.) Fak. f. Maschinenbau, Diss. v. 19.12.1996., Universität Karlsruhe (TH)
Aktive Korrektur von Verlagerungsfehlern in Werkzeugmaschinen. PhD dissertation
Mussa, S.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 110.) Fak. f. Maschinenbau, Diss. v. 8.2.2002., Universität Karlsruhe (TH)
Wissensmanagement in der Produktentwicklung durch Qualitätsmethodenverbund und Qualitätsmethodenintegration. Beitrag zur effektiven und effizienten Entwicklung über alle Produktentstehungsphasen mit dem Ziel der sicheren Qualitätserreichung. PhD dissertation
Vossmann, D.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 90.) Fak. f. Maschinenbau, Diss. v. 18.12.1998., Universität Karlsruhe (TH)
Optimierung der Zerspantechnik beim Fertigungsverfahren Wälzstoßen. Analyse des Potentials zur Trockenbearbeitung. PhD dissertation
Doerfel, O.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 88.) Fak. f. Maschinenbau, Diss. v. 26.11.1998., Universität Karlsruhe (TH)
Projektieren Speicherprogrammierbarer Steuerungen mit Virtual Reality. PhD dissertation
Osmers, U.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 87.) Fak. f. Maschinenbau, Diss. v. 22.10.1998., Universität Karlsruhe (TH)
Konzeption von teilautonomer Gruppenarbeit unter Berücksichtigung kultureller Einflüsse. PhD dissertation
Werner, B.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 86.) Fak. f. Maschinenbau, Diss. v. 21.10.1998., Universität Karlsruhe (TH)
Methode zur Unterstützung der variantengerechten Konstruktion von industriell eingesetzten Kleingeräten. PhD dissertation
Thies, U.
2001. Karlsruhe 2001. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 103.) Fak. f. Maschinenbau, Diss. v. 22.11.2000., Universität Karlsruhe (TH)
Konzeption und Realisierung eines experimentellen Telemanipulators für die Laparoskopie. PhD dissertation
Neisius, B.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 74.) Fak. f. Maschinenbau, Diss. v. 9.7.1997., Universität Karlsruhe (TH)
Konzeption und Realisierung eines fertigungsintegrierten Koordinatenmessgeraetes. PhD dissertation
Hoffmann, C.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 44.) Fak. f. Maschinenbau, Diss. v. 27.10.1992., Universität Karlsruhe (TH)
Unterstützung der Auftragsdurchsetzung in der Fertigung durch Kommunikation über mobile Rechner. PhD dissertation
Posur, M.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 77.) Fak. f. Maschinenbau, Diss. v. 12.2.1998., Universität Karlsruhe (TH)
Kennzahlengestütztes Beratungssystem zur Verbesserung der Logistikleistung in der Werkstattfertigung. PhD dissertation
Loeper, S.
1995. Karlsruhe 1995. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 63.) Fak. f. Maschinenbau, Diss. v. 28.6.1995., Universität Karlsruhe (TH)
Interne Stützung zur Genauigkeitsverbesserung in der Inertialmesstechnik. Beitrag zur Senkung der Anforderungen an Inertialsensoren. PhD dissertation
Reinboth, F.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 97.) Fak. f. Maschinenbau, Diss. v. 29.6.2000., Universität Karlsruhe (TH)
Rechnerunterstuetzte Qualitaetssicherung bei der Produktion von Bauteilen mit frei geformten Oberflaechen. PhD dissertation
Klein, H.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 43.) Fak. f. Maschinenbau, Diss. v. 27.10.1992., Universität Karlsruhe (TH)
Wissensbasierte Projektierung elektrohydraulischer Regelungen. PhD dissertation
Richter, M.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 41.) Fak. f. Maschinenbau, Diss. v. 16.7.1992., Universität Karlsruhe (TH)
Objektorientierte Projektierung von Steuerungssoftware
Schmidt, J.; Schelberg, H.-J.
1991. VDI-Z. 133 (1991) Nr. 12 S. 60-65
Variables Formhonen durch rechnergestuetzte Honprozesssteuerung. PhD dissertation
Zurrin, R.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 26.) Fak. f. Maschinenbau, Diss. v. 6.2.1990., Universität Karlsruhe (TH)
Beitrag zur Optimierung des Honprozesses durch den Aufbau einer Honprozeßregelung. PhD dissertation
Plass, M.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 91.) Fak. f. Maschinenbau, Diss. v. 9.2.1999., Universität Karlsruhe (TH)
Verbesserung bestehender Geschäftsprozesse durch eine mitarbeiterorientierte Informationsversorgung. PhD dissertation
Windmueller, T.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 101.) Fak. f. Maschinenbau, Diss. v. 23.10.2000., Universität Karlsruhe (TH)
Automatisierung der Feinbearbeitung in der Fertigung von Hohlformwerkzeugen. PhD dissertation
Timmermann, S.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 32.) Fak. f. Maschinenbau, Diss. v. 22.11.1990., Universität Karlsruhe (TH)
Informationsmanagement für mehrstufige Mikro-Fertigungsprozesse. Prozessdaten- und Produktdatenstrukturierung mittels Microfeatures am Beispiel des Mikro-Pulverspritzgießprozesses. PhD dissertation
Elsner, J.
2003. Karlsruhe 2003. (Forschungsberichte aus dem wbk Institut für Produktionstechnik, Universität Karlsruhe (TH). 119.) Fak. f. Maschinenbau, Diss. v. 4.12.2003., Universität Karlsruhe (TH)
Optical tool wear measurement and estimation of tool life travel for milling. PhD dissertation
Weis, W.
1995. Karlsruhe 1995. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik. 61.) Fak. f. Maschinenbau, Diss. v. 24.1.1995 u.d.T.: Optische Werkzeugverschleißmessung und Standwegprognose für das Fertigungsverfahren Fräsen., Universität Karlsruhe (TH)
Analyse, Modellbildung und Optimierung des Betriebsverhaltens von Kugelgewindetrieben. PhD dissertation
Golz, H. U.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 31.) Fak. f. Maschinenbau, Diss. v. 22.11.1990., Universität Karlsruhe (TH)
Wissensbasierte Planung der Aufbau- und Ablaufstruktur von Montagesystemen
Schmidt, J.; Ganghoff, P.
1991. VDI-Z. 133 (1991) Nr. 11 S. 85-92
Verbesserung der Genauigkeit beim fuenfachsigen Fraesen von Freiformflaechen. PhD dissertation
Minges, R.
1993. Karlsruhe 1993. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 48.) Fak. f. Maschinenbau, Diss. v. 14.12.1992., Universität Karlsruhe (TH)
Rechnergestuetzte Pruefplanung im Informationsverbund moderner Produktionssysteme. PhD dissertation
Wilhelm, M. C.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 15.) Fak. f. Maschinenbau, Diss. v. 13.12.1988., Universität Karlsruhe (TH)
Methoden zur rechnergestuetzten Konfiguration von Fertigungsanlagen. PhD dissertation
Wieser, R.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 19.) Fak. f. Maschinenbau, Diss. v. 14.2.1989., Universität Karlsruhe (TH)
Werkstattsteuerung bei wechselnder Auftragsstruktur. Ein Ansatz zur rechnerunterstuetzten Maschinenbelegungsplanung. PhD dissertation
Schmitt, E.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 20.) Fak. f. Maschinenbau, Diss. v. 12.7.1989., Universität Karlsruhe (TH)
Entwurf eines Programmsystems zur wissensbasierten Planung und Konfigurierung. PhD dissertation
Ochs, M.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 16.) Fak. f. Maschinenbau, Diss. v. 13.12.1988., Universität Karlsruhe (TH)
Beanspruchungsanalyse der Werkzeugschneiden beim Stirnplanfraesen. PhD dissertation
Ludwig, H.-R.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 18.) Fak. f. Maschinenbau, Diss. v. 9.2.1989., Universität Karlsruhe (TH)
Accuracy-tests for industrial robots
Hoffmann, C.
1989. In: Robot Control 1988 (SYROCO’88). Ed.: U. Rembold. Karlsruhe 1989. S. 103-108. (IFAC proceedings series. 1989,10.)
Verfuegbarkeitssteigerung automatisierter Montagesysteme durch selbsttaetige Behebung prozessbedingter Stoerungen. PhD dissertation
Enderle, W.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 21.) Fak. f. Maschinenbau, Diss. v. 13.7.1989., Universität Karlsruhe (TH)
Rechnergestuetzte Strukturplanung von Produktionssystemen. PhD dissertation
Buchberger, D.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 22.) Fak. f. Maschinenbau, Diss. v. 12.7.1989., Universität Karlsruhe (TH)
Qualitätsorientierte Feinbearbeitung mit Industrierobotern. Regelungsansatz für die Freiformflächenfertigung des Werkzeug- und Formenbaus. PhD dissertation
Schauer, U.
1995. Karlsruhe 1995. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 62.) Fak. f. Maschinenbau, Diss. v. 8.2.1995., Universität Karlsruhe (TH)
Langhub-Innenrundhonen von Grauguss und Stahl mit einem elektromechanischen Vorschubsystem. PhD dissertation
Bergen, K.-H.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 27.) Fak. f. Maschinenbau, Diss. v. 13.2.1990., Universität Karlsruhe (TH)
Unterstützung der Produktionsplanung in der Halbleiterfertigung durch risikoberücksichtigende Betriebskennlinien. PhD dissertation
Brath, J.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 93.) Fak. f. Maschinenbau, Diss. v. 5.7.1999., Universität Karlsruhe (TH)
Rechnerintegrierte Erstellung und Verifikation von Steuerungsprogrammen als Komponente einer durchgaengigen Planungsmethodik. PhD dissertation
Lenschow, R.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 34.) Fak. f. Maschinenbau, Diss. v. 3.7.1991., Universität Karlsruhe (TH)
Erfolgversprechende Muster für betriebliche Ideenfindungsprozesse. Ein Beitrag zur Steigerung der Innovationsfähigkeit. PhD dissertation
Walter, W.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 75.) Fak. f. Maschinenbau, Diss. v. 1.7.1997., Universität Karlsruhe (TH)
Unterstützung der NC-Verfahrenskette durch ein bearbeitungselementorientiertes, lernfähiges Technologieplanungssystem. PhD dissertation
Burghardt, J.
1996. Karlsruhe 1996. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 65.) Fak. f. Maschinenbau, Diss. v. 14.2.1996., Universität Karlsruhe (TH)
Entwicklung neuer Verfahren zur automatisierten Erfassung der geometrischen Abweichungen an Linearachsen und Drehschwenkköpfen. PhD dissertation
Linnenbuerger, J.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 70.) Fak. f. Maschinenbau, Diss. v. 29.4.1997., Universität Karlsruhe (TH)
Verbesserung der Zylinderlängsform durch einen geometriegeregelten Honprozess
Schmidt, J.; Mehr, A.
2002. Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 378–395, Vulkan-Verlag
Adaptierbare und adaptive Benutzerschnittstellen. PhD dissertation
Loeffler, L.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 24.) Fak. f. Maschinenbau, Diss. v. 1.12.1989., Universität Karlsruhe (TH)
Rechnerunterstuetzte Schnittwertoptimierung beim Fraesen
Buchholz, T.; Kuhn, R.
1989. VDI-Z. 131 (1989) Nr. 1 S. 59-62
BizTalk server orchestration
Rus, T.
2002. BizTalk server: the complete reference. Ed.: D. Lowe, Osborne/McGraw-Hill
Integration von Produktentwicklung und Montageplanung durch neue, rechnerunterstuetzte Verfahren. PhD dissertation
Friedmann, T.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 25.) Fak. f. Maschinenbau, Diss. v. 4.12.1989., Universität Karlsruhe (TH)
Messen und Digitalisieren von Freiformflaechen unter Einsatz von CAD- Systemen
Weule, H.; Klein, H.
1990. In: Fertigungsmesstechnik und Qualitaetssicherung. Duesseldorf 1990. S. 1-17. (VDI-Berichte. 836.)
Rechnerunterstuetzte Technologieplanung fuer die flexibel automatisierte Fertigung von Abkantteilen. PhD dissertation
Fleischer, J.
1989. Karlsruhe 1989. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 23.) Fak. f. Maschinenbau, Diss. v. 28.11.1989., Universität Karlsruhe (TH)
Advanced orchestration
Rus, T.
2002. BizTalk server: the complete reference. Ed.: D. Lowe, 329, Osborne/McGraw-Hill
Montagesystemorientierte Produktanalyse und -bewertung
Schmidt, J.; Bernhart, W.
1991. VDI-Z. 133 (1991) Nr. 10 S. 88-91
Beeinflussung der tribologischen Eigenschaften im Betrieb durch Tribomutation beim Schleifen, Honen und Rollieren
Schmidt, J.; Mehr, A.; Gerve, A.; Mach, W.
2002. Jahrbuch Schleifen, Honen, Läppen und Polieren: Verfahren und Maschinen, 502–511, Vulkan-Verlag
Rechnergestuetzter Wissenserwerb zur Erstellung von Ueberwachungs- und Diagnoseexpertensystemen fuer hydraulische Anlagen. PhD dissertation
Noe, T.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 33.) Fak. f. Maschinenbau, Diss. v. 3.7.1991., Universität Karlsruhe (TH)
Wissensbasierte Unterstuetzung der Planung technischer Systeme. Konzeption eines Planungswerkzeuges und exemplarische Anwendung im Bereich der Montagesystemplanung. PhD dissertation
Ganghoff, P.
1993. Karlsruhe 1993. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 50.) Fak. f. Maschinenbau, Diss. v. 8.7.1993., Universität Karlsruhe (TH)
Flexible Demontage technischer Gebrauchsgüter. Ansatz zur Planung und (teil-)automatisierten Durchführung industrieller Demontageprozesse. PhD dissertation
Tritsch, C.
1996. Karlsruhe 1996. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 66.) Fak. f. Maschinenbau, Diss. v. 5.7.1996., Universität Karlsruhe (TH)
Raeumen gehaerteter Werkstoffe mit kristallinen Hartstoffen. Grundlagen, Prozessanalyse, Werkzeugoptimierung. PhD dissertation
Kallabis, M.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 35.) Fak. f. Maschinenbau, Diss. v. 3.7.1991., Universität Karlsruhe (TH)
Integrierte Montageplanung
Schmidt, J.; Bernhart, W.; Schelberg, H.-J.; Steuernagel, R.
1991. VDI-Z. 133 (1991) Nr. 8 S. 32-34
Objektorientierte Projektierung von SPS- Software. PhD dissertation
Schelberg, H.-J.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 57.) Fak. f. Maschinenbau, Diss. v. 12.7.1994., Universität Karlsruhe (TH)
Ansaetze zur Automatisierung der Feinbearbeitung
Timmermann, S.
1991. In: Konstruktion und Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 277-299
Einfluesse des Festwalzens auf die Eigenspannungsverteilung und die Dauerfestigkeit einsatzgehaerteter Zahnraeder. PhD dissertation
Liebisch, A.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 28.) Fak. f. Maschinenbau, Diss. v. 11.7.1990., Universität Karlsruhe (TH)
Robotersysteme für den Wohnungsbau. Beitrag zur Automatisierung des Mauerwerksbaus und der Elektroinstallation auf Baustellen. PhD dissertation
Andres, J.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 81.) Fak. f. Maschinenbau, Diss. v. 23.6.1998., Universität Karlsruhe (TH)
Pruefen von Freiformgeometrien - ein Element der Qualitaetssicherung
Klein, H.
1991. In: Konstruktion und Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 185-202
Effectiveness of knowledge management - a process based survey method
Fleischer, J.; Stepping, A.
2003. In: Current trends in production management. Ed.: G. Zülch. Aachen 2003. S. 188-194. (European series in industrial management. 6.)
Geometrieanalyse fuer die NC-Programmierung
Minges, R.
1991. In: Konstruktion und Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 149-160
Flexible automation in masonry construction
Weule, H.; Spath, D.; Andres, J.
1995. Production Engineering, 2 (2)
Leistungssteigerung durch optimierten Einsatz beschichteter HSS-Räumwerkzeuge
Schmidt, J.; Raab, A.
1995. Forschungsreport 1995 / Forschungsvereinigung Antriebstechnik e.V.: vorgelegt anlässlich der Informationstagung des Wissenschaftlichen Beirats der FVA am 14./15. November 1995 in Bad Soden/Taunus [Taunus-Tagungs-Zentrum]; Berichtszeitraum 1994/1995, Forschungsvereinigung Antriebstechnik e. V. (FVA)
Umwelt- und recyclinggerechte Produktentwicklung
Hartel, M.
1995. In: Logistik in der Produktion. Mitarb.: H.O. Dück. Augsburg (Losebl.-Ausg.). Kap. 11.4.1
Stand und Tendenzen bei der Fertigung von Freiformflaechen
Weule, H.; Schauer, U.
1991. In: Konstruktion und Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 7-31
Konzeption eines reaktionsschnellen Planungssystems für Logistikketten auf Basis von Software-Agenten. Ansatz zur Planung und Steuerung von verteilten Produktionssystemen mit heterogenen IV-Systemen. PhD dissertation
Stiefbold, O.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 84.) Fak. f. Maschinenbau, Diss. v. 13.7.1998., Universität Karlsruhe (TH)
Einfluß von Kühlschmierstoff auf den Zerspanprozeß beim Fräsen. Beitrag zum Prozeßverständnis auf Basis von zerspantechnischen Untersuchungen. PhD dissertation
Walter, U.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 85.) Fak. f. Maschinenbau, Diss. v. 16.7.1998., Universität Karlsruhe (TH)
CAD-KMG-Kopplung zum on-line Messen
Klein, H.
1991. In: Abschlusspraesentation zum EUREKA- Projekt: Qualitaetsorientierte Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 37-52
Analyse der Geometrieparameter von Präzisionsgewinden auf der Basis einer Least-Squares-Estimation. Entwurf eines Verfahrens zur Gewindevermessung in der Qualitätssicherung. PhD dissertation
Tilch, D.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 83.) Fak. f. Maschinenbau, Diss. v. 30.6.1998., Universität Karlsruhe (TH)
Analyse einer fuenfachsigen Fraesmaschine
Minges, R.
1991. In: Abschlusspraesentation zum EUREKA- Projekt: Qualitaetsorientierte Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 23-31
EUREKA Projekt "Qualitaetsorientierte Fertigung von Freiformflaechen" - eine Uebersicht
Fleischer, J.
1991. In: Abschlusspraesentation zum EUREKA- Projekt: Qualitaetsorientierte Fertigung von Freiformflaechen. Red.: K. Boes. Karlsruhe 1991. S. 7-19
Konzeption und Umsetzung eines Leitfadens zum industriellen Einsatz von Data-Mining. PhD dissertation
Kafka, C.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 99.) Fak. f. Maschinenbau, Diss. v. 5.7.1999., Universität Karlsruhe (TH)
Flexible autonome Fertigunszellen mit Laser fuer Blechteile in kleinen Losgroessen
Fontaine, J.; Keith, B.; Nagel, H.-H.; Rembold, U.; Arnold, D.; Weule, H.
1990. In: Jahresbericht 1989. Deutsch- Franzoesisches Institut fuer Automation und Robotik. Karlsruhe 1990. S. 25-29
MikroPRO: Untersuchung zum internationalen Stand der Mikroproduktionstechnik
Weule, H.; Knoll, M.; Tritschler, H.; Buchholz, C.
2002. Vulkan-Verlag
Werkstattplanung und -steuerung mit Multi-Agenten-Systemen
Stiefbold, O.
1999. wt Werkstattstechnik online, 89 (1/2), 12
Fingerabdruck im Bauschutt
Spath, D.; Schmaelzle, A.; Reich, U.
1999. Umwelttechnik 1999 H. 9
Bevorratungsarme Montage in hybriden Montagesystemen - Modularisierung in der absatzsynchronen, flexiblen Montage
Spath, D.; Baumeister, M.
1999. In: Tagungsband. 15. Deutscher Montagekongress. Landsberg : Verl. Mod. Ind. 1999
Erfolgreich in dynamischen Märkten: Beherrschung von Innovationssprüngen
Spath, D.; Barrho, T.; Pamme, S.; Scharer, M.
1999. In: Tagungsband zu wbk-Herbsttagung "Erfolgreich in dynamischen Märkten", Karlsruhe 1999
Coefficient based assessment methods for life cycle design
Spath, D.; Trender, L.; Scharer, M.
1999. In: Proceedings on 1st International Conference on Environmental Conscious Design and Inverse Manufacturing, Tokyo, Japan 1999
Flexible Methodenunterstützung der Prozeßkette "Vom Markt zum Produkt": Konzept zur flexiblen, unternehmensspezifisch angepassten Methodenbereitstellung
Spath, D.; Barrho, T.; Scharer, M.
1999. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 95 (9), 517–520
Estimation of tool wear of carbide tool in orthogonal cutting using FEM simulation
Yen, Y. C.; Soehner, J.; Weule, H.; Schmidt, J.; Altan, T.
2002. Machining science and technology, 6 (3), 467–486
Simulation of a torque converter production considering quality attributes
Sternemann, K.-H.; Didic, M.; Hofer, H.
1999. Computers in ind. 40 (1999) H. 2/3
Context sensitive provision and visualisation of enterprise information with hypermedia based system
Sternemann, K.-H.; Zelm, M.
1999. Computers in ind. 40 (1999) H. 2/3
Wissen aufspüren
Spath, D.; Vossmann, D.
1999. Qualität und Zuverlässigkeit, 44 (6), 724
Monitoringsysteme preisgünstig entwickeln durch lernende Systeme
Spath, D.; Hellmann, D.; Kafka, C.; Ruoff, E.
1999. Industrie Management, (2), 46
Zielorientiertes Engineering Data Management durch Axiomatic Design
Spath, D.; Lanza, M.
1999. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (3)
A change of paradigm for planning life-cycle optimized and innovative products
Zuest, R.; Matt, D.; Geisinger, D.; Winkler, R.
1999. In: 12th International Conference on Engineering Design, ICED, 1999. Zürich : Ed. Heurista 1999. (wdk Schriftenreihe.)
Von der technologiegetriebenen zur marktorientierten Produktentwicklung
Weule, H.; Geisinger, D.
1999. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 94 (7), 7–8
Systematisch marktgetriebene und innovative Erfolgsprodukte generieren
Weule, H.; Geisinger, D.
1999. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 94 (9), 534–538
Integrierte Projektierung am Beispiel der rechnergestützten Aggregatauslegung
Weule, H.; Lembke, K.
1999. O+P Ölhydraulik und Pneumatik, 43 (2), 113–117
Advantages and characteristics of a dynamic feed axis with ball screw drive and driven nut (2)
Weule, H.; Frank, T.
1999. CIRP Annals - Manufacturing Technology
ACCOMAT - Die genauigkeitsgeregelte Maschine
Spath, D.; Mussa, S.
1999. wt Werkstattstechnik online, 89 (5), 231
Aufarbeitung in der Montageanlagenindustrie
Weule, H.; Schmaelzle, A.
1999. Z. f. wirtschaftl. Fabrikbetr. 1999 H. 6
Das International Department der Universität Karlsruhe (TH)
Weule, H.; Suchy, U.
1999. Campus Internationale? Entwicklungen und Perspektiven des Ausländerstudiums am Beispiel der Universität Karlsruhe (TH). Hrsg.: C. Y. Robertson-Wensauer, 177–185, Interfakultatives Institut für Angewandte Kulturwissenschaft
Dry machining for gear shaping
Weule, H.; Schmidt, J.; Doerfel, O.; Huehsam, A.
1999. Production Engineering, 6 (1), 25–28
Durchgängige Genauigkeitssteigerung in der Produktion. ACCOMAT (Accuracy Controlles Machine Tool)
Spath, D.; Plutowsky, A.
1999. Qualität und Zuverlässigkeit, (2), 223–224
Potentials of microsystems technology
Schuenemann, M.; Huentrup, V.; Bierhals, R.
1999. MST-news 1999 H. 2
Möglichkeiten und Grenzen der Mikrozerspanung
Wenda, A.; Beck, M.; Huentrup, V.; Meisel, M.; Rothenburg, M.; Ruebenach, O.; Schwietering, C.; Gaebler, J.
1999. F & M: Feinwerktechnik, Mikrotechnik, Mikroelektronik, 107 (11), 64–67
Mikrofräsbearbeitung für den Werkzeug- und Formenbau. Mikrozerspante Formeinsätze aus Stahl
Schmidt, J.; Huentrup, V.; Tritschler, H.
1999. wt Werkstattstechnik online, 89 (11/12), 495–498
Potentiale der Mikrosystemtechnik aus industrieller Sicht. Wirtschaftliche Potentiale der Miniaturisierung - Fertigungstechnik als Schlüssel für den Durchbruch?
Weule, H.; Huentrup, V.; Thies, U.; Schuenemann, M.; Bierhals, R.
1999. wt Werkstattstechnik online, 89 (11/12), 481–484
Microcutting of steel. Micromilling of ferrous materials
Weule, H.; Schmidt, J.; Huentrup, V.; Tritschler, H.
1999. Production Engineering, 6 (2)
Chef mit Forscherhorizont
Weule, H.; Huentrup, V.
1999. Wissenschaftsmanagement, (1/2), 12–18
An approach to generate optimized tool paths for 5-axis milling
Weule, H.; Schmidt, J.; Konold, T.
1999. Production Engineering, 6 (1), 133–136
Rechnerunterstützte Produktion mit fünfachsigen spanenden Bearbeitungseinrichtungen
Schmidt, J.; Stroehle, H.; Storr, A.; Konold, T.
1999. wt Werkstattstechnik online, 89 (3), 78–82
Service Engineering. Ergebnisse der empirischen Studie zum Stand der Dienstleistungsentwicklung in Deutschland
Baumeister, M.; Demuss, L.; Fähnrich, K.-P.; Meiren, T.; Barth, T.; Hertweck, A.; Gaiser, B.; Zerr, K.
1999. Fraunhofer IRB Verlag
Modelling and engineering of honed microtopography
Rosen, B.-G.; Ohlsson, R.; Plass, M.; Thomas, T. R.
1999. In: Proceedings of the 1st International Conference of the European Society for Precision Engineering and Nanotechnology, Bremen 1999. Vol. 2
Economic potentials of miniaturization from an industrial viewpoint. Abschlußbericht zur Studie des Wirtschaftsministeriums
Bierhals, R.; Cuhls, K.; Huentrup, V.; Schuenemann, M.; Thies, U.; Weule, H.
1999. MST news, (2), 34–36
Wirtschaftliche Potentiale der Miniaturisierung aus industrieller Sicht. Abschlußbericht zur Studie des Wirtschaftsministeriums
Bierhals, R.; Cuhls, K.; Huentrup, V.; Schuenemann, M.; Thies, U.; Weule, H.
1999. 1999
Micro-milling of steel for mold manufacturing-influences of material, tool and process parameters
Spath, D.; Huentrup, V.
1999. In: Proceedings of the 1st International Conference of the European Society for Precision Engineering and Nanotechnology, Bremen 1999. Vol. 1
Integrierte Methode zur Unterstützung der informellen Kommunikation im fertigungsnahen Umfeld: Anforderungen - Systemgestaltung - Analysen
Spath, D.; Bungard, W.; Bismarck, W.-B. v.; Selinger, G.
1999. Arbeits- und Ergebnisberichte. Sonderforschungsbereich 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen, 1997-1999, 161–194, Universität Karlsruhe (TH)
Methodische Gestaltsfindung durch Konstruktionsarbeit und Planungsräume
Spath, D.; Grabowski, H.; Agostini, A.
1999. In: Arbeits- und Ergebnisberichte. SFB 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. 1997-1999. Karlsruhe : RPK 1999
Bewertung und Optimierung von Bearbeitungsobjekten aus fertigungstechnologischer Sicht
Spath, D.; Konold, T.
1999. In: Arbeits- und Ergebnisberichte. SFB 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. 1997-1999. Karlsruhe : RPK 1999
Verschleißentwicklung im tribologischen System Fräsen
Wassmer, R.
1995. wt - Produkt. u. Managem. 85 (1995) S. 509
In-process-Geometriemessung beim Honen
Uebelhoer, P.
1995. wt - Produkt. u. Managem. 85 (1995) S. 502
Objektorientierte Projektierung von SPS-Software
Schelberg, H.-J.
1995. wt - Produkt. u. Managem. 85 (1995) S. 532
Qualitätsorientierte Feinbearbeitung mit Industrierobotern
Schauer, U.
1995. wt - Produkt. u. Managem. 85 (1995) S. 528
Rechnergestütztes Planungsmanagement
Debus, F.
1995. wt - Produkt. u. Managem. 85 (1995) S. 544
Industrieroboter für recyclinggerechte Demontage
Tritsch, C.
1995. UniKaTH, 26 (4), 10
Dynamische, maschinenintegrierte Werkzeugvermessung
Spath, D.; Weis, W.; Huentrup, V.
1995. Werkzeuge, 62–64, VDI Verlag
Flexible Demontage technischer Gebrauchsgüter - eine Voraussetzung für zukunftsorientierte Recyclingkonzepte
Spath, D.; Tritsch, C.
1995. Technische Rundschau - Transfer, 87 (18), 12–15
Recyclinggerecht Montieren - wirtschaftlich Demontieren
Spath, D.; Tritsch, C.; Hartel, M.
1995. Umweltwirtschaftsforum 3 (1995) Nr. 4 S. 86-90
Life-cycle-assessment: tools to support environmental product design and economical disassembly of technical consumer products
Spath, D.; Hartel, M.; Tritsch, C.
1995. In: Proceedings. ICED - International Conference on Engineering Design, Prague 1995. S. 1066-1072
Absatzsynchrone Montageplanung - Investitionsentscheidungen zeitlich vorausschauend absichern
Spath, D.; Hartel, M.
1995. Tagungsband / Qualität, Kosten, Zeit - Erfolgsfaktoren für die Montage; 12. Deutscher Montagekongreß, München, 10. - 11. Oktober 1995, Tagungsort: Ramada-Hotel, München-Freising, Flughafen, 3, Verl. Moderne Industrie
Montagefehler frühzeitig vermeiden - Qualitätssteigerung durch präventiven Verfahrensansatz bei Variantenprodukten
Spath, D.; Hartel, M.; Kohlmeyer, R.
1995. Kontrolle - Qualitätssicherung in der Produktion, (9), 4–6
Präventive Qualitätssicherung in der Montage
Spath, D.; Hartel, M.
1995. Uni-Information Karlsruhe, 26 (198), 14
Neue Perspektiven für das Gußputzen
Spath, D.; Klimmek, M.
1995. Gießerei 82 (1995) S. 551-555
Recyclinggerechte Produktentwicklung
Spath, D.; Trender, L.; Hartel, M.; Thierer, J.
1995. Technische Rundschau - Transfer, 87 (42), 18–22
Automatisierte Langgutlagersysteme: Bauarten, Planung und Integration
Spath, D.; Andres, J.
1995. Zeitschrift für Logistik, 16 (1), 5–11
Process integrated cost analysis tool - PICANT
Spath, D.; Eitrich, O.
1995. In: Conference proceedings. Interregional Congress on Research and Technological Development in Europe, Stuttgart 1995
Karlsruher Produktionstechnik Kooperation - Das Institut für Werkzeugmaschinen und Betriebstechnik (wbk)
Spath, D.; Eitrich, O.
1995. Ind. & Hand., Karlsruhe 51 (1995) H. 1 S. 20-21
Vorteile objektorientierter Datenhaltung in der Technologieplanung
Spath, D.; Sieth, T.; Kuhn, R.
1995. Wt - Produktion und Management, 85, 195–199
Aus Erfahrung gut. Die Rückführung von Erfahrungsdaten verbessert die NC-Programmerstellung
Spath, D.; Burghardt, J.; Walter, W.
1995. AV Die Arbeitsvorbereitung, 32 (4), 267–271
Erfahrungen aus einem Zertifizierungsaudit
Schobrick, H.; Reinboth, F.; Walter, W.
1995. F+H Fördern und Heben, 45 (10), 741–743
Prozeßregelung beim flexiblen Umformen mit Bearbeitungszentren durch Rückführung von Qualitätsinformationen
Schmidt, J.; Klimmek, M.
1995. In: Abschlußkolloquium zum DFG- Schwerpunktprogramm Flexible Umformtechnik. Aachen 1995
Realistische Kosten erfassen - schon in der Entwicklung
Schmidt, J.; Eitrich, O.
1995. Technische Rundschau - Transfer, 87 (19), 26–29
Entwicklungsbegleitende Vorkalkulation
Schmidt, J.; Eitrich, O.
1995. Konstruktion, 47 (5), 161–167
Untersuchung der Zusammenhänge zwischen Hauptspindelantriebsdynamik und dem Zerspanprozeß beim Fräsen
Schmidt, J.; Schaupp, J.
1995. Schwingungen in Antrieben: Analyse, Beurteilung, Beeinflussung, Überwachung; Tagung Veitshöchheim 25. und 26. Sept. 1995, 483–496, VDI Verlag
Productivity oriented process-planning and control for production
Spath, D.; Matt, D.; Riedmiller, S.; Selinger, G.
1998. In: Proceedings of the CIRP Seminar on Manufacturing Systems, Univ. of Calif., Berkeley 1998
Visualisieren, Simulieren, Animieren - VR erweckt Ihre Planungen zum Leben
Osmers, U.
1995. Informationen für die Wirtschaft - Zeitschrift der Industrie- und Handelskammer Nordschwarzwald, (9), 29–39
Integrated product development by using planning work areas and design work areas
Spath, D.; Grabowski, H.; Agostini, A.
1998. In: New tools and workflows for product development. CIRP Seminar STC Design, Berlin 1998. Ed.: F.-L. Krause. Stuttgart 1998. S. 257-268
Servopumpenantrieb für Differentialzylinder
Feuser, A.; Dantlgraber, J.; Spath, D.; Wilke, O.
1995. O+P Ölhydraulik und Pneumatik, 39 (7), 540–544
Wirkmechanismen und Verschleißanalyse im Tribosystem Zerspanung
Brinksmeier, E.; Riemer, O.; Meyer, W.; Schmidt, J.; Walter, U.
1995. In: Berichtsband des Kolloquiums zum DFG- Schwerpunktprogramm Wirkflächenreibung bei inelastischer Verformung metallischer Werkstoffe, Hannover 1995. S. 57-74
Automatische Erstellung von Prüfplänen und Prüfzeichnungen in CAD-Systemen
Spath, D.; Vossmann, D.
1995. In: Tagungsband zur Forschungstagung Qualität ’95 der Forschungsgemeinschaft Qualitätssicherung e.V. (FQS). Berlin 1995. (FQS-Schrift. 80,95.)
A fault tolerant assembly tool for the masonry robot system ROCCO
Andres, J.
1995. Product and process modelling in the building industry: proceedings of ECPPM’94, the First European Conference on Product and Process Modelling in the Building Industry, Dresden, Germany, 5 - 7 October 1994. Ed.: R. J. Scherer, 599–604, Balkema
Internationalität - Hochschulausbildung in einer globalisierten Welt
Weule, H.
2000. Die Technische Universität an der Schwelle zum 21. Jahrhundert: Festschrift zum 175jährigen Bestehen der Universität Karlsruhe (TH). Hrsg.: H. Kunle, 323–334, Springer Verlag
Flexibel einsetzbares, modulares Bildverarbeitungssystem
Huentrup, V.
1998. wt Werkstattstechnik online, 88 (11/12)
Fast measurement of errors in geometry of a birotary milling head
Spath, D.; Schmidt, J.; Konold, T.; Linnenbuerger, J.
1998. Production Engineering, 5 (2), 43–46
Automatische Sortiersysteme
Spath, D.; Reich, U.; Schmaelzle, A.
1998. Baustoff-Recycling + Deponietech. 14 (1998) H. 4 S. 73-75
Kontinuierliche Leistungssteigerung durch Unterstützung der Dynamik beim Business Process Reengineering
Spath, D.; Matt, D.; Selinger, G.
1998. In: Proceedings der 21. Europäischen Congressmesse für Technische Kommunikation, Online 98, Düsseldorf 1998
Market driven process and structure innovation
Spath, D.; Matt, D.; Riedmiller, S.; Selinger, G.
1998. The time is now: proceedings, European conference / Product Data Technology Days 1998, 25th - 26th March 1998, Building Research Establishment, Garston, Watford, UK, 181–187, Quality Marketing Services
Continous improvement of productivity by market-driven process and structure innovation
Spath, D.; Matt, D.; Riedmiller, S.; Selinger, G.
1998. Proceedings / ICME 98, CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, July 1 - 3, 1998, Capri, Italy. Ed.: Roberto Teti, 399–405, CUES
Aufbruch zu neuen Märkten - Unterstützung der Prozeßkette "Vom Markt zum Produkt"
Spath, D.; Matt, D.; Riedmiller, S.; Scharer, M.
1998. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 93 (1/2), 12–14
The communication circle. A model for the support of a market-driven development and production of innovative products
Spath, D.; Matt, D.; Riedmiller, S.
1998. In: New tools and workflows for product development. CIRP Seminar STC Design, Berlin 1998. Ed.: F.-L. Krause. Stuttgart 1998
Qualitätsplanung vernetzen
Spath, D.; Kobinger, J.; Musiol, R.; Schnurrer, J.; Vossmann, D.
1998. Qualität und Zuverlässigkeit, 43 (5), 567–572
MaLVe - Ein intelligentes Werkzeug zur Unterstützung des Vertriebes
Spath, D.; Kafka, C.; Weger, H.-J.
1998. Industrie Management, (5), 63–68
Low-cost Störungsfrüherkennung durch Maschinelles Lernen
Spath, D.; Hellmann, D.-H.; Kafka, C.; Kafka, T.
1998. PIK - Praxis der Informationsverarbeitung und Kommunikation, 21 (4), 228–230
Automatische Modellbildung für Störungsfrüherkennungssysteme
Spath, D.; Hellmann, D.-H.; Kafka, C.; Kafka, T.
1998. Industriebedarf 1998, Okt
Intelligente Datenanalyse für preisgünstige Überwachungssysteme. Entwicklung einer Methodik am Beispiel von Kreiselpumpen
Spath, D.; Hellmann, D.-H.; Kafka, C.; Kafka, T.
1998. wt Werkstattstechnik online, 88, 343–346
Preisgünstige Überwachungssysteme durch intelligente Datenanalyse
Spath, D.; Hellmann, D.-H.; Kafka, C.; Kafka, T.
1998. Technische Überwachung 1998 H. 7/8 S. 45-50
The process calendar: a controlling approach for strategic production development
Spath, D.; Barrho, T.; Riedmiller, S.
1998. Globalization of manufacturing in the digital communications era of the 21st century: innovation, agility, and the virtual enterprise; proceedings of the tenth international IFIP WG5.2/5.3 International Conference PROLAMAT 98, Trento, Italy, September 9-11 & 12, 1998. Ed.: G. Jacucci, Kluwer
Production-oriented product modelling - the integration of work planning into the distributed process of product development
Spath, D.; Agostini, A.
1998. In: Proceedings on the IFIP International Conference Prolamat, Trento, Italy 1998
Flexible planning logic for technology planning
Spath, D.; Agostini, A.
1998. Journal of Materials Processing Technology, 76 (1-3), 76–81
Entwicklung neuer Dienstleistungen/ Verbesserung von Dienstleistungen
Spath, D.; Matt, D.; Werner, B.
1998. Qualitätsmanagement für kleine und mittlere Dienstleistungsunternehmen, Leitfaden und prozeßorientierte Einstiegshilfe, Forschungsbericht, 77–86, Beuth Verlag GmbH
Market driven process and structure innovation
Matt, D.; Riedmiller, S.; Selinger, G.
1998. In: Proceedings of CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, ICME 1998, Capri, Italy 1998
Schlanke Informationsprozesse
Matt, D.
1998. Z. f. wirtschaftl. Fabrikbetr. 93 (1998) H. 5 S. 202
Marktorientierte Neuproduktentwicklung
Geisinger, D.; Matt, D.
1998. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 93 (5), 200–202
Dynamic feed axis with ball screw drive and driven nut
Frank, T.; Tilch, D.
1998. Production Engineering, 5 (2), 57–60
Kugelgewindetrieb im Vergleich
Frank, T.
1998. Antriebstechnik, (1), 33–38
Automatisierte Erstellung von Angeboten
Boehle, M.; Kafka, C.
1998. wt Werkstattstechnik online, 88 (3), 85–86
Die Ressourcen der Zukunft: Wo liegen die Schlüssel für eine wettbewerbsfähige Innovationskultur an unseren Hochschulen?
Weule, H.
1998. In: Der Aufbruch ist möglich: Standorte und Arbeitswelten zwischen Globalisierung und Regulierungsdickicht. Hrsg.: C. Smekal. Köln 1998. (Veröffentlichungen der Hanns-Martin-Schleyer-Stiftung. 52.)
Integrierte Methode zur Unterstützung der informellen Kommunikation im fertigungsnahen Umfeld
Spath, D.; Selinger, G.
1998. Rechnerintegrierte Konstruktion und Fertigung von Bauteilen: Kolloquium am 30. Juni 1998 / Sonderforschungsbereich 346, Universität Fridericiana Karlsruhe (Technische Hochschule). Hrsg.: H. Grabowski, 75–87, Universität Karlsruhe (TH)
Bewertung und Optimierung von Bearbeitungselementen aus fertigungstechnologischer Sicht
Spath, D.; Konold, T.
1998. In: Innovative Produktentwicklung und Produktionssystemplanung. Kolloquiumsband. Hrsg.: H. Grabowski. Karlsruhe : SFB 346, Univ. Karlsruhe 1998. S. 165-174
Methodische Gestaltsfindung durch Konstruktionsarbeits- und Planungsräumen
Spath, D.; Grabowski, H.; Agostini, A.
1998. In: New tools and workflows for product development. CIRP Seminar STC Design, Berlin 1998. Ed.: F.-L. Krause. Stuttgart 1998
Mikrozerspanung - ein wirtschaftliches Fertigungsverfahren zur Herstellung von Einzelstücken und Kleinserien
Schmidt, J.; Huentrup, V.
1998. In: Konferenzband zum Fraunhofer IPA Kongreß "Produktionstechnik für Mikrosysteme", Stuttgart 1998
Strategische Fertigungsmittelplanung und -strukturierung in einem dynamischen Umfeld
Barrho, T.; Brath, J.; Riedmiller, S.; Vossmann, D.
1998. In: Innovative Produktentwicklung und Produktionssystemplanung. Kolloquiumsband. Hrsg.: H. Grabowski. Karlsruhe : SFB 346, Univ. Karlsruhe 1998. S. 131-142
Adaptivitaet - Ein Ansatz zur benutzergerechten Gestaltung der Mensch-Maschine-Schnittstelle in der Produktion
Zimek, S.; Griesser, K.
1992. In: Kolloquiumsbericht des SFB 346 Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Karlsruhe 1992. S. 183-201
Wissensbasierte Planung der Fertigungsmittel und Informationsverarbeitung fuer flexible Fertigungsanlagen mit objektorientierten Methoden
Frey, V.
1992. In: Kolloquiumsbericht des SFB 346 Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Karlsruhe 1992. S. 93-111
Rechnerunterstuetztes Planungsmanagement fuer die integrierte Planung von Fertigungsanlagen in verteilten Systemen
Debus, F.; Heitz, M.-J.
1992. In: Kolloquiumsbericht des SFB 346 Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Karlsruhe 1992. S. 55-75
Untersuchungen zur Mikrostrukturierbarkeit von Stählen durch das Fertigungsverfahren Fräsen. PhD dissertation
Huentrup, V.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 96.) Fak. f. Maschinenbau, Diss. v. 8.12.1999., Universität Karlsruhe (TH)
Rechnerunterstuetzter Produktionsarbeitsplatz
Klaiber, M.; Burghardt, J.; Kuhn, R.; Sieth, T.
1992. In: Kolloquiumsbericht des SFB 346 Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. Karlsruhe 1992. S. 21-38
Montageplanung in CIM. Hrsg.: K. Feldmann
Bernhart, W.
1992. Berlin 1992. (CIM-Fachmann.)
Prozeßorientiertes Kostenmodell für die entwicklungsbegleitende Vorkalkulation. PhD dissertation
Eitrich, O.
1996. Karlsruhe 1996. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 67.) Fak. f. Maschinenbau, Diss. v. 8.7.1996., Universität Karlsruhe (TH)
Objektorientierte Produkt-/ Produktionsdatenbank PPM
Schmidt, J.; Steuernagel, R.
1991. VDI-Z. 133 (1991) Nr. 9 S. 120-128
Aufheiz- und Abkuehlverhalten von Wendeschneidplatten beim Stirnplanfraesen. Abstract
Schmidt, J.; Wassmer, R.; Ludwig, H.-R.
1992. Wt 82 (1992) H. 1 S. 48
Mit weiterentwickelter Robotertechnologie zu neuen Einsatzfeldern
Schauer, U.
1994. wt 84 (1994) H. 6 S. 310-311
Projektierung hydraulischer Anlagen
Iberle, F.
1994. wt 84 (1994) H. 6 S. 310-311
Entwicklungsbegleitende Vorkalkulation
Eitrich, O.
1994. wt 84 (1994) H. 6 S. 310-311
Flexible Automatisierung im Mauerwerksbau
Andres, J.
1994. wt 84 (1994) H. 6 S. 310-311
CAKETool - computer automated knowledge engineering tool
Weule, H.; Steuernagel, R.
1994. Prod. engng. 2 (1994) H. 1
Object-oriented programming of PLC based on IEC1131
Weule, H.; Spath, D.; Schelberg, H.-J.
1994. Prod. engng. 2 (1994) H. 1
Processing of optical sensor data for tool monitoring with neural networks
Weis, W.
1994. In: Proceedings of the Wescon’94 Conference, Los Angeles, USA 1994. Ed.: IEEE. S. 351-357
Optical tool monitoring with a neural network
Weis, W.
1994. In: ESRC research report. Ed.: Univ. of Calif., Lab. for Manuf. Autom. Berkeley, Calif. 1994. S. 103-105
Neuronales Netz zur optischen Werkzeugüberwachung
Weis, W.
1994. VDI-Z, Spezial 1994,2 Werkzeuge (=1994,Aug.) S. 50-55
Schnell und sicher zum ersten Werkstück
Walter, W.; Fechter, T.; Reibetanz, T.
1994. Masch., Anl., Verf. 1994 S. 46-47
Verteilte Daten für Entscheidungen nutzen
Steuernagel, R.
1994. Tech. Rdsch. 86 (1994) H. 12 S. 24-26
Entscheidungen in der AV unterstützen
Steuernagel, R.
1994. Arb.-Vorb. 31 (1994) S. 80-82
CAKETool - ein Werkzeug zur Entdeckung von Wissen in produktionstechnischen Daten
Steuernagel, R.
1994. In: Proceedings des Workshops "Maschinelles Lernen". 7. Jahrestagung für Künstliche Intelligenz. Hrsg.: D. Fensel. Karlsruhe 1994. (Forschungsbericht. AIFB, Universität Karlsruhe. 291.)
Der Weg zum schlanken "Öko"-Produkt
Spath, D.; Hartel, M.
1994. Logistik heute 16 (1994) H. 6 S. 26-28
Qualitätssicherung in der Auftragsabwicklung. Automatisierte Produktion von Nockenschaltern
Spath, D.; Eitrich, O.; Andres, J.
1994. Tech. Rdsch. 86 (1994) H. 36 S. 38-41
Neue Methoden verbessern die Technologieplanung
Sieth, T.
1994. VDI-Z, Spezial 1994,2 Werkzeuge (=1994,Aug.) S. 62-67
Leistungssteigerung durch PVD beschichtete HSS-Werkzeuge beim Räumen
Schmidt, J.; Raab, A.
1994. In: Spanende Fertigung. Hrsg.: K. Weinert. 1. Ausg. Essen 1994. S. 56-66
Urgeformte Mikrobauteile aus metallischen und keramischen Werkstoffen
Weule, H.; Peles, T.
2000. Werkstattstechnik 2000 H. 5
Flexible Produktionssteuerung in segmentierten Unternehmen
Weule, H.; Barrho, T.
2000. Werkstattstechnik 2000 H. 3
Kennzahlen in der Aufarbeitung gebrauchter Produkte
Wiendahl, H.-P.; Weule, H.; Schmaelzle, A.; Buerkner, S.
2000. wt Werkstattstechnik online, 90 (1/2), 27–30
Mixing head for abrasive-waterjet cutting based on an annular driving jet
Weule, H.; Suchy, U.
2000. Production Engineering, 7 (2), 95–98
Facility Management - Die Rücknahme von Montageanlagen lohnt sich
Weule, H.; Schmaelzle, A.; Buchholz, C.
2000. Ind.-Managem. 2000 H. 5
Ingenieur-Ausbildung international - Vision und Umsetzung des International Department der Universität Karlsruhe (TH)
Weule, H.; Hundeshagen, G. H.; Suchy, U.
2000. Wissenschaftsmanagement, 6 (2), 7–12
Re-use of assembly systems - a great ecological and economical potential for facility suppliers
Weule, H.; Buchholz, C.
2001. Proceedings / Environmentally conscious manufacturing, 6 - 8 November 2000, Boston, USA. Ed.: S. M. Gupta, Society of Photo-optical Instrumentation Engineers (SPIE)
Simulation of the high speed milling process
Weule, H.; Schmidt, J.; Soehner, J.
2000. Production Engineering, 7 (2), 23–26
Elektromagnetische Beeinflussung von Steuerungssystemen im industriellen Umfeld
Spath, D.; Goennheimer, C.; Landwehr, R.
2000. EMV-ESD, 11 (9)
Studie zur Methodenunterstützung im Target Costing
Spath, D.; Barrho, T.; Baumgartner, P.; Scharer, M.
2000. Controlling & Management, 44 (6), 351–356
Piezoelektrisch garantierte Genauigkeit
Spath, D.; Mussa, S.; Plutowsky, A.
2000. WB Werkstatt + Betrieb, (10), 19–21
Daten- und Informationsaustausch in kooperativen Wertschöpfungsprozessen
Spath, D.; Sternemann, K.-H.
2000. In: WGP-Workshop Virtuelle Produktionstechnik / E-Manufacturing, Produktionstechnisches Zentrum, Berlin 2000
Verbesserungspotentiale in der Produktion - Der Durchlaufleistungsgrad
Spath, D.; Dill, C.; Agostini, A.
2000. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 95 (4), 146–150
Bewertungsmethoden zur Unterstützung einer lebenszyklusgerechten Konstruktion
Spath, D.; Scharer, M.; Trender, L.
2000. Industrie Management, (1), 9–12
Hybride Montagesysteme mit absatzsynchroner Materialbereitstellung
Spath, D.; Baumeister, M.
2000. Industrie Management, 16 (2), 35–38
Timeframe controlled manufacturing in segmented companies supported by a process knowledge database
Spath, D.; Barrho, T.; Ebner, R.; Pamme, S.
2000. In: Proceedings on the 33rd CIRP International Seminar on Manufacturing Systems, Stockholm, Sweden 2000. S. 193-197
Beanspruchungsanalyse fuer Fraeswerkzeugschneiden mit in-Prozess- Temperaturmessung und FEM-Analyse
Wassmer, R.
1992. In: Sonderschau Produktionstechnik von Morgen, METAV ’92. Hrsg.: Verein Deutscher Werkzeugmaschinenfabriken. Frankfurt a.M. 1992. S. 74
Impulse für die Innovation von morgen: Der internetbasierte Methodenbaukasten
Spath, D.; Dill, C.; Scharer, M.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe.)
Objektorientierte Projektierung von Anpasssteuerungen
Schelberg, H.-J.
1992. In: Sonderschau Produktionstechnik von Morgen, METAV ’92. Hrsg.: Verein Deutscher Werkzeugmaschinenfabriken. Frankfurt a.M. 1992
Wiederverwendung von Montageanlagen - ein ökologisches Potential für Anlagenhersteller
Spath, D.; Buchholz, C.
2000. Recyclingorientierte Entwicklung technischer Produkte 2000: Management komplexer Zielkonflikte, Tagung Fellbach, 15. und 16. November 2000, 95–113, VDI Verlag
Wissensbasierte Technologieplanung fuer das Bearbeitungsverfahren Fraesen
Kuhn, R.
1992. In: Sonderschau Produktionstechnik von Morgen, METAV ’92. Hrsg.: Verein Deutscher Werkzeugmaschinenfabriken. Frankfurt a.M. 1992
Risk considering innovation planning in production systems
Spath, D.; Pamme, S.; Barrho, T.
2000. In: Proceedings on the 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering, ICME 2000, Capri, Italy 2000. S. 145-150
Unterstützung der Produktentstehung mit einem prozessbegleitenden Methodenbaukasten auf Intra/Internetbasis
Spath, D.; Dill, C.; Scharer, M.
2000. In: Erfolgreiche Produktentwicklung - Methoden und Werkzeuge zur Planung und Entwicklung von marktgerechten Produkten. Düsseldorf 2000. S. 45-67. (VDI-Berichte. 1558.)
Integrierte Topologie- und Gestaltoptimierung im Werkzeugmaschinenbau
Spath, D.; Neithardt, W.; Frank, T.; Allinger, P.
2000. wt Werkstattstechnik online, 90 (7/8), 319–323
Kein Bersten durch FEM
Schmidt, J.; Soehner, J.
2000. FORM + Werkzeug, (3), 26–28
Einstieg in die Trockenbearbeitung
Schmidt, J.; Dyck, M.
2000. WB Werkstatt + Betrieb, (4), 68–70
Qualitätsmanagement am Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe
Huentrup, V.
2000. In: Erfahrungsberichte zum Qualitätsmanagement im Hochschulbereich. Bonn 2000. S. 24-26. (Beiträge zur Hochschulpolitik. 2000,4.)
Neue Wege in der Aus- und Fortbildung: Das Forschungskonzept im Rahmen des Forschungsprojekts "Vom Markt zum Produkt"
Dill, C.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe.)
Aphasia classification and visualization of cerebral lesion profiles on the web
Axer, H.; Jantzen, J.; Sternemann, K.-H.; Kyserlingk, G. von
2000. In: World Automation Congress, WAC 2000, Maui, Hawaii 2000. IEEE Syst., Man and Cybern. Soc. IFMIP-9952
4.6.2 Trockenbearbeitung
Spath, D.; Hühsam, A.
2000. Umweltgerechte Produktentwicklung - Ein Leitfaden für Entwicklung und Konstruktion, Beuth Verlag GmbH
Kap. 4.6.3.1: Wiederverwendung von Montageanlagen
Spath, D.; Schmaelzle, A.; Buchholz, C.
2000. Umweltgerechte Produktentwicklung: ein Leitfaden für Entwicklung und Konstruktion, Bd. 1. Hrsg.: H. Birkhofer, Beuth Verlag GmbH
Konsequent dezentralisierte Steuerung mit Industrial Ethernet und offenen Applikationsprotokollen. Beitrag zur Einführung von Industrial Ethernet in die Industrieautomation. PhD dissertation
Landwehr, R.
2003. Karlsruhe 2003. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe (TH). 113.) Fak. f. Maschinenbau, Diss. v. 24.1.2003., Universität Karlsruhe (TH)
CAKETool - Computer automated knowledge engineering tool
Steuernagel, R.
1993. In: Applications of machine learning. ABB research. Ed.: H. Borchers. Zuerich 1993. (DEC RC/I2-TR-001.)
Optimierung des Fünfachsfräsens durch eine kennzahlenunterstützte CAM-Umgebung. PhD dissertation
Konold, T.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 92.) Fak. f. Maschinenbau, Diss. v. 8.7.1999., Universität Karlsruhe (TH)
Kooperative Benutzerschnittstellen fuer die Produktionstechnik
Loeffler, L.
1990. Industrieanz. 112 (1990) Juni
Rechnerunterstuetzte Planung der Qualitaetspruefung mit CAD
Boes, K.; Anderl, R.
1990. In: Anderl, Reiner; Castro, P.: CAD/CAM. Auf dem Weg zu einer branchenuebergreifenden Integration. Berlin 1990. S. 230-248
Integrierter Informationsfluss von der rechnerunterstuetzten Konstruktion zur numerisch gesteuerten Fertigung
Rohr, M.
1990. In: Anderl, Reiner; Castro, P.: CAD/CAM. Auf dem Weg zu einer branchenuebergreifenden Integration. Berlin 1990. S. 218-230
Bewertung von Montier- und Demontierbarkeit in der Entwurfsphase als Element eines Lifecycle-Design
Bernhart, W.
1992. In: Montage und Demontage. Duesseldorf 1992. S. 297-316. (VDI-Berichte. 999.)
Optimierung der Technologieplanung
Sieth, T.
1996. In: Fräsen. Fachl. Leitung: D. Spath. Karlsruhe : wbk 1996. S. 157-178
Konzept zur Verbesserung der Elektromagnetischen Verträglichkeit (EMV) in Produktionssystemen durch intelligente Sensor/Aktor-Anbindung. PhD dissertation
Goennheimer, C.
2003. Karlsruhe 2003. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 116.) Fak. f. Maschinenbau, Diss. v. 12.2.2003., Universität Karlsruhe (TH)
Zusammenhang zwischen Antriebsdynamik und Zerspanprozeß
Schaupp, J.
1996. In: Fräsen. Fachl. Leitung: D. Spath. Karlsruhe : wbk 1996. S. 85-103
Robot system for the automated disassembly of technical consumer goods
Binder, Z.; Horacek, P.; Chevron, D.; Schmidt, J.; Tritsch, C.
1995. In: Proceedings of the Annual Meeting of the International Institute for Automation and Robotics, Grenoble, France 1995
Qualitätsorientierte Feinbearbeitung mit Industrierobotern unter Einbeziehung von Fuzzy-Logik
Schmidt, J.; Schmaelzle, A.; Tritsch, C.
1995. In: Anwenderseminar Fuzzy Duisburg ’95, 9. IAR Kolloquium 1995, Duisburg 1995. Dt.-Franz. Inst. f. Autom. u. Robotik, Teilinst. Duisburg. S. 143-153
Entwicklungstendenzen beim Fräsen
Spath, D.; Walter, U.; Schaupp, J.
1996. In: Fräsen. Fachl. Leitung: D. Spath. Karlsruhe : wbk 1996. S. 7-29
Fräsen. Wettbewerbsvorteile durch den Einsatz innovativer Technologien. Tagungsband. Karlsruher Kolloquium, 6. März 1996
Spath, D.; Schmidt, J.; Walter, U.; Schaupp, J. (Eds.)
1996. Karlsruhe : wbk 1996
Integration der Qualitätsentwicklung in featurebasierte CAD/CAM Prozeßketten. PhD dissertation
Bös, K.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 58.) Fak. f. Maschinenbau, Diss. v. 7.7.1994., Universität Karlsruhe (TH)
Leistungsfähigere Kugelgewindetriebe durch Beschichtung. PhD dissertation
Haberkern, A.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 79.) Fak. f. Maschinenbau, Diss. v. 12.2.1998., Universität Karlsruhe (TH)
Hartfeinbearbeitung von Verzahnungen mit geometrisch unbestimmter Schneide beim Fertigungsverfahren Wälzstoßen
Plass, M.
1996. In: Wälzstoßen. Fachl. Leitung: D. Spath. Karlsruhe : wbk 1996. S. 55-75
Trockenbearbeitung beim Wälzstoßen
Doerfel, O.
1996. In: Wälzstoßen. Fachl. Leitung: D. Spath. Karlsruhe : wbk 1996. S. 33-54
Variation of geometry and size for optimized demoulding, seperation and handling of moulded micro parts within an automated PIM-process
Weule, H.; Stengel, G.; Buchholz, C.
2002. In: Proceedings of 3rd International Conference of euspen, Eindhoven 2002
Zuführtechnik für die Mikromontage
Weule, H.; Dittrich, S.; Blessing, A.; Krahtov, L.
2002. wt Werkstattstechnik online, 92 (9), 424–427
Planen, eine herausfordernde Aufgabe fuer den Ingenieur
Weule, H.
1990. Karlsruher Transfer 4 (1990) Nr. 6 S. 10-20
Neue Gewindegeometrie für den Kugelgewindetrieb
Weule, H.; Dambacher, U.
2002. Antriebstechnik, (6), 49–51
Characterization of activities to enable enterprise-spanning design and execution of business processes
Spath, D.; Sternemann, K.-H.; Armbruster, M.
2002. In: Proceedings. The 6th World Multiconference on Systemics, Cybernetics and Informatics, SCI 2002, Orlando, Fla. 2002
Business process automation with WebServices
Spath, D.; Rus, T.; Armbruster, M.
2002. In: Proceedings. The 6th World Multiconference on Systemics, Cybernetics and Informatics, SCI 2002, Orlando, Fla. 2002. Vol. 20. S. 204f
Integrated methods to support informal communication in manufacturing environments
Spath, D.; Rus, T.
2002. In: Proceedings on the 3rd International Colloquium on Production Science, Universität Karlsruhe 2002
WGP proposal for reform of the engineering studies in Germany
Spath, D.; Ruoff, E.
2002. In: CIRP International Manufacturing Education Conference, CIMEC 2002, Twente, The Netherlands 2002. ISBN 90-365-1734-6. S. 81-86
Die Fabrik in der Fabrik
Spath, D.; Nesges, D.; Demuss, L.
2002. IO New Management, (3), 44–50
Optimized design with topology and shape optimization
Spath, D.; Neithardt, W.; Bangert, C.
2002. Proceedings of the Institution of Mechanical Engineers B, 216 (8), 1187–1192
Verrichtungsweise Montage komplexer Produkte in hybriden Montagesystemen. Notwendigkeit der Bewertung hybrider Montageanlagen
Spath, D.; Lotter, B.; Baumeister, M.
2002. wt Werkstattstechnik online, 97 (9), 411–414
Web Services - The New Multi Agents
Spath, D.; Sternemann, K.-H.; Armbruster, M.; Lanza, G.; Herm, M.
2002. Proceedings. The 6th World Multiconference on Systemics, Cybernetics and Informatics, SCI 2002, Orlando, Fla. 2002. Ed.: N. Callaos, 209–214, International Institute of Informatics and Systemics (IIIS)
Rechnergestuetzte technische Problemloesung bei der Angebotserstellung von flexiblen Drehzellen. PhD dissertation
Beichter, S.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 39.) Fak. f. Maschinenbau, Diss. v. 10.12.1991., Universität Karlsruhe (TH)
Simulation for dynamical process chains
Spath, D.; Lanza, G.; Herm, M.
2002. Modelling and simulation 2002. Ed.: K. Amborski, In: 16th European Simulation Multi-Conference, ESM 2002, Darmstadt, Germany 2002., 11–13, SCS-Europe
Multi enterprise scheduling with evolutionary strategies
Spath, D.; Lanza, G.; Herm, M.
2002. Production engineering, 9 (1), 77–80
Webserver für Feldgeräte: Vom Prozess direkt ins Web
Spath, D.; Landwehr, R.; Goennheimer, C.
2002. SPS Magazin, 15 (HMI-Special), 51–52
Konzeption einer SPS-Einbindung in das Simulationstool eMWorkplace
Spath, D.; Landwehr, R.
2002. Leitprojekt integrierte, virtuelle Produktentstehung: Abschlussbericht. Hrsg.: F.-L. Krause, 148, Fraunhofer IRB Verlag
Auftragsabwicklung in dezentralen Strukturen: Erfolgsfaktoren und Probleme - Ergebnisse einer Studie
Spath, D.; Klinkel, S.; Barrho, T.
2002. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 97 (3), 130–132
Efficient allocation of knowledge in distributed business structures
Spath, D.; Elsner, J.; Sternemann, K.-H.
2002. Proceedings of the Institution of Mechanical Engineers. Part B, Journal of Engineering Manufacture, 216 (6), 939–943
Quality assurance for micro-mechanical components
Spath, D.; Elsner, J.
2002. Proceedings, 3rd international EUSPEN conference and 4th general meeting, Eindhoven, The Netherlands, May 26th - 30th, 2002, 403–407, Eindhoven
Wandlungsfähigkeit und Planung von Fabriken. Ein Ansatz durch Fabriktypologisierung und unterstützenden Strukturbaukasten
Spath, D.; Baumeister, M.
2002. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 97 (1/2), 28–32
Strategieplanung in der sozial orientierten Fabrik
Spath, D.; Barrho, T.; Nesges, D.
2002. wt Werkstattstechnik online, 92 (7/8), 393–397
Werkzeugmaschine 2010
Spath, D.; Armbruster, P.; Reinhart, G.; Zielasko, W.; Barrho, T.
2002. wt Werkstattstechnik online, 92 (7/8), 389–391
Werkerausbildung im Hochlauf neuer Produktionssysteme
Spath, D.; Dill, C.; Kuerschner, F.
2002. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 97 (11), 563–565
So gelingt das Räumen ohne Kühlschmierstoff
Schmidt, J.; Lang, H.
2002. WB Werkstatt + Betrieb, 135 (12), 44–46
Improvement of micro end milling tools through variation of tool manufacturing method and geometry
Schmidt, J.; Tritschler, H.; Bischoff, L.; Schulz, W.
2002. International journal of nonlinear sciences and numerical simulation, 3 (4), 595–598
Requirements of an industrially applicable microcutting process for steel micro-structures
Schmidt, J.; Spath, D.; Elsner, J.; Huentrup, V.; Tritschler, H.
2002. Microsystem Technologies, 8 (6), 402–408
Moderne Verfahren für verschleißarme Motoren
Schmidt, J.; Mehr, A.; Luther, R.
2002. WB Werkstatt + Betrieb, 135 (6), 128–132
Wagnis und Chancen der Technologie-Integration
Mehr, A.; Ellermeier, A.; Tschannerl, M.
2002. WB Werkstatt + Betrieb, 135 (11), 10–14
Erforschung eines innovativen Dosiersystems für hochdynamische Anwendungen. Abschlussbericht
Weule, H.
2002. Karlsruhe 2002. (Projektberichte des Instituts für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe.)
ACCOMAT - die genauigkeitsgeregelte Maschine. Abschlussbericht. BMBF Leitprojekt ACCOMAT (1998 - 2002)
Spath, D.; Plutowsky, A. (Eds.)
2002. Karlsruhe 2002. (Projektberichte des Instituts für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 2.)
Einsatz von Ethernet TCP/IP zur störfesten Vernetzung von Steuerungssystemen im Produktionsumfeld
Spath, D.; Goennheimer, C.; Landwehr, R.
2002. In: Elektromagnetische Verträglichkeit. EMV 2002. Hrsg.: A. Schwab. Berlin 2002. S. 827-836
Ist Flexibilität genug? Turbulenzen sind nur mit systemischem Denken zu bewältigen
Spath, D.; Dill, C.
2002. In: Erfolg in Netzwerken. Hrsg.: J. Milberg. Berlin 2002
Optimierung der Arbeits- und Technologieplanung durch Berücksichtigung von Interaktionen
Schmidt, J.; Ebner, R.; Agostini, A.
2002. In: Arbeits- und Ergebnisbericht. SFB 346: Rechnerintegrierte Konstruktion und Fertigung von Bauteilen. 2000-2002. Karlsruhe : RPK 2002
Dynamische Optimierung von Bauteilen und Maschinen
Neithardt, W.
2002. Leitprojekt integrierte, virtuelle Produktentstehung. Bd. 3: Abschlussbericht. Hrsg.: F.-L. Krause, 244–245, Fraunhofer IRB Verlag
Teilprojekt Drehmaschine
Mussa, S.; Kirchhoff, M.
2002. ACCOMAT - die genauigkeitsgeregelte Maschine: Abschlussbericht, BMBF Leitprojekt ACCOMAT (1998 - 2002). Hrsg.: D. Spath, wbk
Integrierte virtuelle Produktentstehung. iViP. Bd. 3: Abschlussbericht
Krause, F.-L.; Tang, T.; Ahle, U. (Eds.)
2002. Stuttgart 2002
Teilprojekt Versuchsträger Bohren/Fräsen
Hoffmann, T.; Pulawski, R.; Geisler, M.; Neithardt, W.; Plutowsky, A.; Dambacher, U.
2002. ACCOMAT: die genauigkeitsgeregelte Maschine: Abschlussbericht, BMBF Leitprojekt ACCOMAT (1998 - 2002). Hrsg.: D. Spath, wbk
Turbulenzreaktionsprozesse. Ein Ansatz zur Steigerung der Reaktionsfähigkeit auf Turbulenzen am Beispiel des Produktionshochlaufs. PhD dissertation
Dill, C.
2003. Karlsruhe 2003. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 114.) Fak. f. Maschinenbau, Diss. v. 24.1.2003., Universität Karlsruhe (TH)
Fraktionierung technischer Produkte mittels eines frei beweglichen Wasserstrahlwerkzeuges. PhD dissertation
Klimmek, M.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 71.) Fak. f. Maschinenbau, Diss. v. 8.7.1997., Universität Karlsruhe (TH)
Der Prozeßkalender - Eine Methodik zur marktorientierten Entwicklung von Prozessen. Beitrag zur Unterstützung des Managements bei der Schaffung von Perspektiven und Sicherung der Wirtschaftlichkeit für produzierende Unternehmen. PhD dissertation
Riedmiller, S.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 82.) Fak. f. Maschinenbau, Diss. v. 29.6.1998., Universität Karlsruhe (TH)
Rechnergestuetzte Auswahl von Schnellbefestigungselementen. Die Montage wird schneller
Schmidt, J.; Bernhart, W.
1991. Tech. Rdsch. 83 (1991) Nr. 2 S. 28-30
Rechnergestuetzte Produktentwicklung und Montageplanung
Bernhart, W.; Ganghoff, P.; Schelberg, H.-J.; Steuernagel, R.
1991. FBIE 1991 Nr. 2 S. 68 ff
Integration von Produktentwicklung und Montageplanung fuer die flexible Serienmontage
Bernhart, W.; Ganghoff, P.; Schelberg, H.-J.; Steuernagel, R.
1991. FBIE 1991 Nr. 2 S. 45 ff
Sieben Thesen zur Verfuegbarkeit flexibel automatisierter Drehzellen
Asteriadis, N.; Klaiber, M.; Wiedemann, I.
1991. AV 28 (1991) Nr. 6 S. 98
Simulation in CIM. Hrsg.: M. Weck
Klaiber, M.; Loeper, S.
1991. Koeln 1991. (CIM-Fachmann.)
Adaptable/adaptive user interface management systems in production
Zimek, S.
1991. In: Human Computer Interaction International Conference ’91, Stuttgart 1991. Amsterdam 1991
Integration von Aktionsplanung und Konfigurierung in der Planung flexibler Montagesysteme
Koehne, A.; Ganghoff, P.; Steuernagel, R.
1991. In: Beitraege zum 5. Workshop Planen und Konfigurieren, 1991. Hrsg.: A. Guenter. 1991
Beitrag zur Bewertung von Montagevarianten. Rechnergestuetzte Hilfsmittel zur kostenorientierten, parallelen Entwicklung von Produkt und Montagesystem. PhD dissertation
Bernhart, W.
1993. Karlsruhe 1993. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 49.) Fak. f. Maschinenbau, Diss. v. 29.4.1993., Universität Karlsruhe (TH)
Technologieplanungssystem Fraesen. Wissensbasierte Auswahl von Werkzeugen, Schneidkoerpern und Schnittbedingungen fuer das Fertigungsverfahren Fraesen. PhD dissertation
Kuhn, R.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 42.) Fak. f. Maschinenbau, Diss. v. 30.6.1992., Universität Karlsruhe (TH)
Inprocess-Geometriemessung beim Honen. PhD dissertation
Uebelhör, P.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 56.) Fak. f. Maschinenbau, Diss. v. 11.7.1994., Universität Karlsruhe (TH)
Determination of heat treatment states fit for microcutting of steels
Peichl, A.; Huentrup, V.; Schulze, V.; Spath, D.; Loehe, D.
2000. Proceedings / 3. International Conference and Poster Exhibition Micro Materials, MicroMat 2000, April 17 - 19, 2000, Berlin, Germany. Ed.: B. Michel, 976–979, Verl. ddp Goldenbogen
Microcutting of steels - interaction of material properties and process parameters
Loehe, D.; Peichl, A.; Schulze, V.; Spath, D.; Tritschler, H.
2000. Proceedings / MICRO.tec 2000, September 25 - 27, 2000, Expo 2000, Hannover, Germany, 7–11, VDE Verlag
Zerspankraftmessung und Randschichtcharakterisierung beim Hochgeschwindigkeits-Stirnplanfräsen
Biesinger, F.; Soehner, J.; Schulze, V.; Voehringer, O.; Weule, H.
2000. In: Kolloquium des DFG-Schwerpunktprogramms "Spanen metallischer Werkstoffe mit hohen Geschwindigkeiten", Bonn 1999. Hrsg.: H.K. Tönshoff. Hannover 2000. S. 129-151
Charakterisierung eines optischen Messsystems unter den Bedingungen des Arbeitsraums einer Werkzeugmaschine. PhD dissertation
Plutowsky, A.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 112.) Fak. f. Maschinenbau, Diss. v. 19.6.2002., Universität Karlsruhe (TH)
Rechnergestützte Prozeßregelung beim flexiblen Gesenkbiegen durch Rückführung von Qualitätsinformationen. PhD dissertation
Maier, F.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 51.) Fak. f. Maschinenbau, Diss. v. 14.1.1994., Universität Karlsruhe (TH)
Vergleichende Untersuchungen schneller elektromechanischer Vorschubachsen mit Kugelgewindetrieb. PhD dissertation
Frank, T.
2001. Karlsruhe 2001. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 105.) Fak. f. Maschinenbau, Diss. v. 7.12.2000., Universität Karlsruhe (TH)
Parallele Projektierung von Werkzeugmaschinenkomponenten. Aufbau eines Werkzeugs zur Koordinierung von Projektierungsabläufen
Grundel, C.; Iberle, F.; Schelberg, H.-J.; Schreiner, P.
1996. Werkstattstech. 86 (1996) S. 37-40
Beschleunigte Werkzeugmaschinenprojektierung. Verkürzung von Durchlaufzeiten mit Hilfe des Projektierungsmanagers
Grundel, C.; Iberle, F.; Schelberg, H.-J.; Schreiner, P.
1996. Werkstattstech. 86 (1996) S. 86-90
Ein Ansatz zur Bewertung von Entwicklungsergebnissen in virtuellen Szenarien. PhD dissertation
Weber, J.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 76.) Fak. f. Maschinenbau, Diss. v. 9.12.1997., Universität Karlsruhe (TH)
Three-dimensional programming and simulation of PLC-controlled manufacturing systems
Spath, D.; Landwehr, R.
2000. International Journal for Manufacturing Science and Production, 3 (2-4), 189–194
Prozeßorientierte Prüfplanung auf Basis von Bearbeitungsobjekten für die Kleinserienfertigung am Beispiel der Bohr- und Fräsbearbeitung. PhD dissertation
Fleissner, F.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 78.) Fak. f. Maschinenbau, Diss. v. 20.4.1998., Universität Karlsruhe (TH)
Verschleißentwicklung im tribologischen System Fräsen. PhD dissertation
Wassmer, R.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 54.) Fak. f. Maschinenbau, Diss. v. 31.5.1994., Universität Karlsruhe (TH)
Einfahren von NC-Programmen
Schmidt, J.; Klaiber, M.; Asteriadis, N.
1991. VDI-Z. 133 (1991) Nr. 4 S. 115-118
Integrierte Topologie- und Gestaltoptimierung im virtuellen Produktentstehungsprozess - Einbindung in die iViP Architektur und industrielle Anwendung
Sauter, A.; Fricke, H.; Guengoer, Z.; Himmler, G.; Hougardy, P.; Lauber, B.; Mueller, O.; Neithardt, W.; Schirrmacher, R.
2000. Berechnung und Simulation im Fahrzeugbau : Tagung Würzburg, 14. und 15. September 2000, 499–530, VDI Verlag
Pumpendirektregelung: ein energiesparendes Antriebskonzept mit hoher Regelguete
Wilke, O.
1991. Oelhydraul. u. Pneumat. 35 (1991) S. 571 ff
Stand und Tendenzen in der Fertigung von Freiformflaechen
Weule, H.; Schauer, U.
1991. Tech. Rdsch. 83 (1991) Nr. 26 S. 52 f
Forschung fuer den Mittelstand
Weule, H.; Munz, D.; Schmidt, J.; Klaiber, M.
1991. Ind. u. Handel 47 (1991) Nr. 8 S. 6
Die Feinbearbeitung wird automatisierbar
Schmidt, J.; Timmermann, S.; Schauer, U.
1991. Tech. Rdsch. 83 (1991) Nr. 22 S. 78 ff
Bearbeitung von Freiformflaechen
Schmidt, J.; Klein, H.; Boes, K.; Minges, R.; Schauer, U.; Timmermann, S.
1991. VDI-Z 133 (1991) Nr. 1 S. 47 ff
Nacharbeit - Gehaertete Bauteile raeumen mit Hilfe kristalliner Hartstoffe
Schmidt, J.; Kallabis, M.
1991. Maschinenmarkt, Wuerzburg 97 (1991) Nr. 36 S. 50 ff
Was leisten moderne Blechbearbeitungszentren?
Schmidt, J.; Fleischer, J.
1991. Werkstatt und Betrieb, 124 (11), 892–894
FMEA - Eine Chance auch fuer den Mittelstand
Schmidt, J.; Asteriadis, N.; Minges, R.
1991. Qualtitaet u. Zuverlaessigk. 36 (1991) Nr. 1 S. 27 ff
Spanflaechen mit IR-Fotographie beobachtet
Ludwig, H.-R.; Wassmer, R.
1991. Tech. Rdsch. 83 (1991) Nr. 48 S. 30 ff
Einfahren nach Plan
Klaiber, M.; Podlawsky, G.; Hummel, R.
1991. Tech. Rdsch. 83 (1991) Nr. 22 S. 84 ff
Digitale Lageregelung eines hydraulischen Roboterarmes durch Pumpendirektregelung
Ziegler, R.
1990. Kurzber. d. Wiss. Ges. f. Produktionstech. 1990, 55
PEREZ - Programm zur Errechnung von Ruest- und Einfahrzeiten
Klaiber, M.
1991. Fortschr. Betriebsfuehr. u. Ind. Engng. 40 (1991) S. 244 ff
Automatisierung der Feinbearbeitung in der Fertigung von Hohlformwerkzeugen
Weule, H.; Timmermann, S.
1990. Kurzber. d. Wiss. Ges. f. Produktionstech. 1990, 38
Kooperative Benutzerschnittstellen fuer die Produktionstechnik
Loeffler, L.
1990. Kurzber. d. Wiss. Ges. f. Produktionstech. 1990, 59
Strukturelle Veraenderungen im Metallhandel
Braun, W. J.; Waldhier, T.; Onken, S.; Honeck, M.; Schreiber, M.
1991. Blech, Rohre, Profile 38 (1991) S. 797-802
Durch Festwalzen induzierte Eigenspannung in einsatzgehaerteten Zahnraedern mit FEM bestimmen
Liebisch, A.
1990. Kurzber. d. Wiss. Ges. f. Produktionstech. 1990,49
Forschung fuer die Produktionstechnik von morgen
Bernhart, W.; Loeper, S.
1991. Werkstattstech. 81 (1991) S. 70 ff
Simulation des Betriebsverhaltens von Kugelgewindetriebe
Golz, H.-U.
1990. Kurzber. d. Wiss. Ges. f. Produktionstech. 1990, 38
Simultaneous Engineering in der Montage. Tl. 1.2
Bernhart, W.; Ganghoff, P.; Schelberg, H.-J.; Steuernagel, R.
1991. Produkt. 1991 Nr. 12 S. 12 ff.; Nr. 14 S. 21 ff
Integration von Experten- und Datenbanksystemen
Steuernagel, R.
1990. In: Beitraege zum 4. Workshop Planen und Konfigurieren. Veranst.: FAW. Ulm 1990. S. 223-240
Integration von Produktentwicklung und Montageplanung
Bernhart, W.; Ganghoff, P.; Schelberg, H.-J.; Steuernagel, R.
1991. Tech. Rdsch. 83 (1991) Nr. 20 S. 132 ff
SPS steuert den Materialfluss
Lenschow, R.; Frey, V.
1990. SPS-Mag. 3 (1990) Aug. S. 20-22
Integration eines Planungssystems mit einem Datenbanksystem
Steuernagel, R.
1990. In: Tagungsband Tool 90, Birmingham 1990. S. 190-199
Methoden zur Projektierung und Analyse von Steuerungsprogrammen fuer ablauforientierte Systeme
Lenschow, R.
1990. In: Kongressband SPS/PC-’90 (Speicherprogrammierbare Steuerung), Sindelfingen 1990. S. 162-172
Ein Verfahren zur zielorientierten Reaktion auf Planabweichungen in der Werkstattregelung. PhD dissertation
Weinbrecht, J.
1993. Karlsruhe 1993. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 53.) Fak. f. Maschinenbau, Diss. v. 15.7.1993., Universität Karlsruhe (TH)
Flexible Automatisierung im Mauerwerksbau
Spath, D.; Andres, J.; Bock, T.; Steffani, H. F.
1994. In: Autonome mobile Systeme 1994. Hrsg.: P. Levi. Berlin 1994. S. 306-315. (Informatik aktuell.)
Multimedia-Unterstützung in der Demontage
Spath, D.; Tritsch, C.; Hartel, M.
1994. VDI-Z 136 (1994) H. 6 S. 38-41
Mikrosystemtechnik - wann kommt der Marktdurchbruch? Miniaturisierungsstrategien im Technologiewettbewerb zwischen USA, Japan und Deutschland
Bierhals, R.; Cuhls, K.; Huentrup, V.; Schuenemann, M.; Thies, U.; Weule, H.
2000. Physica-Verl
Structuring and configuration of CIM systems for branch-specific medium-sized enterprises
Nager, G.; Kapp, K.-H.; Schreiber, M.; Weber, U.
1995. J. of intell. manuf. 6 (1995) S. 191-201
Fertigungsorganisatorische Reaktionsmöglichkeiten bei dynamischem Umfeld
Spath, D.; Guenther, T.; Riedmiller, S.
1995. In: Innovative Produktentwicklung und Produktionssystemplanung. Hrsg.: H. Grabowski. Karlsruhe 1995. S. 317-330. (Veröffentlichungen des Sonderforschungsbereichs 346. 1.)
Erfassung, Aufbereitung und Interpretation von Erfahrungswissen aus dem Fertigungsprozeß. Konzepte zur Verwendung rückgeführter Daten
Schmidt, J.; Sieth, T.
1995. In: Innovative Produktentwicklung und Produktionssystemplanung. Hrsg.: H. Grabowski. Karlsruhe 1995. S. 273-284. (Veröffentlichungen des Sonderforschungsbereichs 346. 1.)
Erfassung, Aufbereitung und Interpretation von Erfahrungswissen aus dem Fertigungsprozeß. Ein Konzept zur Erfahrungsdatenrückführung
Schmidt, J.; Walter, W.
1995. Innovative Produktentwicklung und Produktionssystemplanung: Proceedings zur Workshopreihe am 7./8.3.95 an der Universität Karlsruhe. Hrsg.: H. Grabowski, 255–272, Universität Karlsruhe (TH)
Flexibles, lernfähiges Technologieplanungssystem TECHPERT für den fertigungsnahen Bereich
Schmidt, J.; Burghardt, J.
1995. In: Innovative Produktentwicklung und Produktionssystemplanung. Hrsg.: H. Grabowski. Karlsruhe 1995. S. 239-254. (Veröffentlichungen des Sonderforschungsbereichs 346. 1.)
Planung und Steuerung des Informationsflusses im fertigungsnahen Umfeld
Spath, D.; Posur, M.
1995. Innovative Produktentwicklung und Produktionssystemplanung: Proceedings zur Workshopreihe am 7./8.3.95 an der Universität Karlsruhe. Hrsg.: H. Grabowski, 223–238, Universität Karlsruhe (TH)
Szenario: "Innovative Produktentwicklung". Vom Kundenwunsch zum fertigen Produkt
Spath, D.
1995. In: Innovative Produktentwicklung und Produktionssystemplanung. Hrsg.: H. Grabowski. Karlsruhe 1995. S. 5-23. (Veröffentlichungen des Sonderforschungsbereichs 346. 1.)
Verformungs- und Kraefteanalyse beim Honvorgang mit Hilfe der FEM
Zurrin, R.
1989. In: Forschungsbericht "Honen in Forschung und industrieller Anwendung". Braunschweig: IWF der TU 1989. S. 56-67
Automatisierung in der Endmontage der Automobilindustrie
Weule, H.
1989. Automobilindustrie 34 (1989) S. 431
Gute Vorarbeit zahlt sich aus
Weinbrecht, J.
1989. Produktion 1989 Nr. 42 S. 17
Entwicklungsintegrierte Kalkulation von Produktlebenszykluskosten auf Basis der ressourcenorientierten Prozeßkostenrechnung. PhD dissertation
Trender, L.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 98.) Fak. f. Maschinenbau, Diss. v. 11.2.2000., Universität Karlsruhe (TH)
Reihenfolgeplanung unter Berücksichtigung von Interaktionen. Beitrag zur ganzheitlichen Strukturierung und Verarbeitung von Interaktionen von Bearbeitungsobjekten. PhD dissertation
Agostini, A.
2001. Karlsruhe 2001. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 106.) Fak. f. Maschinenbau, Diss. v. 26.6.2000., Universität Karlsruhe (TH)
Entwicklung von Softwarewerkzeugen zur wissensbasierten Inbetriebnahme von komplexen Serienmaschinen. PhD dissertation
Steuer, M.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 38.) Fak. f. Maschinenbau, Diss. v. 2.12.1991., Universität Karlsruhe (TH)
Datenmodellgestuetzte Wissensverarbeitung zur Diagnose- und Informationsunterstuetzung in technischen Systemen. PhD dissertation
Bartl, R.
1990. Karlsruhe 1990. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. Bd. 30.) Fak. f. Maschinenbau, Diss. v. 12.2.1990, Universität Karlsruhe (TH)
Ein Reifemodell für die Bewertung und Entwicklung von Dienstleistungsorganisationen. Das Service Management Maturity Model (SMMM(R)). PhD dissertation
Demuss, L.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 117.) Fak. f. Maschinenbau, Diss. v. 24.1.2003., Universität Karlsruhe (TH)
Fabrikplanung im turbulenten Umfeld. Methodik zur Zielplanung einer Fabrik unter Berücksichtigung eines turbulenten Unternehmensumfeldes und der übergeordneten Unternehmensziele. PhD dissertation
Baumeister, M.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 115.) Fak. f. Maschinenbau, Diss. v. 24.1.2003., Universität Karlsruhe (TH)
Modellbildung und experimentelle Untersuchung des Wälzschälprozesses. PhD dissertation
Huehsam, A.
2002. Karlsruhe 2002. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 111.) Fak. f. Maschinenbau, Diss. v. 2.5.2002., Universität Karlsruhe (TH)
Nahtstellen in der Fabrik
Anderl, R.; Arnold, D.; Englisch, J.; Frey, V.; Griessen, K.; Grobel, T.; Mueller, E.; Naudascher, U.; Steuernagel, R.; Waldhier, T.; Zuelch, G.; et al.
1992. (H. Weule, Ed.), Berlin 1992. (CIM-Fachmann.)
Objektorientierte Prozeß- und Strukturinnovation (OPUS). Methode und Leitfaden zur Steigerung der Produktivität indirekter Leistungsprozesse. PhD dissertation
Matt, D.
1998. Karlsruhe 1998. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 80.) Fak. f. Maschinenbau, Diss. v. 30.4.1998., Universität Karlsruhe (TH)
Kennzahlenbasiertes Bewertungssystem zur Beurteilung der Demontage- und Recyclingeignung von Produkten. Beitrag zur wirtschaftlichen Gestaltung des Lebenszyklus in der Produktentwicklung. PhD dissertation
Hartel, M.
1997. Karlsruhe 1997. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 72.) Fak. f. Maschinenbau, Diss. v. 4.6.1997., Universität Karlsruhe (TH)
Gezielte Optimierung von Werkzeugmaschinenkomponenten hinsichtlich der Prozessergebnisse
Rosum, J.
1992. In: Fraesen. Hrsg.: J. Schmidt. Karlsruhe 1992. S. 211-230
Entwicklung hybrider Produkte - Gestaltung materieller und immaterieller Leistungsbündel
Spath, D.; Demuss, L.
2003. In: Service Engineering - Entwicklung und Gestaltung innovativer Dienstleistungen. Hrsg.: H.-J. Bullinger. Berlin 2003
Automatisierte Technologieplanung am Beispiel der Komplettbearbeitung auf Dreh-/Fraeszellen. PhD dissertation
Rohr, M.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 37.) Fak. f. Maschinenbau, Diss. v. 3.12.1991., Universität Karlsruhe (TH)
Rueckfuehrung von Fertigungsdaten zur Unterstuetzung einer fertigungsgerechten Konstruktion. PhD dissertation
Honeck, H.-M.
1991. Karlsruhe 1991. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 36.) Fak. f. Maschinenbau, Diss. v. 19.11.1991., Universität Karlsruhe (TH)
Technology Planning of the NC Process Chain using Artificial Intelligence
Spath, D.; Armbruster, M.; Rus, T.
2001. Proceedings of the 2nd International Conference on Advances in Production Engineering (APE), Warsaw, Poland, June 7 - 9, 2001. Ed.: L. Dabrowski, 5–12, Oficyna Wydawnicza PW
Prozesskette der Fertigung mikromechanischer Bauteile
Weule, H.; Spath, D.; Schmidt, J.; Elsner, J.; Buchholz, C.
2001. wt Werkstattstechnik online, 91 (12), 726–732
Three degree-of-freedom measurement system for machine tools
Weule, H.; Plutowsky, A.; Hoeller, F.; Spieweck, M.; Werner, J.
2001. Production Engineering, 8 (2), 95–98
Bewertung von Entwicklungsleistung in der Automobilindustrie
Weule, H.; Kleinschmidt, J.; Scharer, M.; Zackor, U.
2001. Automotive Engineering Partners, 4 (6), 6–9
Neue Gewindegeometrie für den Kugelgewindetrieb - Einfluss hoher Lastwinkel auf die Belastung von Kugelgewindetrieben
Weule, H.; Dambacher, U.; Mussa, S.
2001. wt Werkstattstechnik online, 91 (8), 519–522
Micro-cutting of steel to meet requirements in miniaturization
Weule, H.; Huentrup, V.; Tritschler, H.
2001. Annals of the CIRP 50 (2001) H. 1
Context sensitive provision of enterprise information
Spath, D.; Sternemann, K.-H.; Selinger, G.; Ruoff, E.
2001. Production Engineering, 8 (1), 143–146
Unternehmensübergreifende Simulation von Geschäftsprozessen
Spath, D.; Sternemann, K.-H.; Lanza, G.
2001. Industrie-Management, 17 (5), 41–44
Kopplung von Systemen auf Basis von XML und BizTalk
Spath, D.; Sternemann, K.-H.; Herm, M.
2001. In: Tagungsband. IT & Automation, Nürnberg 2001. Berlin 2001
Kontextsensitive Bereitstellung und Visualisierung von Unternehmensinformationen
Spath, D.; Sternemann, K.-H.; Herm, M.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (7-8), 378–382
Betreibermodelle von morgen fordern heute neue Steuerungskonzepte
Spath, D.; Sternemann, K.-H.
2001. In: Begleitband zum Fachgespräch "Zerspanen im modernen Produktionsprozess", Univ. Dortmund 2001
Mikrofertigung, Genauigkeitssteigerung und Trockenbearbeitung
Spath, D.; Schmidt, J.; Dyck, M.; Mussa, S.; Plutowsky, A.; Simon, M.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (11/12), 602–605
Neuartiges Lasermesssystem für den Einsatz in der Werkzeugmaschine
Spath, D.; Plutowsky, A.
2001. VDI-Z Integrierte Produktion, 143 (6), 34–37
Leitprojekt ACCOMAT - eine Bilanz
Spath, D.; Mussa, S.; Plutowsky, A.
2001. VDI-Z Integrierte Produktion, 143 (6), 6–9
Piezo-Stelleinrichtung zur aktiven Kompensation von Bearbeitungsfehlern
Spath, D.; Mussa, S.
2001. VDI-Z Integrierte Produktion, 143 (7/8), 47–49
ACCOMAT (Accuracy Controlled Machine Tool) - Die Genauigkeitsgeregelte Maschine
Spath, D.; Mussa, S.; Plutowsky, A.; Konold, T.
2001. VDI-Z Integrierte Produktion, 143 (6), 6–9
Hochflexible, modulare und integrierte Handhabungs- und Bearbeitungskinematiken
Spath, D.; Munzinger, C.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (9), 500–503
Tore öffnen: Quality-Gate-Konzept für den Produktentstehungsprozess
Spath, D.; Schneider, W.; Scharer, M.; Landwehr, R.
2001. Qualität und Zuverlässigkeit, 46 (12), 1544–1549
Große Anforderungen an kleine Teile
Spath, D.; Elsner, J.
2001. Qualität und Zuverlässigkeit, 46, 1408–1409
Der Kommunikationszirkel Vom Markt zum Produkt - Unterstützung der Produktentwicklung durch einen internetbasierten Methodenbaukasten mit Grob- und Feinfilter
Spath, D.; Dill, C.; Scharer, M.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (3), 105–109
Integrierte Produkt- und Dienstleistungsentwicklung für den Maschinen- und Anlagenbau - Neue Anforderungen an den Produktentstehungsprozess durch die systematische Entwicklung von Betreibermodellen
Spath, D.; Demuss, L.
2001. Instandhaltung - Ressourcenmanagement: Tagung Bamberg, 15. und 16. Mai 2001 / 22. VDI/VDEh-Forum Instandhaltung 2001, 395–410, VDI Verlag
Betreibermodelle für den Maschinen und Anlagenbau - Chancen und Risiken einer komplexen Kunden-Lieferanten-Beziehung
Spath, D.; Demuss, L.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (1-2), 35–39
Ist Flexibilität genug? Zum Management von Turbulenzen sind neue Fähigkeiten gefragt
Spath, D.; Baumeister, M.; Dill, C.
2001. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 96 (5), 235–241
Ein internetbasierter Methodenbaukasten mittels XML für ein Service Engineering
Spath, D.; Baumeister, M.; Demuss, L.
2001. Industrie Management, 17 (2), 31–35
Synchronisation of material flow and assembly in hybrid and modular systems
Spath, D.; Baumeister, M.
2001. Assembly Automation, 21 (2), 152–157
PPS in segmentierten Strukturen: Überflüssig oder unerlässlich?
Spath, D.; Barrho, T.; Klinkel, S.
2001. PPS Management, 6 (3), 10–13
Dank dezentraler Struktur die Lieferzeit halbiert
Spath, D.
2001. Produktion: Technik und Wirtschaft für die deutsche Industrie, (46), 26
µ-Fräsen und µ-Erodieren für den Formenbau
Schmidt, J.; Simon, M.; Tritschler, H.; Ebner, R.
2001. wt Werkstattstechnik online, 91 (12), 743–746
Hartfeinwälzstoßen. Kurzbericht zum Forschungsvorhaben FVA 349
Schmidt, J.; Mehr, A.
2001. Antriebstechnik 40 (2001) H. 11
Trockenbearbeitung ist wirtschaftlich und umweltfreundlich
Schmidt, J.; Lang, H.; Dyck, M.
2001. Maschinenmarkt, (29), 20–23
Metallbearbeitung ohne Kühlschmierung
Schmidt, J.; Konold, T.; Dyck, M.
2001. WB Werkstatt + Betrieb, 134 (9), 38–49
Wälzschälen - Ein Verfahren findet neue Anwendungsgebiete
Schmidt, J.; Huehsam, A.
2001. wt Werkstattstechnik online, 91 (8), 514–518
Integrierte Topologie- und Gestaltoptimierung in der virtuellen Produktentwicklung - Konzeption und industrielle Anwendung
Sauter, J.; Lauber, B.; Meske, R.; Fricke, H.; Himmler, G.; Hougardy, P.; Neithardt, W.
2001. Konstruktion, 53 (3), 56–60
Boxenstopp im Zwergenland
Blessing, A.; Plutowsky, A.; Tritschler, H.
2001. Spektrum der Wissenschaft, (12), 78–80
Potentials in the optimization of machine tools
Weule, H.; Neithardt, W.; Allinger, P.
2001. Production Engineering, 8 (2), 75–78
Method for assessment of reuse suitability within modular assembly systems
Weule, H.; Buchholz, C.
2001. Assembly Automation, 21 (3), 241–246
Automated manufacturing system for powder injection molding
Weule, H.; Blessing, A.; Peles, T.
2001. Production Engineering, 8 (1)
Simulation of the high speed milling process
Weule, H.; Schmidt, J.; Soehner, J.
2001. Scientific fundamentals of HSC. Ed.: H. Schulz, Carl Hanser Verlag
Umstellung eines Fertigungsbereichs auf Trockenbearbeitung
Toussaint, D.; Huehsam, A.
2001. Fellbach : ABAG-itm GmbH 2001. (ABAG Projektbericht.)
Compensation of machine tool errors with a piezo device
Spath, D.; Mussa, S.
2001. Production Engineering, 8 (2), 103–106
SPS-Programmierung mit Virtual Reality
Spath, D.; Landwehr, R.
2001. Leitprojekt integrierte, virtuelle Produktentstehung: Fortschrittsbericht April 2001. Hrsg.: F.-L. Krause, Fraunhofer IRB Verlag
Konzeption einer integrierten Werkzeugmaschinen-Simulationsumgebung
Spath, D.; Landwehr, R.
2001. Leitprojekt integrierte, virtuelle Produktentstehung: Fortschrittsbericht April 2001. Hrsg.: F.-L. Krause, Fraunhofer IRB Verlag
Vom Markt zum Markt - Produktentstehung als zyklischer Prozess
Dill, C.; Scharer, M.
2001. (D. Spath, Ed.), LOG_X-Verl
Der Referenzprozess "Vom Markt zum Produkt" für verschiedene Unternehmenstypen
Spath, D.; Dill, C.; Scharer, M.
2001. Vom Markt zum Produkt: Impulse für die Innovationen von morgen. Hrsg.: D. Spath, 51–61, LOG_X-Verl
Mit dem Methodenbaukasten Produkte treffsicher und schnell entwickeln
Spath, D.; Dill, C.; Scharer, M.
2001. Vom Markt zum Produkt: Impulse für die Innovationen von morgen. Hrsg.: D. Spath, 7–23, LOG_X-Verl
Prozesstechnologie zur kühlschmiermittelfreien und minimierten Metallbearbeitung
Schmidt, J.
2001. In: Tagungsband zum Tag der Trockenbearbeitung, wbk, Univ. Karlsruhe 2001
Optimierung einer Mikrofräsmaschine
Neithardt, W.
2001. Leitprojekt integrierte, virtuelle Produktentstehung: Fortschrittsbericht April 2001. Hrsg.: F.-L. Krause, 104–106, Fraunhofer IRB Verlag
ReAsCo - ReUse of Assembly Components
Mueller, E.; Buchholz, C.
2001. Umweltgerechte Produktentwicklung: ein Leitfaden für Entwicklung und Konstruktion, Bd. 1. Hrsg.: H. Birkhofer, Beuth Verlag GmbH
Syllogist, ein System zur wissensbasierten Planung und Konfigurierung
Ochs, M.
1990. In: Workshop "Planen und Konfigurieren" am 3.12.1987. Karlsruhe 1987. S. 59-82
Workshop "Planen und Konfigurieren" am 3.12.1987
Workshop "Planen und Konfigurieren" am 3.12.1987
1990. Karlsruhe: Inst. f. Werkzeugmaschinen u. Betriebstechnik 1987
Theoretische und experimentelle Untersuchung eines bistabilen elektrohydraulischen Linearantriebs. PhD dissertation
Lembke, K.
2000. Karlsruhe 2000. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 102.) Fak. f. Maschinenbau, Diss. v. 4.12.2000., Universität Karlsruhe (TH)
Lean-Production - eine neue Produktionsphilosophie?
Bernhart, W.
1992. In: Intertech 92, St. Gallen 1992
Produktionstechnik von morgen
Bernhart, W.; Loeper, S.
1992. Wt 82 (1992) H. 6 S. 26-27
Einflussgroessen auf die Zerspanung und die resultierende Beanspruchung im Fraesprozess
Wassmer, R.
1992. In: Fraesen. Hrsg.: J. Schmidt. Karlsruhe 1992. S. 35-66
Schneidenverschleiss beim Fraesen prozessbegleitend messen mit Hilfe bildverarbeitender Systeme
Schmidt, J.; Weis, W.
1992. Masch.-Markt 98 (1992) H. 41 S. 40-44
Heisse Schneide
Schmidt, J.; Wassmer, R.; Ludwig, H.-R.
1992. Masch.-Markt 98 (1992) H. 18 S. 46-53
Entwicklung der Technologieforschung an den Hochschulen beim Fraesen
Schmidt, J.; Wassmer, R.
1992. In: Fraesen. Hrsg.: J. Schmidt. Karlsruhe 1992. S. 7-34
Aktuelle Forschungsaktivitaeten und Tendenzen beim Zerspanverfahren Raeumen
Schmidt, J.; Raab, A.; Gapp, R.
1992. In: Raeumen. Hrsg.: J. Schmidt. Karlsruhe 1992. S. 7-47
Feinbearbeitung. Made by Robot
Schauer, U.
1992. Werkzeug u. Formenbau 1992 H. 3 S. 44-49
Expertensystem zur Projektierung hydraulischer Anlagen
Richter, M.; Iberle, F.
1992. Oelhydraul. + Pneum. 36 (1992) S. 76ff
Abkanten ohne Ausschuss
Maier, F.
1992. Ind.-Anz. 114 (1992) H. 30 S. 44f
Planung flexibler Montagesysteme durch Integration der Ablauf- und Aufbaustrukturplanung
Koehne, A.; Ganghoff, P.
1992. In: Tagungsband. 6. Workshop Planen und Konfigurieren. Bayerisches Forschungszentrum fuer Wissenschaftliche Systeme. 1992. S. 158-161
Hartraeumen mit kristallin beschichteten Werkzeugen
Kallabis, M.
1992. In: Raeumen. Hrsg.: J. Schmidt. Karlsruhe 1992. S. 167-193
Werkzeugsteuerung und die Schnittstellen
Herrmann, G.; Klaiber, M.; Lenschow, R.
1992. Arb.-Vorbereit. 29 (1992) H. 1 S. 11-14
Einfluss der Kugelrueckfuehrung auf das Leerlaufdrehmoment von Kugelgewindetrieben
Golz, H.-U.; Rosum, J.
1992. Konstr. 44 (1992) S. 23-28
Wirtschaftliche Montage spielarmer Passungen - Vibration macht’s moeglich
Bernhart, W.; Steck, W.
1992. Tech. Rdsch. 84 (1992) H. 16 S. 48-51
Taktzeitanalyse und -prognose in der flexiblen automatisierten Serienmontage
Bernhart, W.; Fimpel, W.
1992. Arb.-Vorbereit. 29 (1992) H. 10
Ansatz eines rechnerunterstützten Planungsmanagements für die Planung in verteilten Strukturen. PhD dissertation
Debus, F.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 52.) Fak. f. Maschinenbau, Diss. v. 5.5.1994., Universität Karlsruhe (TH)
CIM fuer den Mittelstand. Messebericht Cebit’89
Steuer, M.; Ganghoff, P.
1989. Industrieanz. 1989 Nr. 35 S. 14-16
EMO-Messebericht. Tl. 7. Sondermaschinen
Kallabis, M.
1989. Werkstattstech. 79 (1989) S. 694-696
Wissensbasierte Planung und Konfigurierung
Ochs, M.
1989. O.O. 1989. (Kurzberichte der Wissenschaftlichen Gesellschaft fuer Produktionstechnik der Technischen Hochschulen und Universitaeten der Bundesrepublik Deutschland. 1989,14.)
Ermittlung der Spanflaechentemperatur beim Stirnplanfraesen mit Infrarotphotographie
Ludwig, H.-R.
1989. O.O. 1989. (Kurzberichte der Wissenschaftlichen Gesellschaft fuer Produktionstechnik der Technischen Hochschulen und Universitaeten der Bundesrepublik Deutschland. 1989,16.)
Automatisiertes Fuegen flexibler, ringfoermiger Teile am Beispiel von Dichtungen
Enderle, W.
1989. O.O. 1989. (Kurzberichte der Wissenschaftlichen Gesellschaft fuer Produktionstechnik der Technischen Hochschulen und Universitaeten der Bundesrepublik Deutschland. 1989,6.)
Automatisierung in der Feinbearbeitung von Hohlformwerkzeugen
Weule, H.; Timmermann, S.
1989. Werkstattstech. 79 (1989) S. 592-596
Expertensysteme: Stand der Technik und Einsatzmoeglichkeiten in der Hydraulik
Weule, H.; Noe, T.
1989. Oehlhydraulik u. Pneumatik 33 (1989) S. 493
Verfahren und Entwicklungen des Raeumens
Weule, H.; Kallabis, M.
1989. Werkstatt u. Betrieb 122 (1989) S. 687
Notwendige Entwicklungen bei Raeummaschinen
Weule, H.; Kallabis, M.
1989. Werkstatt u. Betrieb 122 (1989) S. 893-896
Ein hierarchischer Loesungsansatz zur Auftragsreihenfolgeplanung bei mehrstufiger Fertigung
Weule, H.; Schmitt, E.
1989. Werkstattstech. 79 (1989) S. 333-386
Computer-aided product analysis in assembly-planning
Weule, H.; Friedmann, T.
1989. CIRP annals 38 (1989) S. 1-46.5
Effektive Nutzung von Biegebearbeitungszentren. Rechnerhilfsmittel zum Reduzieren von Testzeiten bei Neuteilen
Weule, H.; Fleischer, J.; Maier, F.
1989. wt Werkstattstechnik online, 79, 581–586
Sicherung der Verfuegbarkeit hydraulischer Anlagen in Planung und Betrieb
Weule, H.
1989. Oelhydraulik u. Pneumatik 33 (1989) S. 15-28
Planen als Herausforderung
Weule, H.
1989. Tech. Rdsch. 1989 Nr. 26 S. 14-21
Wirtschaftliches Fraesen von Grauguss mit Siliziumnitrid
Ludwig, H.-R.
1989. Maschinenmarkt, Wuerzburg 95 (1989) Nr. 31 S. 30-36
Ermittlung der Spanflaechentemperatur beim Stirnplanfraesen
Ludwig, H.-R.
1989. Industrieanz. 1989 Nr. 15 S. 36-37
Tagungsbericht vom 3. Karlsruher Kolloquium "Raeumen"
Kallabis, M.
1989. Werkstattstech. 79 (1989) S. 378-379
Simultanes Engineering in der Montageplanung
Friedmann, T.
1989. Tech. Rdsch. 81 (1989) Nr. 32 S. 48-53
Syllogist - Eine Expertensystemshell zur Planung und Konfigurierung technischer Systeme
Ochs, M.; Ganghoff, P.; Weule, H.
1989. In: Informatik fuer die industrielle Automation. Duesseldorf 1989. S. 135-143. (VDI-Berichte. 723.)
Das CIM-Technologiezentrum Karlsruhe
Frey, V.
1989. In: CIM im Mittelstand. Hrsg.: A.-W. Scheer. Berlin 1989. S. 227-236
Sim Ex - Ein Werkzeug zur Strukturplanung von Fertigungssystemen
Buchberger, D.; Feller, A.; Weule, H.
1989. In: Informatik fuer die industrielle Automation. Duesseldorf 1989. S. 105-112. (VDI-Berichte. 723.)
Reduzierung des Entwicklungsaufwandes für anwendungsspezifische Zellenrechnersoftware durch Rechnerunterstützung. PhD dissertation
Herrmann, G.
1994. Karlsruhe 1994. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 55.) Fak. f. Maschinenbau, Diss. v. 10.6.1994., Universität Karlsruhe (TH)
Bearbeitung von Freiformflaechen
Schmidt, J.; Klein, H.; Boes, K.; Minges, R.; Schauer, U.; Timmermann, S.
1991. VDI-Z. 133 (1991) S. 47-57
Produktivitaetssteigerung durch rechnerunterstuetztes Einfahren von NC- Programmen. PhD dissertation
Klaiber, M.
1992. Karlsruhe 1992. (Forschungsberichte aus dem Institut fuer Werkzeugmaschinen und Betriebstechnik der Universitaet Karlsruhe. 47.) Fak. f. Maschinenbau, Diss. v. 7.12.1992., Universität Karlsruhe (TH)
Werkstueckflexibilitaet kommt vor Produktivitaet
Kallabis, M.
1990. Tech. Rdsch. 82 (1990) Nr. 37 S. 94-97
Messung der Zerspantemperaturen beim Raeumen mit kristallinen Hartstoffen
Schmidt, J.; Kallabis, M.
1990. Werkstattstech. 80 (1990) S. 611-614
Thermische Verlagerung an Werkzeugmaschinen. Tl. 2
Schmidt, J.; Minges, R.
1990. Werkstattstech. 80 (1990) S. 577-580
Thermische Verlagerung an Werkzeugmaschinen. Tl. 1
Schmidt, J.; Minges, R.
1990. Werkstattstech. 80 (1990) S. 80-82
Werkzeugschneiden beim Stirnfraesen. Grundlagen einer FEM-Beanspruchungsanalyse
Ludwig, H.-R.
1990. Werkstattstech. 80 (1990) S. 353-356
Automatische Beschickung eines Koordinatenmessgeraetes mit schweren Bearbeitungspaletten
Ludwig, H.-R.; Pollmann, W.; Schreck, R.; Weule, H.
1990. Werkstattstech. 80 (1990) S. 89-93
Die Wahl der richtigen Technologie
Kuhn, R.; Schmidt, J.
1990. Tech. Rdsch. 82 (1990) Nr. 41 S. 90-95
Raeumen mit kristallinen Hartstoffen
Kallabis, M.; Scholtes, B.
1990. Tech. Rdsch. 82 (1990) Nr. 49 S. 54-56
Verschleissformen diamantbeschichteter Raeumwerkzeuge
Kallabis, M.
1990. Werkstattstech. 80 (1990) S. 357-360
Integration eines Tastschnittgeraets zur Rauheitsmessung in ein Koordinatenmessgeraet
Golz, H.-U.; Asteriadis, N.; Ehlers, C.; Schepperle, K.; Kedziora, H. J.
1990. Qualitaet u. Zuverlaessigkeit 35 (1990) Nr. 7 S. 243-244
Vorspannungsregelung im Kugelgewindetrieb - ein neuer Ansatz fuer den Werkzeugmaschinenbau?
Golz, H.-U.; Weule, H.
1990. Werkstattstech. 80 (1990) S. 366-368
Simulation des Betriebsverhaltens von Kugelgewindetrieben
Golz, H.-U.
1990. Industrieanz. 112 (1990) Nr. 52 S. 42-43
Automatic caliper changing on coordinate measuring instruments
Golz, H.-U.
1990. Ind. and production engng. 14 (1990) No. 3 S. 64-67
Automatische Tasterwechseleinrichtung fuer Koordinatenmessgeraete
Golz, H.-U.
1990. Qualitaet u. Zuverlaessigkeit 35 (1990) Nr. 5 S. 293-294
Integration von Koordinaten-Messgeraeten in Flexible Fertigungssysteme. Tl. 2
Golz, H.-U.; Ludwig, H.-R.
1990. Werkstatt u. Betrieb 123 (1990) S. 317-318
Integration von Koordinaten-Messgeraeten in Flexible Fertigungssysteme. Tl. 1
Golz, H.-U.; Ludwig, H.-R.
1990. Werkstatt u. Betrieb 123 (1990) S. 147-151
Automatisierte Technologieplanung - Der bessere Plan in kuerzerer Zeit
Rohr, M.
1990. Tech. Rdsch. 82 (1990) Nr. 40 S. 94-98
Rechnerunterstuetzte Pruefplanung am CAD- System
Boes, K.
1990. Tech. Rdsch. 82 (1990) Nr. 37 S. 166-175
Konzepte zur Anbindung von Expertensystemen an betriebliche Datenbanken. Kommunikation statt Isolation
Ganghoff, P.; Steuernagel, R.
1990. Tech. Rdsch. 82 (1990) Nr. 16 S. 52-59
NC-Programme duerfen nicht auf sich warten lassen
Fleischer, J.
1990. Technische Rundschau - Transfer, 82 (45), 108–113
Betrieb und Instandhaltung hydraulischer Anlagen
Noe, T.
1990. Oelhydraul. u. Pneumat. 34 (1990) S. 736- 743
Digitale Lageregelung eines hydraulischen Roboterarmes durch Pumpendirektregelung
Ziegler, R.
1990. Industrieanz. 112 (1990) Nr. 74 S. 42-43
Probleme und Tendenzen bei Lackierrobotern
Weule, H.; Maier, F.
1990. Baender, Bleche, Rohre 31 (1990) S. 155-158
Automatisierte Feinbearbeitung von Hohlformwerkzeugen. Theoret. Unters. von Feinbearbeitungsverf
Weule, H.; Timmermann, S.
1990. Werkstatttstech. 80 (1990) S. 549-555
Automation of the surface finishing in the manufacturing of dies and molds
Weule, H.; Timmermann, S.
1990. CIRP-Annalen 39 (1990) S. 299-303
Automatisierung der Feinbearbeitung in der Fertigung von Hohlformwerkzeugen
Weule, H.; Timmermann, S.
1990. Industrieanz. 112 (1990) Nr. 56 S. 36-37
Besser Planen - mit Rechnereinsatz
Wieser, R.
1990. Tech. Rdsch. 82 (1990) Nr. 3 S. 56-59
Teilefertigung und Montage rechnergestuetzt planen
Weule, H.; Debus, F.; Feller, A. H.
1990. Z. f. wirtschaftl. Fertigung u. Automatisierung 85 (1990) S. 598-601
Orientierungshilfe im Loesungsraum
Feller, A. H.
1990. Tech. Rdsch. 82 (1990) Nr. 11 S. 52-58
Ein Gespraech ueber Qualitaetskosten
Cuntze, E.-O.
1990. Qualitaet u. Zuverlaessigkeit 35 (1990) Nr. 1 S. 15-17
Eine Diagnose - Expertensystem fuer die Leiterplattenfertigung
Achstaetter, J.; Bartl, R.
1990. Automatisierungstech. Prax. 32 (1990) S. 203- 210
Die Sicherung der Mobilität - eine Herausforderung für das nächste Jahrhundert
Weule, H.
1997. In: Mobilität und Gesellschaft. 150 Jahre Carl Benz. Hrsg.: Daimler-Benz AG. Stuttgart 1997. S. 85-94
Begrüßung
Wittig, S.; Weule, H.
1997. In: Mobilität und Gesellschaft. 150 Jahre Carl Benz. Hrsg.: Daimler-Benz AG. Stuttgart 1997. S. 5-7
Entwurf der Systemunterstützung des verteilten Engineering mit Axiomatic Design [online]. PhD dissertation
Lanza, M.
1999. Karlsruhe 1999. (Forschungsberichte aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe. 95.) Fak. f. Maschinenbau, Diss. v. 1.12.1999., Universität Karlsruhe (TH). doi:10.5445/IR/62499
Estimation of two-dimension tool wear based on finite element method [online]. PhD dissertation
Xie, L.
2004. Karlsruhe 2004. (Forschungsberichte aus dem wbk Institut für Produktionstechnik, Universität Karlsruhe (TH). 120.) Fak. f. Maschinenbau, Diss. v. 5.2.2004., Universität Karlsruhe (TH). doi:10.5445/IR/512004
Jahresbericht. Lehrstuhl und Institut für Werkzeugmaschinen und Betriebstechnik, Universität Karlsruhe. 2002
Lehrstuhl und Institut für Werkzeugmaschinen und Betriebstechnik (Ed.)
2003. Universität Karlsruhe (TH). doi:10.5445/IR/402003
Beitrag zur Simulation zerspanungstechnologischer Vorgänge mit Hilfe der Finite-Element-Methode [online]. PhD dissertation
Soehner, J.
2003. Karlsruhe 2003. (Forschung aus dem Institut für Werkzeugmaschinen und Betriebstechnik der Universität Karlsruhe (TH). 118.) Fak. f. Maschinenbau, Diss. v. 30.4.2003., Universität Karlsruhe (TH). doi:10.5445/IR/2392003
Management von Erfahrungen mit einem Assistenzsystem für die Arbeitsplanung. PhD dissertation
Gerken, H. A.
2000. Fak. f. Maschinenbau, Diss. v. 18.12.2000., Universität Karlsruhe (TH). doi:10.5445/IR/12732000
Adaptronische Strebe zur Steifigkeitssteigerung von Werkzeugmaschinen. PhD dissertation
Munzinger, C.
2007. Shaker Verlag
Kugelgewindetriebe mit hohem Druckwinkel. PhD dissertation
Dambacher, U.
2005. Universität Karlsruhe (TH)
2-D FEM simulation of chip formation and estimation of tool wear in continous orthogonal cutting
Schmidt, J.; Xie, L.; Biesinger, F.
2005. Wear, 258 (10), 1479–1490
Simulation des Spanbildungsprozesses beim Hochgeschwindigkeitsfräsen.
Schmidt, J.; Schmidt, C.; Söhner, J.; Vöhringer, O.; Schulze, V.; Biesinger, F.; Delonnoy, L.
2003. Spanen metallischer Werkstoffe mit hohen Geschwindigkeiten., x-y, Wiley-VCH Verlag
Unternehmensübergreifende Kommunikation und deren technische Realisierungsmöglichkeiten
Armbruster, M.
2003. Informationslogostik und Prozessmanagement. Hrsg.: H. Grabowski, 181–193, Logos Verlag Berlin
Einsatz der Prozessmanagementmethoden
Schramm, M.; Armbruster, M.; Both, P. von; Klimesch, C.; Syrjakow, E.; Taminé, O.
2003. Informationslogostik und Prozessmanagement. Hrsg.: H. Grabowski, 145–180, Logos Verlag Berlin
Prozesscontrolling durch Informationsverdichtung
Armbruster, M.
2003. Informationslogostik und Prozessmanagement. Hrsg.: H. Grabowski, 125–143, Logos Verlag Berlin
Geometrischer Entwurf mikromechatronischer Systeme. PhD dissertation
Blessing, A.
2004. Universität Karlsruhe (TH)