David Schröder, M. Eng.

  • 76131 Karlsruhe
    Kaiserstraße 12

David Schröder, M. Eng.

Area of Research:

  • Electric drives manufacturing

General Tasks:

  • Workshop “Working methods for mechanical Engineering” (educational course)

Projects:

  • AgiloDrive2 - Agile production system for electric traction motors

Curriculum Vitae:

since 03/2023

Research Associate at the Institute of Production Science (wbk) at Karlsruhe Institute of Technology (KIT)

10/2020-06/2022

Masters Degree: Systems Engineering and Management – Mechanical Engineering at the Ulm University of Applied Sciences

10/2017-09/2020 

Bachelors Degree: Mechanical Engineering – Production Engineering at the DHBW Heidenheim

Publications


Improving Production System Flexibility and Changeability Through Software-Defined Manufacturing
Behrendt, S.; Ungen, M.; Fisel, J.; Hung, K.-C.; May, M.-C.; Leberle, U.; Lanza, G.
2023. A. B. T. M. H.-C. Liewald Mathiasand Verl (Ed.), Production at the Leading Edge of Technology – Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Ed.: M. Liewald, 705–716, Springer International Publishing. doi:10.1007/978-3-031-18318-8_70
A New Approach to Consider Influencing Factors in the Design of Global Production Networks
Martin, M.; Peukert, S.; Lanza, G.
2023. Production at the Leading Edge of Technology. Hrsg.: M. Liewald, 623–632, Springer Nature Switzerland AG. doi:10.1007/978-3-031-18318-8_62
Analyse der Kinematik und Kinetik von Planetenwälzgewindetrieben. PhD dissertation
Merz, S.
2023, June 2. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000159021
Short-time induction heat treatment of high speed steel AISI M2: Laboratory proof of concept and application-related component tests
Damon, J.; Schüßler, P.; Mühl, F.; Dietrich, S.; Schulze, V.
2023. Materials & Design, 230, Artkl.Nr.: 111991. doi:10.1016/j.matdes.2023.111991
Understanding the gear surface enhancement by hard-hobbing via ferritic-martensitic grain analysis
Fang, Z.; Ren, Z.; Schulze, V., (2); Feng, Y.; Nagata, T.; Furukawa, S.; Tomiyama, K.; Kizaki, T., (2)
2023. CIRP Annals. doi:10.1016/j.cirp.2023.04.007
Extended Production Planning of Reconfigurable Manufacturing Systems by Means of Simulation-based Optimization
Behrendt, S.; Wurster, M.; May, M. C.; Lanza, G.
2023. 4th Conference on Production Systems and Logistics (CPSL 2023), 210–220, publish-Ing. doi:10.15488/13440
Enhanced chip analysis with computed tomography for estimation of chip segmentation frequency
Diaz Ocampo, D.; Koch, J.; González, G.; Zanger, F.; Heizmann, M.
2023. Production Engineering. doi:10.1007/s11740-023-01200-y
Fostering robustness in production networks in an increasingly disruption-prone world
Peukert, S.; Hörger, M.; Lanza, G.
2023. CIRP Journal of Manufacturing Science and Technology, 41, 413–429. doi:10.1016/j.cirpj.2023.01.002
Case-based reasoning user support for industrial x-ray computed tomography
Schild, L.; Höger, K.; Zanini, F.; Lanza, G.; Carmignato, S.
2023. Measurement Science and Technology, 34 (4), Article no: 045403. doi:10.1088/1361-6501/acacba
Laser surface hardening: A simulative study of tempering mechanisms on hardness and residual stress
Schüßler, P.; Damon, J.; Mühl, F.; Dietrich, S.; Schulze, V.
2023. Computational Materials Science, 221, Art.-Nr.: 112079. doi:10.1016/j.commatsci.2023.112079
In-Process Monitoring of Hobbing Process Using an Acoustic Emission Sensor and Supervised Machine Learning
Schiller, V.; Klaus, S.; Bilen, A.; Lanza, G.
2023. Algorithms, 16 (4), Art.-Nr.: 183. doi:10.3390/a16040183
Performance parameters for evaluating pore detection ability of computed tomography systems
Höger, K.; Schild, L.; Weiser, L.; Lanza, G.
2023. 12th International Conference on Industrial Computed Tomography, Fürth, Germany (iCT 2023)
Enhancing the prediction quality of mechanical properties for powder bed fusion with laser beam by dynamic observation of flying particles
Nagato, K.; Ozawa, T.; Neuenfeldt, M.; Zanger, F.; Zhao, M.; Schulze, V.
2023. Materials and Design, 227, Art.-Nr.: 111696. doi:10.1016/j.matdes.2023.111696
Discriminative feature learning through feature distance loss
Schlagenhauf, T.; Lin, Y.; Noack, B.
2023. Machine Vision and Applications, 34 (2), Art.-Nr.: 25. doi:10.1007/s00138-023-01379-1
High cycle fatigue behaviour of AISI 4140 steel manufactured by laser-powder bed fusion
Shi, C.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. International Journal of Fatigue, 168, Article no: 107469. doi:10.1016/j.ijfatigue.2022.107469
Approach to Develop a Lightweight Potential Analysis at the Interface Between Product, Production and Material
Zeidler, S.; Scholz, J.; Friedmann, M.; Fleischer, J.
2023. Production at the leading edge of technology : Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP), University of Stuttgart, October 2022. Ed.: M. Liewald, 696–704, Springer International Publishing. doi:10.1007/978-3-031-18318-8_69
Machine Learning in Manufacturing towards Industry 4.0: From ‘For Now’ to ‘Four-Know’
Chen, T.; Sampath, V.; May, M. C.; Shan, S.; Jorg, O. J.; Aguilar Martín, J. J.; Stamer, F.; Fantoni, G.; Tosello, G.; Calaon, M.
2023. Applied Sciences (Switzerland), 13 (3), Art.-Nr.: 1903. doi:10.3390/app13031903
Process development for the hybrid additive manufacturing of metallic structures on polymer substrates
Czink, S.; Lubkowitz, V.; Dietrich, S.; Schulze, V.
2023. Additive Manufacturing Letters, Art.-Nr.: 100132. doi:10.1016/j.addlet.2023.100132
Use Cases for Digital Twins in Battery Cell Manufacturing
Henschel, S.; Otte, S.; Mayer, D.; Fleischer, J.
2023. Production at the Leading Edge of Technologye. Hrsg.: M. Liewald, 833–842, Springer Nature Switzerland AG. doi:10.1007/978-3-031-18318-8_82
Identification of hybridization strategies for combining fused filament fabrication with unidirectional tape reinforcement
Matkovic, N.; Höger, K.; Friedmann, M.; Stamer, F.; Fleischer, J.; Lanza, G.
2023. Composites Communications, 38, Art.Nr. 101484. doi:10.1016/j.coco.2022.101484
In-situ characterization of tool temperatures using in-tool integrated thermoresistive thin-film sensors
González, G.; Plogmeyer, M.; Schoop, J.; Bräuer, G.; Schulze, V.
2023. Production Engineering. doi:10.1007/s11740-023-01186-7
Self-healing Fuel Cells by Biological Actuators
Gartner, P.; Lanza, G.; Rudat, J.; Bilger, M.; Grünert, T.; Nesterov-Mueller, A.; Zimmerer, N.; Quarz, P.; Scharfer, P.; Schabel, W.; Jung, A. P.; Stahlberger, M.; Bräse, S.
2023. Procedia CIRP, 116, 161–166. doi:10.1016/j.procir.2023.02.028
Selective Peptide Binders to the Perfluorinated Sulfonic Acid Ionomer Nafion
Schmidt, D.; Gartner, P.; Berezkin, I.; Rudat, J.; Bilger, M.; Grünert, T.; Zimmerer, N.; Quarz, P.; Scharfer, P.; Brückel, J.; Jung, A. P.; Singh, P.; Pooja, P.; Meier, B.; Stahlberger, M.; Schabel, W.; Bräse, S.; Lanza, G.; Nesterov-Mueller, A.
2023. Advanced Functional Materials, Article no: 2214932. doi:10.1002/adfm.202214932
Siamese Basis Function Networks for Data-Efficient Defect Classification in Technical Domains
Schlagenhauf, T.; Yildirim, F.; Brückner, B.
2023. Software Engineering and Formal Methods. SEFM 2022 Collocated Workshops – AI4EA, F-IDE, CoSim-CPS, CIFMA, Berlin, Germany, September 26–30, 2022, Revised Selected Papers. Ed.: P. Masci, 71–92, Springer International Publishing. doi:10.1007/978-3-031-26236-4_7
Misalignment detection on linear feed axis using sensorless motor current signals
Demetgul, M.; Zihan, M.; Heider, I.; Fleischer, J.
2023. The International Journal of Advanced Manufacturing Technology. doi:10.1007/s00170-023-11258-8
Sim2real Transfer Learning for Point Cloud Segmentation: An Industrial Application Case on Autonomous Disassembly
Wu, C.; Bi, X.; Pfrommer, J.; Cebulla, A.; Mangold, S.; Beyerer, J.
2023. 2023 IEEE/CVF Winter Conference on Applications of Computer Vision (WACV), 4520–4529, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WACV56688.2023.00451
Flexible Twisting Process of Stators with Hairpin Winding
Hausmann, L.; Wirth, F.; Fleischer, J.
2023. 2022 12th International Electric Drives Production Conference (EDPC), 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC56367.2022.10019760
Creation and validation of systems for product and process configuration based on data analysis
Frey, A. M.; May, M. C.; Lanza, G.
2023. Production Engineering, 12 (2), 263–277. doi:10.1007/s11740-022-01176-1
Graph-based prediction of missing KPIs through optimization and random forests for KPI systems
May, M. C.; Fang, Z.; Eitel, M. B. M.; Stricker, N.; Ghoshdastidar, D.; Lanza, G.
2023. Production Engineering, 17 (2), 211–222. doi:10.1007/s11740-022-01179-y
Stainless Steels for Plastic Mold Frames Featuring Enhanced Machinability
Niederhofer, P.; Henke, L.; Frie, D.; Neuenfeldt, M.; Zanger, F.
2023. steel research international, Art.-Nr.: 2200754. doi:10.1002/srin.202200754
Quality assurance for flexible stack assembly of lithium‐ion cells
Kollenda, A.; Husseini, K.; Henschel, S.; Schmidgruber, N.; Becker-Koch, D.; Braunwarth, W.; Fleischer, J.; Daub, R.
2023. Energy Technology. doi:10.1002/ente.202201059
Function-oriented defect assessment in hybrid sheet molding compound tensile specimen using surrogate models
Bretz, L.; Koch, D.; Debowski, K.; Höger, K.; Lanza, G.
2023. Production Engineering, 17 (2), 223–236. doi:10.1007/s11740-022-01174-3
Analysis of the visually detectable wear progress on ball screws
Schlagenhauf, T.; Scheurenbrand, T.; Hofmann, D.; Krasnikow, O.
2023. CIRP Journal of Manufacturing Science and Technology, 40, 1–9. doi:10.1016/j.cirpj.2022.10.003
Approach for Evaluating Changeable Production Systems in a Battery Module Production Use Case
Fries, C.; Hölscher, P.; Brützel, O.; Lanza, G.; Bauernhansl, T.
2023. Flexible Automation and Intelligent Manufacturing: The Human-Data-Technology Nexus – Proceedings of FAIM 2022, June 19–23, 2022, Detroit, Michigan, USA. Ed.: K.-Y. Kim, 207–216, Springer International Publishing. doi:10.1007/978-3-031-18326-3_21
Optimal Robot Workpiece Placement for Maximized Repeatability
Baumgärtner, J.; Gönnheimer, P.; Fleischer, J.
2023. Advances in System-Integrated Intelligence – Proceedings of the 6th International Conference on System-Integrated Intelligence (SysInt 2022), September 7-9, 2022, Genova, Italy. Ed.: M. Valle, 252–261, Springer International Publishing. doi:10.1007/978-3-031-16281-7_25
Kategorisierung und Erstbeurteilung von Wandlungstreibern [Categorization and Initial Assessment of Change Drivers]
Martin, M.; Lars Heege, S.; Peukert, S.; Lanza, G.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 842–846. doi:10.1515/zwf-2022-1171
Agile Erstellung von Materialflusssimulationen [Agile Concept for the Creation of Material Flow Simulations]
Benfer, M.; Autenrieth, M.; Brützel, O.; Grützner, H.; Peukert, S.; Lanza, G.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 867–871. doi:10.1515/zwf-2022-1158
Zukunftsfähige Produktionsnetzwerke in disruptiven Zeiten
Schuh, G.; Friedli, T.; Lanza, G.; Schollemann, A.; Specht, F.; Benfer, M.
2022. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 117 (12), 794–798. doi:10.1515/zwf-2022-1160
Generation of Initial Fiber Orientation States for Long Fiber Reinforced Thermoplastic Compression Molding Simulation
Schreyer, L.; Blarr, J.; Höger, K.; Meyer, N.; Kärger, L.
2022. Composites Meet Sustainability : Proceedings of the 20th European Conference on Composite Materials, ECCM20. 26-30 June, 2022, Lausanne, Switzerland. Bd.: 4. Ed.: A. Vassilopoulos, 687–694, École Polytechnique Fédérale de Lausanne (EPFL)
Systematic quantitative investigation of the unscrewing process with regard to breakaway torque
Mangold, S.; Gerlitz, E.; Zimprich, S.; Friedmann, M.; Matthiesen, S.; Fleischer, J.
2022. Journal of Remanufacturing, 13, 53–66. doi:10.1007/s13243-022-00120-x
Tracing the technology development and trends of hard carbon anode materials - A market and patent analysis
Liu, H.; Baumann, M.; Dou, X.; Klemens, J.; Schneider, L.; Wurba, A.-K.; Häringer, M.; Scharfer, P.; Ehrenberg, H.; Schabel, W.; Fleischer, J.; von der Aßen, N.; Weil, M.
2022. Journal of Energy Storage, 56 (B), Art.-Nr.: 105964. doi:10.1016/j.est.2022.105964
Autonomous Visual Detection of Defects from Battery Electrode Manufacturing
Choudhary, N.; Clever, H.; Ludwigs, R.; Rath, M.; Gannouni, A.; Schmetz, A.; Hülsmann, T.; Sawodny, J.; Fischer, L.; Kampker, A.; Fleischer, J.; Stein, H. S.
2022. Advanced Intelligent Systems, 4 (12), Art.-Nr.: 2200142. doi:10.1002/aisy.202200142
Latest advances in cloud manufacturing and global production networks enabling the shift to the mass personalization paradigm
Lanza, G.; Peukert, S.; Steier, G. L.
2022. Design and Operation of Production Networks for Mass Personalization in the Era of Cloud Technology, 39–77, Elsevier. doi:10.1016/B978-0-12-823657-4.00008-7
Faserblasverfahren für biologische Bauteile
Mangold, S.; Kist, S.; Friedmann, M.; Fleischer, J.
2022. VDI-Z, 164 (11-12), 67–69. doi:10.37544/0042-1766-2022-11-12-67
Influence of Hybrid-Additive Interfaces Manufactured by Laser Powder Bed Fusion on the Surface Topography after Machining of Ti-6Al-4V
Fischmann, P.; Schulze, V.; Zanger, F.
2022. 22nd Machining Innovations Conference for Aerospace Industry 2022 (MIC 2022), November 30th and December 1st 2022, Hannover, Germany, 88–93, SSRN. doi:10.2139/ssrn.4259263
Single part tracking enabled by fluorescent Polysecure tracing particles in AM parts
Gartner, P.; Krischke, N.; Benfer, M.; Bender, M.; Lanza, G.; Fleischer, J.; Dost, G.
2022. D. L. Bourell (Ed.), Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference Hrsg.: Bourell, David L., 1998–2010, Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference
Entwicklung einer autonomen Elektrodenbeschichtung = Development of an Autonomous Electrode Coating
Denk, F.; Hoffmann, A.; Höger, K.; Pfrommer, J.; Poyer, M.; Scharfer, P.; Spiegel, S.; Fleischer, J.; Lanza, G.; Schabel, W.
2022. Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 117 (10), 673–676. doi:10.1515/zwf-2022-1128
Federnde Rotorkomponenten für elektrische Antriebe = Spring-loaded Rotor Components for Electric drives
Wößner, W.; Gürbüz, H.; Heim, M.; Klein, N.; Schulz, J.; Fleischer, J.
2022. Zeitschrift Kunststofftechnik/Journal of Plastics Technology, 117 (10), 667–672. doi:10.1515/zwf-2022-1103
Explainable reinforcement learning in production control of job shop manufacturing system
Kuhnle, A.; May, M. C.; Schäfer, L.; Lanza, G.
2022. International Journal of Production Research, 60 (19), 5812–5834. doi:10.1080/00207543.2021.1972179
Thermomechanical multiscale PBF-LB-process simulation of macroscopic structures to predict part distortion recoater collisions
Drechsel, K.; Frey, M.; Schulze, V.; Zanger, F.
2022. M. Liewald, A. Verl, T. Bauernhansl & H.-C. Möhring (Eds.), Production at the Leading Edge of Technology Hrsg.: Liewald, Matthias; Verl, Alexander; Bauernhansl, Thomas; Möhring, Hans-Christian. Proceedings of the 12th Congress of the German Academic Association for Production Technology (WGP) Stuttgart, Deutschland, 12.10.2022–13.10.2022, 366–375, Springer. doi:10.1007/978-3-031-18318-8_38
Dynamic Pricing Model for Batch-Specific Tolerance Allocation in Collaborative Production Networks
Silbernagel, R.; Wagner, C.; Peukert, S.; Lanza, G.
2022. (J.-Y. Dantan, G. Lanza & L. Homri, Eds.) 17th CIRP Conference on Computer Aided Tolerancing (CAT2022) Hrsg.: Dantan, Jean-Yves; Lanza, Gisela; Homri, Lazhar, 114, 153–158. doi:10.1016/j.procir.2022.10.022
Industrielles Transferlernen : Der Schlüssel zur Übertragung von Künstlicher Intelligenz = Industrial Transfer Learning : The Key to Transfer Artificial Intelligence
Netzer, M.; Alexander, P.; Gönnheimer, P.; Fleischer, J.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (9), 597–599. doi:10.1515/zwf-2022-1109
Optimierung einer Materialflusssteuerung zur Energieeffizienzerhöhung in der Produktion
Brützel, O.; Thiery, D.; May, M.; Lanza, G.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (9), 591–596. doi:10.1515/zwf-2022-1106
Digitalisierung in der Supply Chain: Trends und Anwendungsfelder in der Branche der Antriebstechnik des Maschinen- und Anlagenbaus
Overbeck, L.; Baralija, D.; Silbernagel, R.; Rauen, H.; Fleischer, J.; Lanza, G.
2022. Industrie 4.0 Management, 2022 (4), 23–27
Produkt-Produktions-CoDesign: Ein Ansatz zur integrierten Produkt- und Produktionssystementwickung über Generationen und Lebenszyklen hinweg
Albers, A.; Rapp, S.; Klippert, M.; Lanza, G.; Schäfer, L.
2022. News / Wissenschaftliche Gesellschaft für Produktentwicklung, WiGeP, Berliner Kreis & WGMK, (1), 3
Concept Development and Validation of Manufacturing Processes for Integrating Current-Carrying Conductors in Ceramic Substrates
Schubert, J.; Rosen, M.; Zanger, F.
2022. B.-A. Behrens, A. Brosius, W.-G. Drossel, W. Hintze, S. Ihlenfeldt & P. Nyhuis (Eds.), Production at the Leading Edge of Technology : Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Ed. by Bernd-Arno Behrens, Alexander Brosius, Welf-Guntram Drossel, Wolfgang Hintze, Steffen Ihlenfeldt, Peter Nyhuis, 339–348, Springer International Publishing. doi:10.1007/978-3-030-78424-9_38
Wälzschälen mit kleinen Achskreuzwinkeln : Prozessgrenzen und Umsetzbarkeit. PhD dissertation
Vargas, B.
2022, August 5. Shaker Verlag
Practice-oriented methodology for increasing production ramp-up efficiency in global production networks of SME
Verhaelen, B.; Martin, M.; Peukert, S.; Lanza, G.
2022. Production Engineering, 17, 145–177. doi:10.1007/s11740-022-01154-7
Ultrasonic evaluation of elastic properties in laser powder bed fusion manufactured AlSi10Mg components
Czink, S.; Dietrich, S.; Schulze, V.
2022. NDT & E International, 132, Article no: 102729. doi:10.1016/j.ndteint.2022.102729
Mechanical surface treatment of EBM Ti6Al4V components: Effects of the resulting surface layer state on fatigue mechanisms and service life
Damon, J.; Czink, S.; Schüßler, P.; Antusch, S.; Klein, A.; Send, S.; Dapprich, D.; Dietrich, S.; Schulze, V.
2022. Materials Science and Engineering: A, 849, Art.-Nr. 143422. doi:10.1016/j.msea.2022.143422
Assessing the optical configuration of a structured light scanner in metrological use
Schild, L.; Sasse, F.; Kaiser, J.-P.; Lanza, G.
2022. Measurement Science and Technology, 33 (8), Art.-Nr.: 085018. doi:10.1088/1361-6501/ac6e2f
The Role of Intangible Influencing Factors in Strategic Network Decision-Making [in press]
Steier, G. L.; Silbernagel, R.; Maier, T.; Peukert, S. K.; Lanza, G.
2022. 29th EurOMA Conference, July 1 - 6, 2022. Book of Proceedings
Agile Produktionssysteme in der Batteriezellfertigung
Kößler, F.; Mayer, D.; Fleischer, J.
2022. wt Werkstattstechnik online, 112 (44780), 492–495. doi:10.37544/1436-4980-2022-7-8-46
Product-Production-Co-Design for Agile Production of Electric Traction Motors
Fleischer, J.; Doppelbauer, M.; Albers, A.; Fraider, F.; Halwas, M.; Schmitt, M.; Breining, P.; Braumandl, A.; Kübler, M.; Bause, K.; Ott, S.
2022. T. E. A. for Electromobility (Ed.), 35th International Electric Vehicle Symposium and Exhibition
Opportunistic maintenance scheduling with deep reinforcement learning
Valet, A.; Altenmüller, T.; Waschneck, B.; May, M. C.; Kuhnle, A.; Lanza, G.
2022. Journal of Manufacturing Systems, 64, 518–534. doi:10.1016/j.jmsy.2022.07.016
Life cycle assessment (LCA) of a battery home storage system based on primary data
Jasper, F. B.; Späthe, J.; Baumann, M.; Peters, J. F.; Ruhland, J.; Weil, M.
2022. Journal of Cleaner Production, 366, Article: 132899. doi:10.1016/j.jclepro.2022.132899
Hybrid material extrusion 3D printing to strengthen interlayer adhesion through hot rolling
Andreu, A.; Kim, S.; Dittus, J.; Friedmann, M.; Fleischer, J.; Yoon, Y.-J.
2022. Additive Manufacturing, 55, Art.-Nr.: 102773. doi:10.1016/j.addma.2022.102773
Der Mensch im Fokus : Integration von Assistenzsystemen entlang einer Montagelinie für Elektromotoren = Focus on People : Integration of Assistance Systems along an Assembly Line for Electric Motors
Dvorak, J.; Kandler, M.; Clever, F.; Mahanty, W.; Beiner, S.; Lanza, G.; Kinkel, S.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (6), 415–418. doi:10.1515/zwf-2022-1071
Highly dynamic robotic leg for non-biomimetic walking robots
Baumgaertner, J.; Bach, J.; Masia, L.; Badreddin, E.; Pott, P. P.
2022. ACTUATOR 2022; International Conference and Exhibition on New Actuator Systems and Applications, Mannheim, Deutschland, 29-30 June 2022, 1–4, Institute of Electrical and Electronics Engineers (IEEE)
Einfluss der Oberflächenbearbeitung, Prozessstellgrößen und Wärmebehandlung auf das mechanische Verhalten von hybriden Aluminiumbauteilen
Drechsel, K.; Schulze, V.; Zanger, F.
2022. Additive Fertigung : Werkstoffe - Prozesse - Wärmebehandlung = Additive Manufacturing : Materials – Processes - Heat Treatment (AWT 2022), Bremen, 29.-30. Juni 2022, 151–160, Arbeitsgemeinschaft Wärmebehandlung und Werkstofftechnik e. V
Wandlungsfähige Produktion für die Kreislaufwirtschaft
Beyerer, J.; Bretthauer, G.; Hofmann, C.; Lanza, G.
2022. at - Automatisierungstechnik, 70 (6), 501–503. doi:10.1515/auto-2022-0063
An ontology for remanufacturing systems = Eine Ontologie für Remanufacturing-Systeme
Pfrommer, J.; Klein, J.-F.; Wurster, M.; Rapp, S.; Grauberger, P.; Lanza, G.; Albers, A.; Matthiesen, S.; Beyerer, J.
2022. at - Automatisierungstechnik, 70 (6), 534–541. doi:10.1515/auto-2021-0156
Agiles Produktionssystem mittels lernender Roboter bei ungewissen Produktzuständen am Beispiel der Anlasser-Demontage = Concept of an agile production system based on learning robots applied to disassembly
Lanza, G.; Asfour, T.; Beyerer, J.; Deml, B.; Fleischer, J.; Heizmann, M.; Furmans, K.; Hofmann, C.; Cebulla, A.; Dreher, C.; Kaiser, J.-P.; Klein, J.-F.; Leven, F.; Mangold, S.; Mitschke, N.; Stricker, N.; Pfrommer, J.; Wu, C.; Wurster, M.; Zaremski, M.
2022. at - Automatisierungstechnik, 70 (6), 504–516. doi:10.1515/auto-2021-0158
Integrierte Steuerungsarchitektur für ein agiles Demontagesystem mit autonomer Produktbefundung = ntegrated control architecture for an agile disassembly system with autonomous product inspection
Wurster, M.; Klein, J.-F.; Kaiser, J.-P.; Mangold, S.; Furmans, K.; Heizmann, M.; Fleischer, J.; Lanza, G.
2022. at - Automatisierungstechnik, 70 (6), 542–556. doi:10.1515/auto-2021-0157
Agile Production Systems for Electric Mobility
Fleischer, J.; Fraider, F.; Kößler, F.; Mayer, D.; Wirth, F.
2022. Procedia CIRP Volume 107, 107, 1251–1256. doi:10.1016/j.procir.2022.05.140
Analysis of chip segmentation frequencies in turning Ti-6Al-4V for the prediction of residual stresses
Pachnek, F.; González, G.; Ocampo, D. D.; Heizmann, M.; Zanger, F.
2022. Procedia CIRP, 108, 188–193. doi:10.1016/j.procir.2022.03.033
Modeling of surface hardening and roughness induced by turning AISI 4140 QT under different machining conditions
Stampfer, B.; Bachmann, J.; Gauder, D.; Böttger, D.; Gerstenmeyer, M.; Lanza, G.; Wolter, B.; Schulze, V.
2022. Procedia CIRP, 108, 293–298. doi:10.1016/j.procir.2022.03.050
Effect of thermomechanical loads and nanocrystalline layer formation on induced surface hardening during orthogonal cutting of AISI 4140
González, G.; Sauer, F.; Plogmeyer, M.; Gerstenmeyer, M.; Bräuer, G.; Schulze, V.
2022. Procedia CIRP, 108, 228–233. doi:10.1016/j.procir.2022.03.040
Digitalization of Battery Manufacturing: Current Status, Challenges, and Opportunities
Ayerbe, E.; Berecibar, M.; Clark, S.; Franco, A. A.; Ruhland, J.
2022. Advanced Energy Materials, 12 (17), Art. Nr.: 2102696. doi:10.1002/aenm.202102696
Rechargeable Batteries of the Future—The State of the Art from a BATTERY 2030+ Perspective
Fichtner, M.; Edström, K.; Ayerbe, E.; Berecibar, M.; Bhowmik, A.; Castelli, I. E.; Clark, S.; Dominko, R.; Erakca, M.; Franco, A. A.; Grimaud, A.; Horstmann, B.; Latz, A.; Lorrmann, H.; Meeus, M.; Narayan, R.; Pammer, F.; Ruhland, J.; Stein, H.; Vegge, T.; Weil, M.
2022. Advanced Energy Materials, 12 (17), 2102904. doi:10.1002/aenm.202102904
Modular, Digital Shopfloor Management Model – A Maturity Assessment For A Human-Oriented Transformation Process
Kandler, M.; Gabriel, P.; Schröttle, V.; May, M. C.; Lanza, G.
2022. Proceedings CPSL 2022 : Proceedings of the Conference on Production Systems and Logistics : CPSL 2022. Ed.: D. Herberger, 642–651, publish-Ing. doi:10.15488/12153
Gripper integrated vision system for on-the-fly position measurement of individual components in fuel cell stacking
Schäfer, J.; Fleischer, J.
2022. FC³ - Fuel Cell Conference Chemnitz 2022, 31.5.-1-6-2022 Chemnitz, 9 S., HZwo
Framework for the Application of Industry 4.0 in Lithium-Ion Battery Cell Production
Schmied, J.; Puchta, A.; Scharmann, T.; Töpper, H.-C.; Kampker, A.; Jürgen, F.; Dröder, K.; Daub, R.
2022. Proceedings of the Conference on Production Systems and Logistics, CPSL 17th - 20th May, Vancouver 2022, 151–160, Leibniz Universität Hannover. doi:10.15488/12168
Genauigkeitsgrenzen modularer Betontragwerke – Teil 1: Beschreibung von geometrischen Abweichungen infolge Schwinden
Stindt, J.; Frey, A. M.; Forman, P.; Lanza, G.; Mark, P.
2022. Beton- und Stahlbetonbau, 117 (5), 296–309. doi:10.1002/best.202200010
Genauigkeitsgrenzen modularer Betontragwerke – Teil 2: Probabilistische Bewertung der Montage mit Schraubenverbindung
Stindt, J.; Frey, A. M.; Forman, P.; Lanza, G.; Mark, P.
2022. Beton- und Stahlbetonbau, 117 (5), 310–323. doi:10.1002/best.202200011
Anwendung von Datenanalyse im Qualitätsmanagement : Ein integriertes Vorgehensmodell = Application of Data Analysis in Quality Management : An Integrated Process Model
Frey, A. M.; Pampus, O.; Stadler, F.; Erdler, G.-A.; Lanza, G.
2022. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 117 (4), 182–186. doi:10.1515/zwf-2022-1043
New Competences in a Digitalized Shopfloor – A Modular Training Concept for Learning Factories
Schäfer, L.; Ströhlein, K.; Kandler, M.; Hulla, M.; Ast, J.; Lanza, G.; Nieken, P.; Ramsauer, C.; Nyhuis, P.
2022. SSRN eLibrary, Art.-Nr. 4071822. doi:10.2139/ssrn.4071822
Automated Configuration of Modular Gripper Fingers
Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 106, 70–75. doi:10.1016/j.procir.2022.02.157
Keine Angst vor Künstlicher Intelligenz in der Produktion
Armbruster, J.; Gönnheimer, P.; Netzer, M.
2022, April
Novel Robot-Based Process Chain for the Flexible Production of Thermoplastic Components with CFRP Tape Reinforcement Structures
Matkovic, N.; Kupzik, D.; Steidle-Sailer, C.; Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 106, 21–26. doi:10.1016/j.procir.2022.02.149
Conceptual control architecture for future highly flexible production systems
Mühlbeier, E.; Oexle, F.; Gerlitz, E.; Matkovic, N.; Gönnheimer, P.; Fleischer, J.
2022. Procedia CIRP, 106, 39–44. doi:10.1016/j.procir.2022.02.152
Decision Experiments in the Learning Factory: A Proof of Concept
Ströhlein, K.; Gorny, P. M.; Kandler, M.; Schäfer, L.; Nieken, P.; Lanza, G.
2022. Proceedings of the 12th Conference on Learning Factories (CLF 2022), Art.-Nr. 4072356, SSRN. doi:10.2139/ssrn.4072356
Successful Collaboration in Global Production Networks - fair, secured, connected
Silbernagel, R.; Stamer, F.; Sautter, B.
2022, April 1. (G. Lanza, Ed.), wbk Institut für Produktionstechnik
TriP: A Python package for the kinematic modeling of serial-parallel hybrid robots
Baumgärtner, J.; Miller, T.
2022. Journal of Open Source Software, 7 (71), 3967. doi:10.21105/joss.03967
Erfolgreiche Kollaboration in Produktionsnetzwerken - fair, sicher, vernetzt
Silbernagel, R.; Stamer, F.
2022, March 15. (G. Lanza & C. Weinhardt, Eds.), wbk Institut für Produktionstechnik
Vision-Based Screw Head Detection for Automated Disassembly for Remanufacturing
Mangold, S.; Steiner, C.; Friedmann, M.; Fleischer, J.
2022. Procedia CIRP, 105. doi:10.1016/j.procir.2022.02.001
Investigations for the Optimization of Metal Freeforming using the ARBURG freeformer
Krischke, N.; Friedmann, M.; Fleischer, J.
2022. D. Bourell (Ed.), Solid Freeform Fabrication 2022: Proceedings of the 33rd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Austin, Texas, USA, July 25-27, 2022, Hrsg.: Bourell, Dave, 1001–1009
Main time-parallel mechanical surface treatment and surface texturing during machining
Schwalm, J.; Mann, F.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2022. Procedia CIRP, 108, 240–245. doi:10.1016/j.procir.2022.03.042
Gripper integrated vision guided assembly of PEM fuel cells
Schäfer, J.; Allmendinger, S.; Fleischer, J.
2022. Procedia CIRP, 106, 180–184. doi:10.1016/j.procir.2022.02.175
Final Report Sino-German Industry 4.0 Factory Automation Platform
Albers, A.; Ovtcharova, J.; Becker, J.; Lanza, G.; Zhang, W.; Zhang, T.; Qiao, F.; Ma, Y.; Wang, J.; Wu, Z.; Ehrmann, C.; Gönnheimer, P.; Behrendt, M.; Mandel, C.; Stürmlinger, T.; Klippert, M.; Kimmig, A.; Schade, F.; Yang, S.; Heider, I.; Xie, S.; Song, K.; Peng, J.; Goncalves, P.; Kampfmann, R.; Schlechtendahl, J.; Kattner, J.; Straub, C.; May, M.; Zhu, Z.; Bai, O.; Lin, Y.; Yang, Z.; Ding, L.; Rossol, A.-S.
2022. (J. Fleischer, Ed.), Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000143693
Decision support models for strategic production network configuration – A systematic literature analysis
Steier, G. L.; Benfer, M.; Werz, P.; Ziora, M.; Lanza, G.
2022. (D. C. Amir Malakizadi Peter Krajnik, Ed.) 55th CIRP Conference on Manufacturing Systems Hrsg.: Amir Malakizadi, Danfang Chen, Peter Krajnik, 107, 1433–1438. doi:10.1016/j.procir.2022.05.170
A Framework for Integration of Resource Allocation and Reworking Concept into Design Optimisation Problem
Khezri, A.; Homri, L.; Etienne, A.; Etienne, A.; Dantan, J.-Y.; Lanza, G.
2022. IFAC-PapersOnLine, 55 (10), 1037–1042. doi:10.1016/j.ifacol.2022.09.524
Optimal line configurations for agile production systems for battery cell manufacturing
Overbeck, S.; Lanza, G.; Voigtländer, L.
2022. 16th CIRP Conference on Intelligent Computation in Manufacturing Engineering, CIRP ICME, 13th - 15th July 2022
Comprehensive Validation Metrics and Precise Updating of Digital Twins of Production Systems
Overbeck, L.; Louarn, A. Le; Brützel, O.; Stricker, N.; Lanza, G.
2022. Simulation Notes Europe, 32 (3), 135–142. doi:10.11128/sne.32.tn.10613
Explainable AI: A key driver for AI adoption, a mistaken concept or a practically irrelevant feature?
Dvorak, J.; Kopp, T.; Kinkel, S.; Lanza, G.
2022. 4. UR-AI Symposium an der HFU, Schwenningen, 19.10.2022, 88–97, Hochschule Furtwangen
Towards a universal manufacturing node: Requirements for a versatile, laser-based machine tool for highly adaptable manufacturing
Jarwitz, M.; Trauneckera, D.; Arnim, C. von; Müller, N.; Kramer, S.
2022. 12th CIRP Conference on Photonic Technologies [LANE 2022], 4-8 September 2022, Fürth, Germany, 111, 816–821. doi:10.1016/j.procir.2022.08.090
Tool wear development in gear skiving of different quenched and tempered steels
Sauer, F.; Schulze, V.; Arndt, T.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1331–1343, VDI Verlag
Greiferfinger für eine schnelle Rekonfiguration
Friedmann, M.; Schabel, S.; Gerber, J.; Döhring, A.; Meschter, L.; Fleischer, J.; May, M.
2022. wt Werkstattstechnik online, 2022, 629–634
Simulation-based tool and process design for gear skiving with small axis crossing angles
Hilligardt, A.; Schulze, V.
2022. Aachen Conference on Gear Production, 9th-10th November 2022, Aachen, Forschungsvereinigung Antriebstechnik (FVA)
Scherschneiden von Elektroden für Li-Ionen-Zellen
Schabel, S.; Fleischer, J.
2022. wt Werkstattstechnik online, 112 (7-8), 487–491. doi:10.37544/1436–4980–2022–7–8–41
Stanz- und Biegetechnik - Chancenanalyse im Kontext der Automobilwirtschaft
Fleischer, J.; Heim, M.; Schabel, S.; Wirth, F.
2022
A new method for avoiding meshing interference in gear skiving
Hilligardt, A.; Klose, J.; Schulze, V.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1305–1317, VDI Verlag
Flexible Anbindung von Maschinen in der Produktion
Baranowski, M.; Scholz, J.; Friedmann, M.; Fleischer, J.
2022. VDI-Z, 164 (7-8), 76–78. doi:10.37544/0042-1766-2022-07-08
Development of a Digital Twin for Improved Ramp-Up Processes in the Context of Li-Ion-Battery-Cell-Stack-Formation
Husseini, K.; Schmidgruber, N.; Weinmann, H.; Maibaum, K.; Ruhland, J.; Fleischer, J.
2022. Procedia CIRP, 106, 27–32. doi:10.1016/j.procir.2022.02.150
Limitationen in der formatflexiblen Herstellung von Pouchfolie-Halbschalen
Schmidgruber, N.; Fleischer, J.
2022. KLIB Batterieforum2022, 19.01.-08.02.2022, Online, Kompetenznetzwerk Lithium-Ionen-Batterien (KLiB)
Investigation on a micro-environment concept for MEA production process supported by numerical simulations
Ma, L.; Zimmerer, N.; Schäfer, J.; Quarz, P.; Heckmann, T.; Scharfer, P.; Schabel, W.; Fleischer, J.
2022. FC³ - 2nd Fuel Cell Conference Chemnitz 2022 - Saubere Antriebe. Effizient Produziert. : Wissenschaftliche Beiträge und Präsentationen der zweiten Brennstoffzellenkonferenz am 31. Mai und 01. Juni 2022 in Chemnitz. Hrsg.: Thomas von Unwerth, Welf-Guntram Drossel, Universitätsverlag Chemnitz
Manufacturing Hybrid Ceramic Components by Combining CIM and VPP
Schubert, J.; End, Y.; Rosen, M.; Zanger, F.; Schulze, V.
2022. 5th International Conference on Hybrid Materials and Structures (2022), Leoben, Austria, July 20–22, 2022
Flexible and High-Precision Integration of Inserts by Combining Subtractive and Non-Planar Additive Manufacturing of Polymers
Springmann, M.; Matkovic, N.; Schäfer, A.; Waldhof, M.; Schlotthauer, T.; Friedmann, M.; Middendorf, P.; Fleischer, J.; Parspour, N.
2022. Key Engineering Materials Vol. 926, 926, 268–279. doi:10.4028/p-ed900k
Systematic Identification of Hazardous States and Approach for Condition Monitoring in the Context of Li-ion Battery Disassembly
Gerlitz, E.; Greifenstein, M.; Kaiser, J.-P.; Mayer, D.; Lanza, G.; Fleischer, J.
2022. Procedia CIRP, 107, 308–313. doi:10.1016/j.procir.2022.04.050
Hämmerndes Drehen: Hauptzeitparallele Zerspanung und mechanische Oberflächentexturierung
Schwalm, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2022. wt Werkstattstechnik online, 2022 (1), 22–27. doi:10.37544/1436-4980-2022-01-02-26
Development of a Semantic Database Model to Facilitate Data Analytics in Battery Cell Manufacturing
Yesilyurt, O.; Brandt, D.; Grimm, J.; Husseini, K.; Naumann, A.; Meiners, J.; Becker-Koch, D.
2022. Proceedings of the 11th International Conference on Data Science, Technology and Applications (DATA 2022). Ed.: A. Cuzzocrea, 13–20, SciTePress. doi:10.5220/0011139500003269
Applying Natural Language Processing in Manufacturing
May, M. C.; Neidhöfer, J.; Körner, T.; Schäfer, L.; Lanza, G.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 184–189. doi:10.1016/j.procir.2022.10.071
Shopfloor Management Acceptance in Global Manufacturing
Kandler, M.; Dierolf, L.; Bender, M.; Schäfer, L.; May, M. C.; Lanza, G.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 190–195. doi:10.1016/j.procir.2022.10.072
Image based control system for improving fiber injection molding process
Moll, P.; Xu, J.; Coutandin, S.; Fleischer, J.
2022. Procedia CIRP, 15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021, Ed.: R. Teti, 112, 430–435. doi:10.1016/j.procir.2022.09.032
Adaptive and Dynamic Feedback Loops between Production System and Production Network based on the Asset Administration Shell
Stamer, F.; Maier, S.; Peukert, S.; Lanza, G.
2022. Procedia CIRP, 15th CIRP Conference on Intelligent Computation in ManufacturingEngineering, 14-16 July 2021, Ed.: R. Teti, 112, 79–84. doi:10.1016/j.procir.2022.09.048
Generation of Artificial Learning Data to Train Functional Meta-Models of Micro Gears
Schiller, V.; Gauder, D.; Gölz, J.; Bott, A.; Wannenwetsch, M.; Lanza, G.
2022. Procedia CIRP, 114, 67–72. doi:10.1016/j.procir.2022.10.010
Analysis of the visually detectable wear progress on ball screws
Schlagenhauf, T.; Scheurenbrand, T.; Hofmann, D.; Krasnikow, O.
2022. doi:10.48550/arXiv.2205.01149
Industry 4.0-Oriented Turnkey Project: Rapid Configuration and Intelligent Operation of Manufacturing Systems
Xie, S.; Zhang, W.; Xue, F.; Li, D.; Liu, Y.; Fleischer, J.; Ehrmann, C.
2022. Machines, 10 (11), Art.-Nr.: 983. doi:10.3390/machines10110983
Additive-subtractive manufacturing of multi-material sensor-integrated electric machines using the example of the transversal flux machine
Baranowski, M.; Schubert, J.; Werkle, K. T.; Schoner, S.; Friedmann, M.; Stehle, T.; Fleischer, J.; Schulze, V.; Mohring, H.-C.
2022. IEEE 27th International Conference on Emerging Technologies and Factory Automation (ETFA), 1–4, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA52439.2022.9921711
Digitalization Platform for Sustainable Battery Cell Production: Coupling of Process, Production, and Product Models
Ventura Silva, G.; Thomitzek, M.; Lippke, M.; Heckmann, T.; Karaki, H.; Lischka, C.; Möhlen, F.; Mayer, D.; Hagemeister, J.; Daub, R.; Fleischer, J.; Nirschl, H.; Schröder, D.; Scharfer, P.; Schabel, W.; Kwade, A.; Herrmann, C.
2022. Energy Technology, 11 (5), Art.-Nr.: 2200801. doi:10.1002/ente.202200801
Exploring the Applicability of Sinterjoining to Combine Additively Manufactured Ceramic Components
Schubert, J.; End, Y.; Schulze, V.; Zanger, F.
2022. Procedia CIRP, 10th CIRP Global Web Conference – Material Aspects of Manufacturing Processes, 115, 18–23. doi:10.1016/j.procir.2022.10.043
Influence of initial powder layer thickness and focus deviation on the properties of hybrid manufactured parts by Laser Powder Bed Fusion
Lubkowitz, V.; Fischmann, P.; Schulze, V.; Zanger, F.
2022. 12TH CIRP CONFERENCE ON PHOTONIC TECHNOLOGIES (LANE 2022), 111, 87–91. doi:10.1016/j.procir.2022.08.136
Thermal Analysis of Novel Winding Structures for the Usage in Electrical Machines
Hoffmann, F.; Halwas, M.; Fleischer, J.; Doppelbauer, M.
2022. Conference Proceedings: 2022 International Conference on Electrical Machines (ICEM), 490–495, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910869
Improvement of the Mechanical Strength of High Speed Synchronous Reluctance Machines by Fiber Reinforced Support Structures
Gong, Y.; Heim, M.; Waldhof, M.; Wößner, W.; Fischer, J.; Parspour, N.; Fleischer, J.
2022. Conference Proceedings: 2022 International Conference on Electrical Machines (ICEM), 49–55, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM51905.2022.9910716
Konzept zur Erhöhung der Fertigungsgenauigkeit durch Kraftkompensation : Drehen mit dem Roboter und mehreren Werkzeugen [Turning with a robot and several tools]
Arndt, T.; Bertram, T.; Bryg, M.; Kipfmüller, M.; Kotschenreuther, J.; Schulze, V.
2022. wt Werkstattstechnik online, 112 (10), 722–726. doi:10.37544/1436-4980-2022-10-92
Investigation of the Forming Behavior of Copper Wires for the Compaction of Windings for Electric Machines
Halwas, M.; Wirth, F.; Fleischer, J.
2022. Key Engineering Materials, 926, 1809–1818. doi:10.4028/p-hhpr62
Uncertainty determination of a novel single flank rolling test facility for micro spur gears
Gauder, D.; Gölz, J.; Hornung, N.; Lanza, G.
2022. CIRP Journal of Manufacturing Science and Technology, 39, 332–344. doi:10.1016/j.cirpj.2022.08.014
Model‐Based Optimization of Web Tension Control for the Flexible Cell Stack Assembly of Lithium‐Ion Battery Cells
Husseini, K.; Schmidgruber, N.; Henschel, S.; Mayer, D.; Fleischer, J.
2022. Energy Technology, 11 (5), Art.-Nr.: 2200679. doi:10.1002/ente.202200679
Modularer Baukasten für die Erstellung anwendungsspezifischer Greiffinger: Greiferfinger für eine schnelle Rekonfiguration
Friedmann, M.; Schabel, S.; Gerber, J.; Döhring, A.; Meschter, L.; Fleischer, J.; May, M.
2022. wt Werkstattstechnik online, 112 (09), 629–634. doi:10.37544/1436-4980-2022-09-101
Autonomous visual detection of defects from battery electrode manufacturing
Choudhary, N.; Clever, H.; Ludwigs, R.; Rath, M.; Gannouni, A.; Schmetz, A.; Hülsmann, T.; Sawodny, J.; Fischer, L.; Kampker, A.; Fleischer, J.; Stein, H. S.
2022. American Chemical Society (ACS). doi:10.26434/chemrxiv-2022-pvwj3
Towards narrowing the reality gap in electromechanical systems: error modeling in virtual commissioning
Kuhn, A. M.; May, M. C.; Liu, Y.; Kuhnle, A.; Tekouo, W.; Lanza, G.
2022. Production Engineering, 17 (3-4), 739–752. doi:10.1007/s11740-022-01160-9
Hybrid Monte Carlo tree search based multi-objective scheduling
Hofmann, C.; Liu, X.; May, M.; Lanza, G.
2022. Production Engineering, 17, 133–144. doi:10.1007/s11740-022-01152-9
Deep Learning for the Detection of Car Flap States
Guérand, B.; Scheer, F.; Demetgül, M.; Fleischer, J.
2022. Journal of WSCG, 2022, 142–151. doi:10.24132/CSRN.3201.18
Product allocation and network configuration in global production networks – An integrated optimization approach
Klenk, F.; Kerndl, F.; Heidinger, F.; Benfer, M.; Peukert, S.; Lanza, G.
2022. Production Engineering, 17 (1), 117–132. doi:10.1007/s11740-022-01149-4
Digitale Transformation in global produzierenden Unternehmen = Digital Transformation in global manufacturing companies
Steier, G.; Schäfer, L.; Moser, S.; Kandler, M.; Lanza, G.
2022. WT Werkstattstechnik, 112 (5), 314–319. doi:10.37544/1436–4980–2022–5–44
Secure Clamping of Parts for Disassembly for Remanufacturing
Rieß, S.; Wiedemann, J.; Coutandin, S.; Fleischer, J.
2022. Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Ed.: T. Schüppstuhl, 79–87, Springer International Publishing. doi:10.1007/978-3-030-74032-0_7
KI-Assistenzsysteme in der Produktentwicklung
Schäfer, L.; Krahe, C.
2022. Potentiale digitaler Führung und Technologien für die Teaminteraktion von morgen : Zwischenbericht des vom BMBF geförderten Forschungs- und Entwicklungsprojektes im Rahmen des Programms. Hrsg.: G. Lanza, 68 – 74, TEWISS Verl
Automated Derivation of Optimal Production Sequences from Product Data
Schäfer, L.; Frank, A.; May, M. C.; Lanza, G.
2022. Procedia CIRP, 107, 469–474. doi:10.1016/j.procir.2022.05.010
A Circular Economy Strategy Selection Approach: Component-based Strategy Assignment using the Example of Electric Motors
Benfer, M.; Gartner, P.; Klenk, F.; Wallner, C.; Jaspers, M.-C.; Peukert, S.; Lanza, G.
2022. Proceedings of the Conference on Production Systems and Logistics : CPSL 2022, 17th May 2022 – 20th May 2022 University of British Columbia Vancouver, Canada. Ed.: D. Herberger, 22–31, publish-Ing. doi:10.15488/12133
Selection of traceability-based, automated decision-making methods in global production networks
Fessenmayr, F.; Benfer, M.; Gartner, P.; Lanza, G.
2022. Procedia CIRP, 107, 1349–1354. doi:10.1016/j.procir.2022.05.156
Influence of workpiece orientation for multimaterial measurements in dimensional computed tomography
Höger, K.; Schild, L.; Lanza, G.
2022. The e-journal of nondestructive testing & ultrasonics, 27 (03), Art.-Nr. 26582
Misalignment Detection on Linear Feed Axis with FFT and Statistical Analysis using Motor Current
Demetgül, M.; Gu, M.; Jonas, H.; Zhao, Y.; Gönnheimer, P.; Fleischer, J.
2022. Journal of Machine Engineering, 22 (2), 31–42. doi:10.36897/jme/147699
Product-Production-CoDesign: An Approach on Integrated Product and Production Engineering Across Generations and Life Cycles
Albers, A.; Lanza, G.; Klippert, M.; Schäfer, L.; Frey, A.; Hellweg, F.; Müller-Welt, P.; Schöck, M.; Krahe, C.; Nowoseltschenko, K.; Rapp, S.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 167–172, Elsevier. doi:10.1016/j.procir.2022.05.231
SyProLei - A systematic product development process to exploit lightweight potentials while considering costs and CO2 emissions
Kaspar, J.; König, K.; Scholz, J.; Quirin, S.; Kleiner, S.; Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 520–525, Elsevier. doi:10.1016/j.procir.2022.05.288
AI based geometric similarity search supporting component reuse in engineering design
Krahe, C.; Marinov, M.; Schmutz, T.; Hermann, Y.; Bonny, M.; May, M.; Lanza, G.
2022. 32nd CIRP Design Conference (CIRP Design 2022) - Design in a changing world. Ed.: N. Anwer, 275–280, Elsevier. doi:10.1016/j.procir.2022.05.249
MotorFactory: A Blender Add-on for Large Dataset Generation of Small Electric Motors
Wu, C.; Zhou, K.; Kaiser, J.-P.; Mitschke, N.; Klein, J.-F.; Pfrommer, J.; Beyerer, J.; Lanza, G.; Heizmann, M.; Furmans, K.
2022. Procedia CIRP, 106, 138–143. doi:10.1016/j.procir.2022.02.168
Dynamic Partial Reconfiguration for Adaptive Sensor Integration in Highly Flexible Manufacturing Systems
Schade, F.; Karle, C.; Mühlbeier, E.; Gönnheimer, P.; Fleischer, J.; Becker, J.
2022. Procedia CIRP, 107, 1311–1316. doi:10.1016/j.procir.2022.05.150
Web-based platform for planning and configuration of robot-based automation solutions: A retrospective view on the research project ROBOTOP
Schäffer, E.; Gönnheimer, P.; Kupzik, D.; Brossog, M.; Coutandin, S.; Franke, J.; Fleischer, J.
2022. Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021. Ed.: T. Schüppstuhl, 387–397, Springer International Publishing. doi:10.1007/978-3-030-74032-0_32
A Maturity Model for Smart Product-Service Systems
Heinz, D.; Benz, C.; Silbernagel, R.; Molins, B.; Satzger, G.; Lanza, G.
2022. Procedia CIRP, 107, 113–118. doi:10.1016/j.procir.2022.04.019
Functional Integration of Subcomponents for Hybridization of Fused Filament Fabrication
Baranowski, M.; Schlotthauer, T.; Netzer, M.; Gönnheimer, P.; Coutandin, S.; Fleischer, J.; Middendorf, P.
2022. International Journal of Mechanical Engineering and Robotics Research, 11 (5), 319–325. doi:10.18178/ijmerr.11.5.319-325
Determination of constitutive friction laws appropriate for simulation of cutting processes
Schulze, V.; Bleicher, F.; Courbon, C.; Gerstenmeyer, M.; Meier, L.; Philipp, J.; Rech, J.; Schneider, J.; Segebade, E.; Steininger, A.; Wegener, K.
2022. CIRP Journal of Manufacturing Science and Technology, 38, 139–158. doi:10.1016/j.cirpj.2022.04.008
Process Combination of VPP-LED and Vacuum Die Casting for Producing Complex Ceramic 3D-MID
Schubert, J.; Weisser, P.; Rosen, M.; Zanger, F.; Schulze, V.
2022. Chemie-Ingenieur-Technik, 94 (7), 967–974. doi:10.1002/cite.202100208
Blazed grating enables highly decoupled optically variable devices fabricated by vibration-assisted diamond texturing
Wang, J.; Wang, Y.; Zhang, J.; Schulze, V.; Guo, P.
2022. Optics Express, 30 (6), 8829–8846. doi:10.1364/OE.450628
Hybrid material additive manufacturing: interlocking interfaces for fused filament fabrication on laser powder bed fusion substrates
Englert, L.; Heuer, A.; Engelskirchen, M. K.; Frölich, F.; Dietrich, S.; Liebig, W. V.; Kärger, L.; Schulze, V.
2022. Virtual and Physical Prototyping, 17 (3), 508–527. doi:10.1080/17452759.2022.2048228
Ontology-Based Production Simulation with OntologySim
May, M. C.; Kiefer, L.; Kuhnle, A.; Lanza, G.
2022. Applied Sciences (Switzerland), 12 (3), Art.-Nr.: 1608. doi:10.3390/app12031608
In-process acoustic pore detection in milling using deep learning
Gauder, D.; Biehler, M.; Gölz, J.; Schulze, V.; Lanza, G.
2022. CIRP Journal of Manufacturing Science and Technology, 37, 125–133. doi:10.1016/j.cirpj.2022.01.008
Modelling and condition-based control of a flexible and hybrid disassembly system with manual and autonomous workstations using reinforcement learning
Wurster, M.; Michel, M.; May, M. C.; Kuhnle, A.; Stricker, N.; Lanza, G.
2022. Journal of Intelligent Manufacturing, 33 (2), 575–591. doi:10.1007/s10845-021-01863-3
Manufacturing Genome: A Foundation for Symbiotic, Highly Iterative Product and Production Adaptations
Gartner, P.; Jacob, A.; Akay, H.; Löffler, J.; Gammack, J.; Lanza, G.; Kim, S.-G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 35–46, Springer. doi:10.1007/978-3-030-90700-6_3
Development of a Human-Centered Implementation Strategy for Industry 4.0 Exemplified by Digital Shopfloor Management
Kandler, M.; May, M. C.; Kurtz, J.; Kuhnle, A.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 738–745, Springer. doi:10.1007/978-3-030-90700-6_84
Adaptive Manufacturing Based on Active Sampling for Multi-component Individual Assembly
Frey, A. M.; Lanza, G.
2022. B. T. D. L. M. S. S. N. K. N. A. K. S. Andersen A.-L. Andersen R. (Ed.), Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 372–380, Springer. doi:10.1007/978-3-030-90700-6_42
A Data-Driven Approach for Option-Specific Order Freeze Points in Mass-Customized Production
Dürr, S.; Silbernagel, R.; Bartsch, H.; Steier, G. L.; Huber, M. F.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 620–627, Springer. doi:10.1007/978-3-030-90700-6_70
Automated Production Network Planning Under Uncertainty by Developing Representative Demand Scenarios
Bruetzel, O.; Voelkle, D.; Overbeck, L.; Stricker, N.; Lanza, G.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems: Proceedings of the 8th Changeable, Agile, Reconfigurable and Virtual Production Conference (CARV2021) and the 10th World Mass Customization & Personalization Conference (MCPC2021), Aalborg, Denmark, October/November 2021. Ed.: A.-L. Andersen, 459–466, Springer. doi:10.1007/978-3-030-90700-6_52
Development of a Parallel Product-Production Co-design for an Agile Battery Cell Production System
Ruhland, J.; Storz, T.; Kößler, F.; Ebel, A.; Sawodny, J.; Hillenbrand, J.; Gönnheimer, P.; Overbeck, L.; Lanza, G.; Hagen, M.; Tübke, J.; Gandert, J.; Paarmann, S.; Wetzel, T.; Mohacsi, J.; Altvater, A.; Spiegel, S.; Klemens, J.; Scharfer, P.; Schabel, W.; Nowoseltschenko, K.; Müller-Welt, P.; Bause, K.; Albers, A.; Schall, D.; Grün, T.; Hiller, M.; Schmidt, A.; Weber, A.; Biasi, L. de; Ehrenberg, H.; Fleischer, J.
2022. Towards Sustainable Customization: Bridging Smart Products and Manufacturing Systems. Hrsg.: Ann-Louise Andersen, Rasmus Andersen, Thomas Ditlev Brunoe, Maria Stoettrup Schioenning Larsen, Kjeld Nielsen, Alessia Napoleone, Stefan Kjeldgaard, 96–104, Springer International Publishing. doi:10.1007/978-3-030-90700-6_10
Assembly techniques for proton exchange membrane fuel cell stack: A literature review
Song, K.; Wang, Y.; Ding, Y.; Xu, H.; Mueller-Welt, P.; Stuermlinger, T.; Bause, K.; Ehrmann, C.; Weinmann, H. W.; Schaefer, J.; Fleischer, J.; Zhu, K.; Weihard, F.; Trostmann, M.; Schwartze, M.; Albers, A.
2022. Renewable & sustainable energy reviews, 153, Art.-Nr.: 111777. doi:10.1016/j.rser.2021.111777
Approach for integrated product variant allocation and configuration adaption of global production networks featuring post-optimality analysis
Hochdörffer, J.; Klenk, F.; Fusen, T.; Häfner, B.; Lanza, G.
2022. International journal of production research, 60 (7), 2168–2192. doi:10.1080/00207543.2021.1884765
Torque-Time series
Mangold, S.; Gerlitz, E.; Zimprich, S.
2021, December 27. doi:10.5445/IR/1000141534
5G in der Industrie. Wege in die Technologieführerschaft in Produktentwicklung und Produktion
Albers, A.; Fleischer, J.; Gönnheimer, P.; Mühlbeier, E.; Schlagenhauf, T.; Wäschle, M.; Anderl, R.; Giese, T.; Wang, Y.; Aurich, J.; Glatt, M.; Litsche, S.; Steglich, S.
2021. acatech - Deutsche Akademie der Technikwissenschaften. doi:10.48669/aca_2021-2
Enhancement of Groove Turning Performance by Additively Manufactured Tool Holders with Internal Cooling Channels and Combined Cooling Strategies
Lubkowitz, V.; Reothia, N.; Zanger, F.
2021. New production technologies in aerospace industry : proceedings 2021 : MIC2021, 21st Machining Innovations Conference for Aerospace Industry :Hanover, December 1st and 2nd 2021. Ed.: Berend Denkena, 50–55, TEWISS Verlag. doi:10.2139/ssrn.3922719
Industrial machine tool component surface defect dataset
Schlagenhauf, T.; Landwehr, M.
2021. Data in Brief, 39, Art.-Nr. 107643. doi:10.1016/j.dib.2021.107643
Investigation of the mechanical behavior of electrodes after calendering and its influence on singulation and cell performance
Mayer, D.; Wurba, A.-K.; Bold, B.; Bernecker, J.; Smith, A.; Fleischer, J.
2021. Processes, 9 (11), Art.Nr. 2009. doi:10.3390/pr9112009
Additive manufacturing of continuous fibre-reinforced plastic components by a novel laser-sintering process
Baranowski, M.; Beichter, S.; Griener, M.; Coutandin, S.; Fleischer, J.
2021. Innovating towards perfection : SAMPE Europe Conference 2021 Baden/Zurich : Baden/Zurich, Switzerland and online, 29-30 September 2021, 21–26, Society for the Advancement of Material and Process Engineering (SAMPE)
Balancing the trade-off between measurement uncertainty and measurement time in optical metrology using design of experiments, meta-modelling and convex programming
Gauder, D.; Gölz, J.; Biehler, M.; Diener, M.; Lanza, G.
2021. CIRP journal of manufacturing science and technology, 35, 209–216. doi:10.1016/j.cirpj.2021.06.016
Influence of lpbf process parameters on milling of a maraging tool steel
Neuenfeldt, M.; Zanger, F.; Schulze, V.
2021. MM Science Journal, 2021 (November), 5030–5037. doi:10.17973/MMSJ.2021_11_2021148
Hybridization of Fused Filament Fabrication Components by Stereolithographic Manufactured Thermoset Inserts
Baranowski, M.; Schlotthauer, T.; Netzer, M.; Gönnheimer, P.; Coutandin, S.; Fleischer, J.; Middendorf, P.
2021. Recent Advances in Manufacturing Engineering and Processes : Proceedings of ICMEP 2021. Ed. by R. K. Agarwal, 3–14, Springer Singapur. doi:10.1007/978-981-16-3934-0_1
Modular and flexible Automation Middleware based on LabVIEW and OPC UA
Künzel, A.; Puchta, A.; Gönnheimer, P.; Fleischer, J.
2021. 9th Manufacturing Engineering Society International Conference (MESIC 2021) 23rd-25th June 2021, Gijόn, Spain, Art.Nr.: 012109, Institute of Physics Publishing Ltd (IOP Publishing Ltd)
A comprehensive KPI network for the performance measurement and management in global production networks
Verhaelen, B.; Mayer, F.; Peukert, S.; Lanza, G.
2021. Production engineering, 15 (5), 635 – 650. doi:10.1007/s11740-021-01041-7
Operations Research in International Manufacturing Networks
Benfer, M.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Ed.: T. Friedli, 219–231, Springer Nature Switzerland AG. doi:10.1007/978-3-030-72740-6_16
Autoconfiguration of a Vibration-Based Anomaly Detection System with Sparse a-priori Knowledge Using Autoencoder Networks
Hillenbrand, J.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 518–527, Springer Verlag. doi:10.1007/978-3-662-62138-7_52
Value Stream Kinematics
Mühlbeier, E.; Gönnheimer, P.; Hausmann, L.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 409–418, Springer Verlag. doi:10.1007/978-3-662-62138-7_41
Automated Identification of Parameters in Control Systems of Machine Tools
Gönnheimer, P.; Puchta, A.; Fleischer, J.
2021. B.-A. Behrens, A. Brosius, W. Hintze, S. Ihlenfeldt & J. P. Wulfsberg (Eds.), Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 568–577, Springer Verlag. doi:10.1007/978-3-662-62138-7_57
Fabrication of composite truss structures by combination of robotic filament winding and 3D printed adhesive elements
Florian, D.; Alec, R.; Jonas, N.; Marius, D.; Sven, C.; Daniel, M.; Sue, M.; Tim A., O.; Jürgen, F.
2021. Composites and Advanced Materials Expo (CAMX 2021) : Dallas, Texas, USA, 19th - 21st October 2021; Volume 2, 793 -, Curran
Working point determination of 3MA micromagnetic NDT-technique for production integrated detection of white layer during turning of AISI4140
Böttger, D.; Stampfer, B.; Gauder, D.; Lanza, G.; Schulze, V.; Straß, B.; Wolter, B.
2021. Procedia CIRP, 101, 9–12. doi:10.1016/j.procir.2021.02.002
A new approach for local cutting force modeling enabling the transfer between different milling conditions and tool geometries
Hilligardt, A.; Böhland, F.; Klose, J.; Gerstenmeyer, M.; Schulze, V.
2021. 18th CIRP Conference on Modeling of Machining Operations, 102, 138–143. doi:10.1016/j.procir.2021.09.024
Predictive Maintenance in der Antriebstechnik
Armbruster, J.; Gönnheimer, P.; Netzer, M.
2021, September
Schätzung der Segmentspanbildungsfrequenz mithilfe von Körperschallsignalen
Diaz Ocampo, D.; Gonzalez, G.; Zanger, F.; Heizmann, M.
2021. Technisches Messen, 88 (S1), S37–S41. doi:10.1515/teme-2021-0059
Leichtbau ganzheitlich denken
Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.; Scholz, J.; Kaspar, J.; Ruhland, P.; Coutandin, S.
2021. VDI-Z, 163 (07-08), 70–71. doi:10.37544/0042-1766-2021-07-08-70
Industrie 4.0 im Remanufacturing : Analyse und Bewertung aktueller Forschungsansätze
Sprenger, K.; Klein, J.-F.; Wurster, M.; Stricker, N.; Lanza, G.; Furmans, K.
2021. Industrie 4.0 Management, 2021 (4), 37–40. doi:10.30844/I40M_21-4_S37-40
Interfirm Collaboration in Global Production Networks – Maturity Model for Managing Interfirm Relationships
Silbernagel, R.; Gese, S.; Krupa, C.; Lanza, G.
2021. 28th EurOMA Conference, July 5 - 7, 2021. Book of Proceedings
Decision-making autonomy of production plants in global production networks – Analysis of the interplay between strategy and decisions [in press]
Verhaelen, B.; Lanza, G.
2021. 28th EurOMA Conference : 5 - 7 July 2021 : Online : Managing the "new normal": The future of Operations and Supply Chain Management in unprecedented times. Ed.: C. Blome, University of Sussex
Individuelle Knieimplantate wirtschaftlich fertigen
Schulze, V.; Lanza, G.; Zanger, F.; Gartner, P.; Fischmann, P.
2021, July
Flexibles, stückzahlskalierbares Stapeln von Brennstoffzellen unter Berücksichtigung vorangelagerter taktgebender Prozesse
Schäfer, J.; Fleischer, J.
2021. Future mobility : automatisiert - vernetzt - elektrisch : 21. September 2021, S. 9
Stirnradbearbeitung im Tauchgleitschleifen
Neuenfeldt, P.; Brennenstuhl, F.; Schulze, V.
2021. wt Werkstattstechnik online, 111 (07-08), 403–407. doi:10.37544/1436–4980–2021–06–47
Learning Factory Labs as Field-in-the-Lab Environments – An Experimental Concept for Human-Centred Production Research
Kandler, M.; Schäfer, L.; Gorny, P. M.; Ströhlein, K.; Lanza, G.; Nieken, P.
2021. Proceedings of the 11th Conference on Learning Factories (CLF)
Evaluation of a Hypervisor-Based Smart Controller for Industry 4.0 Functions in Manufacturing
Schade, F.; Barton, D.; Fleischer, J.; Becker, J.
2021. 7th IEEE World Forum on Internet of Things (WF-IoT), 680–685, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/WF-IoT51360.2021.9595534
Image segmentation and robust edge detection for collision avoidance in machine tools
Barton, D.; Hess, F.; Männle, P.; Odendahl, S.; Stautner, M.; Fleischer, J.
2021. Technisches Messen, 88 (6), 374–385. doi:10.1515/teme-2021-0028
Self-reference dispersion correction for chromatic confocal displacement measurement
Bai, J.; Li, X.; Wang, X.; Wang, J.; Ni, K.; Zhou, Q.
2021. Optics and lasers in engineering, 140, Art.Nr. 106540. doi:10.1016/j.optlaseng.2021.106540
Entwicklung eines flexiblen Produktionssystems für Batteriezellen
Storz, T.; Schild, L.; Vogt, M.; Hofmann, J.; Fleischer, J.; Lanza, G.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2021 (4), 247–253. doi:10.1515/zwf-2021-0049
Resilience Measures in Global Production Networks: A Literature Review and Conceptual Framework
Benfer, M.; Verhaelen, B.; Peukert, S.; Lanza, G.
2021. Die Unternehmung, 75 (4), 491–520. doi:10.5771/0042-059X-2021-4-491
Agile Produktion elektrischer Traktionsmotoren als Antwort auf volatile Märkte und Technologien
Fleischer, J.; Pfund, T.; Wirth, F.; Fraider, F.; Halwas, M.; Hausmann, L.; Wößner, W.
2021. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2021 (3), 128–132. doi:10.1515/zwf-2021-0025
Efficient Qualification Strategy of New Steel Alloys for Laser Powder Bed Fusion
Graf, G.; Neuenfeldt, M.; Müller, T.; Fischer-Bühner, J.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2021. Advanced Materials Research, 2021 (1161), 27–36. doi:https://doi.org/10.4028/www.scientific.net/AMR.1161.27
Kompaktwickelprozess zur Herstellung verteilter Wicklungen
Halwas, M.; Wirth, F.; Fleischer, J.
2021. ZWF, 2021 (3), 124–127. doi:10.1515/zwf-2021-0024
Vom Handwerk zur individualisierten Serienfertigung – Schwerpunkt adaptive Modulbauweisen mit Fließfertigungsmethoden
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.
2021. Bautechnik, 98 (3), 243–256. doi:10.1002/bate.202000110
Fiber orientation measurement of fiber injection molded nonwovens by image analysis
Moll, P.; Wang, S.; Coutandin, S.; Fleischer, J.
2021. Textile research journal, 91 (5-6), 664–680. doi:10.1177/0040517520948903
Eine automatisierungsgerechte robuste Produktionsplanung : Robustheit der Planung im Netzwerk unter Auftragsunsicherheit = Robust Production Planning Suitable for Automation
Brützel, O.; Küppers, F.; Overbeck, L.; Stricker, N.; Verhaelen, B.; Lanza, G.
2021. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (1-2), 44–48. doi:10.1515/zwf-2021-0009
Industrial Machine Tool Element Surface Defect Dataset
Schlagenhauf, T.; Landwehr, M.; Fleischer, J.
2021, February 11. doi:10.5445/IR/1000129520
Decentralized Multi-Agent Production Control through Economic Model Bidding for Matrix Production Systems
May, M. C.; Kiefer, L.; Kuhnle, A.; Stricker, N.; Lanza, G.
2021. Procedia CIRP, 96, 3–8. doi:10.1016/j.procir.2021.01.043
Wear-resistive thin-film sensors on cutting tools for in-process temperature measurement
Plogmeyer, M.; González, G.; Biehl, S.; Schulze, V.; Bräuer, G.
2021. Procedia CIRP, 2021, 85–88. doi:10.1016/j.procir.2021.02.011
Additives Roboter-Extrusions-System
Matkovic, N.; Götz, M.; Kupzik, D.; Nieschlag, J.; Coutandin, S.; Fleischer, J.
2021. VDI-Z, 163 (01-02), 55–57. doi:10.37544/0042-1766-2021-01-02-55
Flexibilitätsoptimale Austaktung der Fließmontage
Hofmann, C.; Schoof, J.; Kuhnle, A.; Lanza, G.
2021. wt Werkstattstechnik online, 2021, 260–264. doi:10.37544/1436–4980–2021–04–82
Hocheffiziente Fertigungsmodule für Li-Ion Zellen mit hochpräzisen Presseneinheiten
Schmidgruber, N.; Fleischer, J.; Hofmann, J.
2021. KLIB Batterieforum2021, 20 January 2021 - 09 February 2021,Virtual, Kompetenznetzwerk Lithium-Ionen-Batterien e. V. (KLIB)
3D-Druck für die Mobilität von morgen : Additiv-subtraktiver Prozess mit Inline-Prozessregelung für hochfunktionale Kunststoffbauteile
Baranowski, M.; Matkovic, N.; Friedmann, M.; Fleischer, J.
2021. wt Werkstattstechnik online, 111 (11-12), 807–811. doi:10.37544/1436-4980-2021-11-12-37
Leitfaden Antriebstechnik 4.0: Digitalisierungstrends für Produkt, Produktion und Lieferkette
Fleischer, J.; Lanza, G.; Wirth, F.; Gönnheimer, P.; Peukert, S.; May, M.; Hausmann, L.; Fraider, F.; Netzer, M.; Oexle, F.; Silbernagel, R.; Overbeck, L.
2021. VDMA Antriebstechnik
Product-Mix Allocation
Klenk, F.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management – From Excellent Plants Toward Network Optimization. Ed.: T. Friedli, 129–141, Springer International Publishing. doi:10.1007/978-3-030-72740-6_9
Intrinsische Hybridverbunde für Leichtbautragstrukturen – Grundlagen der Fertigung, Charakterisierung und Auslegung
Gude, M.; Barfuß, D.; Coutandin, S.; Fleischer, J.; Grützner, R.; Hirsch, F.; Kästner, M.; Müller-Pabel, M.; Müller, R.; Nieschlag, J.; Ruhland, P.; Würfel, V.
2021. Intrinsische Hybridverbunde für Leichtbautragstrukturen, Springer Verlag. doi:10.1007/978-3-662-62833-1
Experimental Parameter Identification for the Bending Based Preforming of Thermoplastic UD -tape
Kupzik, D.; Bachtin, A.; Coutandin, S.; Fleischer, J.
2021. (K. Dröder & T. Vietor, Eds.), Springer Verlag. doi:10.1007/978-3-662-62924-6
Flexible Mass Customisation - Proceedings of the 8th CIRP Global Web Conference
Kellens, K.; Ferraris, E.; Demeester, E. (Eds.)
2021. Elsevier B.V
Towards a User Support System for Computed Tomography Measurements Using Machine Learning
Katja, H.; Louis, S.; Leonard, S.; Gisela, L.
2021. Production at the Leading Edge of Technology. WGP 2021. Lecture Notes in Production Engineering, 506–514, Springer. doi:10.1007/978-3-030-78424-9_56
Learning Factory Labs as Field-in-the-Lab Environments
Kandler, M.; Louis, S.; M., G. P.; Karoline, S.; Gisela, L.; Petra, N.
2021. 11th Conference on Learning Factories, CLF2021, SSRN
Queue Length Forecasting in Complex Manufacturing Job Shops
May, M. C.; Albers, A.; Fischer, M. D.; Mayerhofer, F.; Schäfer, L.; Lanza, G.
2021. Forecasting, 2021 (2), 322–338. doi:10.3390/forecast3020021
Site Selection Processes in Global Production Networks
Verhaelen, B.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Ed.: T. Friedli, 101–115, Springer. doi:10.1007/978-3-030-72740-6_7
Global Manufacturing Management : From Excellent Plants Toward Network Optimization
Friedli, T.; Lanza, G.; Remling, D. (Eds.)
2021. Springer Nature Switzerland AG. doi:10.1007/978-3-030-72740-6
Process Quality Improvements in Global Production Networks
Silbernagel, R.; Arndt, T.; Peukert, S.; Lanza, G.
2021. Global Manufacturing Management. Management for Professionals. Ed.: T. Friedli, 167–177, Springer. doi:10.1007/978-3-030-72740-6_12
An integrated approach for developing production strategy and digital business model in global production
Steier, G. L.; Peukert, S.; Lanza, G.
2021. Production at the Leading Edge of Technology. Proceedings of the 11th Congress of the German Academic Association for Production Technology (WGP), Dresden, September 2021. Ed.: B.-A. Behrens, 666–674, Springer. doi:10.1007/978-3-030-78424-9_73
Continuous Validation and Updating for High Accuracy of Digital Twins of Production Systems
Overbeck, L.; Le Louarn, A.; Brützel, O.; Stricker, N.; Lanza, G.
2021. Simulation in Produktion und Logistik 2021, Erlangen, 15.-17.September 2021. Hrsg.: J. Franke, 609–617, Cuvillier Verlag
Challenges and Potential Solutions for Reduced Unbalance of Permanent Magnet Rotors for Electric Traction Motors
Wößner, W.; Heim, M.; Walter, M.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684227
Metamodeling of Numerical Simulations for Optimization of Hairpin Bending Processes
Wirth, F.; Hausmann, L.; Eppler, A.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684203
Influence of Wire Layer Structures on the Thermal Behavior in Electrical Machine Slots
Halwas, M.; Hoffmann, F.; Bader, P.; Heyde, T.; Doppelbauer, M.; Fleischer, J.
2021. 2021 11th International Online Conference Electric Drives Produktion Conference (E|DPC): 7, 8 and 9 December 2021 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC53547.2021.9684217
Recommender Systems for Capability Matchmaking
Badewitz, W.; Stamer, F.; Linzbach, J.; Dann, D.; Weinhardt, C.; Lichtenberger, S.
2021. 2021 IEEE 23rd Conference on Business Informatics: CBI 2021 ; Virtual Conference, 1–3 September 2021 ; Volume 2 – CBI Forum and Workshop Papers. Ed.: J. P. A. Almeida, 87–96, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CBI52690.2021.10059
Towards Ontology-based Autonomous Intralogistics for Agile Remanufacturing Production Systems
Klein, J.-F.; Wurster, M.; Stricker, N.; Lanza, G.; Furmans, K.
2021. Proceedings 2021 26th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA): Västerås, Sweden – Online , 07-10 September, 2021, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ETFA45728.2021.9613486
Modelling of the temperature distribution of spot-weldable composite/metal joints
Roth, S.; Nieschlag, J.; Mehner, M.; Coutandin, S.; Fleischer, J.
2021. Journal of Advanced Joining Processes, 4, Art.-Nr.: 100066. doi:10.1016/j.jajp.2021.100066
Wertstromkinematik – Produktionssysteme neu gedacht: Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 2)
Kimmig, A.; Schöck, M.; Mühlbeier, E.; Oexle, F.; Fleischer, J.; Bönsch, J.; Ovtcharova, J.; Hahn, J.; Grunwald, A.; Albers, A.; Rapp, S.; Hagenmeyer, V.; Scholz, S. G.; Schmidt, A.; Müller, T.; Becker, J.; Schade, F.; Beyerer, J.; Rehak, J.; Zwick, T.; Pauli, M.; Nuß, B.; Lanza, G.; Schild, L.; Overbeck, L.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (12), 935–939. doi:10.1515/zwf-2021-0207
Material parameter optimization for orthogonal cutting simulations of AISI4140 at various tempering conditions
Stampfer, B.; González, G.; Segebade, E.; Gerstenmeyer, M.; Schulze, V.
2021. 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, June 15-17, 2021. Ed.: E. Govekar, 198–203, Elsevier. doi:10.1016/j.procir.2021.09.034
Chip segmentation frequency based strategy for tool condition monitoring during turning of Ti-6Al-4V
González, G.; Schwär, D.; Segebade, E.; Heizmann, M.; Zanger, F.
2021. 18th CIRP Conference on Modeling of Machining Operations (CMMO), Ljubljana, Slovenia, June 15-17, 2021. Ed.: E. Govekar, 276–280, Elsevier. doi:10.1016/j.procir.2021.09.047
Concept for modelling the influence of electrode corrugation after calendering on stacking accuracy in battery cell production
Mayer, D.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 744–749, Elsevier. doi:10.1016/j.procir.2021.11.125
Comprehensive machine data acquisition through intelligent parameter identification and assignment
Gönnheimer, P.; Karle, A.; Mohr, L.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 720–725, Elsevier. doi:10.1016/j.procir.2021.11.121
A Framework for Digital Twins for Production Network Management
Benfer, M.; Peukert, S.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1269–1274, Elsevier. doi:10.1016/j.procir.2021.11.213
Continuous adaption through real data analysis turn simulation models into digital twins
Overbeck, L.; Brützel, O.; Teufel, M.; Stricker, N.; Kuhnle, A.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 98–103, Elsevier. doi:10.1016/j.procir.2021.11.017
Genetic algorithm for the optimization of vision acquisition for on-the-fly position measurement of individual layers in fuel cell stack assembly
Schäfer, J.; Allmendinger, S.; Hofmann, J.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1407–1411, Elsevier. doi:10.1016/j.procir.2021.11.237
Design and implementation of a holistic framework for data integration in industrial machine and sensor networks
Hillenbrand, J.; Gönnheimer, P.; Gerlitz, E.; Fleischer, J.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 1771–1776, Elsevier. doi:10.1016/j.procir.2021.11.298
Data-Based Supply Chain Collaboration - Improving Product Quality in Global Production Networks by Sharing Information
Silbernagel, R.; Wagner, C.; Albers, A.; Trapp, T.-U.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 470–475, Elsevier. doi:10.1016/j.procir.2021.11.079
Potentials of Traceability Systems - A Cross-Industry Perspective
Gartner, P.; Benfer, M.; Kuhnle, A.; Lanza, G.
2021. 54th CIRP CMS 2021 - Towards Digitalized Manufacturing 4.0. Ed.: D. Mourtzis, 987–992, Elsevier. doi:10.1016/j.procir.2021.11.166
Konzept eines systemischen Entwicklungsprozesses zur Hebung von Leichtbaupotenzialen = Concept of a Systemic Development Process to Realize Lightweight Potentials
Scholz, J.; Kaspar, J.; Quirin, S.; Kneidl, B.; Kleiner, S.; Friedmann, M.; Fleischer, J.; Herrmann, H.-G.; Vielhaber, M.
2021. ZWF Zeitschrift fuer Wirtschaftlichen Fabrikbetrieb, 116 (11), 797–800. doi:10.1515/zwf-2021-0182
Wertstromkinematik – Produktionssysteme neu gedacht – Interdisziplinäres Forscherteam arbeitet an der Produktionstechnik der Zukunft (Teil 1)
Mühlbeier, E.; Oexle, F.; Gönnheimer, P.; Fleischer, J.; Ye, X.; Hohmann, S.; Mamaev, I.; Bertram, T.; Bryg, M.; Kotschenreuther, J.; Kipfmüller, M.; Bremer, F.; Matthiesen, S.; Arndt, T.; Schulze, V.
2021. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 116 (11), 847–851. doi:10.1515/zwf-2021-0179
Pbf-lb process-induced regular cavities for lightweight alsi10mg structures
Lubkowitz, V.; Alber, J.; Zanger, F.
2021. Materials, 14 (21), 6665. doi:10.3390/ma14216665
Intelligent vision based wear forecasting on surfaces of machine tool elements
Schlagenhauf, T.; Burghardt, N.
2021. SN Applied Sciences, 3 (12), Art.-Nr. 858. doi:10.1007/s42452-021-04839-3
Experimental and numerical analysis of mold filling in rotational molding
Nieschlag, J.; Seuffert, J.; Strack, D.; Friedmann, M.; Kärger, L.; Henning, F.; Fleischer, J.
2021. Journal of Composites Science, 5 (11), 289. doi:10.3390/jcs5110289
Towards planning and control in cognitive factories - A generic model including learning effects and knowledge transfer across system entities
Wurster, M.; Exner, Y.; Kaiser, J.-P.; Stricker, N.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 158–163, Elsevier. doi:10.1016/j.procir.2021.10.025
Multi-variate time-series for time constraint adherence prediction in complex job shops
May, M. C.; Behnen, L.; Holzer, A.; Kuhnle, A.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 55–60, Elsevier. doi:10.1016/j.procir.2021.10.008
Framework for simulation-based Trajectory Planning and Execution of Robots equipped with a Laser Scanner for Measurement and Inspection
Kaiser, J.-P.; Becker, S. N.; Wurster, M.; Stricker, N.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 292–297, Elsevier. doi:10.1016/j.procir.2021.10.047
Reinforcement Learning Based Production Control of Semi-automated Manufacturing Systems
Overbeck, L.; Hugues, A.; May, M. C.; Kuhnle, A.; Lanza, G.
2021. 9th CIRP Global Web Conference – Sustainable, resilient, and agile manufacturing and service operations : Lessons from COVID-19. Ed.: K. Medini, 170–175, Elsevier. doi:10.1016/j.procir.2021.10.027
Seamless and modular architecture for autonomous machine tools
Fleischer, J.; Puchta, A.; Gönnheimer, P.
2021. Journal of Machine Engineering, 21 (3), 40–46. doi:10.36897/jme/141565
Configuration and optimization of migration planning in global production networks
Moser, E.; Verhaelen, B.; Haefner, B.; Lanza, G.
2021. CIRP Journal of Manufacturing Science and Technology, 35, 803–818. doi:10.1016/j.cirpj.2021.07.007
Numerical design of rotationally molded composite tie rods
Nieschlag, J.; Eisenhardt, P.; Coutandin, S.; Fleischer, J.
2021. Composite Structures, 278, Art.-Nr.: 114687. doi:10.1016/j.compstruct.2021.114687
The present state of surface conditioning in cutting and grinding
Stampfer, B.; González, G.; Gerstenmeyer, M.; Schulze, V.
2021. Journal of Manufacturing and Materials Processing, 5 (3), 92. doi:10.3390/JMMP5030092
Demand-supply matching through auctioning for the circular economy
Bodin, U.; Dhanrajani, S.; Abdalla, A. H.; Diani, M.; Klenk, F.; Colledani, M.; Palm, E.; Schelén, O.
2021. Procedia manufacturing, 54, 82–87. doi:10.1016/j.promfg.2021.07.013
Unsupervised detection of state changes during operation of machine elements
Hillenbrand, J.; Fleischer, J.
2021. Journal of Machine Engineering, 21 (2), 35–46. doi:10.36897/jme/136311
Improvement of the adhesion in functional NiTi wire/polymer composites made by additive manufacturing
Eyer, P.; Dittus, J.; Trauth, A.; Coutandin, S.; Fleischer, J.; Weidenmann, K. A.
2021. Composite Structures, 275, Art.-Nr.: 114455. doi:10.1016/j.compstruct.2021.114455
Dual-Laser PBF-LB Processing of a High-Performance Maraging Tool Steel FeNiCoMoVTiAl
Graf, G.; Nouri, N.; Dietrich, S.; Zanger, F.; Schulze, V.
2021. Materials, 14 (15), Art.-Nr.: 4251. doi:10.3390/ma14154251
A stitching algorithm for automated surface inspection of rotationally symmetric components
Schlagenhauf, T.; Brander, T.; Fleischer, J.
2021. CIRP Journal of Manufacturing Science and Technology, 35, 169–177. doi:10.1016/j.cirpj.2021.05.013
Foresighted digital twin for situational agent selection in production control
May, M. C.; Overbeck, L.; Wurster, M.; Kuhnle, A.; Lanza, G.
2021. Procedia CIRP, 99, 27–32. doi:10.1016/j.procir.2021.03.005
Data analytics for time constraint adherence prediction in a semiconductor manufacturing use-case
May, M. C.; Maucher, S.; Holzer, A.; Kuhnle, A.; Lanza, G.
2021. Procedia CIRP, 100, 49–54. doi:10.1016/j.procir.2021.05.008
Production-oriented design of electric traction drives with hairpin winding
Fleischer, J.; Hausmann, L.; Wirth, F.
2021. Procedia CIRP, 100, 169–174. doi:10.1016/j.procir.2021.05.080
Decision support for the implementation of Industry 4.0 methods: Toolbox, Assessment and Implementation Sequences for Industry 4.0
Liebrecht, C.; Kandler, M.; Lang, M.; Schaumann, S.; Stricker, N.; Wuest, T.; Lanza, G.
2021. Journal of manufacturing systems, 58, 412–430. doi:10.1016/j.jmsy.2020.12.008
Robust optimization of information flows in global production networks using multi-method simulation and surrogate modelling
Treber, S.; Benfer, M.; Häfner, B.; Wang, L.; Lanza, G.
2021. CIRP journal of manufacturing science and technology, 32, 491–506. doi:10.1016/j.cirpj.2020.08.012
Industrializing precast productions
Mark, P.; Lanza, G.; Lordick, D.; Albers, A.; König, M.; Borrmann, A.; Stempniewski, L.; Forman, P.; Frey, A. M.; Renz, R.; Manny, A.; Stindt, J.
2021. Civil engineering design, 3 (3), 87–98. doi:10.1002/cend.202100019
AI-Based knowledge extraction for automatic design proposals using design-related patterns
Krahe, C.; Kalaidov, M.; Doellken, M.; Gwosch, T.; Kuhnle, A.; Lanza, G.; Matthiesen, S.
2021. Procedia CIRP, 100, 397–402. doi:10.1016/j.procir.2021.05.093
Offline-online pattern recognition for enabling time series anomaly detection on older nc machine tools
Netzer, M.; Palenga, Y.; Goennheimer, P.; Fleischer, J.
2021. Journal of Machine Engineering, 21 (1), 98–108. doi:10.36897/jme/132248
Concepts and Requirements for Flexible Disassembly Systems for Drive Train Components of Electric Vehicles
Fleischer, J.; Gerlitz, E.; Rieß, S.; Coutandin, S.; Hofmann, J.
2021. The 28th CIRP Conference on Life Cycle Engineering, March 10 – 12, 2021, Jaipur, India. Ed.: K. S. Sangwan, 577–582, Elsevier. doi:10.1016/j.procir.2021.01.154
A novel intelligent fault diagnosis method of rolling bearing based on two-stream feature fusion convolutional neural network
Xue, F.; Zhang, W.; Xue, F.; Li, D.; Xie, S.; Fleischer, J.
2021. Measurement: Journal of the International Measurement Confederation, 176, Art.-Nr.: 109226. doi:10.1016/j.measurement.2021.109226
Methodology for the strategy-oriented distribution of decision autonomy in global production networks
Verhaelen, B.; Haefner, B.; Lanza, G.
2021. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 15–20, Elsevier. doi:10.1016/j.procir.2021.01.045
Performance analysis of the longitudinal-torsional ultrasonic milling of Ti-6Al-4V
Pang, Y.; Feng, P.; Wang, J.; Zha, H.; Xu, J.
2021. International Journal of Advanced Manufacturing Technology, 89. doi:10.1007/s00170-021-06682-7
Load-dependent path planning method for 3D printing of continuous fiber reinforced plastics
Wang, T.; Li, N.; Link, G.; Jelonnek, J.; Fleischer, J.; Dittus, J.; Kupzik, D.
2021. Composites / A, 140, Article: 106181. doi:10.1016/j.compositesa.2020.106181
Experimental determination of the cooling performance of liquid nitrogen for machining conditions
Golda, P.; Schießl, R.; Stampfer, B.; Schulze, V.; Maas, U.
2021. International journal of heat and mass transfer, 164, Art.-Nr.: 120588. doi:10.1016/j.ijheatmasstransfer.2020.120588
Investigation of Parameters Influencing the Producibility of Anodes for Sodium-Ion Battery Cells
Hofmann, J.; Wurba, A.-K.; Bold, B.; Maliha, S.; Schollmeyer, P.; Fleischer, J.; Klemens, J.; Scharfer, P.; Schabel, W.
2021. Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 171–181, Springer. doi:10.1007/978-3-662-62138-7_18
Microstructural and Chemical Constitution of the Oxide Scale formed on a Pesting-Resistant Mo-Si-Ti Alloy
Obert, S.; Kauffmann, A.; Seils, S.; Boll, T.; Kauffmann-Weiss, S.; Chen, H.; Anton, R.; Heilmaier, M.
2021. Corrosion science, 178, Art.-Nr. 109081. doi:10.1016/j.corsci.2020.109081
Concept for Predicting Vibrations in Machine Tools Using Machine Learning
Barton, D.; Fleischer, J.
2021. Production at the leading edge of technology – Proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Ed.: B.-A. Behrens, 549–558, Springer. doi:10.1007/978-3-662-62138-7_55
Designing an adaptive production control system using reinforcement learning
Kuhnle, A.; Kaiser, J.-P.; Theiß, F.; Stricker, N.; Lanza, G.
2021. Journal of intelligent manufacturing, 32, 855–876. doi:10.1007/s10845-020-01612-y
Chatter identification of thin-walled parts for intelligent manufacturing based on multi-signal processing
Li, D.-D.; Zhang, W.-M.; Li, Y.-S.; Xue, F.; Fleischer, J.
2021. Advances in manufacturing, 9, pages22–33. doi:10.1007/s40436-020-00299-x
Ausfallfrüherkennung von Ritzel-Zahnstangen-Trieben mittels Acoustic Emission. PhD dissertation
Ehrman, C.
2020, December 18. Shaker Verlag
Development and Implementation of a Compact Winding Process
Halwas, M.; Ambs, P.; Sell-Le Blanc, F.; Weiße, L.; Hofmann, J.; Fleischer, J.
2020. 10th International Electric Drives Production Conference (EDPC), Ludwigsburg, Germany, 08-09 December 2020, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388198
Surface conditioning in machining processes – Glossary of the DFG priority programme 2086
Schulze, V.; Zanger, F.; Stampfer, B.; Seewig, J.; Uebel, J.; Zabel, A.; Wolter, B.; Böttger, D.
2020. Technisches Messen, 87 (11), 661–673. doi:10.1515/teme-2020-0044
Optical process monitoring for Laser-Powder Bed Fusion (L-PBF)
Zouhri, W.; Dantan, J. Y.; Häfner, B.; Eschner, N.; Homri, L.; Lanza, G.; Theile, O.; Schäfer, M.
2020. CIRP journal of manufacturing science and technology, 31, 607–617. doi:10.1016/j.cirpj.2020.09.001
Surface conditioning in machining processes
Schulze, V.
2020. Technisches Messen, 87 (12), 743–744. doi:10.1515/teme-2020-0071
Extraction of surface image features for wear detection on ball screw drive spindles
Schlagenhauf, T.; Heinzler, M.; Fleischer, J.
2020. Forum Bildverarbeitung 2020. Ed.: T. Längle ; M. Heizmann, 305–316, KIT Scientific Publishing
Concept for collision avoidance in machine tools based on geometric simulation and sensor data
Barton, D.; Männle, P.; Odendahl, S.; Stautner, M.; Fleischer, J.
2020. Forum Bildverarbeitung 2020 Längle, Thomas [Hrsg.]; Heizmann, Michael [Hrsg.], 171–182, KIT Scientific Publishing
Cryogenic orthogonal turning of Ti-6Al-4V – Analysis of nitrogen supply pressure variation and subcooler usage
Stampfer, B.; Golda, P.; Schießl, R.; Maas, U.; Schulze, V.
2020. The international journal of advanced manufacturing technology, 111 (1-2), 359–369. doi:10.1007/s00170-020-06105-z
Demontageeffektor für Schraubverbindungen mit ungewissem Zustand – Systematische Entwicklung eines robotergeführten Schraubwerkzeugs für das Remanufacturing
Rieß, S.; Laub, J.; Coutandin, S.; Fleischer, J.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (10), 711–714. doi:10.3139/104.112401
Kreislaufwirtschaft in Produktionsnetzwerken : Parameter und Stellschrauben für die erfolgreiche Umsetzung nachhaltiger Produktionsprinzipien
Klenk, F.; Potarca, M.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (10), 668–672. doi:10.3139/104.112384
Werkstückerkennung mit Greifsystemen
Friedmann, M.; Köse, H.; Roth, S.; Wirth, B.; Coutandin, S.; Fleischer, J.
2020. Robotik und Produktion, 2020 (5), 32–33
Analyse von 3D-CT-Aufnahmen von Spänen zur Extrahierung der Segmentspanbildungsfrequenz
Schwär, D.; Kunz, A.; Dehen, S.; Zanger, F.; Puente León, F.
2020. Technisches Messen, 87 (s1), s22–s27. doi:10.1515/teme-2020-0039
Lasersintern mit Endlosfasern
Baranowski, M.; Moll, P.; Coutandin, S.; Fleischer, J.
2020, August 24
Industrie-4.0-Nachrüstkit für Werkzeugmaschinen: Modulare Lösung für zustandsorientierte Instandhaltung und Prozessüberwachung
Barton, D.; Stamm, R.; Mergler, S.; Bardenhagen, C.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7-8), 491–495
Detektion von frühzeitigen Oberflächenzerrüttungen
Schlagenhauf, T.; Ruppelt, P.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7/8), 501–506. doi:10.37544/1436-4980-2020-07-08-45
Detektion des Vorspannungsverlusts in Kugelgewindetrieben
Veith, M.; Zimmermann, A.; Hillenbrand, J.; Fleischer, J.
2020. wt Werkstattstechnik online, 110 (7/8), 485–490. doi:10.37544/1436-4980-2020-07-08-29
Prädiktiv-reaktives Scheduling zur Steigerung der Robustheit in der Matrix-Produktion. PhD dissertation
Echsler Minguillon, F.
2020, July 14. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000121163
Disturbance Force Estimation for a Low Pressure Suction Gripper Based on Differential Pressure Analysis
Wirth, B.; Coutandin, S.; Fleischer, J.
2020. Annals of Scientific Society for Assembly, Handling and Industrial Robotics. Ed.: T. Schüppenstuhl, 263–273, Springer Vieweg. doi:10.1007/978-3-662-61755-7
Erhöhung der Skalierbarkeit von KI-Anwendungen in Produktionsanlagen – durch intelligente Parameteridentifikation und Datensegmentierung
Gönnheimer, P.; Netzer, M.; Mohr, L.; Hörsten, G. von; Fleischer, J.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 517–519. doi:10.3139/104.112318
Influence of the process parameter of resistance spot welding and the geometry of weldable load introducing elements for FRP/metal joints on the heat input
Roth, S.; Hezler, A.; Pampus, O.; Coutandin, S.; Fleischer, J.
2020. Journal of Advanced Joining Processes, 2, Artkl.Nr.: 100032. doi:10.1016/j.jajp.2020.100032
Digitale Führung und Technologien für die Teaminteraktion von morgen: Entwicklung eines Leitbildes für Führung und Interaktion in der digitalisierten Arbeitswelt
Malessa, N.; Ast, J.; Kandler, M.; Ströhlein, K.; Nyhuis, P.; Lanza, G.; Nieken, P.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 540–544. doi:10.3139/104.112374
Reaktion auf Störungen globaler Produktionsanläufe : Methodik zur Erhöhung der Effizienz von Produktionsanläufen in globalen Produktionsnetzwerken
Verhaelen, B.; Kehm, F.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (7-8), 492–496. doi:10.3139/104.112377
Leitfaden Fit4E - Einstieg in die Produktionstechnik für die Elektromobilität
Fleischer, J.; Schäfer, J.; Wößner, W.; Hofmann, J.
2020
SLS-Prozess für endlosfaserverstärkte Kunststoffbauteile
Baranowski, M.; Moll, P.; Coutandin, S.; Fleischer; Jürgen
2020. VDI-Z Integrierte Produktion, (5)
Evaluation of fiber placement strategies for the implementation of continuous reinforcement fibers in selective laser sintering process
Moll, P.; Pirrung, F.; Baranowski, M.; Coutandin, S.; Fleischer, J.
2020. International SAMPE Conference and Exhibition 2020 : online, 1st June 2020, Volume 1, 71–84, Curran
Additive Manufacturing of Metal Components using the ARBURG freeformer System
Kupzik, D.; Spiller, Q.; Coutandin, S.; Fleischer, J.
2020. Holistic innovation in Additive Manufacturing
Thermal insulation and laser-based preheating method for processing a ledeburitic tool steel in LPBF
Graf, G.; Leoni, M.; Müller, T.; Fischer-Bühner, J.; Frey, M.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2020. Holistic innovation in Additive Manufacturing
Reinforcement learning for an intelligent and autonomous production control of complex job-shops under time constraints
Altenmüller, T.; Stüker, T.; Waschneck, B.; Kuhnle, A.; Lanza, G.
2020. Production engineering, 14 (3), 319–328. doi:10.1007/s11740-020-00967-8
Process model for the successful implementation and demonstration of SME-based industry 4.0 showcases in global production networks
Peukert, S.; Treber, S.; Balz, S.; Haefner, B.; Lanza, G.
2020. Production engineering, 14 (3), 275–288. doi:10.1007/s11740-020-00953-0
Implementierung von unternehmensübergreifender Traceability – Entwicklung, Implementierung und Bewertung von Traceability-Systemen entlang des gesamten Produktlebenszyklus
Benfer, M.; Gartner, P.; Treber, S.; Kuhnle, A.; Häfner, B.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (5), 304–308. doi:10.3139/104.112284
Proceedings of the Design Society: DESIGN Conference
The Design Society (Ed.)
2020. Cambridge University Press (CUP). doi:10.1017/dsd.2020.344
Qualitative Modelling in Embodiment Design - Investigating the Contact and Channel Approach Through Analysis of Projects
Grauberger, P.; Bremer, F.; Sturm, C.; Hoelz, K.; Wessels, H.; Gwosch, T.; Wagner, R.; Lanza, G.; Albers, A.; Matthiesen, S.
2020. Proceedings of the Design Society: DESIGN Conference, 1, 897–906. doi:10.1017/dsd.2020.260
Digitale Produktion und intelligente Steuerung
Marvin Carl May; Andreas Kuhnle; Gisela Lanza
2020. wt Werkstattstechnik online, 110 (4), 255–260
Direct Bundle Simulation approach for the compression molding process of Sheet Molding Compound
Meyer, N.; Schöttl, L.; Bretz, L.; Hrymak, A. N.; Kärger, L.
2020. Composites / A, 132, Article: 105809. doi:10.1016/j.compositesa.2020.105809
Transformation globaler Produktionsnetzwerke : Trends und Herausforderungen
Lanza, G.; Schuh, G.; Friedli, T.; Verhaelen, B.; Rodemann, N.; Remling, D.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 196–199. doi:10.3139/104.112262
Investigations on intrinsically manufactured FRP/metal composites - from embedded inserts to load-bearing hybrid structures
Bernath, A.; Seuffert, J.; Muth, M.; Roth, S.; Fleischer, J.; Weidenmann, K. A.; Henning, F.
2020, April 29. 4th International Conference Hybrid - Materials and Structures (2020), Online, April 28–29, 2020
Digitaler Zwilling des Produktionssystems : Lernende, adaptive Ablaufsimulation für größtmögliche Realitätsnähe
Overbeck, L.; Brützel, O.; Stricker, N.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (Special), 62–65. doi:10.3139/104.112326
Investigation of automated nibbling as an alternative cutting technology for machining of fiber-reinforced polymers
Langer, J.; Gerstenmeyer, M.; Schulze, V.
2020. Hybrid 2020 Materials and Structures : 4th International Conference, 28 – 29 April 2020 Web-Conference, Germany, Proceedings. Ed.: J. M. Hausmann, 261–267
Fibre-metal elastomer laminates ? Lightweight components with superior damping characteristics
Rothaupt, B.; Roth, S.; Yu, L.; Fleischer, J.
2020. JEC Composites Magazine, 27, 151–153
Batteriezellenfertigung vom Coil zum Stack: Integriert, automatisiert und dadurch hoch flexibel
Weinmann, H. W.; Eichelkraut, M.; Woke da Silva, L.; Fleischer, J.
2020. C2 Coating & Converting, (4), 21–24
Coil2Stack: Ein innovatives Verfahren zur formatflexiblen Batteriezellherstellung
Weinmann, H. W.; Töpper, H.-C.; Fleischer, J.
2020. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (4), 241–243. doi:10.3139/104.112192
Digitales, agiles Management auf dem Shopfloor – Entwicklung eines Ansatzes zur Neugestaltung der Managementsysteme in der Produktion
Kandler, M.; Kurtz, J. J.; Stricker, N.; Lanza, G.
2020. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 115 (1-2), 23–26. doi:10.3139/104.112241
Skalierbarkeit von KI-Anwendungen in der Produktion
wbk Institut für Produktionstechnik des KIT; Netzer, M.; Gönnheimer, P.; Michelberger, J.; Fleischer, J.
2020. Fabriksoftware, 2020 (1), 51–54. doi:10.30844/FS20-1_51-54
Autonomeous production control for matrix production based on deep Q-learning
Hofmann, C.; Krahe, C.; Stricker, N.; Lanza, G.
2020. Procedia CIRP, 88, 25–30. doi:10.1016/j.procir.2020.05.005
Evaluation of flexible cell assembly processes on novel, flexible production equipment
Storz, T.; Fleischer, J.
2020. International Battery Production Conference, Conference Brochure, 2.11.-4.11.202, Virtual, 57, Karlsruher Institut für Technologie (KIT)
Production and Tensile Testing of Rotationally Molded Hybrid Composite Tie Rods
Nieschlag, J.; Coutandin, S.; Fleischer, J.
2020. International SAMPE Conference and Exhibition 2020 : online, 1st June 2020, Volume 2, 1008–1018, Curran
5th CIRP Conference on Surface Integrity (CSI 2020)
Arrazola, P. J.; Madariaga, A. (Eds.)
2020
Comparison of anomaly detection capabilities of pulse phase thermography in transmission and reflection setup on Sheet Molding Compound
Bretz, L.; Wilke, M.; Häfner, B.; Lanza, G.
2020. Proceedings : 4th International Conference, Hybrid 2020, Materials and Structures, 28 - 29 April 2020, Web Conference, Germany. Ed.: J. M. Hausmann, 108–115, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Design and quality assurance of intrinsic hybrid metal-CFRP lightweight structures
Bretz, L.; Günther, F.; Jost, H.; Schwarz, M.; Kretzschmar, V.; Pohl, M.; Weiser, L.; Häfner, B.; Summa, J.; Herrmann, H.-G.; Stommel, M.; Lanza, G.
2020. Proceedings : 4th International Conference, Hybrid 2020, Materials and Structures, 28 - 29 April 2020, Web Conference, Germany. Ed.: J. M. Hausmann, 144–159, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
10th Conference on Industrial Computed Tomography (iCT) 2020, 4-7 Feb, Wels, Austria
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2020. NDT.net
Proceedings : 4th International Conference Hybrid 2020 Materials and Structures 28 – 29 April 2020 Web-Conference, Germany
Hausmann, J. M.; Siebert, M.; Hehl, A. von; Weidenmann, K. A.
2020. Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Development of a Human-centered Industry 4.0 Philosophy
Kandler, M.; Lanza, G.; Krahe, C.
2020. M. Liewald (Ed.), New Developments in Sheet Metal Forming (NEBU 2020) Hrsg.: Liewald, Mathias, 123–135, Institute for Metal Forming Technology of University of Stuttgart
Pattern Recognition in Multivariate Time Series: Towards an Automated Event Detection Method for Smart Manufacturing Systems
Kapp, V.; May, M. C.; Lanza, G.; Wuest, T.
2020. Journal of Manufacturing and Materials Processing, 4 (3), 88. doi:10.3390/jmmp4030088
New Developments in Sheet Metal Forming (NEBU 2020)
Liewald, M. (Ed.)
2020. Universität Stuttgart
Development of an acoustic process monitoring system for selective laser melting (SLM)
Eschner, N.; Weiser, L.; Haefner, B.; Lanza, G.
2020. Solid Freeform Fabrication 2018: Proceedings of the 29th Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference. Ed.: Laboratory for Freeform Fabrication, University of Texas at Austin, 2097–2117, Elsevier
Influence of different mounting strategies on the random measurement error in industrial computed tomography
Schild, L.; Jung, M.; Häfner, B.; Lanza, G.
2020. 10th Conference on Industrial Computed Tomography (iCT) 2020, 4-7 Feb, Wels, Austria, 1–8
Analysis of Basis Weight Uniformity Indexes for the Evaluation of Fiber Injection Molded Nonwoven Preforms
Moll, P.; Wang, S.; Coutandin, S.; Fleischer, J.
2020. AUTEX research journal, 21 (3), 341–351. doi:10.2478/aut-2020-0039
Local foliation of manifolds by surfaces of willmore type
Lamm, T.; Metzger, J.; Schulze, F.
2020. Annales de l’Institut Fourier, 70 (4), 1639–1662. doi:10.5802/AIF.3375
Development of an alternative Round Wire Process Chain: Automated Trickle Winding
Sell-Le Blanc, F.; Weise, L.; Klusmann, B.; Luttge, W.; Dunker, A.; Lindhorst, N.; Halwas, M.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388202
Review and Enhancements of Rotor Designs for High Speed Synchronous Reluctance Machines
Hausmann, L.; Waldhof, M.; Fischer, J.; Wößner, W.; Oliveira Flammer, M.; Heim, M.; Fleischer, J.; Parspour, N.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388205
New Production Techniques for Electric Motors in High Performance Lightweight Applications
Ruhland, P.; Matveev, A.; Nielsen, K.; Kvinnesland, K.; Coutandin, S.; Fleischer, J.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388183
Opportunities of Model-Based Production-Oriented Design of Stators with Hairpin Winding
Hausmann, L.; Wirth, F.; Fleischer, J.
2020. 2020 10th International Online Conference Electric Drives Production Conference (EDPC): 8 and 9 December 2020 ; Proceedings, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC51184.2020.9388186
Analysis of the Variety of Lithium-Ion Battery Modules and the Challenges for an Agile Automated Disassembly System
Gerlitz, E.; Greifenstein, M.; Hofmann, J.; Fleischer, J.
2020. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 175–180, Elsevier. doi:10.1016/j.procir.2021.01.071
Deriving Collaboration Cases in Production Networks Considering Smart Services
Stamer, F.; Bizenberger, P.; Häfner, B.; Lanza, G.
2020. 8th CIRP Global Web Conference – Flexible Mass Customisation (CIRPe 2020). Ed.: K. Kellens, 33–38, Elsevier. doi:10.1016/j.procir.2021.01.048
Fluid Automation - A Definition and an Application in Remanufacturing Production Systems
Wurster, M.; Häfner, B.; Gauder, D.; Stricker, N.; Lanza, G.
2020. 8th CIRP Conference of Assembly Technology and Systems. Ed.: S. Makris, 508–513, Elsevier. doi:10.1016/j.procir.2020.05.267
Intelligent Anomaly Detection of Machine Tools based on Mean Shift Clustering
Netzer, M.; Michelberger, J.; Fleischer, J.
2020. Procedia CIRP, 93, 1448–1453. doi:10.1016/j.procir.2020.03.043
Digital DNA in quality control cycles of high-precision products
Wagner, R.; Haefner, B.; Biehler, M.; Lanza, G.
2020. CIRP annals, manufacturing technology, 69 (1), 373–376. doi:10.1016/j.cirp.2020.03.020
Influences of Design and Manufacturing on the Performance of Electric Traction Drives
Halwas, M.; Hausmann, L.; Wirth, F.; Fleischer, J.; Jux, B.; Doppelbauer, M.
2020. Proceedings 2020 International Conference on Electrical Machines (ICEM 2020), 23–26 August 2020, Gothenburg, Sweden., 488–494, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICEM49940.2020.9270899
Sensitivity Analysis and Validation of the Intelligent Assembly Process for Permanent Magnet Rotors with the Balancing Grade G 2.5
Wößner, W.; Uhl, E.; Hofmann, J.; Fleischer, J.
2020. 2019 9th International Electric Drives Production Conference (EDPC), 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011834
Self-Aware LiDAR Sensors in Autonomous Systems using a Convolutional Neural Network
Qu, J.; Barton, D.; Gönnheimer, P.; Pinsker, F.; Kufer, D.; Fleischer, J.
2020. Procedia manufacturing, 52, 50–55. doi:10.1016/j.promfg.2020.11.010
Identifying the influence of the particle size and morphology of electrode materials on the process of calendering
Wurba, A.
2020. International Battery Production Conference (IBPC 2020), Online, November 2–4, 2020
Deep Learning for Automated Product Design
Krahe, C.; Bräunche, A.; Jacob, A.; Stricker, N.; Lanza, G.
2020. Procedia CIRP, 91, 3–8. doi:10.1016/j.procir.2020.01.135
Synergien zwischen Batterie- und Brennstoffzelle
Schäfer, J.; Weinmann, H. W.; Mayer, D.; Storz, T.; Hofmann, J.; Fleischer, J.
2020. wt Werkstattstechnik online
Digital process management for the integrated bending of thermoplastic CFRP tapes
Kupzik, D.; Ding, J.; Coutandin, S.; Fleischer, J.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3 2020, online, 514–519, Elsevier. doi:10.1016/j.procir.2020.04.061
Approach for developing implementation strategies for circular economy in global production networks
Klenk, F.; Gleich, K.; Meister, F.; Häfner, B.; Lanza, G.
2020. 27th CIRP Life Cycle Engineering (LCE) Conference, 13-15 May 2020, online. Ed.: D. Brissaud, 127–132, Elsevier. doi:10.1016/j.procir.2020.01.052
Using smart services as a key enabler for collaboration in global production networks
Stamer, F.; Steinke, M.; Silbernagel, R.; Häfner, B.; Lanza, G.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3, 2020, online, 730–735, Elsevier. doi:10.1016/j.procir.2020.04.065
Virtual In-line Inspection for Function Verification in Serial Production by means of Artificial Intelligence
Wagner, R.; Fischer, J.; Gauder, D.; Haefner, B.; Lanza, G.
2020. 16th CIRP Conference on Computer Aided Tolerancing (CIRP CAT 2020). Ed.: E. Morse, 63–68, Elsevier. doi:10.1016/j.procir.2020.03.126
Towards increasing robustness in global production networks by means of an integrated disruption management
Peukert, S.; Lohmann, J.; Haefner, B.; Lanza, G.
2020. 53rd CIRP Conference on Manufacturing Systems (CIRP CMS), July 1-3, 2020, online, 706–711, Elsevier. doi:10.1016/j.procir.2020.03.009
Metal additive manufacturing of multi-material dental strut implants
Kain, M.; Nadimpalli, V. K.; Miqueo, A.; May, M. C.; Yagüe-Fabra, J. A.; Häfner, B.; Pedersen, D. B.; Calaon, M.; Tosello, G.
2020. Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020. Ed.: R. K. Leach, 175–176, European Society for Precision Engineering and Nanotechnology (euspen)
Vibration analysis of moving machine tool axes based on phase information in video data
Klee, B.; Flohr, L.; Parth, M.; Kleinert, M.; Fleischer, J.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 364–368, Elsevier. doi:10.1016/j.procir.2020.05.063
Analytical modeling of the winding trajectory of the multi-wire needle winding process
Hofmann, J.; Lepold, A.; Fleischer, J.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 497–502, Elsevier. doi:10.1016/j.procir.2020.05.086
Autonomous planning tool for changeable assembly systems
Staehr, T.; Stricker, N.; Lanza, G.
2020. 13th CIRP Conference on Intelligent Computation in Manufacturing Engineering, 17-19 July 2019, Gulf of Naples, Italy. Ed.: R. Teti, 104–109, Elsevier. doi:10.1016/j.procir.2020.05.019
Effect of tool coatings on surface grain refinement in orthogonal cutting of AISI 4140 steel
González, G.; Plogmeyer, M.; Zanger, F.; Biehl, S.; Bräuer, G.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 176–180, Elsevier. doi:10.1016/j.procir.2020.02.113
Experimental identification of a surface integrity model for turning of AISI4140
Stampfer, B.; Böttger, D.; Gauder, D.; Zanger, F.; Häfner, B.; Straß, B.; Wolter, B.; Lanza, G.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 83–88, Elsevier. doi:10.1016/j.procir.2020.02.067
Complementary Machining: Effect of tool types on tool wear and surface integrity of AISI 4140
Schwalm, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 89–94, Elsevier. doi:10.1016/j.procir.2020.02.035
Milling parameter and tool wear dependent surface quality in micro-milling of brass
Dehen, S.; Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2020. 5th CIRP Conference on Surface Integrity (CSI 2020), 1st E-Conference, 1 - 5 June 2020. Ed.: Pedro J. Arrazola, 95–100, Elsevier. doi:10.1016/j.procir.2020.02.024
A Data-Driven Approach for Quality Analytics of Screwing Processes in a Global Learning Factory
Yang, S.; Liu, H.; Zhang, Y.; Arndt, T.; Hofmann, C.; Häfner, B.; Lanza, G.
2020. Procedia manufacturing, 45, 454–459. doi:10.1016/j.promfg.2020.04.052
5G and AI technology application in the AMTC learning factory
Zhang, W.; Cai, W.; Min, J.; Fleischer, J.; Ehrmann, C.; Prinz, C.; Kreimeier, D.
2020. Procedia manufacturing, 45, 66–71. doi:10.1016/j.promfg.2020.04.066
Machine learning based activity recognition to identify wasteful activities in production
Hofmann, C.; Patschkowski, C.; Häfner, B.; Lanza, G.
2020. Procedia manufacturing, 45, 171–176. doi:10.1016/j.promfg.2020.04.090
Robust predictive–reactive scheduling and its effect on machine disturbance mitigation
Echsler Minguillon, F.; Stricker, N.
2020. CIRP annals, manufacturing technology, 69 (1), 401–404. doi:10.1016/j.cirp.2020.03.019
A new approach for modelling the fibre path in bolted joints of continuous fibre reinforced composites
Roth, S.; Pracisnore, F.; Coutandin, S.; Fleischer, J.
2020. Composite Structures, 243, Article no: 112184. doi:10.1016/j.compstruct.2020.112184
Multi-objective optimization of lean and resource efficient manufacturing systems
Greinacher, S.; Overbeck, L.; Kuhnle, A.; Krahe, C.; Lanza, G.
2020. Production engineering, 14, 165–176. doi:10.1007/s11740-019-00945-9
The influence of work hardening and residual stresses on the fatigue behavior of high frequency mechanical impact treated surface layers
Schubnell, J.; Pontner, P.; Wimpory, R. C.; Farajian, M.; Schulze, V.
2020. International journal of fatigue, 134, Article No.105450. doi:10.1016/j.ijfatigue.2019.105450
Influence of Wire Tolerances on Hairpin Shaping Processes
Wirth, F.; Fleischer, J.
2019. 9th International Electric Drives Production Conference (E|DPC) : 3rd and 4th December 2019, Esslingen, Germany : proceedings, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011999
Mechanical characterisation of the shear, bending and friction behaviour of bindered woven fabrics during the forming process
Coutandin, S.; Wurba, A.; Luft, A.; Schmidt, F.; Dackweiler, M.; Fleischer, J.
2019. Materials Science and Engineering Technology, 50 (12), 1573–1587. doi:10.1002/mawe.201900074
Produktionsnetzwerke und Fabriktypen der Zukunft – Helfen Fabriktypen beim Aufbau neuer Standorte in Produktionsnetzwerken?
Lanza, G.; Häfner, B.; Verhaelen, B.; Peukert, S.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (12), 797–801. doi:10.3139/104.112196
Systematic Investigation of the Grooving Process and its Influence on Slot Insulation of Stators with Hairpin Technology
Mayer, D.; Hausmann, L.; Maul, N.; Reinschmidt, L.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (EDPC), Article no: 9011935, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011935
Coherences Between Production Technology and Performance of Electric Traction Drives
Halwas, M.; Sell-Le Blanc, F.; Jux, B.; Doppelbauer, M.; Wirth, F.; Hausmann, L.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (E|DPC), Article no: 9011889, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011889
Feasibility Study for Enameled Round Copper Wire Compression within Slots of Electrical Machines
Sell-Le Blanc, F.; Halwas, M.; Jager, D.; Weisse, L.; Jovanoski, J.; Kehl, N.; Hofmann, J.; Fleischer, J.
2019. 2019 9th International Electric Drives Production Conference (EDPC), 1–9, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9012030
Development of a new model based servo-controlled wire tensile force control for stator winding applications
Hofmann, J.; Sell-Le Blanc, F.; Wößner, W.; Angiyan-Vishnuram, E.; Kohn, H.; Lepold, A.; Weber, T.; Schuttler, T.; Busch, P. A.; Fleischer, J.
2019. 9th International Electric Drives Production Conference (EDPC), Article no: 9011839, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC48408.2019.9011839
Experimental investigation of frictional behavior in a filament winding process for joining fiber-reinforced profiles
Dackweiler, M.; Hagemann, L.; Coutandin, S.; Fleischer, J.
2019. Composite structures, 229, Art.-Nr. 111436. doi:10.1016/j.compstruct.2019.111436
Akustische Prozessüberwachung für das Laserstrahlschmelzen (LBM) mit neuronalen Netzen: Eine Potentialbewertung
Eschner, N.; Weiser, L.; Häfner, B.; Lanza, G.
2019. Technisches Messen, 86 (11), 661–672. doi:10.1515/teme-2019-0070
In-Process Analysis of Minimum Quantity Lubrication during Drilling of AISI 4140
Stampfer, B.; Zanger, F.; Schulze, V.
2019. R. Schmitt & G. Schuh (Eds.), Advances in production research : proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018. Eds.: Robert Schmitt, Günther Schuh, 541–550, Springer International Publishing. doi:10.1007/978-3-030-03451-1_53
Influences of Increasind Coating Thicknesses and Calendering Degrees on Single-Sheet-Stack Formation
Weinmann, H. W.; Fleischer, J.
2019. T. U. Braunschweig (Ed.), IBPC 2019 : International Battery Production Conference : 4th - 6th November 2019 : conference brochure, 49 -, Technische Universität Braunschweig
Agile battery production – a novel concept for the manufacturing of battery cells flexible in format and material
Storz, T.; Fleischer, J.
2019. IBPC (Ed.), IBPC 2019 : International Battery Production Conference : 4th - 6th November 2019 : conference brochure, Technische Universität Braunschweig
Model-Based Assembly Optimization for Unbalance-Minimized Production Automation of Electric Motors
Wößner, W.; Peter, M.; Hofmann, J.; Fleischer, J.
2019. Advances in Production Research – Proceedings of the 8th Congress of the German Academic Association for Production Technology (WGP), Aachen, November 19-20, 2018. Ed.: R. Schmitt, 551–562, Springer International Publishing. doi:10.1007/978-3-030-03451-1_54
Intelligente Störungserkennung einer Werkzeugmaschine – Basierend auf Methoden des Maschinellen Lernens
Netzer, M.; Michelberger, J.; Fleischer, J.
2019. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (10), 635–638. doi:10.3139/104.112158
Concept for the Configuration of Turnkey Production Systems
Gönnheimer, P.; Kimmig, A.; Ehrmann, C.; Schlechtendahl, J.; Güth, J.; Fleischer, J.
2019. (F. Dietrich & N. Krenkel, Eds.) Procedia CIRP Hrsg.: Dietrich, Franz; Krenkel, Nicole, 86, 234–238. doi:10.1016/j.procir.2020.01.047
Transformationshub Elektromobilität in Baden-Württemberg
Hofmann, J.; Halwas, M.; Weinmann, H.; Wößner, W.; Schäfer, J.; Hausmann, L.; Wirth, F.; Storz, T.; Schild, L.
2019. Auf dem Weg zur Elektromobilität – Wettbewerbsfaktor Produktionstechnik : Tagungsband zur wbk-Herbsttagung 2019. Hrsg.: J. Fleischer, 57 – 73, Shaker Verlag
Optimization of the stream finishing process for mechanical surfacetreatment by numerical and experimental process analysis
Neuenfeldt, P.; Kacaras, A.; Zanger, F.; Schulze, V.
2019. K. wbk Institute of Production Science (Ed.), Symposium Mechanical Surface Treatment 2019 : 8th Workshop Machine Hammer Peening : 22th - 23rd October 2019, Karlsruhe. Hrsg.: Volker Schulze, 138–149, wbk Institut für Produktionstechnik
Surface Engineering: Ressourceneffizienz für die Fertigung von Morgen
Schulze, V.; Gerstenmeyer, M.; Segebade, E.; Langer, J.
2019. wbk Institut für Produktionstechnik
Analyses of technical and true overlap in hammer peening operations
Segebade, E.; Hilligardt, A.; Volker, S.
2019. D. Trauth & R. Mannens (Eds.), Symposium Mechanical Surface Treatment 2019 : 8th Workshop Machine Hammer Peening : 22nd and23rd October 2019, Karlsruhe. Hrsg.: Volker Schulze, 76–84, wbk Institut für Produktionstechnik
Herstellung punktschweißbarer CFK-Metall-Bauteile im RTM-Prozess
Roth, S.; Warnck, M.; Coutandin, S.; Fleischer, J.
2019. Lightweight Design, 12 (5), 18–23. doi:10.1007/s35725-019-0047-1
Changeability and flexibility of assembly line balancing as a multi-objective optimization problem
Fisel, J.; Exner, Y.; Stricker, N.; Lanza, G.
2019. Journal of Manufacturing Systems, 53, 150–158. doi:10.1016/j.jmsy.2019.09.012
Ausbildungsfabrik Statorfertigung – Ein Beitrag zur Mitarbeiterqualifizierung im Kontext der Elektromobilität
Hausmann, L.; Wirth, F.; Franck, C.; Förderer, M.; Karrer, M.; Hofmann, J.; Fleischer, J.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (10), 621–626. doi:10.3139/104.112166
Werkzeugloses Umformen lastangepasster UD-Verstärkungen
Kupzik, D.; Coutandin, S.; Fleischer, J.
2019. lightweight design, 12, 38–43. doi:10.1007/s35725-019-0036-4
Automated Integrated Handling and Preforming
Kupzik, D.; Ballier, F.; Fleischer, J.
2019. Continuous–Discontinuous Fiber-Reinforced Polymers : An Integrated Engineering Approach. Ed.: T. Böhlke, 25–45, Carl Hanser Verlag
Auto-configuration of a digital twin for machine tools by intelligent crawling
Gönnheimer, P.; Hillenbrand, J.; Betz-Mors, T.; Bischof, P.; Mohr, L.; Fleischer, J.
2019. J. P. Wulfsberg, W. Hintze & B.-A. Behrens (Eds.), Production at the leading edge of technology: proceedings of the 10th Congress of the German Academic Association for Production Technology (WGP), Dresden, 23-24 September 2020. Hrsg.: Jens P. Wulfsberg,, Wolfgang Hintze, Bernd-Arno Behrens, 543–552, Springer
Gear skiving of external gears with internally geared tools
Klose, J.; Zanger, F.; Schulze, V.
2019. International Conference on Gears 2019. 3rd International Conference on High Performance Plastic Gears 2019. 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18 – 20, 2019. Hrsg.: VDI Wissensforum GmbH, 1579–1590, VDI Verlag
Analysis of process forces and surface topography when manufacturing case-hardened gears by double flanked hard skiving
Zapf, M.; Klose, J.; Zanger, F.; Schulze, V.
2019. International Conference on Gears 2019. 3rd International Conference on High Performance Plastic Gears 2019. 3rd International Conference on Gear Production 2019 : Garching/Munich, Germany September 18 – 20, 2019. Hrsg.: VDI Wissensforum GmbH, 1647–1658, VDI Verlag. doi:10.51202/9783181023556-1647
Camera Based Ball Screw Spindle Defect Classification System
Schlagenhauf, T.; Feuring, C.-P.; Hillenbrand, J.; Fleischer, J.
2019. Springer (Ed.), Production at the leading edge of technology: Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Eds.: Jens Peter Wulfsberg, Wolfgang Hintze, Bernd-Arno Behrens, 503–512, Springer
Funktionsorientierte Qualitätssicherung von Mikrozahnrädern hinsichtlich des Geräuschverhaltens
Gauder, D.; Wagner, R.; Gölz, J.; Häfner, B.; Lanza, G.
2019. Technisches Messen, 86 (9), 469–477. doi:10.1515/teme-2019-0090
CAD/CAM-Schnittstelle für die Wickeltechnik : Systematische Entwicklung und Validierung zur beschleunigten Inbetriebnahme
Hofmann, J.; Bolender, M.; Sun, P.; Fleischer, J.; Sell-Le Blanc, F.; Köhn, H.
2019. wt Werkstattstechnik online, 109 (7/8), 611–616. doi:10.37544/1436-4980-2019-07-08-101
Integration von Machine Vision in Kugelgewindespindeln
Schlagenhauf, T.; Hillenbrand, J.; Klee, B.; Fleischer, J.
2019. wt Werkstattstechnik online, 109 (7/8), 605–610. doi:10.37544/1436-4980-2019-07-08-95
Unwucht hochausgenutzter Synchronmaschinen – Ein modellbasierter Ansatz zur Vermeidung ungewollter Unwuchtänderungen
Wößner, W.; Lorenz, M.; Hofmann, J.; Jux, B.; Langheck, A.; Doppelbauer, M.; Fleischer, J.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (7-8), 464–468. doi:10.3139/104.112127
Advances in electric drive production for e-mobility via the integration of digital assurance processes
Hofmann, J.
2019. H. Group (Ed.), CWIEME: 21. – 23.05.2019 Messe Berlin
Konfiguration von Robotiklösungen
Dackweiler, M.; Krause, M.; Coutandin, S.; Klee, B.; Fleischer, J.
2019. VDI-Z, 8, 62–65
Optimierte Fertigung elektrischer Traktionsmotoren durch Technologien der Industrie 4.0
Wirth, F.; Hausmann, L.; Halwas, M.; Hofmann, J.; Mayer, D.; Wößner, W.; Fleischer, J.
2019. Future Mobility : automatisiert - vernetzt - elektrisch. Hrsg.: Technische Akademie Esslingen e.V., 15, Technische Akademie Esslingen (TAE)
Ausprägungen von Industrie 4.0 im Mittelstand: Zusammenhänge zwischen der Morphologie von Produktionsbereichen und der Einsetzbarkeit von Industrie-4.0-Methoden
Liebrecht, C.; Krodel, T.; Stricker, N.; Lanza, G.
2019. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (6), 398–403. doi:10.3139/104.112096
Load-bearing FVK metal hybrid structure for automotive cresh applications - simulation, production, performance
Muth, M.; Bernath, A.; Seuffert, J.; Roth, S.; Coutandin, S.; Fleischer, J.; Henning, F.; Weidenmann, K. A.
2019. T. U. D. Institut für Leichtbau und Kunststofftechnik (Ed.), Aufbruch zu digitalen Horizonten : 23. Internationales Dresdner Leichtbausymposium : 27. bis 28. Juni 2019, Technische Universität Dresden (TU Dresden)
Intelligent, konnektiv, sensitiv
Friedmann, M.; Nguyen Duc, H.; Coutandin, S.; Fleischer, J.; May, M.
2019. Handling, 6, 14–15
Efficient parameter development strategy of tool steel materials for Laser Additive Manufacturing
Graf, G.; Leoni, M.; Müller, T.; Fischer-Bühner, J.; Beckers, D.; Donisi, S.; Zanger, F.; Schulze, V.
2019. HI-AM 2020 — Holistic Innovation in Additive Manufacturing 2020, 25th - 26th June 2020
Investigation of closed-loop supply chains with product refurbishment as integrated location-inventory problem
Kuhnle, A.; Lanza, G.
2019. Production Engineering - Research and Development, 13 (3-4), 293–303. doi:10.1007/s11740-019-00885-4
Practice-oriented methodology for reallocating production technologies to production locations in global production networks
Treber, S.; Moser, E.; Helming, S.; Haefner, B.; Lanza, G.
2019. Production Engineering - Research and Development, 13 (3-4), 283–291. doi:10.1007/s11740-019-00876-5
Kollaboration in globalen Wertschöpfungsnetzwerken : Datenbasierte Regelung kollaborativer Wertschöpfungsnetzwerke mittels geschützter Transparenz
Silbernagel, R.; Stamer, F.; Häfner, B.; Linzbach, J.; Lanza, G.
2019. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (5), 314–317. doi:10.3139/104.112085
Process Simulation of Sheet Molding Compound (SMC) using Direct Bundle Simulation
Meyer, N.; Schöttl, L.; Bretz, L.; Hrymak, A.; Kärger, L.
2019, May 8. 12th International Conference on Composite Science and Technology (2019), Sorrento, Italy, May 8–10, 2019
Thermografie zur Detektion von CFK-Schäden – Quantitativer Vergleich der Lock-in- und Puls-Phasen-Thermografie
Ekanayake, S.; Wiedbrauck, D.; Schäferling, M.; Häfner, B.; Schmitt, R. H.; Lanza, G.
2019. Technisches Messen, 86 (5), 285–296. doi:10.1515/teme-2018-0086
Prozessmodellierung des Faserwickelns als Fügeverfahren
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2019. H. Messe (Ed.), Hannover Messe 2019, 01.04. - 05.04.2019 Hannover, 1–17, Deutsche Messe AG
Manufacturing uncertainties and resulting robustness of optimized patch positions on continuous-discontinuous fiber reinforced polymer structures
Fengler, B.; Schäferling, M.; Schäfer, B.; Bretz, L.; Lanza, G.; Häfner, B.; Hrymak, A.; Kärger, L.
2019. Hospital physician, 213, 47–57. doi:10.1016/j.compstruct.2019.01.063
Robust order planning with planned orders for multi-variant series production in a production network
Buergin, J.; Hammerschmidt, A.; Hao, H.; Kramer, S.; Tutsch, H.; Lanza, G.
2019. International journal of production economics, 210, 107–119. doi:10.1016/j.ijpe.2019.01.013
Simulative and Experimental Investigation of Gear Skiving with Reduced Axis Crossing Angles
Vargas, B.; Klose, J.; Zanger, F.; Schulze, V.
2019. Forschungsvereinigung Antriebstechnik e.V. (FVA) (Ed.), 7th International Conference on Gear and Drivetrain Production, GETPRO, 19th – 20th March, 2019, Würzburg, 235–244
Reinforcement learning for opportunistic maintenance optimization
Kuhnle, A.; Jakubik, J.; Lanza, G.
2019. Production Engineering, 13 (1), 33–41. doi:10.1007/s11740-018-0855-7
Robust assignment of customer orders with uncertain configurations in a production network for aircraft manufacturing
Buergin, J.; Blaettchen, P.; Kronenbitter, J.; Molzahn, K.; Schweizer, Y.; Strunz, C.; Almagro, M.; Bitte, F.; Ruehr, S.; Urgo, M.; Lanza, G.
2019. International journal of production research, 57 (3), 749–763. doi:10.1080/00207543.2018.1482018
Determination of the abstraction level in production network models
Benfer, M.; Ziegler, M.; Gützlaff, A.; Fränken, B.; Cremer, S.; Prote, J.-P.; Schuh, G.
2019. P. Butala, E. Govekar & R. Vrabič (Eds.), 52nd CIRP Conference on Manufacturing Systems (CMS), CIRP Conference on Manufacturing Systems (CMS), Ljubljana, Slovenia, June 12-14, 2019 Hrsg.: Butala, Peter; Govekar, Edvard; Vrabič, Rok, 198–203, Elsevier. doi:10.1016/j.procir.2019.03.035
Continuous-Discontinuous Fiber-Reinforced Polymers
Helfrich, A.; Zanger, F.; Schulze, V.
2019. Continuous–discontinuous fiber-reinforced polymers : an integrated engineering approach. Ed.: Thomas Böhlke, 61–76, Carl Hanser Verlag
Rotational Molding for the Production of Hybrid FRP Metal Tension and Compression Rods with Form Fit – Schleuderverfahren zur Herstellung von hybriden FKV Metall Zug-Druck-Stangen mit Formschluss
Nieschlag, J.; Ruhland, P.; Coutandin, S.; Fleischer, J.
2019. Springer (Ed.), Production at the leading edge of technology – Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Ed.: J. Wulfsberg, 131–138, Springer Verlag. doi:10.1007/978-3-662-60417-5_13
A new concept for agile production of battery cells
Storz, T.; Fleischer, J.
2019. AABC (Ed.), Battery Engineering Symposium 2019 : held at AABC Europe 2019 : Strasbourg, France, 27th-31st January 2019, 184–194, Curran
Auf dem Weg zur Elektromobilität ? Wettbewerbsfaktor Produktionstechnik
Schulze, V.; Fleischer, J.; Lanza, G. (Eds.)
2019. Shaker Verlag. doi:10.2370/9783844069532
New Production Technologies - Material- and Process Characterization of Fibre-Metal-Elastomer Laminate Components with high forming degrees
Roth, S.; Coutandin, S.; Fleischer, J.
2019. Technologies for economical and functional lightweight design – Conference proceedings 2018. Ed.: K. Dröder, 147–154, Springer Verlag. doi:10.1007/978-3-662-58206-0_14
Safe Human Robot Collision Avoidance with an End-Effector integrated 360° LiDAR System
Schäfer, M.; Büsching, M.; Coutandin, S.; Fleischer, J.
2019. S. Vieweg (Ed.), Tagungsband des 4. Kongresses Montage Handhabung Industrieroboter. Hrsg.: Thorsten Schüppstuhl, Kirsten Tracht, Jürgen Roßmann, 138–147, Springer Verlag. doi:10.1007/978-3-662-59317-2_14
Fabrikplanung für die additive Fertigung: Integration von Spezifika der additiven Fertigung und Industrie 4.0 in die Fabrikplanung
Jacob, A.; Hillermeier, M.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (4), 278–283
Next Level Production Networks
Friedli, T.; Schuh, G.; Lanza, G.; Remling, D.; Gützlaff, A.; Stamer, F.
2019. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 114 (3), 101–104. doi:10.3139/104.112057
Track & Trace als Basis für die Kreislaufwirtschaft in der Automobilindustrie
Lanza, G.; Klenk, F.; Krahe, C.
2019. Werkstoffe in der Fertigung, 2019 (6), 22–23
Learning Factory on Global Production: Use Case Augmented Go & See
Lanza, G.; Liebrecht, C.
2019. M. Taisch, M. L. Casidsid, M. Despeisse, R. Luglietti, G. May, T. R. Morin, M. Pinzone & T. Wuest (Eds.), The 2019 World Manufacturing Forum Report. Eds.: Marco Taisch, Mark L. Casidsid, Mélanie Despeisse, Rossella Luglietti, Gökan Mayan, Teresa R. Mori, Marta Pinzone, Thorsten Wuest, 56, World Manufacturing Foundation
Methoden-Toolbox zur Einführung von Industrie 4.0: Identifikation und Bewertung von Industrie 4.0-Potenzialen in mittelständischen Unternehmen
Liebrecht, C.; Krogmann, M.; Stricker, N.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (4), 214–220
Uncertainty Evaluation of Pore Analysis for Additively Manufactured Parts using Cross Sections
Schild, L.; Fülling, M.; Haefner, B.; Lanza, G.
2019. 9th Conference on Industrial Computed Tomography (iCT) 2019, 13-15 Feb, Padova, Italy, 1–8, NDT.net
Challenges and Potentials of Digital Twins and Industry 4.0 in Product Design and Production for High Performance Products
Wagner, R.; Schleich, B.; Haefner, B.; Kuhnle, A.; Wartzack, S.; Lanza, G.
2019. (G. D. Putnik, Ed.) Procedia CIRP, 84, 88–93. doi:10.1016/j.procir.2019.04.219
Scalable and flexible production ramp-up in global production networks - a strategic network approach
Verhaelen, B.; Haefner, B.; Lanza, G.
2019. Operations Adding Value to Society: 26th EurOMA Conference Proceedings. Ed.: G. Kovács, 317–326
The 2019 World Manufacturing Forum Report: Skills for the Future of Manufacturing
Taisch, M.; Casidsid, M. L.; Despeisse, M.; Luglietti, R.; May, G.; Morin, T. R.; Pinzone, M.; Wuest, T. (Eds.)
2019. World Manufacturing Foundation
9th Conference on Industrial Computed Tomography (iCT) 2019, 13-15 Feb, Padova, Italy
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2019. NDT.net
Data Analytics for Manufacturing Systems – A Data-Driven Approach for Process Optimization
Ungermann, F.; Kuhnle, A.; Stricker, N.; Lanza, G.
2019. Procedia CIRP, 81, 369–374. doi:10.1016/j.procir.2019.03.064
Die Zukunft der Kennzahlensysteme: Unternehmenssteuerung durch ein ganzheitliches KPI-Netzwerk auf Basis eines Digital Twins
Ungermann, F.; Jacob, A.; Verhaelen, B.; Itterheim, A.; Park, Y.-B.; Stricker, N.; Lanza, G.
2019. Industrie 4.0 Management, 35 (5), 25–29
Planen mit PlanQ: Das Forschungsprojekt PlanQ soll das Qualitätsmanagement automobiler Lieferketten verbessern
Treber, S.; Lanza, G.
2019. BVL Magazin - Das Magazin der Bundesvereinigung Logistik, 2019 (1), 34–35
Qualitätsregelstrategien in Wertschöpfungsnetzwerken: Strategien zur datenbasierten Qualitätsregelung kollaborativer Wertschöpfungsnetzwerke
Silbernagel, R.; Wagner, R.; Haefner, B.; Lanza, G.
2019. wt Werkstattstechnik online, 109 (11-12), 802–806
Framework for Smart Services as a premise for collaboration in the era of manufacturing services = Framework für Smart Services als Grundlage für Kollaboration im Kontext aufkommender industrieller Dienstleistungen
Stamer, F.; Labbouz, A.; Haefner, B.; Lanza, G.
2019. Production at the leading edge of technology : Proceedings of the 9th Congress of the German Academic Association for Production Technology (WGP), September 30th - October 2nd, Hamburg 2019. Ed.: J. P. Wulfsberg, 603–612, Springer Vieweg. doi:10.1007/978-3-662-60417-5_60
Integrated Production and Logistics Planning and Control in Global Production Networks
Helming, S.; Buergin, J.; Bitte, F.; Haefner, B.; Lanza, G.
2019. Advances in Production Research. Ed.: R. Schmitt, 637–646, Springer Nature Switzerland AG. doi:10.1007/978-3-030-03451-1_62
Development of a Structured Approach for Reactive Disruption Management in Supply Chain Networks - an Integrated Perspective
Helming, S.; Haverkamp, C.; Häfner, B.; Lanza, G.
2019. International Conference on Competitive Manufacturing (COMA 19) proceedings. Ed.: D. Dimitrov, 431–437
CAD/CAM-Schnittstelle für die Wickeltechnik - Systematische Entwicklung und Validierung zur beschleunigten Inbetriebnahme
Hofmann, J.; Bolender, M.; Sun, P.; Sell-Le Blanc, F.; Köhn, H.; Fleischer, J.
2019. wt Werkstattstechnik online, 109 (7/8), 611–616
Model-Based Assembly Optimization for Unbalance-Minimized Production Automation of Electric Motors
Wößner, W.; Peter, M.; Hofmann, J.; Fleischer, J.
2019. Advances in Production Research. Ed.: R. Schmitt, 551–562, Springer International Publishing
Integrated Gripping-system for Heating and Preforming of Thermoplastic Unidirectional Tape Laminates
Moll, P.; Ohlberg, L.; Salzer, S.; Coutandin, S.; Fleischer, J.
2019. Procedia CIRP, 85, 266–271. doi:10.1016/j.procir.2019.10.006
Shifting value stream patterns along the product lifecycle with digital twins
Schleich, B.; Dittrich, M.-A.; Clausmeyer, T.; Damgrave, R.; Erkoyuncu, J. A.; Haefner, B.; Lange, J. de; Plakhotnik, D.; Scheidel, W.; Wuest, T.
2019. Procedia CIRP, 86, 3–11. doi:10.1016/j.procir.2020.01.049
Information reference architecture of turnkey project based on RAMI4.0
Xie, S.; Li, D.; Zhang, W.; Zhu, Z.; Fleischer, J.
2019. Jisuanji-jicheng-zhizao-xitong, 25 (12), 3081–3089. doi:10.13196/j.cims.2019.12.010
Metallurgical and material properties correlations between machined and severely plastic deformed aluminium alloy
Imbrogno, S.; Umbrello, D.; Schulze, V.; Zanger, F.; Segebade, E.
2019. International journal of material forming. doi:10.1007/s12289-019-01515-1
Microstructural investigation of deformation of Al folis in cathode current collectors during compression of electrode coatings
Kopp, A.; Niedermaier, J.; Bold, B.; Holl, K.; Bernthaler, T.; Schneider, G.
2019. International Battery Production Conference (IBPC 2019), Brunswick, Germany, November 4–6, 2019
Identifying the Impact of Calendering on Subsequent Processes Using a New Approach to Quality Assurance
Bold, B.; Weinmann, H.; Bernecker, J.; Fleischer, J.
2019. Advanced Battery Power (2019), Aachen, Germany, April 2–4, 2019
Automatisierte Demontage und zustandsorientiertes Remanufacturing von Lithium-Ionen Batteriemodulen
Fleischer, J.; Schäfer, J.
2019. 8. Ressourceneffizienz- und Kreislaufwirtschaftskongress Baden-Württemberg (KONGRESS BW 2019), Stuttgart, Germany, October 23–24, 2019
Challenges and solutions in automated disassembly and condition-based remanufacturing of lithium-ion battery modules for a circular economy
Schäfer, J.; Singer, R.; Hofmann, J.; Fleischer, J.
2019. Global Conference on Sustainable Manufacturing (GCSM 2019), Shanghai, China, October 9–11, 2019
In-line measurement of wrinkle formation and strains for NMC 622 cathodes while calendering
Bold, B.; Kopp, A.; Denk, N.; Schneider, G.; Fleischer, J.
2019. International Battery Production Conference (IBPC 2019), Brunswick, Germany, November 4–6, 2019
Surface Engineering: Ressourceneffizienz für die Fertigung von Morgen - Leitfaden zur Ressourceneffizienz in der Produktion
Schulze, V.; Gerstenmeyer, M.; Segebade, E.; Langer, J.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000098958/v2
Methodical approach for the development of a platform for the configuration and operation of turnkey production systems
Gönnheimer, P.; Kimmig, A.; Mandel, C.; Stürmlinger, T.; Yang, S.; Schade, F.; Ehrmann, C.; Klee, B.; Behrendt, M.; Schlechtendahl, J.; Fischer, M.; Trautmann, K.; Fleischer, J.; Lanza, G.; Ovtcharova, J.; Becker, J.; Albers, A.
2019. Procedia CIRP, 84, 880–885. doi:10.1016/j.procir.2019.04.260
Numerical modelling of cutting forces in gear skiving
Vargas, B.; Zapf, M.; Klose, J.; Zanger, F.; Schulze, V.
2019. Procedia CIRP, 82, 455–460. doi:10.1016/j.procir.2019.04.039
Influence of anisotropy of additively manufactured AlSi10Mg parts on chip formation during orthogonal cutting
Segebade, E.; Gerstenmeyer, M.; Dietrich, S.; Zanger, F.; Schulze, V.
2019. Procedia CIRP, 82, 113–118. doi:10.1016/j.procir.2019.04.043
Thermomechanically coupled numerical simulation of cryogenic orthogonal cutting
Stampfer, B.; Golda, P.; Zanger, F.; Schießl, R.; Maas, U.; Schulze, V.
2019. Procedia CIRP, 82, 438–443. doi:10.1016/j.procir.2019.04.036
Modeling and optimization of winding paths to join lightweight profiles with continuous carbon fibers
Dackweiler, M.; Mayer, T.; Coutandin, S.; Fleischer, J.
2019. Production engineering, 13, 519–528. doi:10.1007/s11740-019-00914-2
A new process route for the manufacturing of highly formed fiber-metal-laminates with elastomer interlayers (FMEL)
Roth, S.; Stoll, M. M.; Weidenmann, K. A.; Coutandin, S.; Fleischer, J.
2019. The international journal of advanced manufacturing technology, 104 (1-4), 1293–1301. doi:10.1007/s00170-019-04103-4
五轴加工奇异问题分析与非线性误差控制 = Singularity analysis and non-linear error control of five-axis machining
Li, D.; Zhang, W.; Sui, H.; Jin, X.; Shang, T.; Fleischer, J.
2019. Jisuanji-jicheng-zhizao-xitong, 25 (5), 1112–1118. doi:10.13196/j.cims.2019.05.009
Acoustic emission-based characterization of focal position during ultra-short pulse laser ablation
Kacaras, A.; Bächle, M.; Schwabe, M.; Zanger, F.; Puente León, F.; Schulze, V.
2019. Procedia CIRP, 81, 270–275. doi:10.1016/j.procir.2019.03.047
Modular smart controller for Industry 4.0 functions in machine tools
Barton, D.; Gönnheimer, P.; Schade, F.; Ehrmann, C.; Becker, J.; Fleischer, J.
2019. Procedia CIRP, 81, 1331–1336. doi:10.1016/j.procir.2019.04.022
Global production networks: Design and operation
Lanza, G.; Ferdows, K.; Kara, S.; Mourtzis, D.; Schuh, G.; Váncza, J.; Wang, L.; Wiendahl, H.-P.
2019. CIRP annals, manufacturing technology, 68 (2), 823–841. doi:10.1016/j.cirp.2019.05.008
Edge Formation in High-Speed Intermittent Slot-Die Coating of Disruptively Stacked Thick Battery Electrodes
Diehm, R.; Weinmann, H.; Kumberg, J.; Schmitt, M.; Fleischer, J.; Scharfer, P.; Schabel, W.
2019. Energy technology, 8 (2), Art. Nr.: 1900137. doi:10.1002/ente.201900137
Development of a training concept for leadership 4.0 in production environments
Helming, S.; Ungermann, F.; Hierath, N.; Stricker, N.; Lanza, G.
2019. 9th Conference on Learning Factories, CLF 2019; Braunschweig; Germany; 26 March 2019 through 28 March 2019, 38–44, Elsevier. doi:10.1016/j.promfg.2019.03.007
Augmented Go & See: An approach for improved bottleneck identification in production lines
Hofmann, C.; Staehr, T.; Cohen, S.; Stricker, N.; Haefner, B.; Lanza, G.
2019. 9th Conference on Learning Factories, CLF 2019; Braunschweig; Germany; 26 March 2019 through 28 March 2019. Ed.: C. Herrmann, 148–154, Elsevier. doi:10.1016/j.promfg.2019.03.023
Planning for changeability and flexibility using a frequency perspective
Echsler Minguillon, F.; Schömer, J.; Stricker, N.; Lanza, G.; Duffie, N.
2019. CIRP annals, manufacturing technology, 68 (1), 427–430. doi:10.1016/j.cirp.2019.03.006
Methodology on developing an assessment tool for intralogistics by considering cyber-physical production systems enabling technologies
Pei, S.; Zhao, J.; Zhang, N.; Guo, M.
2019. International journal of computer integrated manufacturing, 32 (4-5), 406–412. doi:10.1080/0951192X.2019.1605200
Optimization of the stream finishing process for mechanical surface treatment by numerical and experimental process analysis
Zanger, F.; Kacaras, A.; Neuenfeldt, P.; Schulze, V.
2019. CIRP annals, manufacturing technology, 68 (1), 373–376. doi:10.1016/j.cirp.2019.04.086
Integrated approach for optimizing quality control in international manufacturing networks
Arndt, T.; Kumar, M.; Lanza, G.; Tiwari, M. K.
2019. Production planning & control, 30 (2-3), 225–238. doi:10.1080/09537287.2018.1534271
Reconfigurable modular production plant for thermoplastic hybrid composites
Moll, P.; Schäfer, M.; Coutandin, S.; Fleischer, J.
2019. Production engineering, 13 (3-4), 469–477. doi:10.1007/s11740-019-00898-z
Optimization of the Linear Coil Winding Process by Combining New Actuator Principles on the Basis of Wire Forming Analysis
Hofmann, J.; Komodromos, A.; Fleischer, J.; Tekkaya, A. E.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658264, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658264
Intelligent Rotor Assembly Enabling Positive Balancing Concepts for High-Performance Permanent Magnet Rotors
Wößner, W.; Stoll, J.; Flammer, M. O.; Wurster, P.; Peter, M.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658367, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658367
Systematic Development and Comparison of Concepts for an Automated Series-Flexible Trickle Winding Process
Halwas, M.; Ambs, P.; Marsetz, M.; Baier, C.; Schigal, W.; Hofmann, J.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658360, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658360
FE-Based Simulation of Hairpin Shaping Processes for Traction Drives
Wirth, F.; Kirgor, T.; Hofmann, J.; Fleischer, J.
2019. 2018 8th International Electric Drives Production Conference (EDPC), 4 and 5 December 2018, Schweinfurt, Germany: Proceedings, Art.-Nr.: 8658278, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2018.8658278
Development of a Data Fusion-Based Multi-Sensor System for Hybrid Sheet Molding Compound. PhD dissertation
Schäferling, M.
2019. Karlsruher Institut für Technologie (KIT). doi:10.5445/IR/1000093417
Influence of punch sequence and prediction of wrinkling in textile forming with a multi-punch tool
Coutandin, S.; Brandt, D.; Heinemann, P.; Ruhland, P.; Fleischer, J.
2018. Production Engineering, 12 (6), 779–788. doi:10.1007/s11740-018-0845-9
Local order scheduling for mixed-model assembly lines in the aircraft manufacturing industry
Buergin, J.; Helming, S.; Andreas, J.; Blaettchen, P.; Schweizer, Y.; Bitte, F.; Haefner, B.; Lanza, G.
2018. Production Engineering, 12 (6), 759–767. doi:10.1007/s11740-018-0852-x
Iterative Produktentwicklung und Produktionsplanung für die Additive Fertigung
Jacob, A.; Künneke, T.; Lieneke, T.; Baumann, T.; Stricker, N.; Zimmer, D.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (11), 742–745. doi:10.3139/104.112005
The Smart Battery Maker – a concept for automated flexible and agile production of cells
Storz, T.; Altvater, A.; Hofmann, J.; Scharfer, P.; Fleischer, J.; Schabel, W.
2018, November. International Battery Production Conference (IBPC 2018), Brunswick, Germany, November 14–16, 2018
Function validation of an alternative and format flexible pouch cell packaging
Singer, R.; Weinmann, H. W.; Fleischer, J.; Smith, A.; Wiegand, O.
2018, November. International Battery Production Conference (IBPC 2018), Brunswick, Germany, November 14–16, 2018
Highly integrated machine module for single sheet stacking
Weinmann, H. W.; Fleischer, J.
2018. Tagungsband zur International Battery Production Conference (IBPC) 2018. Hrsg.: A. Kwade, 58
Challenges in conveying electrodes and new approaches to quality assurance
Bold, B.; Weinmann, H. W.; Fleischer, J.
2018. B. L. B. Prof. Arno Kwade Technische Universität Braunschweig (Ed.), Tagungsband zur International Battery Production Conference 2018 Hrsg.: Prof. Arno Kwade, Battery LabFactory Braunschweig, Technische Universität Braunschweig, 56–57
Aufbau einer modularen Produktionsanlage für hybride Faserverbundbauteile
Moll, P.; Schäfer, M.; Coutandin, S.; Fleischer, J.
2018. VDI-Z Integrierte Produktion, 11 (11), 55–58
Holistic approach for integrating customers in the design, planning, and control of global production networks
Hochdörffer, J.; Buergin, J.; Vlachou, E.; Zogopoulos, V.; Lanza, G.; Mourtzis, D.
2018. CIRP journal of manufacturing science and technology, 23, 98–107. doi:10.1016/j.cirpj.2018.07.004
3D-Print-Cloud BW - Eine offene Plattform für die gesamte Prozesskette der Additiven Fertigung
Merz, S.; Baumann, F.; Dittus, J.
2018. Additive Manufacturing : vom Fertigungsverfahren zum Produktionssystem : Tagungsband zur wbk-Herbsttagung 2018. Hrsg.: J. Fleischer; G. Lanza; V. Schulze, 108–125, Shaker Verlag
Digitalisierung bei der Produktion von Solar- und Batteriezellen
Preu, R.; Rein, S.; Zimmer, M.; Weinmann, H. W.; Hofmann, J.; Fleischer, J.
2018. Die Energiewende – smart und digital : Beiträge zur FVEE-Jahrestagung 2018. Hrsg.: FVEE ForschungsVerbund Erneuerbare Energien
Vorrichtungsfreies Fügen : Variantenflexibler Karosserierohbau in smarter Werkstattfertigung
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (10), 703–707. doi:10.37544/1436-4980-2018-10-67
Vorrichtungsfreies Fügen : Variantenflexibler Karosserierohbau in smarter Werkstattfertigung
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. VDI-Z, 160 (10), 21–24
Kalandrieren von Elektroden für Li-Ionen-Batterien – Wechselwirkungen zwischen Anlagen- und Materialparametern
Bold, B.; Fleischer, J.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (9), 571–575. doi:10.3139/104.111968
Plattformbasiertes Geschäfts-modell für rekonfigurierbare Produktionsanlagen im Leichtbau
Moll, P.; Jacob, A.; Schäfer, M.; Coutandin, S.; Fleischer, J.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (9), 580–583. doi:10.3139/104.111961
Systematic Development of a Dismantable Batter Module
Singer, R.; Broschwitz, F.; Fleischer, J.
2018. e-motive Expertenforum. Hrsg.: FVA, 50–57, FVA Forschungsvereinigung Antriebstechnik e.V
Entwicklung des vorrichtungsfreien Fügens zur Flexibilisierung des Karosserierohbaus
Kupzik, D.; Coutandin, S.; Fleischer, J.
2018. Neue Robotertechnologien in Produktion, Montage und Service. Hrsg.: J. Franke, 120–133
Surface Layer States after Manufacturing Processes - Generation and Evaluation
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2018. Efficiency, Flexibility, Integration : Wiener Produktionstechnik Kongress 2018. Hrsg.: F. Bleicher, 113–118, New Academic Press
Limits of ceramics in the 3D-MID with additively produced aluminum substrate
Gotze, E.; Postler, K.; Buschulte, S.; Zanger, F.; Schulze, V.
2018. 13th International Congress Molded Interconnect Devices (MID), Würzburg, Germany, 25-26 September 2018, 15–20, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/ICMID.2018.8527061
Automatisch zum richtigen System
Fleischer, J.; Coutandin, S. C.; Ballier, F.
2018, August 10
Zustandsüberwachung bei Kugelgewindetrieben : Integration von DMS-Sensorik in Kugelgewindetriebemuttern
Hillenbrand, J.; Spohrer, A.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7-8), 493–498
Evolutionary Optimization of the Failure Behavior of Load Introduction Elements Integrated During FRP Sandwich Structure Manufacturing
Schwennen, J.; Kalbhenn, L.; Klipfel, J.; Pfeifle, J.; Kupzik, D.; Fleischer, J.
2018. Procedia CIRP Hrsg.: Roberto Teti, Doriana M. D’Addona, 67, 410–415. doi:10.1016/j.procir.2017.12.234
3D-Print-Cloud Baden-Württemberg : Eine offene Plattform für die Prozesskette der Additiven Fertigung
Merz, S.; Maier, W.; Baumann, F.; Spiller, Q.; Möhring, H.-C.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7-8), 537–542
Fügewickeln - flexible Herstellung von Leichtbauverbindungen mit Hohlprofilen
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2018. VDI-Z, 160, 70–72
Influence of rotational speed on surface states after stream finishing
Kacaras, A.; Gibmeier, J.; Zanger, F.; Schulze, V.
2018. (P. CIRP, Ed.) 4th CIRP Conference on Surface Integrity Hrsg.: CIRP, Procedia, 71, 221–226. doi:10.1016/j.procir.2018.05.067
Additive Fertigung von endlosfaserverstärkten Kunststoffen - Eine Parameterstudie
Baumann, F.; Müller, M.; Coutandin, S.; Fleischer, J.
2018. L. B. GmbH (Ed.), Technologietag Hybrider Leichtbau, 1–2, Leichtbau BW
Modular production plants for hybrid lightweight components
Schäfer, M.; Moll, P.; Fleischer, J.
2018. 22nd Dresden International Lightweight Engineering Symposium. Hrsg.: Institut für Leichtbau und Kunststofftechnik, Technische Universität Dresden, 141–145
Development and evaluation of concepts for the removal of backing foils from prepreg for the automated production of UD reinforced SMC parts
Kupzik, D.; Ballier, F.; Lang, J.; Coutandin, S.; Fleischer, J.
2018. 18th European Conference on Composite Materials (ECCM-18) : Athens, Greece, 25-28 June 2018 /, Red Hook
A modular-based approach for Just-In-Time Specification of customer orders in the aircraft manufacturing industry
Buergin, J.; Belkadi, F.; Hupays, C.; Gupta, R. K.; Bitte, F.; Lanza, G.; Bernard, A.
2018. CIRP journal of manufacturing science and technology, 21, 61–74. doi:10.1016/j.cirpj.2018.01.003
Structure optimisation of metallic load introduction elements embedded in CFRP
Gebhardt, J.; Schwennen, J.; Lorenz, F.; Fleischer, J.
2018. Production Engineering, 12 (2), 131–140. doi:10.1007/s11740-018-0820-5
Intelligente Vorschubachsen mit Industrie 4.0-Funktionalität
Burtscher, J.; Spohrer, A.; Barton, D.; Fleischer, J.
2018. VDI-Z Integrierte Produktion, 160 (4), 42–44
Finite element optimisation for rotational moulding with a core to manufacture intrinsic hybrid FRP metal pipes
Nieschlag, J.; Ruhland, P.; Daubner, S.; Koch, S.-F.; Fleischer, J.
2018. Production Engineering, 12 (2), 239–247. doi:10.1007/s11740-017-0788-6
Die additive Fertigung als vollständige Prozesskette auf der Online Plattform 3D-Print-Cloud Baden-Württemberg
Möhring, H.-C.; Fleischer, J.; Maier, W.; Spiller, Q.; Baumann, F.; Merz, S.
2018. Fachtagung Werkstoffe und Additive Fertigung : 25.-26.04.2018, Potsdam : Tagungsband. Hrsg.: P. Hoyer, 84–89, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Predictive quality control of hybrid metal-CFRP components using information fusion
Berger, D.; Zaiß, M.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.; Pohl, M.; Günther, F.; Stommel, M.
2018. Production Engineering - Research and Development, 12 (2), 161–172. doi:10.1007/s11740-018-0816-1
Numerical and experimental investigation of manufacturing and performance of metal inserts embedded in CFRP
Muth, M.; Schwennen, J.; Bernath, A.; Seuffert, J.; Weidenmann, K. A.; Fleischer, J.; Henning, F.
2018. Production engineering, 12 (2), 141–152. doi:10.1007/s11740-018-0829-9
Analyse der Wirkzusammenhänge und Entscheidungsunterstützung für den Industrie 4.0-Methodeneinsatz
Liebrecht, C.; Zeranski, D.; Lanza, G.
2018. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 113 (1-2), 79–82. doi:10.3139/104.111851
Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter
Ballier, F.; Dmytruk, T.; Fleischer, J.
2018. T. Schüppstuhl, K. Tracht & J. Franke (Eds.), Tagungsband des 3. Kongresses Montage Handhabung Industrieroboter. Hrsg.: Thorsten Schüppstuhl, Kirsten Tracht, Jörg Franke, Springer Verlag. doi:10.1007/978-3-662-56714-2
Prozesskettensimulation: Additive Fertigung und spanende Nachbearbeitung
Gerstenmeyer, M.; Segebade, E.; Fedder, G.; Zanger, F.; Schulze, V.
2018. 19. RoundTable Simulating Manufacturing : Tagungsband : 16.-17. Mai 2018, Congresszentrum Marburg / Simufact. Hrsg.: H. Schafstall, 32–45, Simufact Engineering
Peening
Schulze, V.; Bouzakis, K.-D.; Klumpp, A.; Gerstenmeyer, M.
2018. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 1–4, Springer Verlag. doi:10.1007/978-3-642-35950-7_16856-1
Demontagegerechtes Batteriemodul
Singer, R.; Fleischer, J.
2018. ATZ - Automobiltechnische Zeitschrift, 120 (1), 100–103. doi:10.1007/s35148-017-0167-9
8th Conference on Industrial Computed Tomography (iCT) 2018, 6-9 Feb, Wels, Austria (iCT 2018)
Research Group "Computed Tomography" at the University of Applied Sciences Upper Austria (Ed.)
2018. NDT.net
Development of an agile development method based on Kanban for distributed part-time teams and an introduction framework
Hofmann, C.; Lauber, S.; Haefner, B.; Lanza, G.
2018. (D. Mourtzis & G. Chryssolouris, Eds.) Advanced Engineering Education & Training for Manufacturing Innovation Hrsg.: Mourtzis, Dimitris; Chryssolouris, George, 23, 45–50. doi:10.1016/j.promfg.2018.03.159
The Impact of Routing and Operation Flexibility on the Performance of Matrix Production Compared to a Production Line
Hofmann, C.; Brakemeier, N.; Krahe, C.; Stricker, N.; Lanza, G.
2018. R. Schmitt & G. Schuh (Eds.), Advances in Production Research Hrsg.: Schmitt, Robert; Schuh, Günther, 155–165, Springer International Publishing. doi:10.1007/978-3-030-03451-1_16
International Symposium on Structural Health Monitoring and Nondestructive Testing 2018
htw saar | University of Applied Sciences (Ed.)
2018. NDT.net
Planning, Evaluation and Optimization of Product Design and Manufacturing Technology Chains for New Product and Production Technologies on the Example of Additive Manufacturing
Jacob, A.; Windhuber, K.; Ranke, D.; Lanza, G.
2018. (F. Laroche & A. Bernard, Eds.) 28th CIRP Design Conference 2018 Hrsg.: Laroche, Florent; Bernard, Alain, 70, 108–113. doi:10.1016/j.procir.2018.02.049
Auf dem Weg zum Digitalen Shopfloor Management: Eine Studie zum Stand der Echtzeitentscheidungsfähigkeit und des Industrie 4.0-Reifegrads
Lanza, G.; Hofmann, C.; Stricker, N.; Biehl, E.; Braun, Y.
2018. Karlsruher Institut für Technologie (KIT)
Wandlungsfähige, menschenzentrierte Strukturen in Fabriken und Netzwerken der Industrie 4.0 (acatech Studie)
Lanza, G.; Nyhuis, P.; Fisel, J.; Jacob, A.; Nielsen, L.; Schmidt, M.; Stricker, N.
2018. Utz
16th IFAC Symposium on Information Control Problems in Manufacturing INCOM 2018
Macchi, M.; Monostori, L.; Pinto, R. (Eds.)
2018. International Federation of Automatic Control (IFAC)
28th CIRP Design Conference 2018
Laroche, F.; Bernard, A. (Eds.)
2018. Elsevier
Data Fusion for Quality Assurance of fibre-reinforced plastic
Schäferling, M.; Berger, D.; Haefner, B.; Lanza, G.
2018. International Symposium on Structural Health Monitoring and Nondestructive Testing 2018 Hrsg.: htw saar | University of Applied Sciences, 1–9, NDT.net
10th CIRP Conference on Industrial Product-Service Systems, IPS2 2018, 29-31 May 2018, Linköping, Sweden
Sakao, T.; Lindahl, M.; Liu, Y.; Dalhammar, C. (Eds.)
2018. Elsevier B.V
51st CIRP Conference on Manufacturing Systems
Wang, L. (Ed.)
2018. Elsevier B.V
Informationsfusion für die vollständige Qualitätssicherung von faserverstärkten Kunststoffen
Zaiß, M.; Haefner, B.; Lanza, G.
2018. 2. VDI-Fachtagung Multisensorik in der Fertigungsmesstechnik 2018. Hrsg.: VDI/VDE-Gesellschaft Mess- und Automatisierungstechnik, 173–184, VDI Verlag
A Method for Improving Production Management Training by Integrating an Industry 4.0 Innovation Center in China
Yang, S.; Hamann, K.; Haefner, B.; Wu, C.; Lanza, G.
2018. Procedia manufacturing, 23, 213–218. doi:10.1016/j.promfg.2018.04.019
Variant flexibility in assembly line balancing under the premise of feasibility robustness
Fisel, J.; Exner, Y.; Stricker, N.; Lanza, G.
2018. Procedia CIRP, 72, 774–779. doi:10.1016/j.procir.2018.03.049
CIRP Winter Meetings 2018
CIRP - The International Academy for Production Engineering (Ed.)
2018
Knowledge Based User Support for Computed Tomography Measurements
Schild, L.; Haefner, B.; Lanza, G.
2018. Advances in Production Research. Ed.: R. Schmitt, 667–678, Springer. doi:10.1007/978-3-030-03451-1_65
Influence of surface roughness on measurement uncertainty in Computed Tomography
Schild, L.; Kraemer, A.; Reiling, D.; Wu, H.; Lanza, G.
2018. 8th Conference on Industrial Computed Tomography (iCT) 2018. Ed.:, 1–8
Bahnzugkraftregelung in der Batteriezellfertigung, Web tension control in battery cell production
Weinmann, H. W.; Lang, F.; Hofmann, J.; Fleischer, J.
2018. wt Werkstattstechnik online, 108 (7/8), 519–524
Adjustement of cryogenic cooling in titanium machining by controlling the nitrogen flow
Stampfer, B.; Golda, P.; Zanger, F.; Schießl, R.; Maas, U.; Schulze, V.
2018. 68th CIRP General Assembly, International Academy for Production Engineering (2018), Tokyo, Japan, August 19–25, 2018
Surface texturing of TiAl6V4 using cutting tools in reverse
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia manufacturing, 18, 97–103. doi:10.1016/j.promfg.2018.11.013
Influence of cutting edge asymmetry on grain refinement of Ti6Al4V
Segebade, E.; Kümmel, D.; Zanger, F.; Schneider, J.; Schulze, V.
2018. Procedia CIRP, 71, 232–237. doi:10.1016/j.procir.2018.05.065
Influence of Complementary Machining on fatigue strength of AISI 4140
Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2018. CIRP annals, manufacturing technology, 67 (1), 583–586. doi:10.1016/j.cirp.2018.04.103
Reinforcement learning for adaptive order dispatching in the semiconductor industry
Stricker, N.; Kuhnle, A.; Sturm, R.; Friess, S.
2018. CIRP annals, manufacturing technology, 67 (1), 511–514. doi:10.1016/j.cirp.2018.04.041
Cost-oriented planning of equipment for selective laser melting (SLM) in production lines
Kopf, R.; Gottwald, J.; Jacob, A.; Brandt, M.; Lanza, G.
2018. CIRP annals, manufacturing technology, 67 (1), 471–474. doi:10.1016/j.cirp.2018.04.032
Order allocation and sequencing with variable degree of uncertainty in aircraft manufacturing
Urgo, M.; Buergin, J.; Tolio, T.; Lanza, G.
2018. CIRP annals, manufacturing technology, 67 (1), 431–436. doi:10.1016/j.cirp.2018.04.038
Additive manufacturing of metal components with the ARBURG plastic freeforming process
Spiller, Q.; Fleischer, J.
2018. CIRP annals, manufacturing technology, 67 (1), 225–228. doi:10.1016/j.cirp.2018.04.104
Composite materials parts manufacturing
Fleischer, J.; Teti, R.; Lanza, G.; Mativenga, P.; Möhring, H.-C.; Caggiano, A.
2018. CIRP annals, manufacturing technology, 67 (2), 603–626. doi:10.1016/j.cirp.2018.05.005
Optimum selection of variable pitch for chatter suppression in face milling operations
Iglesias, A.; Dombovari, Z.; Gonzalez, G.; Munoa, J.; Stepan, G.
2018. Materials, 12 (1), Art. Nr.: 112. doi:10.3390/ma12010112
An Electromechanical Co-Simulation Model Based on Lumped Parameter Model of Ball Screw Feed Drive System
Luo, L.; Zhang, W.; Sui, H.; Fleischer, J.
2018. 3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018; Phuket; Thailand; 27 September 2018 through 29 September 2018. Ed.: R. Das, Art. Nr.: 03007, EDP Sciences. doi:10.1051/matecconf/201823703007
A solid-analytical-based model for extracting cutter-workpiece engagement in 5-axis flank machining
Li, D.; Zhang, W.; Shang, T.; Gao, T.; Liu, S.; Fleischer, J.
2018. 3rd International Conference on Design, Mechanical and Material Engineering, D2ME 2018; Phuket; Thailand; 27 September 2018 through 29 September 2018. Ed.: R. Das, Art. Nr.: 01009, EDP Sciences. doi:10.1051/matecconf/201823701009
Knowing Me, Knowing You: Biosignals and Trust in the Surveillance Economy
Peukert, C.; Adam, M. T. P.; Hawlitschek, F.; Helming, S.; Lux, E.; Teubner, T.
2018. Proceedings of the Thirty Ninth International Conference on Information Systems, ICIS 2018, 1–9
Dual NURBS Path Smoothing for 5-Axis Linear Path of Flank Milling
Li, D.; Zhang, W.; Zhou, W.; Shang, T.; Fleischer, J.
2018. International journal of precision engineering and manufacturing, 19 (12), 1811–1820. doi:10.1007/s12541-018-0209-6
Analysis of Interactions and Support of Decision Making for the Implementation of Manufacturing Systems 4.0 Methods
Liebrecht, C.; Schaumann, S.; Zeranski, D.; Antoszkiewicz, A.; Lanza, G.
2018. Procedia CIRP, 73, 161–166. doi:10.1016/j.procir.2018.04.005
Live biofeedback as a user interface design element: A review of the literature
Lux, E.; Dorner, V.; Knierim, M. T.; Adam, M. T. P.; Helming, S.; Weinhardt, C.
2018. Communications of the Association for Information Systems, 43 (1), 257–296. doi:10.17705/1CAIS.04318
Applying User Stories for a customer-driven Industry 4.0 Transformation
Lorenz, R.; Lorentzen, K.; Stricker, N.; Lanza, G.
2018. IFAC-PapersOnLine, 51 (11), 1335–1340. doi:10.1016/j.ifacol.2018.08.345
Self-describing connected components for live information access within production systems
Barton, D.; Gönnheimer, P.; Qu, C.; Fleischer, J.
2018. Procedia manufacturing, 24, 250–257. doi:10.1016/j.promfg.2018.06.031
Filament winding for automated joining of lightweight profiles
Dackweiler, M.; Coutandin, S.; Fleischer, J.
2018. JEC Composites Magazine, 55 (122), 25–26
Development and evaluation of separation concepts for the controllable release of tacky prepreg from handling devices
Kupzik, D.; Ballier, F.; Roller, T.; Coutandin, S.; Fleischer, J.
2018. 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018; Stockholm Waterfront Congress CentreStockholm; Sweden; 16 May 2018 through 18 May 2018. Ed.: T. Kjellberg, 574–579, Elsevier. doi:10.1016/j.procir.2018.03.162
FEM simulation and acoustic emission based characterization of chip segmentation frequency in machining of Ti-6Al-4V
Zanger, F.; Kacaras, A.; Bächle, M.; Schwabe, M.; Puente León, F.; Schulze, V.
2018. 51st CIRP Conference on Manufacturing Systems, CIRP CMS 2018; Stockholm Waterfront Congress CentreStockholm; Sweden; 16 May 2018 through 18 May 2018. Ed.: T. Kjellberg, 1421–1426, Elsevier. doi:10.1016/j.procir.2018.03.196
Tribological Effects in and by Metal Cutting
Segebade, E.; Schneider, J.; Schulze, V.
2018. 8th International Conference on Tribology in Manufacturing Processes and Joining by Plastic Deformation, ICTMP 2018; Elsinore; Denmark; 24 June 2018 through 26 June 2018. Ed.: N. Bay, 3–24, Trans Tech Publications. doi:10.4028/www.scientific.net/KEM.767.3
Gathering, evaluating and managing customer feedback during aircraft production
Gupta, R. K.; Belkadi, F.; Buergy, C.; Bitte, F.; Da Cunha, C.; Buergin, J.; Lanza, G.; Bernard, A.
2018. Computers & industrial engineering, 115, 559–572. doi:10.1016/j.cie.2017.12.012
Staff scheduling in job rotation environments considering ergonomic aspects and preservation of qualifications
Hochdörffer, J.; Hedler, M.; Lanza, G.
2018. Journal of manufacturing systems, 46, 103–114. doi:10.1016/j.jmsy.2017.11.005
Kostenorientierte Planung von Fertigungsfolgen additiver Technologien. PhD dissertation
Kopf, R.
2018. Shaker Verlag
Experimental and numerical investigations of wire bending by linear winding of rectangular tooth coils
Komodromos, A.; Tekkaya, A. E.; Hofmann, J.; Fleischer, J.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 150007, American Institute of Physics (AIP). doi:10.1063/1.5035014
Orthogonal cutting of laser beam melted parts
Götze, E.; Zanger, F.; Schulze, V.
2018. Proceedings of the 21st International ESAFORM Conference on Material Forming : ESAFORM 2018 : Palermo, Italy, 23-25 April 2018. Ed.: L. Fratini, Art.Nr. 070023. doi:10.1063/1.5034919
Product variety management using data-mining methods : Reducing planning complexity by applying clustering analysis on product portfolios
Hochdörffer, J.; Laule, C.; Lanza, G.
2018. 2017 IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Singapore, 10th - 13th December 2017, 593–597, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM.2017.8289960
Investigations on the tensile force at the multi-wire needle winding process
Hofmann, J.; Bold, B.; Baum, C.; Fleischer, J.
2017. 7th International Electric Drives Production Conference (EDPC), Article no: 8328142, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2017.8328142
Dynamische Parameteranpassung bei der Mikrozerspanung von 20MnCr5
Gabsch, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 149–154, Verlag BIAS
Alternativer Herstellprozess von Batteriegehäusen
Singer, R.; Fleischer, J.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 112 (9), 580–583. doi:10.3139/104.111777
Experimentelle Untersuchung des ARBURG Kunststoff-Freiformens zur Herstellung metallischer Bauteile
Spiller, Q.; Fleischer, J.
2017. Deutsche Gesellschaft für Materialkunde (Ed.), WW WerkstoffWoche : 27.-29.09.2017, Dresden, 10–14, Deutsche Gesellschaft für Materialkunde e.V. (DGM)
Mechanical surface modification using cutting inserts
Segebade, E.; Klose, J.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. I. S. C. for Shot Peening (Ed.), ICSP13 : 13th International Conference on Shot Peening : 18-21 September 2017, Montréal, Canada / organizing institution: Polytechnique Montréal: Proceedings, 219–224, [Verlag nicht ermittelbar]
Modular production plant for hybrid high performance components
Joppich, T.; Kilian, S.; Moll, P.; Schäfer, M.
2017. Composites Germany - Carbon Composites e. V. (Ed.), ICC - Lightweight Technologies Forum, 18.9.-19.9.2017, Stuttgart. Hrsg.: Composites Germany - Carbon Composites e. V
Simulative Betrachtung von Prozessketten in der Fertigung
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. massivUmformung, 2017, 56–59
Ressourceneffizienter Kugelgewindetrieb durch adaptive Schmierung
Spohrer, A.; Leitold, L.; Straub, F.; Hillenbrand, J.; Fleischer, J.
2017. Reibung, Schmierung und Verschleiß : Forschung und praktische Anwendungen : 58. Tribologie-Fachtagung, 25. September bis 27. September 2017 in Göttingen, 39–49, Gesellschaft für Tribologie e.V. (GfT)
Entwicklung eines serienflexiblen Wickelverfahrens
Peter, M.; Halwas, M.; Schigal, W.; Fleischer, J.
2017. Forschungsvereinigung Antriebstechnik e.V. (FVA) (Ed.), Industrie und Forschung im Zukunftsdialog : E-MOTIVE : 9. Expertenforum Elektrische Fahrzeugantriebe : 5. und 6. September 2017 in Hannover / FVA, FVV, VDMA ; Tagungsleitung: Alexander Raßmann, 91–94, Forschungsvereinigung Antriebstechnik (FVA)
Kombination etablierter und additiver Fertigung – Wirtschaftlicher Einsatz des Laser-Strahlschmelzens (LBM) durch die Kombination mit etablierten Fertigungsverfahren in einer Prozesskett
Eschner, N.; Kopf, R.; Lieneke, T.; Künneke, T.; Berger, D.; Häfner, B.; Lanza, G.; Zimmer, D.
2017. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (7-8), 469–472. doi:10.3139/104.111751
Function-oriented measurements and uncertainty evaluation of micro-gears for lifetime prognosis
Haefner, B.; Lanza, G.
2017. CIRP annals, manufacturing technology, 66 (1), 475–478. doi:10.1016/j.cirp.2017.04.065
Comparison of Modeling Methods to Determine Cutting Tool Profile for Conventional and Synchronized Whirling
Zanger, F.; Sellmeier, V.; Klose, J.; Bartkowiak, M.; Schulze, V.
2017. Procedia CIRP, 58, 222–227. doi:10.1016/j.procir.2017.03.216
Vorrichtungsfreies Fügen in smarten Rohbauzellen
Kupzik, D.
2017. Handling, 6, 36–37
Development of a calculation model for load introduction elements integrated during frp sandwich structure manufacturing
Schwennen, J.; Kupzik, D.; Fleischer, J.
2017. K. Blohkowiak (Ed.), SAMPE Seattle 2017 : conference: May 22-25, 2017, exhibition: May 23-24, 2017, Washington State Convention Center, Seattle, Washington. Hrsg.: Kay Blohkowiak, 969–983, Society for the Advancement of Material and Process Engineering (SAMPE)
Effiziente Herstellung hybrider Bauteile durch rekonfigurierbare Fertigungsanlagen
Schäfer, M.; Moll, P.
2017. L. L. Baden-Württemberg (Ed.), 4. Technologietag Hybrider Leichtbau, 30. Mai 2017, Stuttgart
Prüfmethoden für Tiefziehfehler
Singer, R.; Menken, L.; Weber, M.; Fleischer, J.
2017. Umformtechnik, 4, 16–17
Vernetzte Anlagen für die spanende Fertigung
Fleischer, J.; Gaub, H.; Lang, H.; Klaiber, M.; Schöning, S.; Rothaupt, B.
2017. Handbuch Industrie 4.0 – Geschäftsmodelle, Prozesse, Technik. Verfass. eines Vorworts: Gunther Reinhart, 585–604, Carl Hanser Verlag. doi:10.3139/9783446449893.020
Drahtschwingungen beim Linearspulenwickeln
Hofmann, J.; Flohr, L.; Kistner, J.; Fleischer, J.
2017. Draht, 2, 1
Influences of separation and joining processes on single tooth laminated stacks
Kraemer, A.; Veigel, M.; Pontner, P.; Doppelbauer, M.; Lanza, G.
2017. 6th International Conference Electric Drives Production (E/DPC), November 30th - December 1st, 2016, Nuremberg, Germany : Proceedings. Ed.: IEEE, 178–185, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851331
Asymmetrische Schneidkantenmikrogeometrien - Bedeutung, Charakterisierung, potenzielle Anwendungen und Herausforderungen
Segebade, E.; Zanger, F.; Schulze, V.
2017. Spanende Fertigung. Hrsg.: Dirk Biermann, 79–86, Vulkan-Verlag
Simulative Investigations on Different Friction Coefficient Models
Zanger, F.; Bollig, P.; Schulze, V.
2017. (Elsevier, Ed.) Procedia CIRP, 58, 140–145. doi:10.1016/j.procir.2017.03.203
Erweiterung des ARBURG Kunststoff-Freiformens zur Herstellung metallischer Bauteile
Spiller, Q.; Fleischer, J.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 55–61, Verlag BIAS
Process Analysis and Development of a Module for Implementing Continuous Fibres in an Additive Manufacturing Process
Baumann, F.; Sielaff, L.; Fleischer, J.
2017. SAMPE Europe Symposium 2017, 14.-16.11.2017, Stuttgart, 1–8
Automated local reinforcing of glass fiber-injection molded preforms with carbon fiber tapes
Dackweiler, M.; Fleischer, J.
2017. 15th Japan International SAMPE Symposium and Exhibition, 27th-29th November 2017, Tokyo
Optimierung der Aktivlotzusammensetzung für Al2O3 und Herstellung von innenliegenden Leiterbahnen
Götze, E.; Heinzel, Y.; Matuschka, B.; Zanger, F.; Schulze, V.; Rohde, M.; Krügelstein, A.; Franke, J.
2017. F. Vollertsen (Ed.), 8. Kolloquium Mikroproduktion : Fachbeiträge, Bremen, 27.-28. November 2017 / Hrsg.: F. Vollertsen, 129–134, Verlag BIAS
Finish machining of laser beam melted parts
Götze, E.; Zanger, F.; Schulze, V.
2017. Proceedings of the Special Interest Group Meeting on Dimensional Accuracy and Surface Finish in Additive Manufacturing : October 10-11, 2017, Leuven, BE. Ed.: W. Dewulf, 99–103, European Society for Precision Engineering and Nanotechnology (euspen)
Variantenanalyse zur Effizienzsteigerung beim Wirbeln mit synchronem Drehen
Klotz, S.; Klose, J.; Sellmeier, V.; Schulze, V.
2017. B. Denkena (Ed.), PIA - Prozessketten im Automobilbau. Hrsg.: Berend Denkena, 121–129
Bessere Schneidkanten durch optische 3D-Messtechnik
Schulz, V.; Klotz, S.; Rees, E.
2017. Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnolgie, 2019. Hrsg.: Bahman Azarhoushang, Hochschule Furtwangen
Randschichtzustände nach Fertigungsprozessen ? Erzeugung und Bewertung
Schulze, V.; Zanger, F.; Bollig, P.; Segebade, E.; Gerstenmeyer, M.; Klotz, S.
2017. Moderne Zerspanungstechnologie : neue Entwicklungen und Trends aus Forschung und Praxis : Jahrbuch zum 3. Innovation Forum Zerspanungstechnolgie, 2019. Hrsg.: Bahman Azarhoushang, Hochschule Furtwangen
Highly Integrated Self-compensating Hydraulic Feed Axis for Small Machine Tools
Bauer, J.; Klee, B.; Fleischer, J.
2017. Small machine tools for small workpieces : final report of the DFG priority program 1476. Ed.: Jens Peter Wulfsberg, Adam Sanders, editors, 103–116, Springer
Zerspanungssimulation mit Simufact Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth & H. Schafstall (Eds.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Congresszentrum Marburg. Hrsg.: Michael Wohlmuth, Hendrik Schafstall, 116–127, Simufact Engineering GmbH
Simulation der mechanischen Oberflächenbehandlung mit Simufact Forming
Gerstenmeyer, M.; Segebade, E.; Zanger, F.; Schulze, V.
2017. M. Wohlmuth (Ed.), 18. RoundTable Simulating Manufacturing : Tagungsband : 30. Mai-1. Juni 2017, Marburg. Hrsg.: Hendrik Schafstall, 180–189, Simufact Engineering GmbH
Signifikant Leistungsfähiger - synchroner Drehwirbel-Prozess
Klotz, S.; Zanger, F.; Sellmeier, V.; Schulze, V.
2017. Werkstatt und Betrieb, 2016, 62–65
Metallographische Untersuchung von Randschichten bei der Zerspanung
Ohl, A.; Kümmel, J.; Poser, K.; Schulze, V.; Wanner, A.
2017. Fortschritte in der Metallographie : Vortragstexte der 51. Metallographie-Tagung, 13.-15. September 2017 in Aalen. Mitwirkender: Timo Bernthaler, 319–324, Inventum GmbH
Plastic Deformation: Constitutive Description
Schulze, V.; Vöhringer, O.; Halle, T.
2017. Reference module in materials science and materials engineering. Ed.: Saleem Hashmi, 1–17, Elsevier. doi:10.1016/B978-0-12-803581-8.02883-6
Produktion alternativer Pouchzellengehäuse
Singer, R.; Bakozahos, A.; Fleischer, J.
2017. M. Krausa (Ed.), Batterieforum Deutschland - Posterabstracts und Projektvorstellungen. Hrsg.: M. Krausa, 120, Kompetenznetzwerk Lithium-Ionen-Batterien (KLiB)
Quo Vadis Wickeltechnik?
Fleischer, J.; Haag, S.; Hofmann, J.
2017. wbk Institut für Produktionstechnik. doi:10.5445/IR/1000147078
Intelligente Produktionsplanung und -steuerung - Erlernen optimaler Entscheidungen
Kuhnle, A.; Kuttler, M.; Duempelmann, M.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (9), 625–629
Steuerung globaler Produktionsnetzwerke: Entwicklung eines Standortrollenmodells zur dynamischen Bewertung von Gestaltungsmaßnahmen
Arndt, T.; Lemmerer, C.; Biegler, C.; Sihn, W.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (4), 241–246
Vorgehensmodell zur Einführung von Industrie 4.0: Vorstellung eines Vorgehensmodells zur bedarfsgerechten Einführung von Industrie 4.0-Methoden
Huebner, M.; Liebrecht, C.; Malessa, N.; Kuhnle, A.; Nyhuis, P.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (4), 266–272
2017 IEEE International Conference on Industrial Engineering & Engineering Management: IEEE IEEM2017 : 10-13 Dec, Singapore
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2017. Institute of Electrical and Electronics Engineers (IEEE)
Laser-Strahlschmelzen - Technologie mit Zukunftspotenzial: Ein Handlungsleitfaden
Lanza, G.; Kopf, R.; Zaiß, M.; Stricker, N.; Eschner, N.; Jacob, A.; Yang, S.; Schönle, A.; Webersinke, L.; Wirsig, L.
2017. wbk Institut für Produktionstechnik
A three-step transformation process for the implementation of Manufacturing Systems 4.0 in medium-sized enterprises
Liebrecht, C.; Schwind, J.; Grahm, M.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen 2017 Hrsg.: Schmitt, Robert; Schuh, Günther, 251–261, Apprimus Wissenschaftsverlag
Multi-criteria Evaluation of Manufacturing Systems 4.0 under Uncertainty
Liebrecht, C.; Jacob, A.; Kuhnle, A.; Lanza, G.
2017. (M. M. Tseng, H.-Y. Tsai & Y. Wang, Eds.) Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems Hrsg.: Tseng, Mitchell M.; Tsai, Hung-Yin; Wang, Yue, 63, 224–229. doi:10.1016/j.procir.2017.03.147
A Portfolio Theory Approach to Identify Risk-efficient Enablers of Change in Global Production Networks
Moser, E.; Huss, A. K.; Liebrecht, C.; Lanza, G.
2017. (M. M. Tseng, H.-Y. Tsai & Y. Wang, Eds.) Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems Hrsg.: Tseng, Mitchell M.; Tsai, Hung-Yin; Wang, Yue, 63, 768–773. doi:10.1016/j.procir.2017.03.273
7th Conference on Learning Factories (CLF) 2017
Metternich, J.; Glass, R. (Eds.)
2017. Elsevier
Entwicklungsstrukturen intrinsischer Hybride: Von der Entwicklung über die Produkton zur Schadenscharakterisierung
Pohl, M.; Stommel, M.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.
2017. wt Werkstattstechnik online, 107 (7-8), 546–550
Optimising Matching Strategies for High Precision Products by Functional Models and Machine Learning Algorithms
Wagner, R.; Kuhnle, A.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017. Hrsg: Robert Schmitt, 231–239, Apprimus Wissenschaftsverlag
The 24th CIRP Conference on Life Cycle Engineering
Takata, S.; Umeda, Y.; Kondoh, S. (Eds.)
2017. Elsevier
Changeability Focused Planning Method for Multi Model Assembly Systems in Automotive Industry
Fisel, J.; Arslan, A.; Lanza, G.
2017. M. M. Tseng, H.-Y. Tsai & Y. Wang (Eds.), Manufacturing Systems 4.0 - Proceedings of the 50th CIRP Conference on Manfacturing Systems. Hrsg.: Mitchell M. Tseng, 515–520, Elsevier. doi:10.1016/j.procir.2017.03.148
Prozessüberwachung beim Laser-Strahlschmelzen mit akustischen Signalen
Eschner, N.; Lingenhöhl, J.; Oeppling, S.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (11-12), 818–823
Maschinelles Lernen in der PPS: Konzept für den Einsatz von maschinellem Lernen für eine Matrix-Produktion
Echsler Minguillon, F.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (9), 630–634
7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017
Schmitt, R.; Schuh, G. (Eds.)
2017. Apprimus Wissenschaftsverlag
Scalable assembly for fuel cell production
Staehr, T.; Ungermann, F.; Lanza, G.
2017. R. Schmitt & G. Schuh (Eds.), 7. WGP-Jahreskongress Aachen, 5.-6. Oktober 2017. Hrsg.: Robert Schmitt, 303–311, Apprimus Wissenschaftsverlag
Ausfallanalyse von Werkzeugmaschinen: Total Cost of Ownership 2.0 in Bezug auf den Anwendungsfall
Staehr, T.; Lanza, G.
2017. wt Werkstattstechnik online, 107 (7-8), 507–510
Automated calibration of a lightweight robot using machine vision
Barton, D.; Schwab, J.; Fleischer, J.
2017. 7. WGP-Jahreskongress Aachen, 5.–6. Oktober 2017. Hrsg.: R.H. Schmitt, 321–328, Apprimus Wissenschaftsverlag
SecurePLUGandWORK – Abschlussbericht
Schleipen, M.; Henßen, R.; Bischoff, T.; Pfrommer, J.; Sauer, O.; Schneider, D.; Jungbluth, F.; Flatt, H.; Barton, D.; Fleischer, J.; Bollhöfer, E.; Moll, C.; Lindauer, J.; Davis, R.; Baron, H.; Danner, T.; Hillerich, T.; Schmuck, C.; Blume, M.; Finster, S.; Fechner, A.; Tschepat, R.; Kazakov, D.; Kühbauch, R.; Klöblen, W.; Sproll, D.; Fellhauer, B.; Osswald, D.
2017. doi:10.5445/IR/1000133278
Challenges of high Quality and high Performance Cell Stacking
Fleischer, J.
2017. Advanced Automotive Battery Conference (AABC), Mainz, January 30 - February 2, 2017
Microstructural and hardness changes in aluminum alloy Al-7075 : Correlating machining and equal channel angular pressing
Imbrogno, S.; Umbrello, D.; Segebade, E.; Fellmeth, A.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Proceedings of the 20th International ESAFORM Conference on Material Forming, ESAFORM 2017, Ireland, Dublin, 26th - 28th April 2017, American Institute of Physics (AIP). doi:10.1063/1.5008112
Entwicklungsstrukturen intrinsischer Hybride : Von der Entwicklung über die Produktion zur Schadenscharakterisierung = Development structures for intrinsic hybrids
Pohl, M.; Stommel, M.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.
2017. wt Werkstattstechnik online, 107 (7-8), 546–550
Industrie 4.0 neue Antworten auf die Fragen der Produktion von morgen
Fleischer, J.
2017. wt Werkstattstechnik online, 107 (7-8), 479
Cutting Simulations Using a Commercially Available 2D/3D FEM Software for Forming
Segebade, E.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 73–78. doi:10.1016/j.procir.2017.03.195
Kinematic Hardening of AISI 5120 during Machining Operations
Fellmeth, A.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 58, 104–109. doi:10.1016/j.procir.2017.03.201
Gewinde-Wirbeln und Fräsen schwer zerspanbarer Werkstoffe = Efficient thread whirling and milling of difficult-to-cut materials
Schulze, V.; Sellmeier, V.; Abele, E.; Kannwischer, M.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (7-8), 443–446. doi:10.3139/104.111755
Characterisation and Optimization of in-process Eddy Current Sensor Arrays Using Computed Tomography
Berger, D.; Will, T.; Töpper, H. C.; Lanza, G.; Koster, D.; Herrmann, H. G.
2017. Procedia CIRP, 66, 243–248. doi:10.1016/j.procir.2017.03.363
Manufacturing of Textile Preforms with an Intelligent Draping and Gripping System
Förster, F.; Ballier, F.; Coutandin, S.; Defranceski, A.; Fleischer, J.
2017. Procedia CIRP, 66, 39–44. doi:10.1016/j.procir.2017.03.370
Machinability of Continuous-Discontinuous Long Fiber Reinforced Polymer Structures
Helfrich, A.; Klotz, S.; Zanger, F.; Schulze, V.
2017. Procedia CIRP, 66, 193–198. doi:10.1016/j.procir.2017.03.366
New Concepts for Quality Assurance of Lightweight Material
Zaiß, M.; Demmerle, J.; Oergele, J.-N.; Lanza, G.
2017. Procedia CIRP, 66, 259–264. doi:10.1016/j.procir.2017.03.224
Fluid elements in machine tools
Wegener, K.; Mayr, J.; Merklein, M.; Behrens, B.-A.; Aoyama, T.; Sulitka, M.; Fleischer, J.; Groche, P.; Kaftanoglu, B.; Jochum, N.; Möhring, H.-C.
2017. CIRP annals, manufacturing technology, 66 (2), 611–634. doi:10.1016/j.cirp.2017.05.008
Innovative control of assembly systems and lines
Krüger, J.; Wang, L.; Verl, A.; Bauernhansl, T.; Carpanzano, E.; Makris, S.; Fleischer, J.; Reinhart, G.; Franke, J.; Pellegrinelli, S.
2017. CIRP annals, manufacturing technology, 66 (2), 707–730. doi:10.1016/j.cirp.2017.05.010
Advances in material and friction data for modelling of metal machining
Melkote, S. N.; Grzesik, W.; Outeiro, J.; Rech, J.; Schulze, V.; Attia, H.; Arrazola, P.-J.; M’Saoubi, R.; Saldana, C.
2017. CIRP annals, manufacturing technology, 66 (2), 731–754. doi:10.1016/j.cirp.2017.05.002
Concept Development for the Verification of the Didactic Competence Promotion for the Learning Factory on Global Production
Liebrecht, C.; Hochdörffer, J.; Treber, S.; Moser, E.; Erbacher, T.; Gidion, G.; Lanza, G.
2017. Procedia manufacturing, 9, 315–322. doi:10.1016/j.promfg.2017.04.019
Demonstration of a Concept for Scalable Automation of Assembly Systems in a Learning Factory
Buergin, J.; Minguillon, F. E.; Wehrle, F.; Haefner, B.; Lanza, G.
2017. Procedia manufacturing, 9, 33–40. doi:10.1016/j.promfg.2017.04.026
Use of Thermography and Ultrasound for the Quality Control of SMC Lightweight Material Reinforced by Carbon Fiber Tapes
Zaiß, M.; Jank, M.-H.; Netzelmann, U.; Waschkies, T.; Rabe, U.; Herrmann, H.-G.; Thompson, M.; Lanza, G.
2017. Procedia CIRP, 62, 33 – 38. doi:10.1016/j.procir.2016.06.039
Aktive Gestaltung globaler Produktionsnetzwerke = Active Design of Production Networks
Friedli, T.; Lanza, G.; Schuh, G.; Treber, S.; Wiech, M.; Gützlaff, A.
2017. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 112 (5), 279–283. doi:10.3139/104.111716
Generation of Planned Orders and their Matching with Customer Orders in Multi-variant Series Production
Buergin, J.; Beisecker, J.; Fischer, S.; Geier, B.; Tutsch, H.; Mercamp, S.; Lanza, G.
2017. Procedia CIRP, 61, 499–504. doi:10.1016/j.procir.2016.11.159
Web-based Component Data for the Commissioning of Machine Tools
Klee, B.; Bauer, J.; Jiang, H.; Fleischer, J.
2017. Procedia CIRP, 61, 329–334. doi:10.1016/j.procir.2016.11.145
Identification of an optimal cutting edge microgeometry for Complementary Machining
Zanger, F.; Gerstenmeyer, M.; Weule, H.
2017. CIRP annals, manufacturing technology, 66 (1), 81–84. doi:10.1016/j.cirp.2017.04.026
Qualification of the stream finishing process for surface modification
Schulze, V.; Gibmeier, J.; Kacaras, A.
2017. CIRP annals, manufacturing technology, 66 (1), 523–526. doi:10.1016/j.cirp.2017.04.079
Adaptive tuned mass damper with variable mass for chatter avoidance
Burtscher, J.; Fleischer, J.
2017. CIRP annals, manufacturing technology, 66 (1), 397–400. doi:10.1016/j.cirp.2017.04.059
Numerical investigation of the ignition of diethyl ether/air and propane/air mixtures by hot jets
Fischer, S.; Markus, D.; Maas, U.
2017. Journal of loss prevention in the process industries, 49 (Part B), 832–838. doi:10.1016/j.jlp.2017.03.010
Considering Interdependencies of KPIs – Possible Resource Efficiency and Effectiveness Improvements
Stricker, N.; Micali, M.; Dornfeld, D.; Lanza, G.
2017. Procedia manufacturing, 8, 300–307. doi:10.1016/j.promfg.2017.02.038
Selecting key performance indicators for production with a linear programming approach
Stricker, N.; Echsler Minguillon, F.; Lanza, G.
2017. International journal of production research, 55 (19), 5537–5549. doi:10.1080/00207543.2017.1287444
Effects of defects in series production of hybrid CFRP lightweight components – detection and evaluation of quality critical characteristics
Berger, D.; Brabandt, D.; Bakir, C.; Hornung, T.; Lanza, G.; Summa, J.; Schwarz, M.; Herrmann, H.-G.; Pohl, M.; Stommel, M.
2017. Measurement, 95, 389–394. doi:10.1016/j.measurement.2016.10.003
Umformtechnik beseitigt Elektromobilitätsprobleme
Peter, M.; Singer, R.; Fleischer, J.
2016. Maschinenmarkt, 20, 39–40
Development of Intelligent Robot Grasping System Based on Machine Vision
Ye, H.; Zhang, W.; Zhang, H.; Fleischer, J.
2016. Modular Machine Tool & Automatic Manufacturing Technique, (12), 1–5
Development of ball screw analysis software using MATLAB Simulink
Leitold, L.; Spohrer, A.; Weinmann, H. W.; Fleischer, J.
2016. GAMAX Proceedings, 1
Fiber-Injection-Moulding : Herausforderungen und Chancen
Fleischer, J.; Dackweiler, M.; Ballier, F.
2016. VDI-Z, 16 (10), 64–66
Spanende Bearbeitung von Kunststoffen mit kombinierter Lang- und Endlosfaserverstärkung
Helfrich, A.; Klotz, S.; Schulze, V.
2016. Maschinen, Anlagen, Verfahren, 16, 86–88
Influence of a high speed broaching and case-hardening process on the resulting component geometry
Bejnoud, F.; Zanger, F.; Schulze, V.
2016. 13th International Conference on High Speed Machining : Progress in High Speed Machining Technology, October 4-5, 2016, Metz, France., 6
Intrinsic Hybrid Composites for Lightweight Structures: New Process Chain Approaches
Koch, S.-F.; Barfuss, D.; Bobbert, M.; Groß, L.; Grützner, R.; Riemer, M.; Stefaniak, D.; Wang, Z.
2016. (J. P. Wulfsberg, M. Fette, T. Montag & T. T. Publications, Eds.) Advanced materials research, 1140, 239–246. doi:10.4028/www.scientific.net/AMR.1140.239
Surface Engineering :Optimierte Oberflächen durch Zerspanungsprozesse
Schulze, V.; Bollig, P.; Gerstenmeyer, M.; Segebade, E.; Zanger, F.
2016. mav Innovationsforum 2016, 1, 6
Efficient implementation of I4.0 with the VDMA toolbox based on use cases
Fleischer, J.; Bauer, J.; Klee, B.; Spohrer, A.
2016. Adaptive and smart manufacturing : Wiener Produktionstechnik Kongress 2016 : WPK 2016, 28.-29.9.2016. Ed.: F. Bleicher, 59–64, New Academic Press
Simulation based reduction of the impact load occurring in the moment of cutting edge entrance in order to prolong tool-life
Matuschka, B.; Boev, N.; Zanger, F.; Schulze, V.
2016. WGP Congress 2016 : Selected, peer reviewed papers from the 2016 WGP Congress, September 5-6, 2016, Hamburg, Germany. Ed.: J. P. Wulfsberg, 173–180, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.1140.173
26th CIRP Design Conference 2016
Wang, L.; Kjellberg, T. (Eds.)
2016. Curran
8th International Conference on Enterprise Interoperability 2016
Zelm, M.; Doumeingts, G.; Mendonça, J. P. (Eds.)
2016. ISTE
Framework of Robustness: The Concept of Robustness in Production Systems
Stricker, N.; Moser, E.; Lanza, G.
2016. Enterprise Interoperability in the Digitized and Networked Factory of the Future. Hrsg.: M. Zelm, 395–401, International Society for Technology in Education
Simulation-Based Evaluation of Quality Control Strategies in Global Manufacturing Networks
Arndt, T.; Buderer, C.; Hofmann, M.; Lanza, G.
2016. Advanced Materials Research, 1140, 473–480. doi:10.4028/www.scientific.net/AMR.1140.473
Intrinsic Hybrid Composites for Lightweight Structures: Tooling Technologies
Wang, Z.; Riemer, M.; Koch, S.-F.; Barfuss, D.; Grützner, R.; Augenthaler, F.; Schwennen, J.
2016. Advanced materials research, 1140, 247–254. doi:10.4028/www.scientific.net/AMR.1140.247
Optimization of Prozess Chain for Continuous-Discontinuous Long Fiber Reinforced Polymer Structures
Pangboonyanon, W.; Zaiß, M.; Fleischer, J.; Lanza, G.
2016. Proceedings of the 17th European Conference on Composite Materials : ECCM17 - 17th European Conference on Composite Materials, 26-30th June 2016, Munich, Germany, MAI Carbon Cluster Management
Analyse der MMS-Zerspanung zur Aerosolbeurteilung
Bollig, P.; Wengle, D.; Schulze, V.; Zanger, F.
2016. Maschinenmarkt, 122, 32–35
Separation strategies for a feeding system with modular coupled piezoelectric vibration conveyers
Fleischer, J.; Krause, M.
2016. Proceedings of the 16th International Conference of the European Society for Precision Engineering and Nanotechnology : May 30th-3rd June 2016, Nottingham, UK. Ed.: P. Bointon, 151–153, European Society for Precision Engineering and Nanotechnology (euspen)
Servopneumatic Clamping System for the Assembly of Battery Cells in the Area of Electromobility
Gauchel, W.; Haag, S.
2016. 10th International Fluid Power Conference (10. IFK) : March 8-10, 2016 in Dresden. Bd.: 3, 137–148, Technische Universität Dresden (TU Dresden)
Toolbox Industrie 4.0 für kleine und mittelständische Unternehmen
Bauer, J.; Klee, B.; Fleischer, J.
2016. "KMU 4.0" - intelligente Fertigungstechnologie für kleine und mittelständische Unternehmen : Fertigungstechnisches Kolloquium Magdeburg. Hrsg.: H.-Ch. Möhring, 3, Otto-von-Guericke-Universität Magdeburg
Lebensdauererhöhung von Kugelgewindetrieben durch Adaptive Schmierung
Spohrer, A.; Fleischer, J.
2016. GETLUB : Tribologie- und Schmierstoffkongress : 9. und 10. März 2016 in Würzburg / FVA, 406–415, Forschungsvereinigung Antriebstechnik (FVA)
Befähigungs- und Einführungsstrategien für Industrie 4.0 – Vorstellung eines reifegradbasierten Ansatzes zur Implementierung von Industrie 4.0
Lanza, G.; Nyhuis, P.; Ansari, S. M.; Kuprat, T.; Liebrecht, C.
2016. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 76–79. doi:10.3139/104.111462
Joining Parameters and Handling System for Automated Subpreform Assembly
Fleischer, J.; Ballier, F.; Dietrich, M.
2016. Robotics and Automated Production Lines : Selected, peer reviewed papers from the 1st MHI Colloquium, February 24-25, 2016, Hamburg, Germany. Ed.: T. Schüppstuhl, 66–73, Trans Tech Publications. doi:10.4028/www.scientific.net/AMM.840.66
Rotational Molding of Fiber Reinforced Plastics with Elastic Composite Core
Fleischer, J.; Koch, S.-F.; Ruhland, P.
2016. D. Dimitrov & T. Oosthuizen (Eds.), International Conference on Competitive Manufacturing : COMA ’16 : 27 January-29 January 2016, Stellenbosch, South Africa : proceedings [Resource Efficiency for Global Competitiveness]. Ed.: D. Dimitrov, 181–186, Stellenbosch University
Effects of Different Levels of Abstraction Simulating Heat Sources in FEM Considering Drilling
Bollig, P.; Köhler, D.; Zanger, F.; Schulze, V.
2016. Procedia CIRP, 46, 115–118. doi:10.1016/j.procir.2016.03.186
Developing the process chain of selective laser melting towards a cost efficient series production
Kopf, R.; Lingen, A.; Lanza, G.
2016. 6th International Conference on Additive Technologies - iCAT 2016 : proceedings : Nürnberg, Germany, 29.-30. November 2016 : DAAAM Specialized Conference. Ed.: I. Drstvenšek, 368–376, Interesansa
Development of test bodies for deployment in Industrial Computed Tomography
Kraemer, A.; Batra, A.; Lanza, G.
2016. 6th Conference on Industrial Computed Tomography (iCT) 2016 : 9-12 February 2016, Wels, 1–8, FH Oberösterreich
Optimierung von Aufnahmeparametern mittels projektionsbasierter Qualitätskenngrößen in der industriellen Computertomographie
Kraemer, A.; Boehmler, P.; Lanza, G.
2016. Sensoren und Messsysteme 2016 : 18. GMA/ITG-Fachtagung, Nürnberg Convention Center, 10. und 11. Mai 2016 : Tagungsband, 383–390, AMA Service
Methodology for the evaluation of CT image quality in dimensional metrology
Kraemer, A.; Lanza, G.
2016. 19th WCNDT 2016 : World Conference on Non-Destructive Testing ; 13 - 17 June, Germany . Ed.: M. Purschke, 1–7, Deutsche Gesellschaft für Zerstörungsfreie Prüfung (DGZFP)
Tagungsband 18. GMA/ITG-Fachtagung Sensoren und Messsysteme 2016
VDI-/VDE-Gesellschaft (Ed.)
2016. AMA Service
Resource-Based Reconfiguration of Manufacturing Networks Using a Product-to-Plant Allocation Methodology
Hochdoerffer, J.; Berndt, C. V.; Lanza, G.
2016. CIRP International Conference on Competitive Manufacturing (COMA) 2016, 27th - 29th January 2016, Stellenbosch, South Africa, 511–516
2016 6th International Electric Drives Production Conference (E|DPC): November 30th-December 1st, 2016, Nuremberg, Germany : proceedings
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2016. Institute of Electrical and Electronics Engineers (IEEE)
IEEM 2016: International Conference on Industrial Engineering and Engineering Management : 4-7 December 2016, Bali, Indonesia
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2016. Institute of Electrical and Electronics Engineers (IEEE)
Skalierbare Automatisierung und Industrie 4.0
Greinacher, S.; Echsler Minguillon, F.; Haefner, B.; Stricker, N.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (9), 659–665
Verbesserungsstrategien in Produktionssystemen: Simulationsbasierte Bewertung des Lean- und Green-Methodeneinsatzes
Greinacher, S.; Moser, E.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (4), 260–265
Shopfloor-getriebene Einführung von Industrie 4.0: Ein Bottom-up-Ansatz zur Reifegradbewertung für Industrie 4.0-Anwendungen
Liebrecht, C.; Buergin, J.; Benterbusch, J.; Kiefer, C.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (7-8), 539–543
Amplification of Supply Chain Performance Measurement Systems by Sustainability Key Performance Indicators
Lemmerer, C.; Schieder, P.; Biegler, C.; Arndt, T.; Lanza, G.; Sihn, W.
2016. Management of Technology - Step to Sustainable Production (MOTSP) 2016. International Conference Management of Technology – Step to Sustainable Production: MOTSP 2016, 1 Jun 2016 - 3 Jun 2016, Porec, Kroatien, 182–189, Elsevier
6th CIRP Conference on Learning Factories (CLF) 2016
Martinsen, K. (Ed.)
2016. Elsevier
Workforce Flexibility in Production Networks: Mid-Term Capacity Planning Illustrated by an Example of the Automotive Industry
Treber, S.; Moser, E.; Lanza, G.
2016. 6. WGP Congress 2016 Hrsg.: Wulfsberg, Jens P.; Fette, Marc; Montag, Tobias, 1140, 427–434. doi:10.4028/www.scientific.net/AMR.1140.427
Technology-based Product-services for Supporting Frugal Innovation
Colledani, M.; Silipo, L.; Yemane, A.; Lanza, G.; Buergin, J.; Hochdoerffer, J.; Georgoulias, K.; Mourtzis, D.; Bitte, F.; Bernard, A.; Belkadi, F.
2016. Procedia CIRP, 47, 126–131. doi:10.1016/j.procir.2016.03.093
8th IPSS Conference on Product-Service Systems Across Life Cycle 2016
Cavalieri, S.; Ceretti, E.; Tolio, T.; Pezzotta, G. (Eds.)
2016. Curran
Technology based industrial product-services supporting robustness in manufacturing systems
Colledani, M.; Silipo, L.; Yemane, A.; Lanza, G.; Stricker, N.; Ziprani, F.; Fogliazza, G.
2016. IFAC-PapersOnLine, 49 (12), 53–58. doi:10.1016/j.ifacol.2016.07.549
The 23rd CIRP Conference on Life Cycle Engineering
Seliger, G.; Krüger, J. (Eds.)
2016. Elsevier
Digitalization of automotive industry - Scenarios for future manufacturing
Peters, S.; Chun, J.-H.; Lanza, G.
2016. Manufacturing review, 3 (1), Art.Nr.: 2015030. doi:10.1051/mfreview/2015030
Skalierbare Automatisierung und Industrie 4.0 = Scalable automation enabled by Industrie 4.0
Greinacher, S.; Echsler Minguillon, F.; Häfner, B.; Stricker, N.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (9), 659–665
Shopfloor-getriebene Einführung von Industrie 4.0 : Ein Bottom-up-Ansatz zur Reifegradbewertung für Industrie 4.0-Anwendungen = Shopfloor-driven implementation of Industrie 4.0
Liebrecht, C.; Bürgin, J.; Benterbusch, J.; Kiefer, C.; Lanza, G.
2016. wt Werkstattstechnik online, 106 (7-8), 539–543
Leistungssteigerung durch Kombination von Produktionstechnik und Qualitätssicherung
Schulze, V.
2016. wt Werkstattstechnik online, 106 (11-12), 781
Sensorik zur Detektion einer Beschichtungskante in der Lithium-Ionen-Zellfertigung
Baumeister, M.; Fleischer, J.; Grether, G.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 32–35. doi:10.3139/104.111455
Planung einer Montagelinie mit skalierbarem Automatisierungsgrad
Lanza, G.; Stähr, T.; Sapin, S.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (10), 614–617. doi:10.3139/104.111610
Total Cost of Ownership-Betrachtungen von Werkzeugmaschinen : Chancen und Herausforderungen = Chances and Challenges for Total Cost of Ownership Calculations of Machine Tools
Lanza, G.; Schulze, V.; Bejnoud, F.; Stähr, T.; Wruck, A.; Ren, L.-H.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (12), 798–801. doi:10.3139/104.111649
Optimization of process chain for continuous-discontinuous long fiber reinforced polymer structures
Pangboonyanon, W.; Zaiß, M.; Fleischer, J.; Lanza, G.
2016. ECCM 2016 - Proceeding of the 17th European Conference on Composite Materials; Munich; Germany; 26 June 2016 through 30 June 2016, 1–8, European Society for Composite Materials (ESCM)
Simulation of the assembly process of the insert technique for distributed windings
Hofmann, J.; Blanc, F. S.-L.; Krause, M.; Wirth, F.; Fleischer, J.
2016. 6th International Electric Drives Production Conference (E/DPC), Nürnberg, November 30 - December 1, 2016. Proceedings, 144–148, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851326
Planning approach for a changeable multi model assembly system
Fisel, J.; Lanza, G.
2016. 6th International Electric Drives Production Conference (E/DPC), Nürnberg, November 30 - December 1, 2016. Proceedings, 212–216, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2016.7851336
The Influence of Tool Holder Technologies on Milling Performance
Fleischer, J.; Schulze, V.; Klaiber, M.; Bauer, J.; Zanger, F.; Boev, N.; Leberle, U.; Spohrer, A.; Rothaupt, B.
2016. Procedia CIRP, 46, 226–229. doi:10.1016/j.procir.2016.03.183
Experimental Study on Comparing Intensities of Burnishing and Machine Hammer Peening Processes
Lienert, F.; Gerstenmeyer, M.; Krall, S.; Lechner, C.; Trauth, D.; Bleicher, F.; Schulze, V.
2016. Procedia CIRP, 45, 371–374. doi:10.1016/j.procir.2016.02.143
Materialeffizienz im Resin-Transfer-Moulding-Prozess - Ganzheitliche Subpreforming-Strategie erlaubt Reduktion des Faserverschnitts
Fleischer, J.; Albers, A.; Coutandin, S.; Spadinger, M.
2016. VDI-Z integrierte Produktion, 16 (1), 82–84
Complementary Machining – Machining Strategy for Surface Modification
Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2016. Procedia CIRP, 45, 247–250. doi:10.1016/j.procir.2016.02.048
Adjusting the Factory Planning Process when Using Immature Technologies
Kopf, R.; Schlesinger, L.; Peters, S.; Lanza, G.
2016. Procedia CIRP, 41, 1011–1016. doi:10.1016/j.procir.2015.12.064
Influence of the shielding gas flow on the removal of process by-products in the selective laser melting process
Ladewig, A.; Schlick, G.; Fisser, M.; Schulze, V.; Glatzel, U.
2016. Additive manufacturing, 10, 1–9. doi:10.1016/j.addma.2016.01.004
Increased Surface Integrity in Porous Tungsten from Cryogenic Machining with Cermet Cutting Tool
Schoop, J.; Ambrosy, F.; Zanger, F.; Schulze, V.; Jawahir, I. S.; Balk, T. J.
2016. Materials and manufacturing processes, 31 (7), 823–831. doi:10.1080/10426914.2015.1048467
Strategic planning of immature Technologies for serial application using the example of selective laser melting
Kopf, R.; Lanza, G.
2016. IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), Bali, Indonesia, 4–7 December 2016, 621–625, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/IEEM.2016.7797950
Risk Efficient Migration Strategies for Global Production Networks
Moser, E.; Stricker, N.; Lanza, G.
2016. Procedia CIRP, 57, 104–109. doi:10.1016/j.procir.2016.11.019
Residual Stress States After Piezo Peening Treatment at Cryogenic and Elevated Temperatures Predicted by FEM Using Suitable Material Models
Klumpp, A.; Tamam, M.; Lienert, F.; Dietrich, S.; Gibmeier, J.; Schulze, V.
2016. Materials research proceedings, 175–180. doi:10.21741/9781945291173-30
Funktionsintegriertes Maschinenkonzept für die Einzelblatt-Stapelbildung von Lithium-Ionen-Zellen
Baumeister, M.; Fleischer, J.
2016. Batterieforum Deutschland, Berlin, 6.-8.April 2016
Sensorik zur Detektion einer Beschichtungskante in der Lithium-Ionen-Zellfertigung
Baumeister, M.; Fleischer, J.; Grether, G.
2016. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 111 (1-2), 32–35
Cryogenic machining of porous tungsten for enhanced surface integrity
Schoop, J.; Ambrosy, F.; Zanger, F.; Schulze, V.; Balk, T. J.; Jawahir, I. S.
2016. Journal of materials processing technology, 229, 614–621. doi:10.1016/j.jmatprotec.2015.10.002
Eignung des Kunststoff-Freiformens für metallische Bauteile
Spiller, Q.; Müller, T.; Plewa, K.; Hanemann, T.; Fleischer, J.
2016. VDI-Z integrierte Produktion, (11), 1–2
Integrated and Modular Didactic and Methodological Concept for a Learning Factory
Lanza, G.; Minges, S.; Stoll, J.; Moser, E.; Haefner, B.
2016. Procedia CIRP, 54, 136–140. doi:10.1016/j.procir.2016.06.107
Analysis of the effective thermoelastic properties and stress fields in silicon nitride based on EBSD data
Othmani, Y.; Böhlke, T.; Lube, T.; Fellmeth, A.; Chlup, Z.; Colonna, F.; Hashibon, A.
2016. Journal of the European Ceramic Society, 36 (5), 1109–1125. doi:10.1016/j.jeurceramsoc.2015.10.046
The RobustPlaNet Project: Towards Shock-Robust Design Of Plants And Their Supply Chain Networks
Jauregui Becker, J. M.; Kádár, B.; Colledani, M.; Stricker, N.; Urgo, M.; Unglert, J.; Gyulai, D.; Moser, E.
2016. IFAC-PapersOnLine, 49 (12), 29–34. doi:10.1016/j.ifacol.2016.07.545
Preparation of Papers for IFAC Conferences & Symposia: Migration Planning for Global Production Networks using Markovian Decision Processes
Moser, E.; Stricker, N.; Liebrecht, C.; Hiller, A.; Ziegler, M.; Lanza, G.
2016. IFAC-PapersOnLine, 49 (12), 35–40. doi:10.1016/j.ifacol.2016.07.546
Learning to Enumerate
Jörger, P.; Baba, Y.; Kashima, H.
2016. Artificial Neural Networks and Machine Learning (ICANN) - 25th International Conference on Artificial Neural Networks, Barcelona, Spain, September 6-9, 2016, Part I, 453–460, Springer Verlag. doi:10.1007/978-3-319-44778-0_53
Surface modification by machine hammer peening and burnishing
Schulze, V.; Bleicher, F.; Groche, P.; Guo, Y. B.; Pyun, Y. S.
2016. CIRP annals, manufacturing technology, 65 (2), 809–832. doi:10.1016/j.cirp.2016.05.005
Cryogenic manufacturing processes
Jawahir, I. S.; Attia, H.; Biermann, D.; Duflou, J.; Klocke, F.; Meyer, D.; Newman, S. T.; Pusavec, F.; Putz, M.; Rech, J.; Schulze, V.; Umbrello, D.
2016. CIRP annals, manufacturing technology, 65 (2), 713–736. doi:10.1016/j.cirp.2016.06.007
Co-Definition of Product Structure and Production Network for Frugal Innovation Perspectives: Towards a Modular-based Approach
Belkadi, F.; Buergin, J.; Gupta, R. K.; Zhang, Y.; Bernard, A.; Lanza, G.; Colledani, M.; Urgo, M.
2016. Procedia CIRP, 50, 589–594. doi:10.1016/j.procir.2016.04.160
Target System Based Design of Quality Control Strategies in Global Production Networks
Arndt, T.; Lemmerer, C.; Sihn, W.; Lanza, G.
2016. Procedia CIRP, 50, 336–341. doi:10.1016/j.procir.2016.04.167
Coil winding process modelling with deformation based wire tension analysis
Blanc, F. S.-L.; Hofmann, J.; Simmler, R.; Fleischer, J.
2016. CIRP annals, manufacturing technology, 65 (1), 65–68. doi:10.1016/j.cirp.2016.04.037
Performance measurement in flow lines - Key to performance improvement
Stricker, N.; Pfeiffer, A.; Moser, E.; Kádár, B.; Lanza, G.
2016. CIRP annals, manufacturing technology, 65 (1), 463–466. doi:10.1016/j.cirp.2016.04.031
Featurebasierte Technologieplanung zum Preforming von textilen Halbzeugen. PhD dissertation
Wagner, H.
2016. Shaker Verlag
Sustainable Manufacturing Through Energy Efficient Handling Processes
Fleischer, J.; Förster, F.; Gebhardt, J.
2016. 13th Global Conference on Sustainable Manufacturing, GCSM 2015; Binh Du’o’ng New City; Viet Nam; 16 September 2015 through 18 September 2015. Ed.: G. Seliger, 574–579, Elsevier. doi:10.1016/j.procir.2016.01.136
Condition Monitoring of Rack and Pinion Drive Systems: Necessity and Challenges in Production Environments
Ehrmann, C.; Isabey, P.; Fleischer, J.
2016. 13th Global Conference on Sustainable Manufacturing, GCSM 2015; Binh Du’o’ng New City; Viet Nam; 16 September 2015 through 18 September 2015. Ed.: G. Seliger, 197–201, Elsevier. doi:10.1016/j.procir.2016.01.101
Materialeffiziente hybride Preforms aus Lang- und Endlosfasern – Faserblasverfahren
Fleischer, J.; Förster, F.; Dackweiler, M.
2015. Lightweight Design, 15 (6), 14–19. doi:10.1007/s35725-015-0048-7
Dynamic Characteristics Modeling and Simulation of Ball Screw Feed Drive System Based on Lumped Mass Model
Luo, L.; Zhang, W.; Zhou, M.; Fleischer, J.
2015. Transactions of the Chinese Society for Agricultural Machinery, 1, 370–377. doi:10.6041/j.issn.1000-1298.2015.12.050
Messtechnik für die Qualitätssicherung von Carbonfaser-Preforms – Automobilbau
Brabandt, D.; Hettich, S.; Lanza, G.
2015. Lightweight Design, 8 (6), 20–25. doi:10.1007/s35725-015-0049-6
Analysis of wear behavior of stamping tools in the production of electrical steel sheets
Kraemer, A.; Stoll, J.; Blickle, D.; Lanza, G.; Boeker, B.
2015. 2015 5th International Electric Drives Production Conference (EDPC 2015), Nürnberg, Germany, 15 – 16 September 2015, Art. Nr. 7323218, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323218
Untersuchung der Einflussfaktoren auf die Umformbarkeitmetallischer Grünfolien
Spiller, Q.; Baumeister, M.; Fleischer, J.
2015. Institut für Kunststoffverarbeitung (IKV) (Ed.), 7. Kolloquium Mikroproduktion Hrsg.: Institut für Kunststoffverarbeitung (IKV), 222–229
Bearbeitung metallischer Gläser auf Fe- und Zr-Basis mittels Mikrofräsen, Mikrofunkenerosion und Mikrolaserabtragen
Hoppen, P.; Kacaras, A.; Matuschka, B.; Schulze, V.
2015. 7. Kolloquium Mikroproduktion : 16.-17. November 2015, Aachen. Hrsg.: Ch. Hopmann, RWTH Aachen
Alternative Herstellung von elektrischen Leitern in der Mikrotechnik
Matuschka, B.; Granser, T.; Rohde, M.; Schulze, V.; Seifert, H.
2015. wt Werkstattstechnik online, 2015, 800–804. doi:10.37544/1436-4980-2015-11-12-40
Leiterbahnen zur Versorgung von Leistungselektronik auf Spritzgegossenen, keramischen Grundkörpern
Matuschka, B.; Schulze, V.; Rohde, M.; Seifert, H.
2015. GMM - VDE/VDI-Gesellschaft Mikroelektronik (Ed.), MikroSystemTechnik Kongress Hrsg.: GMM - VDE/VDI-Gesellschaft Mikroelektronik. 6. MikroSystemTechnik Kongress "MEMS, Mikroelektronik, Systeme", 26. - 28. Oktober 2015, Karlsruhe, 242–245, VDE Verlag
Comparative testing on milling for hydraulic and heat shrinkage tool-holders
Liu, Z.-H.; Zhang, W.; Xu, J.-Z.; Du, S.-J.; Fleischer, J.
2015. Chinese Journal of Construction Machinery, 1, 457–460
Compensation of geometric errors using a highly integrated hydraulicfeed axis
Klee, B.; Bauer, J.; Graule, D.; Brenner, D.; Fleischer, J.
2015. T. T. Publications (Ed.), WGP Congress 2015 - Progress in Production Engineering Hrsg.: Publications, Trans Tech. WGP Congress 2015 - progress in production engineering ; selected, peer reviewed papers from the 2015 WGP Congress, September 7 - 8, 2015, Hamburg, Germany, 395–402. doi:10.4028/www.scientific.net/AMM.794.395
Intrinsische Hybridisierung im Schleuderverfahren
Koch, S.-F.; Dackweiler, M.; Pottmeyer, F.; Fleischer, J.
2015. Lightweight Design, 15, 12–19. doi:10.1007/s35725-015-0026-0
Industrie 4.0 – ein Beitrag zur Entwicklung von „Smart Networks“
Friedli, T.; Lanza, G.; Schuh, G.; Reuter, C.; Arndt, T.; Fränken, B.; Lützner, R.; Wenking, M.
2015. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (6), 378–382. doi:10.3139/104.111343
Leitfaden Industrie 4.0 - Orientierungshilfe zur Einführung in den Mittelstand
Anderl, R.; Picard, A.; Wang, Y.; Fleischer, J.; Dorsch, S.; Klee, B.; Bauer, J.
2015. VDMA Verlag
Selektive Montage zur Reduktion der Rotorunwucht in PM Motoren
Peter, M.; Fleischer, J.
2015. Wissen, was uns morgen antreibt - Industrie und Forschung im Dialog rund um die elektrische Antriebstechnik : E-MOTIVE : 7. Expertenforum Elektrische Fahrzeugantriebe : 09. und 10. Juni 2015, BMW Driving Academy Maisach bei München, 57, Forschungsvereinigung Antriebstechnik (FVA)
Novel Approach for 3D Simulation of a Cutting Process with Adaptive Remeshing Technique
Zanger, F.; Boev, N.; Schulze, V.
2015. (V. Schulze, Ed.) Procedia CIRP, 31, 88–93. doi:10.1016/j.procir.2015.03.022
High Performance Machining Enabled by Adaptive Machine Components
Burtscher, J.; Koch, S.-F.; Bauer, J.; Wagner, H.; Fleischer, J.
2015. Procedia CIRP, 31, 70–75. doi:10.1016/j.procir.2015.03.039
Influence of Kinematic Hardening during Machining of ARMCO Iron
Zanger, F.; Fellmeth, A.; Gerstenmeyer, M.; Schulze, V.
2015. (V. Schulze, Ed.) 15th CIRP Conference on Modelling of Machining Operations (15th CMMO) Hrsg.: Schulze, Volker, 31, 106–111. doi:10.1016/j.procir.2015.03.102
Evaluation of different approaches for modeling phase transformations in machining simulation
Schulze, V.; Uhlmann, E.; Mahnken, R.; Menzel, A.; Biermann, D.; Zabel, A.
2015. Production engineering, 2015, 437–449. doi:10.1007/s11740-015-0618-7
Manufacturing of polygon fiber reinforced plastic profiles by rotational molding and intrinsic hybridization
Fleischer, J.; Koch, S.-F.; Coutandin, S.
2015. Prod. Eng. Res. Devel., 15 (3), 317–328. doi:10.1007/s11740-015-0620-0
Wertschöpfungspotenziale im Leichtbau und deren Bedeutung für Baden-Württemberg
Fleischer, J.; Lanza, G.; Baumann, F.; Krämer, A.; Kopf, R.; Wagner, H.; Schneider, M.; Birenbaum, C.; Stroka, M.; Keckl, C.; Kuppinger, J.; Henning, F.; Thielmann, A.; Lerch, C.; Jäger, A.; Zanker, C.
2015. Leichtbau BW
Adaptive and Adequate Lubrication for Highest Component-lifetimes in Feed Drive Axes with Ball Screws
Fleischer, J.; Spohrer, A.; Leberle, U.; Dosch, S.
2015. Procedia CIRP 29 Hrsg.: ELSEVIER, 29, 335–340. doi:10.1016/j.procir.2015.01.070
Großserientaugliche Verbindungselemente für den hybriden Leichtbau – Effects of Defects
Brabandt, D.; Baumann, F.; Berger, D.; Lanza, G.; Summa, J.; Schwarz, M.; Hermann, H.; Pohl, M.; Stommel, M.
2015. Lightweight Design, 8 (2), 48–53. doi:10.1007/s35725-015-0021-5
Characterization of metal inserts embedded in carbon fiber reinforced plastics
Gebhardt, J.; Pottmeyer, F.; Fleischer, J.; Weidenmann, K.
2015. Edtmaier (Ed.), Proceedings of 20th Symposium on Composites Hrsg.: Edtmaier, 506–513, Scientific.Net. doi:10.4028/www.scientific.net/MSF.825-826.506
Geschwindigkeitsmessung bei gerundeten Strangpressprofilen
Fleischer, J.; Schulze, V.; Burtscher, J.; Dosch, S.
2015. VDI-Z Integrierte Produktion, 157 (1), 60–62
Component Distortion due to a Broaching Process
Bejnoud, F.; Zanger, F.; Schulze, V.
2015. Progress in Production Engineering. Hrsg.: Jens P. Wulfsberg, Benny Röhlig and Tobias Montag, 239–246. doi:10.4028/www.scientific.net/AMM.794.239
The Hybrid RTM Process Chain: Automated Insertion of Load Introducing Elements during Subpreform Assembling
Ballier, F.; Schwennen, J.; Berkmann, J.; Fleischer, J.
2015. B. R. Jens P. Wulfsberg & T. Montag (Eds.), Progress in Production Engineering. Hrsg.: Jens P. Wulfsberg, Benny Röhlig; Montag, Tobias. 8th WGP-Jahreskongress, Aachen, 19.11.2018-20.11.2018, 312–319. doi:10.4028/www.scientific.net/AMM.794.312
Wie Industrie 4.0 die Steuerung von Produktion und Supply Chain verändern wird
Lanza, G.; Buergin, J.; Berger, D.; Peters, S.
2015. P. Horváth & U. Michel (Eds.), Controlling im digitalen Zeitalter Hrsg.: Horváth, Péter; Michel, Uwe, 87–100, Schäffer-Poeschel Verlag
Prozessfähigkeitsuntersuchung mit Messunsicherheit: Ein Ansatz zur Korrektur des Einflusses der Messunsicherheit
Kippenbrock, K.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (7-8), 555–559
Projection based evaluation of CT image quality in dimensional metrology
Kraemer, A.; Kovacheva, E.; Lanza, G.
2015. International Symposium on Digital Industrial Radiology and Computed Tomography (DIR) 2015, 22.-25. Juni 2015, Gent, Belgien, 1–10, NDT.net
Sustainability Optimization for Global Supply Chain Decision-making
Bhinge, R.; Moser, R.; Moser, E.; Lanza, G.; Dornfeld, D.
2015. (G. Seliger & N. M. Yusof, Eds.) 12th Global Conference on Sustainable Manufacturing - Emerging Potentials Hrsg.: Seliger, Günther; Yusof, Noordin M., 26, 323–328. doi:10.1016/j.procir.2014.07.105
Inline metrology of carbon fiber preforms as an indicator of mechanical properties of consolidated CFRP parts
Brabandt, D.; Lanza, G.
2015. 12th International Conference on the Mechanical Behavior on of Materials: Thermal Stability of Residual Streses in Ti-6Al-4V components (ICM) 2012, 339
Data Processing for an Inline Measurement of Preforms in the CFRP-Production
Brabandt, D.; Lanza, G.
2015. R. Teti (Ed.), 9th CIRP Conference on Intelligent Computation in Manufacturing Engineering - CIRP ICME ’14. Hrsg.: Teti, Roberto, 9th CIRP International Conference on Intelligent Computation in Manufacturing Engineering (CIRP ICME) 2014. 23.07.2014-25.07.2014, Capri, Italien, 269–274, Elsevier. doi:10.1016/j.procir.2015.06.048
Customer-driven Planning and Control of Global Production Networks - Balancing Standardisation and Regionalisation
Arndt, T.; Hochdoerffer, J.; Moser, E.; Peters, S.; Lanza, G.
2015. Cambridge International Manufacturing Symposium 2014 proceedings : proceedings of the 18th Cambridge International Manufacturing Symposium - September 2014 / IfM - Management, Technology, Policy, 60–74, University of Cambridge, Institute for Manufacturing
International Symposium on Digital Industrial Radiology and Computed Tomography (DIR) 2015
Fraunhofer Development Center X-ray Technology EZRT (Ed.)
2015. NDT.net
Controlling im digitalen Zeitalter: Herausforderungen und Best-Practice-Lösungen
Horváth, P.; Michel, U. (Eds.)
2015. Schäffer-Poeschel Verlag
Modelle zur Vorhersage von Produktionskosten - Stochastische Kostenprognose im Rahmen der Elektromobilität
Hochdoerffer, J.; Henkes, P.; Peters, S.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 238–243
Deutsch-chinesische Industriekooperationen - Industrielle Synergien zwischen Baden-Württemberg und dem Suzhou Industrial Park
Hochdoerffer, J.; Buergin, J.; Lanza, G.
2015. Industrie-Management, 57 (5), 57–61
Evaluation of global manufacturing networks - a matter of perspective
Hochdoerffer, J.; Arndt, T.; Buergin, J.; Moser, E.; Scherb, M.; Lanza, G.
2015. International manufacturing - revisited: embracing new technologies, capabilities and markets : 19th Cambridge International Manufacturing Symposium, 24-25 September 2015 : conference proceedings, 327–339, University of Cambridge
International manufacturing - revisited: embracing new technologies, capabilities and markets: 19th Cambridge International Manufacturing Symposium, 24-25 September 2015 : conference proceedings
Cambridge International Manufacturing Symposium (Ed.)
2015. University of Cambridge, Institute for Manufacturing, Department of Engineering
Finite Element Simulation for Quality Dependent Lifetime Analysis of Micro Gears
Haefner, B.; Quiring, M.; Gullasch, J.; Glaser, G.; Dmytruk, T.; Lanza, G.
2015. (V. Schulze, Ed.) 15th CIRP Conference on Modelling of Machining Operations (CMMO) 2015 Hrsg.: Schulze, Volker, 31, 41–46. doi:10.1016/j.procir.2015.03.047
Quality Dependent Lifetime Prognosis of Micro Gears
Haefner, B.; Lanza, G.
2015. V.-G. P.-. und Prozessgestaltung (Ed.), International Conference on Gears 2015, International Conference on High Performance Plastic Gears 2015, International Conference on Gear Production 2015 : Europe invites the world ; time and venue: October 5th to 7th, 2015, 217–226, VDI Verlag
Funktionsorientierte Qualitätssicherung zur Lebensdauerprognose von Mikrozahnrädern
Haefner, B.; Lanza, G.
2015. GETPRO : 5. Kongress zur Getriebeproduktion ; 25./26. März 2015 in Würzburg, 267–278, FVA Forschungsvereinigung Antriebstechnik e.V
Function-Oriented Measurements of Micro Gears for Lifetime Evaluation
Haefner, B.; Lanza, G.
2015. 17th International Conference on Sensors and Measurement Technology (SENSOR 2015) and 14th International Conference on Infrared Sensors & Systems (IRS2 2015), 19th -21st May 2015, Nuremberg, Germany, 441–446, AMA Service
Planung des Einsatzes von Inline-Messtechnik: Betrachtung am Beispiel der Batteriemontage als unreife Produktionstechnologie
Haefner, B.; Koelmel, A.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (11-12), 787–792
Simulation Based Assessment of Lean and Green Strategies in Manufacturing Systems
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. (S. Kara, Ed.) Procedia CIRP, 29, 86–91. doi:10.1016/j.procir.2015.02.053
Schlank und ressourceneffizient produzieren: Planung und Bewertung des Lean- und Green-Methodeneinsatzes
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 231–237
Optimisation of Lean and Green Strategy Deployment in Manufacturing Systems
Greinacher, S.; Lanza, G.
2015. Applied Mechanics and Materials, 794, 478–485. doi:10.4028/www.scientific.net/AMM.794.478
Learning Factory on Global Production
Lanza, G.; Moser, E.; Stoll, J.; Haefner, B.
2015. (D. Kreimeier, Ed.) 5th Conference on Learning Factories (CLF) 2015, 32, 120–125. doi:10.1016/j.procir.2015.02.081
International Conference on Gears 2015
Prozessgestaltung, V.-G. P.-. und (Ed.)
2015. VDI Verlag GmbH
Flexible Handhabung und Montage: Anpassbare Lösungen in der Produktionstechnik
Fleischer, J.; Zäh, M. F.
2015. wt Werkstattstechnik online, 105 (9), 560
Erfolgskontrolle textiler Vereinzelungsprozesse = Success monitoring of fabric separation processes
Fleischer, J.; Förster, F.
2015. wt Werkstattstechnik online, 105 (9), 561–566
Schlank und ressourceneffizient produzieren : Planung und Bewertung des Lean- und Green-Methodeneinsatzes = Lean and Green Manufacturing
Greinacher, S.; Moser, E.; Hermann, H.; Lanza, G.
2015. wt Werkstattstechnik online, 105 (4), 231–237
Herstellkosten im Rahmen der Elektromobilität : Konzeptionierung und Anwendung eines stochastischen Prognosemodells
Hochdörffer, J.; Maul, J.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (3), 122–125. doi:10.3139/104.111288
Wirtschaftlichkeitsbetrachtung von Inline-Messtechnik in Werkzeugmaschinen
Brabandt, D.; Berger, D.; Brenner, D.; Heinzler, A.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (4), 210–213. doi:10.3139/104.111305
Instandhaltungsleistungen im Servicenetzwerk : Entwicklung eines Kennzahlensystems zur Bewertung der Servicefähigkeit
Kopf, R.; Sommer, A.; Lanza, G.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (7-8), 429–433. doi:10.3139/104.111378
Tiefgezogene Verpackungen von Lithium-Ionen-Pouchzellen = Deep drawn packages of Lithium ion pouch cells
Fleischer, J.; Singer, R.; Langknecht, F.
2015. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 110 (11), 730–733. doi:10.3139/104.111432
Optimal investment policies in premature manufacturing technologies
Peters, S.
2015. International journal of production research, 53 (13), 3963–3974. doi:10.1080/00207543.2014.980455
Application of a meta-analysis of aortic geometry to the generation of a compliant phantom for use in particle image velocimetry experimentation
Huetter, L.; Geoghegan, P. H.; Docherty, P. D.; Soltanipour Lazarjan, M.; Clucas, D.; Jermy, M.
2015. IFAC-PapersOnLine, 48 (20), 407–412. doi:10.1016/j.ifacol.2015.10.174
Supporting multi-level and robust production planning and execution
Stricker, N.; Pfeiffer, A.; Moser, E.; Kádár, B.; Lanza, G.; Monostori, L.
2015. CIRP annals, manufacturing technology, 64 (1), 415–418. doi:10.1016/j.cirp.2015.04.115
Optimization of selective assembly and adaptive manufacturing by means of cyber-physical system based matching
Lanza, G.; Haefner, B.; Kraemer, A.
2015. CIRP annals, manufacturing technology, 64 (1), 399–402. doi:10.1016/j.cirp.2015.04.123
Materials in machine tool structures
Moehring, H.-C.; Brecher, C.; Abele, E.; Fleischer, J.; Bleicher, F.
2015. CIRP annals, manufacturing technology, 64 (2), 725–748. doi:10.1016/j.cirp.2015.05.005
Analysis of wire tension control principles for highly dynamic applications in coil winding: Investigation of new tension control devices for noncicurlar orthocyclic coils
Blanc, F. S. L.; Fleischer, J.; Schmitt, M.; Unger, M.; Hagedorn, J.
2015. 5th International Electric Drives Production Conference (EDPC 2015), Nürnerg, Germany, 15 - 16 September 2015, 7323202, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323202
Optimized magnet assembly algorithms for reduced rotor unbalance: New rotor balancing strategy by measuring the weight of each magnet and placing it according to an algorithm
Peter, M.; Fleischer, J.
2015. 5th International Electric Drives Production Conference (EDPC 2015), Nürnberg, Germany, 15 - 16 September 2015, Art. Nr. 7323204, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2015.7323204
Joining zone design for electromagnetically crimped connections
Weddeling, C.; Walter, V.; Haupt, P.; Tekkaya, A. E.; Schulze, V.; Weidenmann, K. A.
2015. Journal of Materials Processing Technology, 225, 240–261. doi:10.1016/j.jmatprotec.2015.06.009
Characterization of debonding strength in steel-wire-reinforced aluminum and its influence on material fracture
Morasch, A.; Reeb, A.; Baier, H.; Weidenmann, K. A.; Schulze, V.
2015. Engineering Fracture Mechanics, 141, 242–259. doi:10.1016/j.engfracmech.2015.05.029
Continuous folding process for the assembly of lithium-ion cells
Haag, S.; Fleischer, J.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
Function integrated machine module for the production of cell stacks
Baumeister, M.; Fleischer, J.
2015. Energy, Science and Technology, Conference and Exhibition (EST 2015), Karlsruhe, Germany, May 20–22, 2015
Fatigue Behavior and Lifetime Prediction of Unidirectionally Wire Reinforced Lightweight Metal Matrix Composites [Preprint]
Merzkirch, M.; Hammers, T.; Reeb, A.; Schwind, T.; Riedl, S.; Thiel, L.; Henschel, A.; Kerscher, E.; Schulze, V.; Weidenmann, K. A.
2015. Advanced engineering materials, 17 (6), 905–911. doi:10.1002/adem.201400354
Study on micro texturing of uncoated cemented carbide cutting tools for wear improvement and built-up edge stabilisation
Kümmel, J.; Braun, D.; Gibmeier, J.; Schneider, J.; Greiner, C.; Schulze, V.; Wanner, A.
2015. Journal of Materials Processing Technology, 215, 62–70. doi:10.1016/j.jmatprotec.2014.07.032
Intelligent gripper technology for the handling of carbon fiber material
Fleischer, J.; Förster, F.; Crispieri, N. V.
2014. Production Engineering, 8 (6), 691–700. doi:10.1007/s11740-014-0549-8
Influence of clamping systems during milling of carbon fiber reinforced composites
Klotz, S.; Zanger, F.; Schulze, V.
2014. New production technologies in aerospace industry : Machining Innovations Conference ; proceedings ; November 19th and 20th, 2014 in Hannover. Hrsg.: B. Denkena, 248–256, TEWISS - Technik und Wissen
Material Behaviour of Armco-Iron and AISI 4140 at High Speed Deformation during Machining
Zanger, F.; Gerstenmeyer, M.
2014. WGP Congress 2014 : progress in production engineering ; selected, peer reviewed papers from the 2014 WGP Congress, September 9 - 10, 2014, Erlangen, Germany. Ed.: M. Merklein, 161–166, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.1018.161
Secure Plug and Work - Intelligente Inbetriebnahme von Maschinen und verketteten Anlagen
Dosch, S.
2014. J. Fleischer (Ed.), Life-Cycle-Performance von Produktionssystemen : Tagungsband zur wbk-Herbsttagung. Hrsg.: J. Jürgen Fleischer, 91–105, Shaker Verlag
Rotor balancing by optimized magnet positioning during algorithm-controlled assembly process: Selection and assembly of rotor components minimizing the unbalance
Peter, M.; Fleischer, J.
2014. IEEE (Ed.), 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, 444–447, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984432
Automatisierung in der Batteriemodulmontage
Haag, M.; Fleischer, J.; Haag, S.
2014. ATZ extra, 19, 80–83. doi:10.1365/s35778-014-1296-3
Fault analysis of linear winding processes for noncircular orthocyclic coils: Investigation of winding scheme dependencies within the winding process development
Sell-Le Blanc, F.; Fleischer, J.; Sautter, S.; Delz, T.; Hagedorn, J.
2014. 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, 1–8, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984402
An Approach towards Improving the Robustness of Production Systems
Stricker, N.; Lanza, G.
2014. Advanced Materials Research, 1018, 461–468. doi:10.4028/www.scientific.net/AMR.1018.461
Throughput analysis and simulation-based improvement of baked varnish stacking for automotive electric drives
Stoll, J.; Kemper, B.; Lanza, G.
2014. 4th International Electric Drives Production Conference (EDPC), Nuremberg, Germany, 30 September 2014 - 01 October 2014, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2014.6984407
Spanntechnikvergleich bei der Hochleistungszerspanung
Fleischer, J.; Schulze, V.; Zanger, F.; Leberle, U.; Boev, N.; Spohrer, A.
2014. VDI-Z, 156, 42–44
Solving multi-criteria problems under risk: an approach explained using the example of rescheduling in dynamic environments
Stricker, N.; Kopf, R.; Lanza, G.
2014. Production Engineering - Research and Development, 8 (4), 535–541. doi:10.1007/s11740-014-0556-9
Trennen von faserverstärkten Kunststoffen
Schulze, V.; Klotz, S.
2014. Handbuch Spanen. Hrsg.: U. Heisel, 1241–1251, Carl Hanser Verlag
Hard Broaching of Case Hardened SAE 5120
Meier, H.; Ninomiya, K.; Dornfeld, D.; Schulze, V.
2014. Procedia CIRP, 14, 60–65. doi:10.1016/j.procir.2014.03.074
Characterization of an Eigenfrequency Adaptable Machine Tool Carriage
Koch, S.-F.; Bauer, J.; Wagner, H.; Horsch, J.; Brecht, S.; Fleischer, J.
2014. Procedia CIRP, 14, 412–417. doi:10.1016/j.procir.2014.03.086
Highly Integrated High Precision Fluidic Feed Axis
Bauer, J.; Mack, D.; Fleischer, J.
2014. Procedia CIRP, 14, 339–344. doi:10.1016/j.procir.2014.03.084
Surface Quality after Broaching with Variable Cutting Thickness
Zanger, F.; Boev, N.; Schulze, V.
2014. Procedia CIRP, 13, 114–119. doi:10.1016/j.procir.2014.04.020
Resource-efficient Ball Screw by Adaptive Lubrication
Fleischer, J.; Leberle, U.; Maier, J.; Spohrer, A.
2014. Procedia CIRP, 15, 50–55. doi:10.1016/j.procir.2014.06.049
A methodological approach to evaluate supplier development based on real options
Ruhrmann, S.; Hochdörffer, J.; Lanza, G.
2014. Production Engineering - Research and Development, 8 (3), 373–382. doi:10.1007/s11740-014-0529-z
Feinstanzmodul für die Produktion von Lithium-Ionen-Batteriezellen
Baumeister, M.; Fleischer, J.
2014. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (5), 301–304. doi:10.3139/104.111142
Intelligenter Greifer zur Handhabung textiler Kohlenstofffaserhalbzeuge
Förster, F.
2014. Faszination Leichtbau : Konzepte, Werkstoffe, Technologien ; Beiträge zum gleichnamigen Symposium vom 19. und 20. Mai 2014, MobileLifeCampus, Wolfsburg / [Symposium Faszination Leichtbau: Konzepte, Werkstoffe, Technologien], 57–79, ITS mobility
Neue Materialien und Hybridbauweise - Leichtbauansätze für elektrische Antriebsmotoren
Peter, M.; Fleischer, J.
2014. Chancen und Herausforderungen der Elektromobilität - zu Lande, zu Wasser und in der Luft : E-MOTIVE : 6. Expertenforum Elektrische Fahrzeugantriebe : 15. und 16. Mai 2014 in Wolfsburg, 38–39, Forschungsvereinigung Antriebstechnik (FVA)
Characterization of Process-Machine-Interaction for Coil Winding Processes using Multi Body Dynamics
Sell-Le Blanc, F.; Fleischer, J.; Li, L.; Krause, M.
2014. CIRP Conference on Virtual Machining Process Technology
Aktive Kompensation des Schneidkantenversatzes
Hoppen, P.; Zanger, F.; Schulze, V.
2014. Mikroproduktion, 2014, 58–62
Leichtbau - Trends und Zukunftsmärkte und deren Bedeutung für Baden-Württemberg
Fleischer, J.; Lanza, G.; Baumann, F.; Krämer, A.; Kopf, R.; Wagner, H.; Schneider, M.; Birenbaum, C.; Stroka, M.; Keckl, C.; Kuppinger, J.; Henning, F.; Wich, Y.; Ardilio, A.; Thielmann, A.; Meister, M.; Sauer, A.; Lerch, C.; Jäger, A.; Zanker, C.
2014. Leichtbau BW
Modeling of Face Milling
Schulze, V.
2014. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 888–894, Springer. doi:10.1007/978-3-642-20617-7_16676
Broaching
Schulze, V.
2014. CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 109–118, Springer. doi:10.1007/978-3-642-20617-7_6686
Managing Variety in Manufacturing
ElMaraghy, H.
2014. Procedia CIRP, 17, 1–2. doi:10.1016/S2212-8271(14)00784-7
Influence of Clamping Systems During Drilling Carbon Fiber Reinforced Plastics
Klotz, S.; Gerstenmeyer, M.; Zanger, F.; Schulze, V.
2014. Procedia CIRP, 13, 208–213. doi:10.1016/j.procir.2014.04.036
Technologieplanung zur automatisierten Fertigung von Preforms für CFK-Halbzeuge
Fleischer, J.; Wagner, H.
2014. Leichtbau-Technologien Im Automobilbau : Werkstoffe - Fertigung - Konzepte. Hrsg.: W. Siebenpfeiffer, Springer Fachmedien Wiesbaden. doi:10.1007/978-3-658-04025-3_2
Finite element analysis of micro gears for the prediction of their lifetime
Haefner, B.; Quiring, M.; Hirtler, M.; Lanza, G.
2014. R. Leach (Ed.), Proceedings of the 14th International Conference of the European Society for Precision Engineering and Nanotechnology : June 2nd-6th, 2014, Dubrovnik, Croatia Hrsg.: Leach, R., 277–280, European Society for Precision Engineering and Nanotechnology (euspen)
Quality Value Stream Mapping
Haefner, B.; Kraemer, A.; Stauss, T.; Lanza, G.
2014. (H. A. El Maraghy, Ed.) Variety Management in Manufacturing Hrsg.: El Maraghy, Hoda A., 17, 254–259. doi:10.1016/j.procir.2014.01.093
CIRP Encyclopedia of Production Engineering
The International Academy for Production Engineering
2014. (L. Laperrière & G. Reinhart, Eds.), Springer Verlag. doi:10.1007/978-3-642-20617-7
Assessment of Dynamics and Risks in Supplier Selection Processes
Ruhrmann, S.; Hochdoerffer, J.; Lanza, G.
2014. Procedia CIRP, 25, 2–9. doi:10.1016/j.procir.2014.10.003
International Conference on Manufacturing of Lightweight Components - ManuLight 2014 : Dortmund, Germany, 3 - 4 April 2014
Tekkaya, A. E.; Baier, H.; Biermann, D.; Fleischer, J.; Lanza, G.; Schulze, V.; Zäh, M. F.; Selvaggio, A. (Eds.)
2014. Curran
Die Produktion im Jahr 2025 - ein Zukunftsbild
Lanza, G.; Peters, S.; Arndt, T.; Haefner, B.; Stricker, N.
2014. Industrie 4.0 Management, 6, 64–66
Fixtureless Alignment of Joining Partners within the Assembly of Aluminum Space Frame Structures
Fleischer, J.; Lanza, G.; Dosch, S.; Elser, J.; Pangboonyanon, W.
2014. Procedia CIRP, 18, 221–225. doi:10.1016/j.procir.2014.06.135
Small Batch Assembly of Space-Frame-Structures with Production Related Deviations of Individual Components
Fleischer, J.; Lanza, G.; Otter, M.; Pangboonyanon, W.
2014. Procedia CIRP, 18, 226–231. doi:10.1016/j.procir.2014.06.136
Efficient ablation strategies and quality assurance for structuring big surfaces by an ultra-short-pulse laser
Chlipala, M.; Stockey, S.; Hirtler, M.; Schulze, V.; Lanza, G.
2014. Proceedings of the 14th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - 6th, 2014, Dubrovnik, Croatia. Ed.: R. Leach, 170–173, European Society for Precision Engineering and Nanotechnology (euspen)
Design and management of manufacturing systems for production quality
Colledani, M.; Tolio, T.; Fischer, A.; Iung, B.; Lanza, G.; Schmitt, R.; Váncza, J.
2014. CIRP Annals-Manufacturing Technology, 63 (2), 773–796. doi:10.1016/j.cirp.2014.05.002
Systematische Untersuchung alternativer Technologien zur Blechpaketherstellung
Stoll, J.; Bauer, S.; Lanza, G.
2014. Chancen und Herausforderungen der Elektromobilität - zu Lande, zu Wasser und in der Luft : E-MOTIVE : 6. Expertenforum Elektrische Fahrzeugantriebe : 15. und 16. Mai 2014 in Wolfsburg, 1, FVA Forschungsvereinigung Antriebstechnik e.V
Optimization in Manufacturing
Stecca, G.; Lanza, G.; Peters, S.
2014. L. Laperrière & G. Reinhart (Eds.), CIRP Encyclopedia of Production Engineering. Ed.: L. Laperrière, 929–932, Springer. doi:10.1007/978-3-642-20617-76565
Automotive manufacturing technologies – an international viewpoint
Peters, S.; Lanza, G.; Ni, J.; Xiaoning, J.; Pei-Yun, Y.; Colledani, M.
2014. Manufacturing Review, 1 (10), 1–12. doi:10.1051/mfreview/2014010
Quality Control in the Production Process of SMC Lightweight Material
Kraemer, A.; Lin, S.; Brabandt, D.; Böhlke, T.; Lanza, G.
2014. Procedia CIRP, 17, 772–777. doi:10.1016/j.procir.2014.01.138
Gestaltung des Servicegeschäfts von Maschinen- und Anlagenbauern : Entwicklung einer Entscheidungsmatrix
Kopf, R.; Appel, D.; Lehmann, S.; Lanza, G.
2014. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 109 (12), 927–930. doi:10.3139/104.111256
A Comparison of FSW, BHLW and TIG Joints for AL-Si-Mg alloy (EN AW-6082 T6)
Walter, V.; Weidenmann, K. A.; Schulze, V.
2014. 1st International Conference on Manufacture of Lightweight Components, ManuLight2014; Dortmund; Germany; 3 April 2014 through 4 April 2014, 120–125, Elsevier. doi:10.1016/j.procir.2014.06.118
An Experimental Study of Cryogenic Machining on Nanocrystalline Surface Layer Generation
Ambrosy, F.; Zanger, F.; Schulze, V.; Jawahir, I.-S.
2014. Procedia CIRP, 13, 169–174. doi:10.1016/j.procir.2014.04.029
Experimentally validated residual stresses and distortion prediction for dual frequency induction hardening
Schwenk, M.; Hoffmeister, J.; Schulze, V.
2014. International Journal of Applied Electromagnetics and Mechanics, 44 (2), 127–135. doi:10.3233/JAE-141752
Automatisiertes Fügen von Tragprofilen mittels Faserwickeln. PhD dissertation
Schädel, J.
2014. Shaker Verlag
Montage von Werkzeugmaschinen
Fleischer, J.; Schöning, S.; Gebhardt, J.; Hennrich, H.
2014. Handbuch Fügen, Handhaben, Montieren. Hrsg.: K. Feldmann, 734–750, Carl Hanser Verlag
FE-simulation of machining induced phase transformations considering friction as a function of temperature and sliding speed and detailed modeling of the heat transport
Schulze, V.; Zanger, F.; Boev, N.; Michna, J.; Maas, U.; Faltin, C.; Schneider, J.; Bollig, P.
2014. Advanced Engineering Materials, 16 (2), 137–141. doi:10.1002/adem.201300103
Alternative Regelstrategien für Vorschubachsen
Fleischer, J.; Sell-Le Blanc, F.; Baumeister, M.; Spohrer, A.; Lütticken, F.; Hennrich, H.
2014. VDI-Z integrierte Produktion, 156 (1/2), 43–45
Automated Modular and Part-Flexible Feeding System for Micro Parts
Leberle, U.; Fleischer, J.
2014. International journal of automation technology, 8 (2), 282–290
Simulation of the manufacturing process of case-hardened powder metallurgical components: carburizing simulation
Nusskern, P.; Hoffmeister, J.; Schulze, V.
2014. Advanced Engineering Materials, 16 (2), 147–150. doi:10.1002/adem.201300101
Hybrider Leichtbau: Herausforderung für die Produktionstechnik
Koch, S.-F.
2013. IHK-Technologie-Akademie Mittelstand, 20.11.2013, Pfinztal, Deutschland, 1–26
Intrinsische Hybridverbunde für Leichtbautragstrukturen
Fleischer, J.; Koch, S.; Gebhardt, J.; Schwennen, J.; Wagner, H.
2013. Fachtagung "Thermoplastische Faserverbundkunststoffe" : 15. - 16. Mai 2013, Fürth / [FAU, Friedrich-Alexander Universität Erlangen-Nürnberg, LKT, Lehrstuhl für Kunststofftechnik.] Hrsg.: D. Drummer, 199–207, Carl Hanser Verlag
Qualitätssicherung in der Mikrofunkenerosion
Matuschka, B.; Ruhs, C.; Schulze, V.
2013. 6. Kolloquium Mikroproduktion : Braunschweig 8. Oktober 2013. Hrsg.: Rainer Tutsch (Hrsg.), A 14, Shaker
Compensating the cutting edge displacement during micro milling - a mechatronic approach
Schulze, V.; Zanger, F.; Deuchert, M.; Hoppen, P.
2013. S. Azcárate & S. Dimov (Eds.), International Conference on Multi-Material Micro Manufacture Hrsg.: Azcárate, Sabino; Dimov, Stefan, 225–228. doi:10.3850/978-981-07-7247-5-418
New conceptual lightweight design approaches for integrated manufacturing processes - Influence of alternative materials on the process chain of electric motor manufacturing
Peter, M.; Fleischer, J.; Sell-Le Blanc, F.; Jastrzembski, J.-P.
2013. IEEE (Ed.), Electric Drives Production Conference (EDPC), 2013 3rd International Hrsg.: IEEE, 206–211, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689735
Prozesskette zur flexiblen Herstellung leichter Aluminium-Tragwerksstrukturen
Otter, M.
2013. Hybrider Leichtbau - Metall trifft Faserverbund, Shaker Verlag
Spatial alignment of joining partners without fixtures, based on component-inherent markings
Fleischer, J.; Lanza, G.; Otter, M.; Elser, J.
2013. Journal of Manufacturing Systems, 32 (3), 489–497. doi:10.1016/j.jmsy.2013.04.004
Produktionstechnische Herausforderungen und Entwicklungen entlang der Prozesskette des Resin Transfer Moulding (RTM)
Thoma, B.; Wagner, H.; Ochs, A.
2013. KITe hyLITE (Ed.), KITe hyLITE Jubiläums - Workshop 5 Jahre innovationscluster Hrsg.: KITe hyLITE, 10–25
Mobile Arbeitsmaschinen simultan orten und ansteuern
Zwirello, L.; Dosch, S.; Fleischer, J.; Zwick, T.
2013. E&E Kompendium
Influence of cutting parameters, tool coatings and friction on the process heat in cutting processes and phase transformations in workpiece surface layers∗
Schulze, V.; Michna, J.; Zanger, F.; Faltin, C.; Maas, U.; Schneider, J.
2013. HTM - journal of heat treatment and materials, 68 (1), 22–31. doi:10.3139/105.110177
Kontinuierliche Fasern zur lokalen Verstärkung und zum automatisierten Fügen
Gebhardt, J.; Schädel, J.
2013. KITe hyLITE Jubiläums - Workshop 5 Jahre innovationscluster, 145–167, Karlsruher Institut für Technologie (KIT)
Mikrosystemtechnik - Wann kommt der Marktdurchbruch?
Bierhals, R.; Weule, H.; Hüntrup, V.; Schünemann, M.; Thies, U.; Cuhls, K.
2013. Springer Verlag
How to teach design for manufacturability at micro scale tasks
Schulze, V.; Zanger, F.; Hoppen, P.
2013. Design education - growing our future : proceedings of the 15th International Conference on Engineering and Product Design Education, Dublin, Dublin Institute of Technology, Bolton Street, Dublin, Ireland, 5th-6th September 2013. Ed.: E. Bohemia, 58–63, The Design Society
TCO 2.0-Ein Weg zu mehr Transparenz und Kommunikation
Lanza, G.; Appel, D.; Stricker, N.
2013. wt Werkstattstechnik online, 103 (7-8), 605–609
Timesaving quality assurance for the automated preforming process in the automobile serial production of carbon composites
Lanza, G.; Brabandt, D.; Bingemann, P.
2013. S. van Hoa (Ed.), 19th International Conference on Composite Materials (ICCM) 2013 Hrsg.: Hoa, Suong van, 8309–8317, Curran
6th IFAC Conference on Management and Control of Production and Logistics 2013
Internationale Förderung für Automatische Lenkung (Ed.)
2013. Curran
2013 3rd International Electric Drives Production Conference (E|DPC)
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
Interdisciplinarity as a success factor - service and reliability planning integrated in a production model
Appel, D.; Genssler, K.; Stricker, N.; Lanza, G.
2013. R. D. J. M. Steenbergen, P. van Gelder, S. Miraglia & A. C. W. M. T. Vrouwenvelder (Eds.), Safety, reliability and risk analysis: beyond the horizon Hrsg.: Steenbergen, Raphaël D. J. M.; Gelder, Pieter van; Miraglia, Simona; Vrouwenvelder, A. C. W. M. Ton, 1325–1332, CRC Press-Taylor & Francis Group
11th IMEKO TC-14 International Symposium on Measurement and Quality Control (ISMQC 2013) : Cracow [and Kielce], Poland, 11 - 13 September 2013
International Measurement Confederation. Technical Committee Measurement of Geometrical Quantities (Ed.)
2013. Curran
IEEE International Conference on Automation Science and Engineering (CASE) 2013: 17 - 20 Aug. 2013, Madison, WI, USA
Institute of Electrical and Electronics Engineers IEEE Robotics and Automation Society (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
IEEE International Conference on Industrial Engineering and Engineering Management (IEEM), 2013: 10 - 13 Dec. 2013, Bangkok, Thailand
Institute of Electrical and Electronics Engineers (IEEE) (Ed.)
2013. Institute of Electrical and Electronics Engineers (IEEE)
Optimization model for value-added networks of globally operating companies
Lanza, G.; Ruhrmann, S.; Stricker, N.; Kohl, M.
2013. Challenges for sustainable operations : planning, implementing and managing reverse networks ; 22nd International Conference on Production Research, ICPR 22 ; July 28 - August 1, 2013 in Inguassu Falls, Brazil proceedings, 1–7, International Foundation for Production Research (IFPR)
Planning Approach for Designing and Evaluating Product and Production Adaptions to Local Market Conditions
Lanza, G.; Ruhrmann, S.; Moser, E.
2013. M. F. Zaeh (Ed.), Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th 2013. Ed.: Michael F. Zaeh, 297–302, Springer. doi:10.1007/978-3-319-02054-9_50
Methodological Approach to Evaluate Product Adaptations Based on Real Options
Lanza, G.; Ruhrmann, S.
2013. A. Chakrabarti (Ed.), 22nd CIRP Design Conference 2012: Sustainable Product Development. Ed. by: Amaresh Chakrabarti, 227–237, Springer. doi:10.1007/978-1-4471-4507-322
Lieferantenqualifizierung: Ein Modell zur Entscheidungsunterstützung und -absicherung
Lanza, G.; Ruhrmann, S.
2013. wt Werkstattstechnik online, 103 (11-12), 933–938
Innovative product-services for robust global supply chains - a viewpoint
Lanza, G.; Stricker, N.; Stoll, J.
2013. Disruptive supply network models in future industrial systems : configuring for resilience and sustainability ; 17th Cambridge International Manufacturing Symposium 19 and 20 September, Cambridge ; symposium proceedings, 386–400, University of Cambridge
63rd General Assemly of CIRP 2013: Copenhagen, Denmark - August 18-24, 2013
The International Academy for Production Engineering (Ed.)
2013. Elsevier Science
Safety, reliability and risk analysis: beyond the horizon: Proceedings of the European Safety and Reliability Conference, ESREL 2013, Amsterdam, The Netherlands, 29 September-2 October 2013
Steenbergen, R. D. J. M.; Gelder, P. van; Miraglia, S.; Vrouwenvelder, A. C. W. M. T. (Eds.)
2013. CRC Press-Taylor & Francis Group
Einsatz von Industrierobotern: Verborgene Potentiale und Chancen
Fleischer, J.; Zäh, M. F.
2013. wt Werkstattstechnik online, 103 (9), 643
Im Gespräch: Fünf KIT Maschinenbauprofessorinnnen
Frohnapfel, B.; Deml, B.; Nestler, B.; Lanza, G.; Ovtcharova, J.
2013. LookKIT. Das Magazin für Forschung, Lehre, Innovation. The magazine for research, teaching, innovation, 2013 (3), 10–15
Effektiv auf kleinstem Raum
Ayhan, S.; Bauer, J.; Gerdes, A.; Grimske, S.; Heinze, T.; Kern, D.; Müller, C.; Pollmann, J.
2013. Maschine + Werkzeug, 2, 76–77
Intelligenter Kugelgewindetrieb zur Steigerung der Life Cycle Performance
Hennrich, H.
2013. wbk Herbsttagung 2012, 22.10.2012, Karlsruhe, Deutschland. Life Cycle Performance produktionstechnischer Maschinen und Anlagen [Konferenz], 103–118
Herstellung von hochbelastbaren Bauteilen im Resin-Transfer-Molding Verfahren
Wagner, H.; Brabandt, D.; Förster, F.; Klotz, S.
2013. Hybrider Leichtbau - Metall trifft Faserverbund, 53–68, Shaker Verlag
Optimierung von Tribosystemen durch gezielte Vorwegnahme des Einlaufs in der spanenden Endbearbeitung am Beispiel von Gleitlagerungen
Nguyen, T.; Ambrosy, F.
2013. 10. VDI-Fachtagung Gleit- und Wälzlagerungen, Gestaltung, Berechnung, Einsatz : mit Fachausstellung ; Schweinfurt, 23. und 24. April 2013 / VDI, Produkt- und Prozessgestaltung, 177–188, VDI Verlag
Quantitative microstructural analysis of nanocrystalline surface layer induced by a modified cutting process
Schulze, V.; Zanger, F.; Ambrosy, F.
2013. Progress in Production Engineering, WGP Kongress 2013, July 23-24, Erlangen, 109–115, Trans Tech Publications. doi:10.4028/www.scientific.net/AMR.769.109
Untersuchungen zum Einspannen von FVK
Gerstenmeyer, M.; Klotz, S.; Zanger, F.; Schulze, V.
2013. Maschinenmarkt, 2013, 14–17
Simulation of Distortion due to Machining of Thin-walled Components
Schulze, V.; Arrazola, P.; Zanger, F.; Osterried, J.
2013. Procedia CIRP, 8, 45–50. doi:10.1016/j.procir.2013.06.063
Verschleißbedingte Parameteranpassung bei der Bohrungsherstellung in faserverstärkten Kunststoffen
Schulze, V.; Zanger, F.; Klotz, S.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03.07.2013 - 05.07.2013, Karlsruhe, Deutschland, 961–970
Design of a measurement machine for quality assurance of preforms in the CFRP process chain
Lanza, G.; Brabandt, D.
2013. ISMTII 2013 - The 11th International Symposium on Measurement Technology and Intelligent Instruments. Ed.: R. Schmitt, 255–256, Apprimus Wissenschaftsverlag
Leitfaden zur Planung und Durchführung von Sourcingprojekten
Lanza, G.; Ruhrmann, S.
2013. Forschungsgemeinschaft Qualität (FQS)
Trends in der Fertigungsmesstechnik - Im Wechselspiel mit den Anforderungen
Lanza, G.; Brabandt, D.; Kölmel, A.; Häfner, B.
2013. Qualität und Zuverlässigkeit, 11, 44–47
Über alle Grenzen hinweg - Qualitätssicherung in globalen Wertschöpfungsnetzwerken
Lanza, G.; Arndt, T.; Häfner, B.
2013. Qualität und Zuverlässigkeit, 12, 26–29
Quality-Oriented Production Planning of Battery Assembly for Automotive Application
Lanza, G.; Sauer, A.
2013. Cirp Production Systems and Organization Scientific Technical Committee, 24.01.2013, Paris, Frankreich
Flexible series production of lamination stacks
Stoll, J.; Lanza, G.; Peters, S.
2013. 13th Stuttgart International Symposium Automotive and Engine Technology Volume 1, 26.02.2013 - 27.02.2013, Stuttgart, Deutschland. Hrsg.: ATZLive, 553–564, ATZlive
Calculation of Maintenance Costs on Poor Data Basis and Implementation in Industrial Practice
Lanza, G.; Stricker, N.; Appel, D.
2013. Product-Service Integration for Sustainable Solutions : Proceedings of the 5th CIRP International Conference on Industrial Product-Service Systems, Bochum, Germany, March 14th - 15th, 2013, 597–608, Springer Verlag. doi:10.1007/978-3-642-30820-8_50
Design for Testability for Micro-mechatronic Systems
Lanza, G.; Blank, T.; Haefner, B.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, 11.-13. März 2013, 283–292, Springer Verlag. doi:10.1007/978-3-642-30817-8_28
Reliability 2.0 - Challenges in Reliability of Future Production Systems
Lanza, G.; Stricker, N.
2013. International Applied Reliability Symposium, 17.04.2013 - 19.04.2013, Berlin, Deutschland, 441–453
Measuring Global Production Effectiveness
Lanza, G.; Stoll, J.; Stricker, N.; Peters, S.; Lorenz, C.
2013. Procedia CIRP, 7, 31–36. doi:10.1016/j.procir.2013.05.006
Measurement Setup for the Experimental Evaluation of Micro Gears
Lanza, G.; Haefner, B.
2013. 13th International Conference of the European Society for Precision Engineering & Nanotechnology, 27.05.2013 - 31.05.2013, Berlin, Germany, 128–131, European Society for Precision Engineering and Nanotechnology (euspen)
Markovian Decision Processes and Queueing Theory for Investment Planning of Production Systems
Peters, S.; Lanza, G.
2013. 9th Conference on Stochastic Models of Manufacturing and Service Operations, SMMSO 2013, 25.05.2013 - 30.05.2013, Seeon, Deutschland. Hrsg.: H. Tempelmeier, 167–174, Katholische Universität Eichstätt-Ingolstadt (KU)
Innovative Quality Strategies for Global Value-Added-Networks
Lanza, G.; Book, J.; Kippenbrock, K.; Saxena, A.
2013. Robust Manufacturing Control : Proceedings of the CIRP Sponsored Conference RoMaC 2012, Bremen, Germany, 18th-20th June 2012. Ed.: K. Windt, 271–286, Springer Verlag. doi:10.1007/978-3-642-30749-2_20
Optimization model for value added networks of globally operating companies
Lanza, G.; Ruhrmann, S.; Stricker, N.; Kohl, M.
2013. 22nd International Conference on Production Research, 28.07.2013 - 01.08.2013, Iguassu Falls, Brasilien, 1–7
Automated optical detection of particles and defects on a Li-Ion-cell surface using a single-point analysis
Lanza, G.; Koelmel, A.; Peters, S.; Sauer, A.; Stockey, S.
2013. 2013 IEEE International Conference on Automation Science and Engineering (CASE), 17th -20th August 2013 Madison, USA, 675–680, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/CoASE.2013.6653950
Timesaving quality assurance for preforming in the automotive serial production of CFRP
Lanza, G.; Brabandt, D.; Bingemann, P.
2013. 19th Interantional Conference on Composite Materials, 28.07.2013 - 02.08.2013, Montreal, Kanada. Ed.: Pascal Hubert, 8309–8317, BytePress
Method for the identification of point in time for changes in production networks
Lanza, G.; Moser, R.; Jondral, A.
2013. 6th IFAC/ACM Conference on Management and Control of Production and Logistics, MCPL 2013; Fortaleza, Ceara; Brazil; 11 September 2013 - 13 September 2013. Ed.: S. Filho, 87–94, International Federation of Automatic Control. doi:10.3182/20130911-3-BR-3021.00008
Areal Characterization of Micro Gears by means of Computed Tomography
Lanza, G.; Haefner, B.
2013. 11th International Symposium on Measurement and Quality Control (ISMQC), 11.09.2013 - 13.09.2013, Krakau, Polen, 82–85
Monetary Assessment of an Integrated Lean-/Green-Concept
Lanza, G.; Greinacher, S.; Jondral, A.; Moser, R.
2013. 11th Global Conference on Sustainable Manufacturing, 23.09.2013 - 25.09.2013, Berlin, Germany. Ed.: G. Seliger, 548–553, Universitätsverlag der TU Berlin
Innovative product-services for robust global supply chains
Lanza, G.; Stricker, N.; Stoll, J.
2013. 17th Cambridge International Manufacturing Symposium, 19.09.2013 - 20.09.2013, Cambridge, United Kingdom, Disruptive supply network models in future industrial systems: configuring for resilience and sustainability, 1–12, Cambridge University
Assessment of Lamination Stack Production
Lanza, G.; Stoll, J.; Krämer, A.
2013. 3rd International Electric Drives Production Conference (E|DPC), 29.-30.10.2013, Nuremberg, Germany, Proceedings, 52–59, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689725
Configuration of a multi-use battery production
Lanza, G.; Sauer, A.; Kölmel, A.
2013. Enabling Manufacturing Competitiveness and Economic Sustainability : Proceedings of the 5th International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 2013), Munich, Germany, October 6th-9th, 2013. Ed.: M. F. Zaeh, 473–478, Springer Verlag. doi:10.1007/978-3-319-02054-9_80
Methodology for the lifetime prediction of micro gears dependent on present shape deviations and the material structure
Lanza, G.; Haefner, B.; Gibmeier, J.
2013. Safety, reliability and risk analysis: beyond the horizon: proceedings of the 22nd European Safety and Reliability Conference, Esrel 2013, Amsterdam, the Netherlands, 29th September - 2nd October 2013 ed. R. D. J. M. Steenbergen ..., 2663–2669, CRC Press
Flächenhafte Messung von Mikrozahnrädern mittels Computertomographie und Koordinatenmesstechnik
Lanza, G.; Haefner, B.
2013. 6. Kolloquium Mikroproduktion, 8.10.2013, Braunschweig, Deutschland, 1–6, Technische Universität Braunschweig
Concept of an intelligent Production Control for Global Manufacturing in dynamic Environments based on Rescheduling
Lanza, G.; Stricker, N.; Moser, R.
2013. IEEE Industrial Conference on Industrial Engineering and Engineering Management, 10.12.2013 - 13.12.2013, Bangkok, Thailand, 1–5, Institute of Electrical and Electronics Engineers (IEEE)
Assessment of lean and green strategies by simulation of manufacturing systems in discrete production environments
Diaz-Elsayed, N.; Jondral, A.; Greinacher, S.; Dornfeld, D.; Lanza, G.
2013. CIRP annals, manufacturing technology, 62 (1), 475–478. doi:10.1016/j.cirp.2013.03.066
Planung einer wandlungsfähigen Batteriemontage
Lanza, G.; Sauer, A.; Kölmel, A.
2013. wt Werkstattstechnik online, 103 (4), 281–284
TCO 2.0 -Ein Weg zu mehr Transparenz und Kommunikation
Lanza, G.; Appel, D.; Stricker, N.
2013. wt Werkstattstechnik online, 7/8, 605–609
Datenfusion bei der Messung von Mikrozahnrädern
Lanza, G.; Häfner, B.
2013. wt Werkstattstechnik online, 11/12, 841–846
Potential for Standardization and Guidelines of Product and Production Features of Electric Drives - Aggregation of survey results for possible electric drive standardization features
Sell-Le Blanc, F.; Ruprecht, E.; Fleischer, J.; Doppelbauer, M.
2013. 3rd International Electric Drives Production Conference (E|DPC), 29.-30.10.2013, Nürnberg, Deutschland, IEEE, 492–497, IEEE Computer Society. doi:10.1109/EDPC.2013.6689761
Technologieplanung zur automatisierten Fertigung von Preforms für CFK-Halbzeuge
Fleischer, J.; Wagner, H.
2013. Lightweight design, 6 (1), 30–33
Lokale Verstärkungen schnell erzielen
Fleischer, J.; Gebhardt, J.
2013. Maschinenmarkt, 4, 15–17
Trends im Elektromaschinenbau: Herausforderungen und aktuelle Entwicklungen der Produktionstechnik
Peter, M.; Sell-Le Blanc, F.; Fleischer, J.
2013. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 108 (6), 435–439
Gripping Technology for Carbon Fibre Material
Fleischer, J.; Ochs, A.; Förster, F.
2013. CIRP International Conference on Competitive Manufacturing, 30.01.2013, Stellenbosch, Südafrika, 65–71, Universität Stellenbosch
Increase of maintenance efficiency by a hybrid diagnosis and prognosis approach
Hennrich, H.; Fleischer, J.
2013. Lamdamap 10th International Conference, 20.03. - 21.03.2013, Buckinghamshire, UK, Laser Metrology and Performance X, 7–17
Design approach for an adaptable highly integrated hydraulic feed axis
Bauer, J.; Fleischer, J.
2013. Smart Product Engineering : Proceedings of the 23rd CIRP Design Conference, Bochum, Germany, March 11th - 13th, 2013, 593–602, Springer Verlag. doi:10.1007/978-3-642-30817-8_58
Active piezoelectric 2D-fiber-reinforced plastic spring for the actuation of a vibratory feeder
Leberle, U.; Fleischer, J.
2013. ASPE 2013 Spring Topical Meeting MIT Laboratory for Manufacturing and Productivity Annual Summit, 21.04.2013 - 23.04.2013, Boston, USA. Ed.: American Society for Precision Engineering, 131–135, 3M Company
Quality Assurance of Micro-Gears via 3D Surface Characterization
Lanza, G.; Viering, B.
2013. Product Lifecycle Management: Geometric Variations, 419–429, John Wiley and Sons. doi:10.1002/9781118557921.ch24
Surface layer states of worn uncoated and TiN-coated WC/Co-cemented carbide cutting tools after dry plain turning of carbon steel
Kümmel, J.; Poser, K.; Zanger, F.; Michna, J.; Schulze, V.
2013. Advances in Tribology, 2, 519686/1–10. doi:10.1155/2013/519686
Inluence of cutting parameters, tool coatings and friction on the process heat in cutting processes and phase transformations in workpiece surface layers
Schulze, V.; Michna, J.; Zanger, F.; Faltin, C.; Maas, U.; Schneider, J.
2013. HTM - Journal of Heat Treatment and Materials, 68 (1), 22–31
Technology selection for electric drive production with a game theoretic approach
Lanza, G.; Stoll, J.; Gerbe, S.
2013. Advanced materials research, 769, 303–310. doi:10.4028/www.scientific.net/AMR.769.303
Flexible Montage leichter Rahmenstrukturen
Fleischer, J.; Lanza, G.; Otter, M.; Elser, J.
2013. VDI-Z integrierte Produktion, 2013 (6), 28–30
Preforming von CFK-Halbzeugen im Spannungsfeld der Stückzahl - Effiziente Herstellung von Preforms mit endkonturnaher Geometrie
Wagner, H.; Brabandt, D.; Lanza, G.; Fleischer, J.
2013. VDI-Z integrierte Produktion, 6, 64–66
Maschinenkomponenten mit adaptierbarer Eigenfrequenz
Koch, S.-F.; Bauer, J.; Horsch, J.; Wagner, H.; Fleischer, J.
2013. ZWF Zeitschrift für Wirtschaftlichen Fabrikbetrieb, 108 (7-8), 487–491
CFK als "Enabler" im Werkzeugmaschinenbau
Fleischer, J.; Bauer, J.; Koch, S.-F.; Wagner, H.
2013. VDI-Z integrierte Produktion, 8 (7), 74–76
Method to compensate production related deviations for the assembly of space-frame-structures
Fleischer, J.; Otter, M.; Beuke, F.
2013. Production Engineering, 8 (1-2), 206–217. doi:10.1007/s11740-013-0501-3
Automated Modular Part-flexible Feeding System for Micro Parts
Leberle, U.; Fleischer, J.
2013. Proceedings of the 13th euspen International Conference, 27.05.2013 - 31.05.2013, Berlin, Deutschland, 27–29, European Society for Precision Engineering and Nanotechnology (euspen)
Automatische Herstellung von Preforms für schalenförmige CFK-Bauteile durch Anwendung einer featurebasierten Technologieplanung
Fleischer, J.; Wagner, H.
2013. 19. Symposium Verbundwerkstoffe und Werkstoffverbunde, 03.07.2013 - 05.07.2013, Karlsruhe, Deutschland. Hrsg.: A. Wanner, 944–959
Analysis of the influence of assembly force on joint strength during MIM sinter joining
Klimscha, K.; Fleischer, J.
2013. EURO PM2013 congress & exibition, 15.-18.09.2013, Gothenburg, Sweden, European Powder Metallurgy Association, 311–316
Automatisiertes MIM-Sinterfügen - Potentiale in der Mikroproduktion
Klimscha, K.; Fleischer, J.
2013. 6. Kolloquium Mikroproduktion Braunschweig 8. Oktober 2013. Hrsg.: Rainer Tutsch, 33, Shaker Verlag
Material based process model for linear noncircular coil winding processes with large wire gauge: Investigation of wire material influences on the winding process and compensation approaches
Sell-Le Blanc, F.; Ruprecht, E.; Fleischer, J.
2013. Electric Drives Production Conference (EDPC), 2013 3rd International, 1–6, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2013.6689731
Experimental Investigation of Metal Inserts Embedded in Composite Parts Manufactured by the RTM Process
Fleischer, J.; Gebhardt, J.
2013. 13th Japan International SAMPE Symposium and Exhibition, 11.11.-13.11.2013, Nagoya, Japan, A Great Bridge from Practice and high Volume to Science and high Performance, 1–6
Roadmap zur Standardisierung von Produkt- und Produktionsmerkmalen des elektrischen Antriebsstranges
Sell-Le Blanc, F.; Ruprecht, E.; Doppelbauer, M.; Fleischer, J.
2013. FVA-Informationstagung, 26-27.11.2013, Würzburg, Deutschland, FVA-Forschungsreport 2013
Life Cycle Performance 4.0 - Strategische und technische Lösungen für den intelligenten Betrieb von Maschinen und Anlagen
Fleischer, J.; Lanza, G.; Appel, D.; Stricker, N.; Hennrich, H.; Herder, S.
2013. wt Werkstattstechnik online, 103 (2), 124–129
Joining automotive space frame structures by filament winding
Fleischer, J.; Schaedel, J.
2013. CIRP Journal of Manufacturing Science and Technology, 6 (2), 98–101. doi:10.1016/j.cirpj.2013.02.003
Planar positioning stage for micro machining
Bauer, J.; Kern, D.; Ayhan, S.; Scherr, S.; Fleischer, J.; Seemann, W.; Zwick, T.
2013. Production Engineering, 7 (5), 511–516. doi:10.1007/s11740-013-0474-2
Handhaben von Batteriezellen
Fleischer, J.; Ruprecht, E.; Haag, S.
2013. wt Werkstattstechnik online, 9, 644–648
Intelligenter piezoelektrischer phasenflexibler Schwingförderer
Fleischer, J.; Leberle, U.
2013. Konstruktion, 65 (10), 91–95
Robotergestütztes Führen von Strangpressprofilen
Fleischer, J.; Dosch, S.
2013. Werkstattstechnik, 9, 693–698
Automated laser power control for roughing and finishing in micro laser machining
Schulze, V.; Weber, P.
2012. Proceedings of the 9th International Conference on Multi-Material Micro Manufacture, 9th - 11th October 2012, Vienna, Austria, 43–46
Flexible production lines for series production of automotive electric drives
Lanza, G.; Stoll, J.; Koelmel, A.; Peters, S.
2012. 2nd International Electric Drives Production Conference (E|DPC) 2012, 15th -18th October 2012, Nuremberg, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/EDPC.2012.6425088
Simulation of personnel requirements during production ramp-up
Lanza, G.; Sauer, A.
2012. Production Engineering - Research and Development, 6 (4-5), 395–402. doi:10.1007/s11740-012-0394-6
Highly integrated hydraulic feed axis
Fleischer, J.; Bauer, J.
2012. 13th International Conference on New Actuators & 7th International Exhibition on Smart Actuators and Drive Systems (Actuator 12). Conference Proceedings. Ed.: H. Borgmann, 734–737, Messe Bremen
Zielsystembasiertes Qualitätsmanagement in globalen Supply Chains
Lanza, G.; Book, J.; Holtz, I. Freiin vom
2012. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 107 (4), 244–249. doi:10.3139/104.110744
Combined 3D Micro Structuring of Ceramic Green TapeUsing Punching, Embossing and Laser Processing
Hagen, G.; Kopp, T.; Ziesche, S.; Partsch, U.; Ruprecht, E.
2012. IMAPS/ACerS 8th International Conference and Exhibition on Ceramic Interconnect and Ceramic Microsystems Technologies 2012 (CICMT 2012). Proceedings, IMAPS/ACer8, Curran
Automatisierte Produktionsprozesse und -anlagen für den hybriden Leichtbau
Fleischer, J.; Schädel, J.; Gebhardt, J.
2012. Faserverbundleichtbau - Methoden, Werkstoffe und Produktion, 35–36, Society for the Advancement of Material and Process Engineering (SAMPE)
Bericht der Promotorengruppe Mobilität : Empfehlungen zum Zukunftsprojekt "Nachhaltig bewegt, energieeffizient mobil"
Kreimeyer, A.; Lanza, G.; Weber, T.; Wittenstein, M. (Eds.)
2012. Forschungsunion Wirtschaft - Wissenschaft
Valuation of increased production system performance by integrated production systems
Lanza, G.; Jondral, A.; Drotleff, U.
2012. Production Engineering - Research and Development, 6 (1), 79–87. doi:10.1007/s11740-011-0359-1
Reliability-dependent choice of spare part provision and maintenance strategies at optimal cost as an offered service
Lanza, G.; Appel, D.
2012. 11th International Probabilistic Safety Assessment and Management Conference and The Annual European Safety and Reliability Conference (PSAM11 ESREL 2012), 212–221, Curran
Economic Potential of Reliability Data in the Application of Spare Part Provision
Lanza, G.; Appel, D.
2012. International Applied Reliability Symposium Europe 2012, 44 S
Sustainable Automated Production of Fiber Reinforced Plastics (FRP) through Inline Quality Assurance
Lanza, G.; Brabandt, D.
2012. 10th Global Conference on Sustainable Manufacturing (GCSM) 2012, 10th Global Conference on Sustainable Manufacturing, Conference, in-person 31st October - 2nd November 2012, Istanbul Turkey, 123–127
Quality Risk Management in Global Supply Networks: An Agent-Based Approach
Book, J.; Kumar, M.; Lanza, G.; Srai, J.
2012. 16th Cambridge International Manufacturing Symposium 2012, 1–40. doi:10.13140/RG.2.1.2139.2406
Total cost analysis of process time reduction as a green machining strategy
Helu, M.; Behmann, B.; Meier, H.; Dornfeld, D.; Lanza, G.; Schulze, V.
2012. D. Dornfeld & B. S. Linke (Eds.), Leveraging Technology for a Sustainable World. Hrsg.: Dornfeld, David; Linke, Barbara S. Proceedings of the 19th CIRP Conference on Life Cycle Engineering, University of California at Berkeley, Berkeley, USA, May 23 - 25, 2012, 299–304, Springer Berlin Heidelberg. doi:10.1007/978-3-642-29069-5_51
Quality Strategies for Supply Chains
Lanza, G.; Book, J.
2012. Global Conference on Operations and Supply Chain Management (GCOM) 2012, 12th-13th March 2012, Bandung, Indonesia, 1–15
Evaluating Procurement Objects and Suppliers in Low-Cost Countries with a Focus on Quality
Lanza, G.; Ruhrmann, S.
2012. E. Esposito (Ed.), Purchasing & Supply Management in a Changing World. Hrsg.: Emilio Esposito, 57, Elsevier
Strategic Planning of Global Changeable Production Networks
Lanza, G.; Moser, R.
2012. (G. Chryssolouris & D. Mourtzis, Eds.) Procedia CIRP, 3, 257–262. doi:10.1016/j.procir.2012.07.045
Wandlungstreiber global agierender Produktionsunternehmen: Sammlung, Klassifikation und Quantifizierung
Lanza, G.; Moser, R.; Ruhrmann, S.
2012. wt Werkstattstechnik online, 102 (4), 200–205
Globalverteile Produktionssysteme: Pragmatische Bewertung in der variantenreichen Großserienfertigung
Lanza, G.; Moser, R.; Book, J.; Braun, F.
2012. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 107 (9), 623–627
Improved Calculation of Weibull distributions for deficient industrial data in the context of Life Cycle Costs
Lanza, G.; Stengele, G.; Stricker, N.
2012. 10th Global Conference on Sustainable Manufacturing (GCSM) 2012, 31st October - 2nd November 2012, 225–231
Optimization of Production Ramp-Up by using a Simulation for Personnel Requirements Planning
Lanza, G.; Sauer, A.
2012. 24th European Modeling & Simulation Symposium 2012, 19th - 21st September 2012, Vienna, Austria. Ed.: Felix Breitenecker, 32–37, Curran
Introducing Scenario Planning to manage Supply Chains in an uncertain environment
Daum, C.; Moser, R.; Book, J.; Lanza, G.; Fleet, D.
2012. Capturing value in international manufacturing and supply networks: new models for a changing world. Ed.: J. Singh, 17 S., Institute for Manufacturing
Life cycle performance in manufacturing = Life Cycle Performance in der Produktionstechnik: Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7/8), 513–517
Effects of future mobility on automotive production
Peters, S.; Lanza, G.; Stockey, S.
2012. Proceedings - 12th Stuttgart International Symposium Automotive and Engine Technology 2012, 13th -14th March 2012, Stuttgart, Germany, 457–466, ATZlive
Produktionstechnik - Empfehlungen und Entwicklungstendenzen
Peters, S.; Lanza, G.
2012. eNOVA-Workshop Elektromobilität in den Städten der Zukunft, 26. Juni 2012, Berlin, 1–26, eNOVA Strategiekreis Elektromobilität
Das Produktionssystem für Batterien
Fleischer, J.; Ruprecht, E.; Baumeister, M.; Haag, S.
2012. Die Zukunft der Fertigungstechnik : Tagungsband Wiener Produktionstechnik-Kongress 2012. Hrsg.: F. Bleichher, 7–16, Neuer Wiss.Verl
Automated Handling of Limp Foils in Lithium-Ion-Cell Manufacturing
Fleischer, J.; Ruprecht, E.; Baumeister, M.; Haag, S.
2012. Leveraging technology for a sustainable world : Proceedings of the 19th CIRP Conference on Life Cycle Engineering, Berkeley, CA, May 23-25, 2012. Ed.: D.A. Dornfeld, 353–356, Springer Verlag
Life Cycle Performance in der Produktionstechnik : Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz = Life cycle performance in manufacturing
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7-8), 513–517
Overcoming the challenges of automated preforming of semi-finished textiles
Fleischer, J.; Lanza, G.; Brabandt, D.; Wagner, H.
2012. SAMPE Europe Symposium 2012 (SEMAT 12) : “Symposium on Automation of Advanced Composites and its Technology”, Munich, Germany, 24-25 May 2012. Ed.: M. A. Erath, 114–143, SAMPE Europe Conference Management
Highly integrated piezo-hydraulic feed axis
Fleischer, J.; Bauer, J.
2012. Procedia CIRP, 1 (1), 325–329. doi:10.1016/j.procir.2012.04.058
Assessment of Load-dependent and Condition-oriented Methods for the Lifetime Estimation of Ball Screws
Fleischer, J.; Hennrich, H.
2012. Sustainable Manufacturing. Ed.: G. Seliger, 109–113, Springer Verlag. doi:10.1007/978-3-642-27290-5_16
Experimentelle Untersuchung von Bauteilschädigung und Werkzeugverschleiß bei der FVK-Bearbeitung
Schulze, V.; Klotz, S.; Zanger, F.
2012. Spanende Fertigung : Prozesse, Innovationen, Werkstoffe ; [40 Jahre ISF]. Hrsg.: D. Biermann, 330–337, Vulkan-Verlag
Micro structuring of Zr-based bulk metallic glasses
Schulze, V.; Hoppen, P.; Ruhs, C.; Weber, P.
2012. Proceedings of the 9th International Cenference on Multi-Material Micro Manufacture, 144–147, Verlag Research Publishing
Automated Measurement Data Analysis for Micro Structured Surfaces
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.; Haefner, B.
2012. 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 04.06.2012 - 07.06.2012, Stockholm, Sweden. Vol. 1, 235–238, European Society for Precision Engineering and Nanotechnology (euspen)
Untersuchung der Zerspanung von Metall-Matrix-Verbundwerkstoffen (MMC) mittels Finite-Elemente-Simulationen
Schulze, V.; Zanger, F.
2012. Spanende Fertigung : Prozesse, Innovationen, Werkstoffe ; [40 Jahre ISF]. Hrsg.: D. Biermann, 51–58, Vulkan-Verlag
Development of a microstructured deep rolling tool for generation of nanocrystalline surface layer
Schulze, V.; Hoffmeister, J.; Zanger, F.; Ambrosy, F.; Erz, A.
2012. euspen Topical Meeting: Structured & Freeform Surfaces, 05.12.2012 - 06.12.2012, Teddington, UK, 57–80, Veranstalter European Society for Precision Engineering & Nanotechnology
Spanender Endbearbeitungsprozess zur Modifizierung der Randzonenzustände
Schulze, V.; Ambrosy, F.; Zanger, F.
2012. Konstruktion, (11/12), 14–16
The future of lightweight manufacturing - production-related challenges when hybridizing metals and continuous fiber-reinforced plastics
Fleischer, J.; Ochs, A.; Dosch, S.
2012. International Conference on "New Developments in Sheet Metal Forming", 22.05.2012 - 23.05.2012, Stuttgart, Germany, 51–70, Institute for Metal Forming Technology of University of Stuttgart
Miniaturized piezoelectric vibratory conveyor for the flexible handling of very different small parts
Fleischer, J.; Leberle, U.
2012. EUSPEN 12th International Conference of the European Society for Precision Engineering & Nanotechnology, 04.06.2012 - 07.06.2012, Stockholm, Sweden, 59–62, Sieca Repro
Development of a compact micro machine for the machining of powder-injection moulded (PIM) green compacts
Fleischer, J.; Klimscha, K.; Ströbele, S.
2012. euspen International Conference, 04.06.2012 - 08.06.2012, Stockholm, Schweden, 258–261, Verlag Sieca Repro
Draping strategies and automation solutions for complex CFRP components
Härtel, F.; Wagner, H.; Middendorf, P.; Fleischer, J.
2012. SAMPE Europe 7th SETEC 12, 19.09.2012, Luzern, Schweiz, Advanced Composites - Design & Process for Sustainability, 161–166
Resource Efficient Ball Screw by Adaptive Lubrication
Fleischer, J.; Hennrich, H.; Braun, J.
2012. 10th Global Conference on Sustainable Manufacturing, 31.10.2012 - 02.11.2012, Istanbul, Türkei, Towards Implementing Sustainable Manufacturing, digital
Ressourceneffizienter Kugelgewindetriebdurch adaptive Schmierung
Fleischer, J.; Hennrich, H.; Braun, J.
2012. Tagungsband AKIDA 2012, 9. Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 14.11.2012 - 15.11.2012, Aachen, Deutschland. Hrsg.: K. Nienhaus, 573–582, Verlag Zillekens
High Speed Broaching of Case Hardening Steel SAE 5120
Schulze, V.; Meier, H.; Strauss, T.; Gibmeier, J.
2012. Procedia CIRP, 1 (2012), 431–436. doi:10.1016/j.procir.2012.04.077
Residual stresses under quasi-static and cyclic loading in shot peened Inconel 718
Hoffmeister, J.; Schulze, V.; Hessert, R.; Koenig, G.
2012. International Journal of Materials Research, 2012 (1), 66–72. doi:10.3139/146.110630
Compensation of shape deviations for the automated assembly of space frame structures
Fleischer, J.; Ochs, A.; Koch, S. F.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 105–108, University of Michigan
Ultrasonic-assisted adhesive handling of limp and air-permeable textile semi-finished products in composites manufacturing
Fleischer, J.; Ochs, A.; Koch, S. F.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 7–10, University of Michigan
Spatial alignment of joining partners without fixtures, based on component-inherent markings
Fleischer, J.; Elser, J.
2012. Technologies and Systems for Assembly Quality, Productivity and Customization: Proceedings of the 4th CIRP Conference on Assembly Technologies and Systems, Ann Arbor, Michigan, USA, May 20-22, 2012. Ed.: S. J. Hu, 17–20, University of Michigan
Funktionsorientierte Bewertung bei der Druckwalzenherstellung
Tillmann, A.; Weckenmann, A.; Hartmann, W.; Schmidt, H.; Schulze, V.; Stockey, S.; Chlipala, M.
2012. Merkmalbasiert geregelte Fertigungsprozesse für die beherrschte Herstellung funktionaler Produkteigenschaften von mikrostrukturierten Bauteilen: Ergebnisbericht des BMBF Verbundprojektes FunkProMikro. Hrsg.: T. Wiedenhöfer, 57–76, Apprimus
Funktionsorientierte Bewertung und deren Nutzen für die Kurbelwellenfertigung
Zimmermann, W.; Holdik, K.; Happek, B.; Schreiber, L.; Weber, M.; Weckenmann, A.; Hartmann, W.; Schmidt, H.; Schulze, V.; Chlipala, M.; Stockey, S.; Pabst, R.
2012. Merkmalbasiert geregelte Fertigungsprozesse für die beherrschte Herstellung funktionaler Produkteigenschaften von mikrostrukturierten Bauteilen. Hrsg.: T. Wiedenhöfer, 17–38, Apprimus Wissenschaftsverlag
Produkte und Produktionssysteme integrativ konzipieren : Modellbildung und Analyse in der frühen Phase der Produktentstehung
Behmann, B.; Rühl, J.; Brandis, R.; Deppe, U.; Dorociak, R.; Eckstein, J.; Günther, T.; Hellenbrand, D.; Herm, M.; Herrmann, H.-G.; Kissel, M.; Mörtl, M.; Mülder, A.; Nordsiek, D.; Nyßen, A.; Olbrich, R.; Peters, S.; Schullerus, W.; Stollt, G.; Terfloth, A.
2012. (J. Gausemeier, G. Lanza & U. Lindemann, Eds.), Carl Hanser Verlag. doi:10.3139/9783446429857
Handlungsempfehlung zur Gestaltung globaler Produktionsnetzwerke
Book, J.; Bunse, K.; Grauer, M.; Klemke, T.; Tilgner, K.; Ude, J.
2012. Strategien und nachhaltige Wirtschaftlichkeit in der Fabrikplanung : Standorte gezielt auswählen, Investitionen sicher planen, 1–71, Beuth Verlag GmbH
Prozessübergreifende Abtragregelung für die Mikrobahnerosion durch die Nutzung konfokaler Weißlichtsensorik
Schulze, V.; Ruhs, C.
2012. Jahrbuch Optik und Feinmechanik, 239–245, OPTIK-Verl
Produktanpassungen an regionale Bedingungen
Ruhrmann, S.
2012. China - erfolgreiche Beschaffungs- und Produktionsstrategien. Hrsg.: J. Fleischer, 78–92, Shaker Verlag
Wissenstransfer technischer Dienstleistungen im Maschinenbau - Projekt WiTal
Lanza, G.; Appel, D.; Behmann, B.
2012. IHK Magazin Nordschwarzwald, 2 (1/2), 54–55
Strategien zur Bewältigung volatiler Absatzmärkte: Investitions- und Kapazitätsplanung in der mittelständischen Automobilindustrie
Lanza, G.; Peters, S.; Schmollinger, S.; Günther, T.
2012. VDI-Z integrierte Produktion, 154 (3), 59–62
Integrated capacity planning over highly volatile horizons
Lanza, G.; Peters, S.
2012. CIRP Annals - Manufacturing Technology, 61 (1), 395–398. doi:10.1016/j.cirp.2012.03.057
Hybride Modellierung zur Auslegung und Leistungsmessung in Produktionssystemen
Stoll, J.; Özden, E.; Jondral, A.; Furmans, K.; Lanza, G.
2012. wt Werkstattstechnik online, 102 (4), 217–221
Impact of green machining strategies on achieved surface quality
Helu, M.; Behmann, B.; Meier, H.; Dornfeld, D.; Lanza, G.; Schulze, V.
2012. CIRP annals, manufacturing technology, 61 (1), 55–58. doi:10.1016/j.cirp.2012.03.092
Methodik für qualitätsoptimale globale Beschaffung
Lanza, G.; Ruhrmann, S.; Jondral, A.
2012. Qualität und Zuverlässigkeit, 6 (6), 58–59
Adaptronical compensation of geometrical machine errors
Fleischer, J.; Munzinger, C.; Weis, M.; Herder, S.
2012. Production Engineering, 6 (3), 303–309. doi:10.1007/s11740-012-0381-y
Life Cycle Performance in der Produktionstechnik: Ausgewählte Ansätze zur Steigerung von Zuverlässigkeit und Effizienz = Life cycle performance in manufacturing
Lanza, G.; Fleischer, J.; Schulze, V.; Appel, D.; Behmann, B.; Bertsch, D.; Braun, J.; Hennrich, H.; Herder, S.; Meier, H.; Peters, S.; Stoll, J.; Stricker, N.
2012. wt Werkstattstechnik online, 102 (7/8), 513–517
Dynamic optimization of manufacturing systems in automotive industries
Lanza, G.; Peters, S.; Herrmann, H.-G.
2012. CIRP journal of manufacturing science and technology, 5 (4), 235–240. doi:10.1016/j.cirpj.2012.09.002
Klein, aber fein
Fleischer, J.; Bauer, J.
2012. O + P, (1-2), 21–23
Produktionstechnische Herausforderungen der Elektromobilität
Fleischer, J.; Lanza, G.; Schulze, V.; Sauer, A.; Sell-Le Blanc, F.
2012. VDI-Z integrierte Produktion, 154 (1-2), 16
Produktionstechnische Handlungsbedarfe der Batteriemodulfertigung
Fleischer, J.; Ruprecht, E.; Haag, S.
2012. ZWF, 107 (9), 637–641
Entwicklung von hochbelastbaren Krafteinleitungselementen für den hybriden Leichtbau
Fleischer, J.; Elser, J.; Gebhardt, J.; Weingärtner, T.
2012. Lightweight design, 5 (5), 32–37. doi:10.1365/s35725-012-0020-8
Antriebsmodul für die Mikrobearbeitung - Parallelkinematisches hydraulisches Antriebsmodul mit Radarpositionsmessung
Fleischer, J.; Seemann, W.; Zwick, T.; Ayhan, S.; Bauer, J.; Kern, D.; Scherr, D.
2012. wt Werkstattstechnik online, 102 (11/12), 724–729
Fräsen mit flüssigem Stickstoff als Kühlmedium
Schulze, V.; Michna, J.; Meier, H.; Pabst, R.; Watts, D.; Lang, H.
2012. wt Werkstattstechnik online, 102 (1/2), 52–55
Increase of process reliability in the micro-machining processes EDM-milling and laser ablation using on-machine sensors
Schulze, V.; Weber, P.; Ruhs, C.
2012. Journal of Materials Processing Technology, 212 (3), 625–632. doi:10.1016/j.jmatprotec.2011.09.014
Analysis of surface layer characteristics for sequential cutting operations
Schulze, V.; Osterried, J.; Strauß, T.; Zanger, F.
2012. HTM Journal of heat treatment and materials, 67 (6), 347–356
Prozesskette zur Herstellung schichtbasierter Systeme mit integrierten Kavitäten. PhD dissertation
Ruprecht, E. M. R.
2012. Shaker Verlag
Examination of component state changes caused by machining with multiedged tools for the example of broaching
Schulze, V.; Pabst, R.; Osterried, J.
2012. Proceedings of the Summer School 2011. Graduate School 1483. Process Chains in Production: Interaction, Modelling and Assessment of Process Zones. Ed.: R. Pabst, 43–46, KIT Scientific Publishing
Influence of broaching for evaluation of process chains
Schulze, V.; Pabst, R.; Meier, H.
2012. Proceedings of the Summer School 2011. Graduate School 1483. Process Chains in Production: Interaction, Modelling and Assessment of Process Zones. Ed.: R. Pabst, 29–32, KIT Scientific Publishing
Optical and acoustical process control in hybrid micromachining using a picosecond pulsed UV-laser and micro EDM-milling
Schulze, V.; Weber, P.; Ruhs, C.
2011. 8th International Conference on Multi-Material Micro Manufacture (4M): 8–10 November 2011, Stuttgart, Germany, 83–86. doi:10.3850/978-981-07-0319-6_198
Integration of a picosecond laser system into a machining centre
Schulze, V.; Chlipala, M.; Pabst, R.
2011. ICALEO 2011: 30th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing, Art.-Nr.: M1205, American Institute of Physics (AIP). doi:10.2351/1.5062190
Acoustical focal positioning for micromachining using a picosecond pulsed UV-Laser
Schulze, V.; Weber, P.
2011. ICALEO 2011: 30th International Congress on Laser Materials Processing, Laser Microprocessing and Nanomanufacturing, 966. doi:10.2351/1.5062357
Automatisierte Handhabung und Montage von Folien für schichtbasierte Systeme
Ruprecht, E.
2011. Produktionstechnische Herausforderungen der Elektromobilität: Tagungsband zur wbk-Herbsttagung 2011. Hrsg.: J. Fleischer, 57–68, Shaker Verlag
Development of an Innovative Tension Test Process for the Investigation of Sinter Joined Connections
Fleischer, J.; Klimscha, K.
2011. Euro PM2011 Proceedings: Powder Injection Moulding. Ed.: European Powder Metallurgy Association (EPMA), 177–182, European Powder Metallurgy Association (EPMA)
Sensor/actuator integration with piezoelectric transducers for static and quasistatic force control
Fleischer, J.; Herder, S.; Dosch, S.
2011. Adaptronic Congress 2011: Aktive Systeme für dynamische Märkte ; 7–8 Eptember 2011, Darmstadt, 160–167
Research Training Group 1483 - Process chains in manufacturing: Interaction, modelling and evaluation of process zones
Schulze, V.; Pabst, R.; Meier, H.
2011. Proceedings / 3rd International Conference on Distortion Engineering 2011 : Bremen, Germany, 14 - 16 September 2011. Ed.: H.-W. Zoch, 421–428, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
Influence of multiple chip formation on surface layer conditions in a simulative broaching study
Schulze, V.; Osterried, J.; Meier, H.
2011. Proceedings / 3rd International Conference on Distortion Engineering 2011 : Bremen, Germany, 14 - 16 September 2011. Ed.: H.-W. Zoch, 481–488, Leibniz-Institut für Werkstofforientierte Technologien (IWT)
Automated supply of micro parts based on the micro slide conveying principle
Fleischer, J.; Herder, S.; Leberle, U.
2011. Proceedings of 61st CIRP General Assembly Hrsg.: Elsevier, 60 (1), 13–16. doi:10.1016/j.cirp.2011.03.004
Self-Calibrating Doppler Global Velocimeter with Laser Frequency Modulation
Fischer, A.; Sell, F.; Büttner, L.; Czarske, J.
2011. Opto Proceedings, 66–71
Design of a molding process for Be-Alloys capable of series production
Ruprecht, E.; Kräher, C.
2011, May. 3D-Festival BEYOND (2011), Karlsruhe, Germany, May 27–29, 2011
Handling limp green tapes
Ruprecht, E.
2011
FE analysis on the influence of sequential cuts on component conditions for different machining strategies
Schulze, V.; Osterried, J.; Strauß, T.
2011. 1st CIRP Conference on Surface Integrity (CSI), 19, 318–323. doi:10.1016/j.proeng.2011.11.119
Company-specific quantitative evaluation of lean production methods
Peter, K.; Lanza, G.
2011. Production engineering, 5 (1), 81–87. doi:10.1007/s11740-010-0276-8
3D-FEM Modeling of Gear Skiving to Investigate Kinematics and Chip Formation Mechanisms
Schulze, V.; Kühnewein, C.; Autenrieth, H.
2011. Advanced materials research, 223, 46–55. doi:10.4028/www.scientific.net/AMR.223.46
Advanced steps to optimize the serviceability
Lanza, G.; Behmann, B.
2011. J. Frick & B. T. Laugen (Eds.), Advances in Production Management Systems. Value Networks: Innovation, Technologies, and Management Hrsg.: J. Frick, Springer
How Can Machine Tool and Plant Manufacturers Increase the Trustability of the Needed Reliability Figures?
Lanza, G.; Appel, D.; Werner, P.
2011. 2011 Symposium Proceedings: International Applied Reliability Symposium Europe 2011, 1–43, ReliaSoft Corporation
Data Mining Approach for Identifying Optimal Process Parameters in Micro-Manufacturing
Lanza, G.; Fleischer, J.; Viering, B.; Klimscha, K.; Kippenbrock, K.; Stockey, S.
2011. P. Shore, H. Spaan, T. Burke & H. van Brussel (Eds.), 11th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2011. Hrsg.: P. Shore, 467–470, European Society for Precision Engineering and Nanotechnology (euspen)
Anwendung von Axiomatic Design zur Entwicklung von Wärmetauschersystemen
Hermann, H.; Eckstein, J.; Lanza, G.; Peters, S.; Behmann, B.; Roth, J.
2011. J. Gausemeier, F. Rammig, W. Schäfer & A. Traechtler (Eds.), Entwurf mechatronischer Systeme: Grundlagen, Methoden und Werkzeuge ; Adaption, Selbstoptimierung und Verlässlichkeit ; Integration Mechanik und Elektronik, Miniaturisierung: 8. Paderborner Workshop Entwurf Mechatronischer Systeme, 19. und 20. Mai 2011, Heinz-Nixdorf-MuseumsForum ; [Wissenschaftsforum Intelligente Technische Systeme. Heinz-Nixdorf-Institut, Universität Paderborn].. Hrsg.: Jürgen Gausemeier, 123–132, Universität Paderborn
Evaluating trade-offs between sustainability, performance, and cost of green machining technologies
Helu, M.; Rühl, J.; Dornfeld, D.; Werner, P.; Lanza, G.
2011. Glocalized Solutions for Sustainability in Manufacturing. Hrsg.: Jürgen Hesselbach, Christoph Herrmann. Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011, 195–200, Springer. doi:10.1007/978-3-642-19692-8_34
Prognose des Driftverhaltens getakteter Montagelinien - Ein Warteschlangenmodell zur Analyse von Arbeitsplätzen bei Variantenfließmontage
Gans, J.; Lanza, G.; Mueller, R.; Peters, S.; Schoen, L.
2011. wt Werkstattstechnik online, 101 (3), 162–166
Zukunftsthemen der Fabrik - Wohin geht der Trend? Ergebnisse einer umfangreichen Online-Umfrage des VDI-Fachausschusses Fabrikplanung
Heinen, T.; Peter, K.; Erlach, K.; Nyhuis, P.; Lanza, G.; Westkämper, E.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 405–409. doi:10.3139/104.110316
Modeling and Simulation of Value Added Networks under Consideration of Individual Target Systems using Software Agents
Lanza, G.; Book, J.
2011. T. Krause, D. Spath & R. Ilg (Eds.), 21st International Conference on Production Research: Innovation in Product and Production (ICPR) 2011. Hrsg.: Krause, T.; Spath, Dieter; Ilg, Rolf, Held 31 July - 4 August 2011, Stuttgart, Germany, 2 235, Fraunhofer Verlag
Simulation of Life Cycle Costs of a Product Service System
Lanza, G.; Behmann, B.; Werner, P.; Voehringer, S.
2011. J. Hesselbach & C. Herrmann (Eds.), Functional Thinking for Value Creation. Hrsg.: Hesselbach, Juergen; Herrmann, Christoph. Proceedings of the 3rd CIRP International Conference on Industrial Product Service Systems, Technische Universität Braunschweig, Braunschweig, Germany, May 5th - 6th, 2011, 159–164, Springer Verlag. doi:10.1007/978-3-642-19689-8_29
Capability Assessment and Valuation of the Implementation of Lean Production Methods in Turbulent Environments
Lanza, G.; Jondral, A.; Book, J.
2011. H. A. El Maraghy (Ed.), Enabling Manufacturing Competitiveness and Economic Sustainability Hrsg.: El Maraghy, Hoda A., 524–529, Springer Verlag
Quality Assurance in the Production of Semi-Finished SMC and BMC
Lanza, G.; Stockey, S.; Ertel, A.
2011. S.-W. Kim (Ed.), The 10th International Symposium on Measurement Technology and Intelligent Instruments (ISMTII 2011) : [held at KAIST, Daejeon, South Korea, on 29 June - 2 July 2011] / [Ed.. Seung-Woo Kim], 211, Institute of Physics Publishing Ltd (IOP Publishing Ltd)
Warranty cost improvement of machine tools during the bidding process and operation
Lanza, G.; Werner, P.; Behmann, B.; Appel, D.
2011. Proceedings - Annual Reliability and Maintainability Symposium 2011. Hrsg.: IEEE, 1–5, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2011.5754512
Increased trustability of reliability prognoses for machine tools
Lanza, G.; Werner, P.; Appel, D.; Behmann, B.
2011. Glocalized Solutions for Sustainability in Manufacturing Proceedings of the 18th CIRP International Conference on Life Cycle Engineering, Technische Universität Braunschweig, Braunschweig, Germany, May 2nd - 4th, 2011, 225–228, Springer. doi:10.1007/978-3-642-19692-8_39
Produktionstechnik: Enabler der Elektromobilität
Lanza, G.; Peters, S.
2011. Tagungsband VDMA Tagung: Elektromobilität und die Montage- und Handhabungstechnik
Dynamic Optimization of Manufacturing Systems to Minimize Life Cycle Costs
Lanza, G.; Peters, S.
2011. N. Duffie (Ed.), Proceedings of the 44th CIRP Conference on Manufacturing Systems (ICMS 2011); Madison, Wisconsin, June 1-3, 2011. Ed.: N. Duffie, Elsevier
Chancen und Risiken des deutschen Maschinen- und Anlagenbaus in der chinesischen Automobilindustrie
Lanza, G.; Schuler, D.; Ender, T.; Peters, S.
2011. Karlsruher Institut für Technologie (KIT)
Ramp-Up Optimization by Process Simulation
Lanza, G.; Sauer, A.
2011. Proceedings 1st International Conference on Ramp-Up Management 2011, WZLforum gGmbH
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. A. Weckenmann (Ed.), Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen Hrsg.: Weckenmann, Albert, 5–18, Shaker Verlag
Mit hoher Flexibilität und Genauigkeit: Automatisierte Kleinserienmontage von Rahmenstrukturen
Fleischer, J.; Lanza, G.; Elser, J.; Otter, M.
2011. VDI-Z Integrierte Produktion, 153 (9), 99–101
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen Hrsg.: A. E. Tekkaya, 339–362, VDI Verlag
Quantitative Analyse stochastischer Einflüsse auf die Leistungsfähigkeit von Produktionssystemen
Lanza, G.; Furmans, K.; Jondral, A.; Peter, K.; Stoll, J.; Özden, E.; Schwab, M.
2011. wt Werkstattstechnik online, 101 (4), 210–213
Modelling of cutting induced surface phase transformations considering friction effects
Schulze, V.; Michna, J.; Schneider, J.; Gumbsch, P.
2011. Procedia engineering, 19, 331–336. doi:10.1016/j.proeng.2011.11.121
Konstrukteurfähigkeiten heute und morgen
Denkena, B.; Albers, A.; Dengler, B.; Hoppen, P.
2011. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (10), 726–730
Manufacturing and Quality Assurance of Micro Structured Crankshaft Bearings
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.
2011. 11th International Conference of the European Society for Precision Engineering & Nanotechnology, 23.05.2011-27.05.2011, Como, Italy. Ed.: H. Spaan .., 183–186, European Society for Precision Engineering and Nanotechnology (euspen)
Simulation of multiple chip formation when broaching SAE5120 low alloy steel
Schulze, V.; Osterried, J.; Meier, H.; Zanger, F.
2011. Advanced materials research, 223, 37–45. doi:10.4028/www.scientific.net/AMR.223.37
Investigation of the machining behavior of metal matrix composites (MMC) using chip formation simulation
Schulze, V.; Zanger, F.; Michna, J.; Ambrosy, F.; Pabst, R.
2011. Advanced Materials Research, 223, 20–209. doi:10.4028/www.scientific.net/AMR.223.20
Support for Micro-Tolerancing through the Feedback of Existing Quality-Related Data to Product Developers
Lanza, G.; Albers, A.; Kippenbrock, K.; Börsting, P.
2011. Proceedings of the 11th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2011. Ed.: H. Spaan, 542–545, European Society for Precision Engineering and Nanotechnology (euspen)
Microstructure and mechanical properties of micro tensile specimens made of CuAl10Ni5Fe4 produced by micro casting
Rögner, J.; Lang, K.-H.; Baumeister, G.; Schulze, V.
2011. Microsystem Technologies, 17 (2), 301–311. doi:10.1007/s00542-011-1234-x
Characterization of the transition from ploughing to cutting in micro machining and evaluation of the minimum thickness of cut
Cuba Ramos, A.; Autenrieth, H.; Strauß, T.; Deuchert, M.; Hoffmeister, J.; Schulze, V.
2011. Journal of Materials Processing Technology, 212 (3), 594–600. doi:10.1016/j.jmatprotec.2011.07.007
Investigations on the Cyclic Crack Growth Behaviour of Spring Steel Wire Reinforced EN AW-6082
Merzkirch, M.; Weidenmann, K. A.; Schulze, V.
2011. EPD Congress 2011. Ed.: S. N. Monteiro, 135–142, John Wiley and Sons. doi:10.1002/9781118495285.ch17
Prognose des Driftverhaltens getakteter Montagelinien
Gans, J.-E.; Lanza, G.; Müller, R.; Peters, S.; Schoen, L.
2011. wt Werkstattstechnik online, 101 (3), 162–166
Supply Chain Risk Management
Ender, M.; Lanza, G.; Nissen, J.
2011. Risk, compliance & audit, (5), 28–31
Systematisch zum wandlungsfähigen globalen Wertschöpfungsnetzwerk
Lanza, G.; Moser, R.; Ruhrmann, S.; Peter, K.
2011. wt Werkstattstechnik online, 101 (4), 206–209
Global Procurement Guide - Ein Leitfaden für globale Beschaffungsaktivitäten in kleinen und mittelständischen Unternehmen
Lanza, G.; Ruhrmann, S.; Jondral, A.; Bensing, J.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, (5), 291–294
Planung und Optimierung wandlungsfähiger globaler Wertschöpfungsnetzwerke
Lanza, G.; Moser, R.; Scholz-Reiter, B.; Özsahin, M.-E.; Schuhkraft, S.; Meil, P.; Rasp, F.
2011. Industrie-Management, (3), 57–60
Effizienzsteigerung von Produktionssystemen
Lanza, G.; Peters, S.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (6), 418–422
Hybrides Planungswerkzeug zur adaptiven Auslegung von Lean-Methoden
Spath, D.; Korge, A.; Krause, T.; Lanza, G.; Jondral, A.; Moser, R.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 106 (6), 413–417
Auswirkungen neuer Mobilitätsformen auf die Produktion
Lanza, G.; Peters, S.; Stockey, S.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (5), 357–360
Erfolgsfaktoren beim Einsatz von Lean-Methoden
Lanza, G.; Jondral, A.; Moser, R.; Kübler, L.
2011. Productivity Management, 16 (3), 36–39
Supply chain design for the global expansion of manufacturing capacity in emerging markets
Weiler, S.; Páez, D.; Chun, J.-H.; Graves, S.; Lanza, G.
2011. CIRP journal of manufacturing science and technology, 4 (3), 265 – 280. doi:10.1016/j.cirpj.2011.06.012
Research into production technology
Lanza, G.; Ruhrmann, S.
2011. Public service review: European science & technology, (11), 92–93
Qualitätsprobleme im Ursprung beheben
Lanza, G.; Ender, T.; Book, J.; Jondral, A.
2011. Beschaffung aktuell, (11), 20–22
Beherrschung der Qualitätssicherung im Wertschöpfungsnetzwerk
Lanza, G.; Book, J.; Enz, T.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 106 (12), 928–933. doi:10.3139/104.110658
Nachhaltige und umfassende Lieferantenentwicklung in China - Teil 2 - Schluss mit hohen Beständen
Lanza, G.; Ender, T.; Book, J.; Jondral, A.
2011. Beschaffung aktuell, 2011 (12), 22–23
Mit Methode investiert -Life Cycle Performance
Lanza, G.; Behmann, B.; Appel, D.
2011. VDMA-Nachrichten, 90 (12), 16–17
Erfolgsfaktor Servicedaten
Lanza, G.; Stengele, G.; Appel, D.; Behmann, B.
2011. VDMA-Nachrichten, 90 (12), 18–19
Schnittstellenbaukasten für die aufwandsarme Montage und Justage von Modulen
Abele, E.; Korff, D.; Munzinger, C.; Hennrich, H.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb (ZWF), 2011 (4), 255–260
The development of two-component micro powder injection moulding and sinter joining
Ruh, A.; Klimscha, K.; Piotter, V.; Plewa, K.; Ritzhau, H.-J.; Fleischer, J.
2011. Microsystem technologies, 17 (10-11), 1547–1556. doi:10.1007/s00542-011-1326-7
Bauteilflexibles Zuführsystem - Piezoelektrisches modulares Schwingfördersystem für eine flexible Teilezuführung in der automatisierten Montage
Fleischer, J.; Leberle, U.
2011. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 2011 (7-8), 548–522
Automatisierte Kleinserienmontage von Rahmenstrukturen
Fleischer, J.; Lanza, G.; Elser, J.; Otter, M.
2011. VDI-Z integrierte Produktion, 153 (9), 99–101
Advanced manufacturing and design techniques for lightweight structures
Both, J.; Brüggemann, T.; Dosch, S.; Elser, J.; Kronthaler, M.; Morasch, A.; Otter, M.; Pietzka, D.; Selvaggio, A.; Weddeling, C.; Wehrle, E.; Wirth, F.; Baier, H.; Biermann, D.; Brosius, A.; Fleischer, J.; Lanza, G.; Schulze, V.; Tekkaya, A.; Zabel, A.; Zäh, M.
2011. International aluminium journal, 87 (9), 60–63
Breite Abdeckung von FVK-Verbindungen mit wenigen Verfahren
Fleischer, J.; Elser, J.; Schädel, J.; Ochs, A.
2011. Maschinenmarkt, 10, 26–29
Erfolgsfaktor Leichtbau: Systemeffiziente hybride Lösungen sind gefragt!
Fleischer, J.; Ochs, A.; Dosch, S.
2011. ZfAW, 14 (4), 28–33
Specific machining forces and resultant force vectors for machining of reinforced plastics
Schulze, V.; Becke, C.; Pabst, R.
2011. CIRP Annals - Manufacturing Technology, 60 (1), 69–72. doi:10.1016/j.cirp.2011.03.085
Abtragregelung der Mikroerosion maximiert die Genauigkeit
Schulze, V.; Ruhs, C.
2011. Maschinenmarkt, 117 (36), 116–119
Vergleich von Verfahren zur Geometriebestimmung in der Mikrotechnik
Krah, T.; Horn, F.; Patzelt, S.; Schrader, C.; Schulze, M.; Shaw, L.; Tausendfreund, A.; Viering, B.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 234–249, Shaker Verlag
Bestimmung der Messunsicherheit in Mikrometer Bereich - Strategien, Modelle und Einflussfaktoren
Tan, Ö.; Krah, T.; Neuschaefer-Rube, U.; Ehrig, W.; Viering, B.; Herffurth, T.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 188–205, Shaker Verlag
Integration von Funktionsprüfung und dimensioneller Messtechnik zu einer optimierten Qualitätssicherungsstrategie für Mikroverzahnungen
Albers, A.; Lanza, G.; Becke, C.; Viering, B.; Sadowski, E.
2011. Neue Strategien der Mess- und Prüftechnik für die Produktion von Mikrosystemen und Nanostrukturen: Abschlussbericht DFG-Schwerpunktprogramm 1159 StraMNano. Hrsg.: A. Weckenmann, 5–18, Shaker Verlag
Experimentelle Messunsicherheitsbestimmung bei Mikroverzahnungsmessungen
Lanza, G.; Viering, B.; Härtig, F.
2011. Messunsicherheit praxisgerecht bestimmen, Erfurt, 8.-9. November 2011, 29–38, VDI Verlag
Flexible und intelligente Greiftechnik
Lanza, G.; Fleischer, J.; Munzinger, C.; Elser, J.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 339–362, VDI Verlag
Genauigkeitssteigerung der Profilherstellung durch fliegendes Abtrennen während des Rundens beim Strangpressen
Schneider, M.; Köhler, G.; Fleischer, J.; Munzinger, C.; Schulze, V.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 73–100, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2011. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase II. Hrsg.: A. E. Tekkaya, 363–386, VDI Verlag
Adaptronische hydrostatische Drucktascheneinheit auf Basis neuer Aktoren für aktive Führungssysteme
Munzinger, C.; Weis, M.; Herder, S.
2011. Adaptronik für Werkzeugmaschinen: Forschung in Deutschland. Hrsg.: J. Hesselbach, 446–462, Shaker Verlag
Trennen von metallischen Leichtbauwerkstoffen
Schulze, V.; Michna, J.
2011. Handbuch Leichtbau: Methoden, Werkstoffe, Fertigung. Hrsg.: F. Henning, 531–553, Carl Hanser Verlag
Validierung von Mikrokomponenten und -systemen durch Simulationen und Prüfstandsversuche
Albers, A.; Lanza, G.; Turki, T.; Hoppen, P.; Troll, D.; Kippenbrock, K.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 97–104, KIT Scientific Publishing
2-Komponenten-Spritzguss und Sinterfügen - Potentiale in der Mikroproduktion
Fleischer, J.; Klimscha, K.; Ruh, A.; Piotter, V.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 83–90, KIT Scientific Publishing
Fertigungstechnologien zur Erzeugung hochgenauer Mikrostrukturen und Oberflächen
Schulze, V.; Deuchert, M.; Ruhs, C.; Weber, P.; Weingärtner, R.
2011. Kolloquium Mikroproduktion und Abschlusskolloquium SFB 499, 11. - 12. Oktober 2011, Karlsruhe. Hrsg.: O. Kraft, 65–74, KIT Scientific Publishing
Machining Strategies for Hole Making in Composites with Minimal Workpiece Damage by Directing the Process Forces Inwards
Schulze, V.; Becke, C.; Weidenmann, K.; Dietrich, S.
2011. Journal of Materials Processing Technology, 211 (3), 329–338. doi:10.1016/j.jmatprotec.2010.10.004
Process analysis for the production of Beryllium alloys
Ruprecht, E.
2010. BeYOND Industrial Forum II, 1. Oktober 2010, 1–12
Research on the Design of Sinter Joined Connections for Powder Injection Moulded Components
Munzinger, C.; Dieckmann, A.-M.; Klimscha, K.
2010. Proceedings / World Powder Metallurgy Congress & Exhibition, PM2010 : 10th - 14th October 2010, Fortezza da Basso Congress Centre, Florence, Italy. Organised & sponsored by EPMA, 477–484, European Powder Metallurgy Association (EPMA)
Product Lifecycle Management – Geometric Variations
Giordano, M.; Mathieu, L.; Villeneuve, F. (Eds.)
2010. John Wiley and Sons. doi:10.1002/9781118557921
Impact of Workpiece Shape Deviations in Coordinate Metrology
Lanza, G.; Peters, J.
2010. Product Lifecycle Management : Geometric Variations. Ed.: M. Giordano, 405–418, John Wiley and Sons. doi:10.1002/9781118557921.ch23
Prozessanalyse in der Produktion von Berylliumlegierungen
Ruprecht, E.
2010. BeYOND Industrial Forum II, 1. Oktober 2010, 1–12
Extended measuring range for adaptronic control of quasi-/static forces and travels with piezoelectric transducers
Munzinger, C.; Weis, M.; Herder, S.
2010. ICMC 2010, 913–920, Deutsche Forschungsgemeinschaft (DFG)
Lösungen statt Standardgeschäft - Zur Strategie des Weltmarktführers für Produktionslösungen
Fleischer, J.
2010. welt.de (Ed.), Tagungsband Zukunft Maschinen- & Anlagenbau Hrsg.: welt.de
Fallbeispiele zur Ressourceneffizienz von Werkzeugmaschinen
Fleischer, J.
2010. V. W. Scripten (Ed.), Tangungsband Internationales Kolloquium des Spitzentechnologieclusters eniPROD Hrsg.: Scripten, Verlag Wissenschaftliche. Chemnitz, 24.06.-25.06.2010
Method to couple several miniature oscillating conveyors to a feeding system
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Leberle, U.
2010. Euspen (Ed.), EUSPEN 10th International Conference of the European Society for Precision Engineering & Nanotechnology Hrsg.: Euspen, 103–106
Research on the machining of green feedstock material for sinter joining
Munzinger, C.; Dieckmann, A.-M.; Deuchert, M.; Klimscha, K.; Leberle, U.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, 31st May - 4th June 2010, Delft, Netherlands, 99–102, European Society for Precision Engineering and Nanotechnology (euspen)
Characterisation of a piezoelectric vibratory Conveyor
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Leberle, U.
2010. ACTUATOR 10 International Conference and Exhibition on New Actuators and Drive Systems. WFB Wirtschaftsförderung Bremen, Division Messe Bremen, Bremen und 2010, 613–616
Sensor/Actuator Integration on the Basis of Resonant Effects of Piezoelectric Transducers
Munzinger, C.; Weis, M.; Herder, S.
2010. ACTUATOR 2010, 609–612, Messe Bremen
On-machine measurement for the micro-EDM-milling process using a confocal white-light sensor
Schulze, V.; Ruhs, C.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2010, 31st May - 4th June 2010. Ed.: H. Spaan ..., 37–40, European Society for Precision Engineering and Nanotechnology (euspen)
Werkstückeinfluss bei der Auswertung in der Koordinatenmesstechnik
Lanza, G.; Peters, J.
2010. tm - Technisches Messen, 77 (05), 276–282. doi:10.1524/teme.2010.0991
Component-specific scale for inline quality assurance of spatially curved extrusion profiles
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.
2010. Production engineering, 4 (2), 193–201. doi:10.1007/s11740-010-0209-6
Precise ablation milling with ultra short pulsed Nd:YAG lasers by optical and acoustical process control
Schulze, V.; Weber, P.
2010. W. Pfleging, Y. Lu, K. Washio, J. Amako & W. Hoving (Eds.), Proceedings of SPIE Vol. 7585 Hrsg.: Wilhelm Pfleging, Kunihiko Washio, Jun Amako, Willem Hoving, Yongfeng Lu, SPIE. doi:10.1117/12.841616
Nass- und Trockenräumen von 16MnCr5
Meier, H.; Rilli, R.; Schulze, V.
2010. R. Pabst, B. Nestler & V. Schulze (Eds.), 1. Klausurtagung des Graduiertenkollegs 1483, 3. Symposium des CCMSE Hrsg.: Pabst, Rüdiger; Nestler, Britta; Schulze, Volker, 39–43, Shaker Verlag
Efficient Simulation of Parallel Kinematic Machine Tools
Kipfmüller, M.; Munzinger, C.
2010. Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, 30 August 2009 - 2 September 2009. Bd.: 7: 33rd Mechanisms and Robotics Conference, Parts A and B, 523–530, The American Society of Mechanical Engineers (ASME). doi:10.1115/DETC2009-86769
Size Effects in Aluminium Bronze Cast Specimens
Okolo, B.; Rögner, J.; Kerscher, E.; Beck, T.; Schulze, V.; Wanner, A.; Löhe, D.
2010. Smart Systems integration and reliability: honorary volume on the occasion of Herbert Reichl’s 65th birthday, 740–750, Michel, B
Configuring the right global manufacturing network: Comparison of two practical processes
Grallert, S.; Fleet, D.; Lanza, G.; Moser, R.; Shi, Y.; Ude, J.
2010. M. Gregory, J. Srai & Y. Shi (Eds.), The 15th annual Cambridge International Manufacturing Symposium, 23rd-24th September 2010, Møller Centre, Cambridge, 1–22, University of Cambridge
Proceedings of the APMS 2010 International Conference on Advances in Production Management Systems
Garetti, M.; Taisch, M.; Cavalieri, S.; Terzi, S.; Tucci, M. (Eds.)
2010. Ciemme S.p.A
Enhancement of the serviceability in the machine and plant industry
Lanza, G.; Behmann, B.; Werner, P.
2010. International Conference on Advances in Production Management Systems (APMS 2010) : held from 11th to 13th October 2010 in Cernobbio, Lake Como, Italy, 1–8
Simulation zur Kosten-und Risikobewertung von Produktionsszenarien
Lanza, G.; Peter, K.; Peters, S.; Rühl, J.
2010. G. Zuelch & P. Stock (Eds.), Integrationsaspekte der Simulation: Technik, Organisation und Personal: Karlsruhe, 7. und 8. Oktober 2010. Hrsg.: Gert Zülch; Patricia Stock, 469–476, KIT Scientific Publishing
Process Capability Indices for the Evaluation of Micro-Manufacturing Processes
Lanza, G.; Kippenbrock, K.; Kuhn, G.
2010. R. Teti (Ed.), 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering : 23 - 25 June 2010, Capri, Italy. Hrsg.: Roberto Teti, 1–4, Università degli Studi di Napoli Federico II
Reorganisation von Produktionssystemen in kleinen und mittelständischen Unternehmen mit Hilfe simulationsbasierter Prozessmuster für Lean-Methoden
Lanza, G.; Jondral, A.; Peter, K.; Toewe, H.
2010. wt Werkstattstechnik online, 100 (3), 125–130
Life Cycle Performance in der Produktionstechnik - Ansätze zur Steigerung der Wettbewerbsfähigkeit
Lanza, G.; Munzinger, C.; Broos, A.; Behmann, B.; Hennrich, H.; Niggeschmidt, S.; Peters, S.; Rühl, J.; Schopp, M.; Werner, P.
2010. wt Werkstattstechnik online, 100 (7/8), 628–631
Proposal of a Cylindrical Standard to Evaluate the Uncertainty of Measurement for Micro Gear Measurements
Lanza, G.; Viering, B.
2010. 10th International Symposium on Measurement and Quality Control (ISMQC 2010) : Osaka, Japan, 5 - 9 September 2010 / [organized by: The Japan Society for Precision Engineering (JSPE), 254–257, Curran
Prognosis of machine tool warranty costs considering arising risks through weak data sets and unknown load profiles
Lanza, G.; Werner, P.; Behmann, B.
2010. E. Safety & R. Association (Eds.), European Safety and Reliability Annual Conference: Reliability, Risk and Safety: Back to the Future (ESREL) 2010 Hrsg.: Safety, European; Association, Reliability, 1014–1018, CRC Press-Taylor & Francis Group
Quantification of Risks Arising from Low Data Availability in Extended Warranty and Preventive Maintenance
Lanza, G.; Werner, P.
2010. Symposium proceedings - International Applied Reliability Symposium Euorpe 2010, 2–6
Use of the real options analysis to valuate new supplier development - a South Korean case study
Lanza, G.; Weiler, S.; Möhlmann, J.
2010. W. Sihn & P. Kuhlang (Eds.), Proceedings / 43rd International Conference on Manufacturing Systems, 26 - 28 May 2010, [Vienna] . Eds.: Wilfried Sihn; Peter Kuhlang, 137–144, Neuer Wissenschaftlicher Verlag (NWV)
Procurement Structures for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.; Mall, P.
2010. 20th Annual North American Research and Teaching Symposium on Purchasing and Supply Chain Management 2010, 1–11
Product design for global production
Lanza, G.; Weiler, S.
2010. A. Bernard (Ed.), Global product development : proceedings of the 20th CIRP Design Conference, Ecole Centrale de Nantes, Nantes, France, 19th - 21st April 2010. Ed.: Alain Bernard, 403–412, Springer
Messunsicherheit als bedeutende Größe in der Mikroproduktion
Lanza, G.; Viering, B.; Kippenbrock, K.; Stockey, S.
2010. wt Werkstattstechnik online, 100 (11/12), 875–879
Early evaluation of manufacturing costs within an integrative design of product and production system
Nordsiek, D.; Gausemeier, J.; Lanza, G.; Peters, S.
2010. M. Garetti, M. Taisch, S. Cavalieri, S. Terzi & M. Tucci (Eds.), Proceedings of the APMS 2010 International Conference on Advances in Production Management Systems Hrsg.: Garetti, Marco; Taisch, Marco; Cavalieri, Sergio; Terzi, Sergio; Tucci, Mario, Ciemme S.p.A
Integrating green and sustainability aspects into life cycle performance evaluation
Niggeschmidt, S.; Helu, M.; Diaz-Elsayed, N.; Behmann, B.; Lanza, G.; Dornfeld, D.
2010. H.-C. Zhang, Z. Liu & G. Liu (Eds.), Conference proceedings / LCE 2010, 17th CIRP International Conference on Life Cycle Engineering Hrsg.: Zhang, Hong-Chao; Liu, Zhifeng; Liu, Guangfu, 366–371, Hefei University of Technology Press
Produktionstechnik für zukünftige Automobile
Lanza, G.; Peters, S.
2010. Konferenzband zum 1. Technologietag der e-mobil BW 2010, 25.11.2010, Stuttgart, 1–25
Experience-based user support system for the measurement of micro-mechanical parts
Lanza, G.; Peters, J.; Kippenbrock, K.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2010, 31st May - 4th June 2010. Ed.: H. Spaan ..., 100–103, European Society for Precision Engineering and Nanotechnology (euspen)
Dünnwandige Leichtmetallteile präzise bearbeiten: Vergleich zweier Maschinenkonzepte für die Bearbeitung von Leichtmetallstrangpressprofilen
Engbert, T.; Biermann, D.; Zabel, A.; Otter, M.; Munzinger, C.; Lanza, G.
2010. technica, 59 (9), 22–24
Matching of micro gears via dimensional metrology and functional testing
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2010. 10th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2010, Delft, Netherlands, 31. May - 4. June, 2010, 51–54, European Society for Precision Engineering and Nanotechnology (euspen)
Interface elements for low-effort module adjustment inmachine tools
Hennrich, H.; Korff, D.; Munzinger, C.; Abele, E.
2010. 2nd CIRP PMI 2010, 10.06.2010-11.06.2010, Vancouver, Kanada, CIRP Process Machine Interactions Conference Proceedings
Increasing maintenance efficiency - A strategy regarding condition and load-based approaches for diagnosis and prognosis
Munzinger, C.; Schopp, M.; Hennrich, H.
2010. 2nd CIRP PMI 2010, 10.06-11.06.2010, Vancouver, Kanada, CIRP Process Machine Interactions Conference Proceedings
Optimierte Instandhaltung durch aufwandsminimale Kombination von zustands- und belastungsorientierten Diagnose- und Prognoseansätzen
Munzinger, C.; Schopp, M.; Hennrich, H.
2010. AKIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 381–390, Zillekens
Zustands- und belastungsorientierte Ansätze zur Diagnose und Prognose von Werkzeugmaschinen
Wieschollek, M.; Hennrich, H.
2010. Life-Cycle-Performance produktionstechnischer Maschinen und Anlagen. Hrsg.: J. Fleischer, 16–39, Shaker Verlag
Numerische Materialmodellierung und deren Anwendung in der virtuellen Produktion
Zanger, F.; Autenrieth, H.; Hoffmeister, J.; Schulze, V.
2010. Graduiertenkolleg 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen, Begleitband zur 1. jährlichen Klausurtagung 2010. Hrsg.: R. Pabst, 125–129, Shaker Verlag
Neue Simulationsmethode zur Randschichtcharakterisierung unter Berücksichtigung der Mehrfachspanbildung beim Räumen
Osterried, J.; Zanger, F.; Autenrieth, H.; Schulze, V.
2010. Graduiertenkolleg 1483 - Prozessketten in der Fertigung: Wechselwirkung, Modellbildung und Bewertung von Prozesszonen, Begleitband zur 1. jährlichen Klausurtagung 2010. Hrsg.: R. Pabst, 57–61, Shaker Verlag
Finite element modelling of coverage effects during shot peening of IN718
Zimmermann, M.; Schulze, V.; Hoffmeister, J.
2010. International Journal of Materials Research, 101 (8), 951–962. doi:10.3139/146.110375
A structured approach to integrate MEMS and Precision Engineering methods
Schlipf, M.; Bathurst, S.; Kippenbrock, K.; Kim, S.-G.; Lanza, G.
2010. CIRP journal of manufacturing science and technology, 3 (3), 236–247. doi:10.1016/j.cirpj.2010.12.002
Assessment of flexible quantities and product variants in production
Lanza, G.; Peter, K.; Rühl, J.; Peters, S.
2010. CIRP journal of manufacturing science and technology, 3 (4), 279–284. doi:10.1016/j.cirpj.2011.01.002
Quality Assurance of Micro-gears via 3D Surface Characterization
Lanza, G.; Viering, B.
2010. Product lifecycle management: geometric variations. Ed.: M. Giordano, 419–429, John Wiley and Sons
Robuste Prozesse in Toploadern
Munzinger, C.; Köhler, G.
2010. VR online, 61/6935 (6), 43–44
Flexible Bearbeitung gekrümmter Aluminiumprofile - Programmierung einer kombinierten Handhabungs- und Bearbeitungskinematik
Munzinger, C.; Lanza, G.; Otter, M.; Ochs, A.
2010. wt Werkstattstechnik online, 100 (1/2), 37–41
Mathematische Modellierung des Wärmeeintrags beim Fräsen
Schulze, V.; Michna, J.; Pabst, R.
2010. wt Werkstattstechnik online, 100 (1/2), 62–66
Beim Händewaschen wird Strom gespart
Munzinger, C.; Herder, S.; Weis, M.; Huse, S.
2010. Badische Neueste Nachrichten, 2010 (38)
Fundierte Beurteilung von monetären Risiken: Dynamische Bewertung von Produktionsszenarien
Lanza, G.; Peters, S.; Rühl, J.; Günther, T.
2010. VDI-Z integrierte Produktion, 152 (1-2), 67–69
Reorganisation von Produktionssystemen in kleinen und mittelständischen Unternehmen mit Hilfe simulationsbasierter Prozessmuster für Lean Methoden
Lanza, G.; Jondral, A.; Peter, K.; Toewe, H.
2010. wt Werkstattstechnik online, 100 (3), 125–130
Automatisierte Topologieoptimierung unter der Berücksichtigung verschiedener Lastpositionen
Munzinger, C.; Broos, A.; Gerbracht, T.; Tröndle, M.; Hennrich, H.
2010. Konstruktion - Zeitschrift für Produktentwicklung und Ingenieur-Werkstoffe, (3), 66–68
Design and prototyping of a ceramic micro turbine: a case study
Bauer, W.; Müller, M.; Knitter, R.; Börsting, P.; Albers, A.; Deuchert, M.; Schulze, V.
2010. Microsystem Technologies, 16 (4), 607–615. doi:10.1007/s00542-009-0974-3
Design for low-cost country sourcing: Defining the interface between product design and production
Lanza, G.; Weiler, S.; Vogt, S.
2010. CIRP journal of manufacturing science and technology, 2 (4), 261–271
Komplexe Baugruppen einfach sinterfügen
Munzinger, M.; Dieckmann, A.-M.; Klimscha, K.
2010. Mikroproduktion, (3), 42–45
Ganzheitliche Modellierung von Produktionssystemen - Ein stochastisches, ganzheitliches Modell zur Lebenszyklusberechnung
Lanza, G.; Behmann, B.; Peters, S.; Peter, K.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 478–482
Verfügbarkeitswirksame technische Dienstleistungen - Potenzialanalyse bei KMU im Maschinen- und Anlagenbau
Lanza, G.; Behmann, B.; Peters, S.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (5), 421–425. doi:10.3139/104.110312
Towards the flexible and near-net-shape production of three-dimensionally curved extrusion profiles
Munzinger, C.; Schulze, V.; Schneider, M.; Koehler, G.; Becker, D.; Selvaggio, A.; Tekkaya, A. E.; Kleiner, M.
2010. Production Engineering, 4 (6), 561–569. doi:10.1007/s11740-010-0246-1
Multidimensional evaluation of value added networks
Lanza, G.; Ude, J.
2010. CIRP annals, manufacturing technology, 59 (1), 489–492. doi:10.1016/j.cirp.2010.03.080
Schwingungsunterstütztes Greifen technischer Textilien
Munzinger, C.; Schulze, V.; Ochs, A.
2010. VDI-Z Integrierte Produktion, 152 (6), 51–53
Aufwandsreduktion der Modulmontage mittels justierbarem Schnittstellenbaukasten
Abele, E.; Korff, D.; Munzinger, C.; Hennrich, H.
2010. wt Werkstattstechnik online, 100 (7/8), 546–552
Life Cycle Performance in der Produktionstechnik
Lanza, G.; Munzinger, C.; Broos, A.; Behmann, B.; Hennrich, H.; Niggeschmidt, S.; Peters, S.; Rühl, J.; Schopp, M.; Werner, P.
2010. wt Werkstattstechnik online, 100 (7/8), 628–631
Elektro-pneumatischer Energiewandler
Munzinger, C.; Weis, M.; Herder, S.
2010. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 105 (7/8), 706–709
Limits and challenges of manufacturing micro moulds
Schulze, V.; Weber, P.; Deuchert, M.; Haupt, S.; Ruhs, C.; Kienzler, A.
2010. International Journal of Nanomanufacturing, 6 (1/2/3/4), 176–189. doi:10.1504/IJNM.2010.034782
Modelling of the heat input for face-milling processes
Pabst, R.; Fleischer, J.; Michna, J.
2010. CIRP Annals - Manufacturing Technology, 59 (1), 121–124. doi:10.1016/j.cirp.2010.03.062
Mikro-Kraftwerke groß im Kommen - Neue Wandler für Energy Harvesting
Weis, M.; Herder, S.
2010. Elektronik, (19), 28–33
Simulation of parallel kinematic machine toolswith minimal effort
Munzinger, C.; Krauße, M.; Kipfmüller, M.
2010. Production Engineering, 4 (5), 491–499. doi:10.1007/s11740-010-0259-9
Heilsame Trennung
Schlipf, M.; Lanza, G.; Dietrich, E.; Schulze, A.
2010. Qualität und Zuverlässigkeit, 55 (10), 68–71
Energy Harvesting für Sanitärarmaturen
Munzinger, C.; Herder, S.; Weis, M.
2010. Technik in Bayern, (6), 10–11
Miniturbine mit Klauenpolgenerator für die Versorgung von fluidischen Energy-Harvesting-Systemen
Munzinger, C.; Weis, M.; Herder, S.
2010. Galvanotechnik, 101 (12), 2898–2904
Heuristische Geschäftsprozessoptimierung in der Fahrzeugentwicklung
Schlichtenmayer, K.-H.; Maier, H.; Lanza, G.; Peters, S.; Krämer, L.
2010. Konstruktion, 6 (11/12), 67–68
Detection of shape deviations and measurement errors by a point cloud analysis
Lanza, G.; Schulze, V.; Stockey, S.; Chlipala, M.; Peters, J.
2010. Production engineering, 4 (6), 599–605. doi:10.1007/s11740-010-0268-8
Positionierung und Synchronisation von kooperierenden Robotern
Herrmann, C.; Hennes, M.; Juretzko, M.; Schneider, M.; Munzinger, C.
2010. Vernetzt und ausgeglichen : Festschrift zur Verabschiedung von Prof. Dr.-Ing. habil. Dr.-Ing. e.h. Günter Schmitt. Hrsg.: K. Zippelt, 129–134, KIT Scientific Publishing
Strategien zur wirtschaftlichen Gestaltung der globalen Beschaffung. PhD dissertation
Weiler, S.
2010. Shaker Verlag
Simulation zur Kosten- und Risikobewertung von Produktionsszenarien
Lanza, G.; Peter, K.; Peters, S.; Rühl, J.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 469–476, KIT Scientific Publishing
Modellierung und Simulation von Wertschöpfungsnetzwerken unter Berücksichtigung realer Entscheidungsstrukturen durch die Verwendung von Software-Agenten
Lanza, G.; Book, J.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 389–396, KIT Scientific Publishing
Anwenderfreundliche und komplexitätsreduzierte Bewertung und Robustheitsuntersuchung von Lean-Methoden bei kleinen und mittleren Unternehmen
Lanza, G.; Peter, K.; Jondral, A.
2010. Integrationsaspekte der Simulation: Technik, Orgnisation und Personal, Karlsruhe, 7. und 8. Oktober 2010 = Integration Aspects of Simulation: Equipment, Organization and Personnell, Karlsruhe, 7th and 8th October 2010. Hrsg.: G. Zülch, 189–196, KIT Scientific Publishing
Aufwandsoptimierte Simulation von Werkzeugmaschinen. PhD dissertation
Kipfmüller, M.
2010. Shaker Verlag. doi:10.5445/IR/1000014668
Projektvorstellung und Einleitung
Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 1–8, Apprimus Wissenschaftsverlag
Analyse des Ausfallverhaltens von Werkzeugmaschinen
Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 9–16, Apprimus Wissenschaftsverlag
Ermittlung der Komponentenbelastung für die Lebensdauerprognose
Broos, A.; Munzinger, C.; Walther, M.; Laptev, I.; Verl, A.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 17–36, Apprimus-Verl
Zustandsüberwachung von Komponenten der Lineartechnik
Rossteuscher, H.; Schopp, M.; Munzinger, C.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 69–84, Apprimus-Verl
Ausfallkosten und Entwicklung neuer Dienstleistungen
Schopp, M.; Munzinger, C.; Wieschollek, M.; Forkert, T.
2009. Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST). Hrsg.: C. Munzinger, 135–154, Apprimus-Verl
Extension of cutting force formulae for microcutting
Fleischer, J.; Schulze, V.; Kotschenreuther, J.
2009. CIRP Journal of Manufacturing Science and Technology, 2 (1), 75–80
Compensation of the size effect due to the cutter radius offset in the micro milling process
Schulze, V.; Deuchert, M.; Ruhs, C.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 437–440, Cardiff University. doi:10.1243/17547164C0012009093
Möglichkeiten der Schneidkantenpräparation bei Wälzschälrädern
Osterried, J.
2009. Verlag Dr. Müller (VDM)
Control of feeding micro parts with vibrating conveyors
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 275–278, Cardiff University. doi:10.1243/17547164C0012009055
Automated sinter-joining of PIM parts
Munzinger, C.; Ruprecht, E.; Klimscha, K.; Dieckmann, A.-M.
2009. Advances in powder metallurgy & particulate materials - 2009 : proceedings of the 2009 International Conference on Powder Metallurgy & Particulate Materials ... ; June 28 - July 1, Las Vegas, NV ; [PowderMet 2009]. Vol.: 2: Parts 8 - 13. Ed.: T. J. Jesberger, 6/1, Metal Powder Industries Federation
Implementation of on-machine measurements using confocal white-light sensors for micro Electrical Discharge Machining and micro laser ablation
Schulze, V.; Weber, P.; Ruhs, C.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: V. Saile, 179–182, Cardiff University
Identifying functional principles of an automated handling of greentapes for an in-mold label injection molding process
Munzinger, C.; Dieckmann, A.-M.; Ruprecht, E.
2009. World Congress on Powder Metallurgy & Particulate Materials : PowderMet 2009, June 28-July 1st, Las Vegas, 4–103
In-mold-labeling of metal/ceramic material compounds
Ruprecht, E.
2009. Workshop CarCIM, Fraunhofer Institut für Keramische Technologien und Systeme (IKTS)
OPTILAST - basierte Dienstleistungen für den lebenszyklusoptimierten Betrieb einer Werkzeugmaschine
Forkert, T.; Beth, M.; Wieschollek, M.; Schopp, M.
2009. Verfügbarkeit von Produktionssystemen : Maschinen, Komponenten und Verfügbarkeitsmanagement ; Gemeinsame Abschlussveranstaltung der BMBF-Verbundprojekte zum Themenkreis ; Tagungsband ; 24. - 25. Juni 2009, Fraunhofer Institut f. Werkzeugmaschinen u. Umformtechnik, IWU. Ed.: R. Neugebauer, 203–212
Zustandsüberwachung von Komponenten der Lineartechnik
Roßteuscher, H.; Munzinger, C.; Schopp, M.
2009. Verfügbarkeit von Produktionssystemen : Maschinen, Komponenten und Verfügbarkeitsmanagement ; Gemeinsame Abschlussveranstaltung der BMBF-Verbundprojekte zum Themenkreis ; Tagungsband ; 24. - 25. Juni 2009, Fraunhofer Institut f. Werkzeugmaschinen u. Umformtechnik, IWU. Ed.: R. Neugebauer, 69–84
Steigerung der Verfügbarkeit durch Überlastbegrenzung und prozessparallele Last- und Verschleißüberwachung (OPTILAST) : 08/2006 - 07/2009 ; Abschlußbericht
Bayha, T.; Munzinger, C.; Schopp, M.; Broos, A.; Huf, A.; Walther, M. (Eds.)
2009. Apprimus Wissenschaftsverlag
Development and Prototyping of a Microturbine-Generator-Unit for Energy Supply of Distributed Fluidic Microsystems
Munzinger, C.; Tröndle, M.; Herder, S.; Weis, M.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Vol.: 2. Ed.: H. V. Brussel, 550–554, European Society for Precision Engineering and Nanotechnology (euspen)
Dimensioning a Sinter-Joined Shaft to Collar Connection in Sub-Millimeter Range
Munzinger, C.; Tröndle, M.; Klimscha, K.; Dieckmann, A.-M.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Vol. 1. Ed.: H. V. Brussel, 483–486, European Society for Precision Engineering and Nanotechnology (euspen)
Assembly Automation for Micro-Products Coupling a Vibration Conveyor with A Gripper
Munzinger, C.; Dieckmann, A.-M.; Tröndle, M.; Ruprecht, E.
2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009. Vol.: 2. Ed.: H. Van Brussel, 529–532
Neue Ansätze zur Weichbearbeitung von Innenverzahnungen - Wälzschälen und Trockenräumen
Schulze, V.; Kühlewein, C.; Rilli, R.
2009. P. D.-I. K. Felten (Ed.), 2. Symposium Praxis der Zahnradfertigung, Esslingen, 22.06. – 24.06.2009. Hrsg.: K. Felten, 99–120
Adaptronic hydrostatic guiding system for intelligent level control of machine tool slides
Munzinger, C.; Weis, M.; Herder, S.
2009. Conference proceedings / Adaptronic Congress, 20 - 21 May 2008 in Berlin, 72881, Adaptronic Congress Veranstaltungs GbR
Einsatz einer intelligenten Strebe zur Kompensation geometrischer Maschinenfehler in einer Werkzeugmaschine
Munzinger, C.; Herder, S.; Weis, M.; Broos, A.
2009. Mechatronik-Konferenz, 367–377, VDI Verlag
Modeling Of The Heat Input For The Face-Milling Of EN-GJL-250
Schulze, V.; Michna, J.; Pabst, R.
2009. 12th CIRP Conference on Modelling of Machining Operations Hrsg.: Editoriala, MU Mondragon Unibertsitateko Zerbitzu, 243–248
Optimizing Life Cycle Performance of Machine Components Using Time-Discrete Condition Monitoring and Prognosis
Munzinger, C.; Schopp, M.; Broos, A.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE 2009), Cairo, Egypt, 3 - 6 May 2009, 418–424
Intelligent strut to compensate geometrical machine errors in amachine tool
Munzinger, C.; Herder, S.; Weis, M.; Otter, M.
2009. Conference proceedings - Adaptronic Congress, 19 - 20 May 2009 in Berlin, 122–130, ERAS
Smart adaptronic hydrostatic guiding system for machine tool slides
Munzinger, C.; Herder, S.; Weis, M.
2009. M. Ahmadian (Ed.), Smart Structures/NDE 2009 Proceedings of SPIE - The International Society for Optical Engineerin Hrsg.: Ahmadian, Mehdi, 77–87. doi:10.1117/12.817541
Innovative Lösungen für die zerspanende Bearbeitung im Bereich Powertrain
Fleischer, J.; Kotschenreuther, J.
2009. Begleitband zum Fachgespräch Innovative Zerspanung : Prozess, Simulation, Optimierung ; Dortmund, 10./11. März 2009, 25–32, Technische Universität Dortmund
11th CIRP International Conference on Computer Aided Tolerancing, Annecy, France, 26-27 March 2009
Giordano, M. (Ed.)
2009. Association for Computing Machinery (ACM)
Erfolgsfaktor Qualität - 20 Jahre FQS : 11. FQS-Forschungstagung 2009 ; 21. Oktober 2009, Frankfurt am Main
Deutsche Gesellschaft für Qualität, DGQ (Ed.)
2009. Forschungsgemeinschaft Qualität (FQS)
Nutzen- und Kostenprognose hybrider Produkte mittels einer Simulation der Ausfall- und Servicekosten
Lanza, G.; Behmann, B.; Niggeschmidt, S.
2009. H. Meier (Ed.), Kooperative Geschäftsmodelle zu Integration von Sach- und Dienstleistung. Hrsg.: Horst Meier, 52–72, VDMA Verlag
Impact of workpiece shape deviations on the evaluation process in coordinate metrology
Lanza, G.; Peters, J.
2009. Proceedings of 11th CIRP International Conference on Computer Aided Tolerancing. Ed.: M. Giordano, 1–6, International Academy for Production Engineering (CIRP)
Stochastic methods for flexiblity evaluations of production systems
Lanza, G.; Rühl, J.; Werner, P.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE) 2009, 4.-6. May, Cairo, Egypt, 401–406
Hybrides Planungswerkzeug zur adaptiven Planung innovativer Konzepte für das Zusammenwirken von Mensch und Computer im Planungsprozess
Lanza, G.; Peter, K.; Jondral, A.; Spath, D.; Korge, A.; Krause, T.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (7-8), 582–587. doi:10.3139/104.110045
Simulation-based quantification of interdependencies between lean methods and production figures
Lanza, G.; Peter, K.
2009. 16th CIRP International Conference on Life Cycle Engineering (LCE) 2009, 4.-6. May, Cairo, Egypt, 2–9
Behavior of dynamic preventive maintenance optimization for machine tools
Lanza, G.; Niggeschmidt, S.; Werner, P.
2009. Annual Reliability and Maintainability Symposium (RAMS), 26th-29th Janary 2009, Fort Worth, Texas. Hrsg.: IEEE, 315–320, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2009.4914695
Life-Cycle Performance als Grundlage für technische Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. Informationen für die Wirtschaft : Zeitschrift der Industrie- und Handelskammer Nordschwarzwald, 2009 (1-2), 40–41
Ausfallorientierte Bewertung technischer Dienstleistungen - Entwicklung eines Demonstratortools zur Leistungskalkulation und zum Controlling
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. wt Werkstattstechnik online, 99 (7/8), 533–538
Reliability Based Spare Parts Provision for the Machine Building Industry via Adapted Service Life Prediction
Lanza, G.; Niggeschmidt, S.
2009. A. Tucson (Ed.), Symposium proceedings - International Applied Reliability Symposium 2009, 25th - 27th Marc, Barcelona, T2–S4, ReliaSoft Corporation
Ausfallgerechte Ersatzteilbereitstellung im Maschinen- und Anlagenbau mittels adaptiver Lebensdauerprognose
Lanza, G.; Niggeschmidt, S.
2009. V. W. GmbH (Ed.), Technische Zuverlässigkeit 2009 : Entwicklung und Betrieb zuverlässiger Produkte ; Leonberg, 29. und 30. April 2009, 111–122, VDI Fachmedien
Flexible und intelligente Greiftechnik
Lanza, G.; Munzinger, C.; Fleischer, J.; Ruch, D.; Elser, J.
2009. A. E. Tekkaya (Ed.), Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen : Zwischenbericht Phase 2, 1. Januar 2007 - 31. Dezember 2008. Hrsg.: A. Erman Tekkaya, 275–294, VDI Verlag
Prozesskette zur flexiblen Herstellung leichter Tragwerkstrukturen: Steigerung der Qualität und Zuverlässigkeit
Munzinger, C.; Lanza, G.; Elser, J.; Ruch, D.; Schneider, M.; Koehler, G.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 442–449
Gestaltung verteilter Entwicklungsnetzwerke: Ein Konfigurationsansatz mit Hilfe von Business Capabilities
Lanza, G.; Ude, J.; Deuringer, A.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (7-8), 560–565
Integrated evaluation of value added networks‐a concept incorporating dynamics, uncertainty and multi-dimensional target systems
Lanza, G.; Ude, J.
2009. 42nd CIRP Conference on Manufacturing Systems, 3rd -5th June 2009, Grenoble, France
Life Cycle Performance als wesentliches Qualitätsmerkmal von Investitionsgütern
Lanza, G.; Werner, P.; Niggeschmidt, S.
2009. Erfolgsfaktor Qualität - 20 Jahre FQS: 11. FQS-Forschungstagung 2009; 21. Oktober 2009, Frankfurt am Main, 134–144, FQS Forschungsgemeinschaft
Quality Assurance of Micro Gears via Three-Dimensional Surface Characterization
Lanza, G.; Viering, B.
2009. M. Giordano (Ed.), 11th CIRP International Conference on Computer Aided Tolerancing, March 26th - 27th 2009, Annecy. Ed.: Max Giordano, 1–5
Adapted reliability prediction by integrating mechanical load impacts
Lanza, G.; Werner, P.; Niggeschmidt, S.
2009. Annual Reliability and Maintainability Symposium (RAMS) 2009, 83–88, Institute of Electrical and Electronics Engineers (IEEE). doi:10.1109/RAMS.2009.4914655
Statistical Method for the Estimation of Operational Conditions in Mixed Failure Data of Production Equipment
Lanza, G.; Werner, P.
2009. Symposium proceedings - International Applied Reliability Symposium 2009, 25th - 27th March 2009, 2–11
Design for low-cost country sourcing: motivation, basic principles and design guidelines
Lanza, G.; Weiler, S.; Vogt, S.
2009. R. Roy & E. Shehab (Eds.), 19th CIRP Design Conference - Competitive Design 2009 Hrsg.: Roy, Rajkumar; Shehab, Essam, 229–236, Cranfield Univ. Press
Valuation of the development of low-cost country suppliers
Lanza, G.; Weiler, S.; Stoehr, A.
2009. Sustainable development of manufacturing systems : 42nd CIRP Conference on Manufacturing Systems, 3rd - 5th June 2009 Grenoble, 3–5
Selection of Procurement Objects for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.
2009. 18th IPSERA Conference 2009, 5th - 8th April 2009 Wiesbaden, 1229–1245
Performance evaluation of production systems in the early stage of the product development
Lanza, G.; Rühl, J.
2009. 3rd International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV) 2009, Munich, Germany, October 5th-7th, 2009 Hrsg.: M. F. Zaeh, 961–972, utzverlag
Evaluation of probing errors based on a point cloud analysis in coordinate metrology
Lanza, G.; Peters, J.
2009. Proceedings of the 9th international conference of the European Society for Precision Engineering and Nanotechnology : June 2nd - June 5th 2009, San Sebastian, Spain. Ed.: H. Van Brussel, 203–206, European Society for Precision Engineering and Nanotechnology (euspen)
Mikroprozesskettengerechte Qualitätssicherung: Statistische Prozessregelung und Qualitätssicherung mikromechanischer Bauteile
Lanza, G.; Schlipf, M.; Kippenbrock, K.
2009. 4. Kolloquium Mikroproduktion : Fachbeiträge der vier SFB der Mikrotechnik ; Bremen, 28.-29. Oktober 2009 / SFB 747; SFB 516; SFB 499 Mikrourformen; SFB 440. Hrsg.: F. Vollertsen, 133–142, Verlag BIAS
Innovative quality assurance strategies for the characterization of dimensional features of micromechanical components
Lanza, G.; Schlipf, M.; Kippenbrock, K.
2009. 4M/ICOMM 2009 : the Global Conference on Micro Manufacture ; incorporating the 5th International Conference on Multi-Material Micro Manufacture (4M) and the 4th International Conference on Micro Manufacturing (ICOMM) ; 23rd - 25th September 2009, Forschungszentrum Karlsruhe, Karlsruhe, Germany ; [proceedings]. Ed.: Volker Saile, 187–190, Cardiff University. doi:10.1243/17547164C0012009034
Process chain for the flexible production of curved extrusion profiles
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.; Gerbracht, T.; Koehler, G.; Ochs, A.; Schneider, M.
2009. 2nd International Researchers Symposium on Innovative Production Machines and Systems 2009. Ed.: R. Neugebauer, 1–6
FleGSens - secure area monitoring using wireless sensor networks
Haas, C.; Krüger, D.; Pfisterer, D.; Fischer, S.; Dudek, D.; Kuntz, A.; Zitterbart, M.; Rothenpieler, P.
2009. Safety and security systems in Europe : proceedings of 4th international conference ; Potsdam, Germany, 4 - 5 June 2009. Ed.: M. Künzel, Fraunhofer IZM
Interrelationship of Micro Dimensional Metrology and Micro Functional Testing for the Quality Assurance of Micro Gears
Lanza, G.; Albers, A.; Viering, B.; Becke, C.
2009. Proceedings of the 9th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2009, San Sebastian, Spain, 2. - 5. June, 2009. Ed.: Euspen, 187–190, European Society for Precision Engineering and Nanotechnology (euspen)
Development and implementation of smart maintenance activitiesfor machine tools
Munzinger, C.; Fleischer, J.; Broos, A.; Hennrich, H.; Wieser, J.; Ochs, A.; Schopp, M.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (4), 237–246
Nutzen- und Kostenprognose hybrider Produkte mittels einer Simulation der Ausfall- und Servicekosten
Lanza, G.; Behmann, B.; Niggeschmidt, S.
2009. Kooperative Geschäftsmodelle zur Integration von Sach- und Dienstleistung. Hrsg.: H. Meier, 52–72, VDMA Verlag
Fliegendes Abtrennen
Munzinger, C.; Fleischer, J.; Köhler, G.; Schneider, M.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 65–84, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Munzinger, C.; Schmidt-Ewig, J.-P.; Ochs, A.; Gerbracht, T.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 295–316, VDI Verlag
Flexible und intelligente Greiftechnik
Lanza, G.; Munzinger, C.; Fleischer, J.; Ruch, D.; Elser, J.
2009. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Zwischenbericht Phase 2. Hrsg.: A. E. Tekkaya, 275–294, VDI Verlag
On the relationship between microcasting process, material states and mechanical properties in the gold alloy Stabilor
Kasanická, B.; Okolo, B.; Baumeister, G.; Auhorn, M.; Beck, T.; Wanner, A.; Haußelt, J.; Löhe, D.; Schulze, V.
2009. Materials science and engineering / A, 501 (1/2), 70–80. doi:10.1016/j.msea.2008.09.070
Life-Cycle-Performance als Grundlage für technische Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. Informationen für die Wirtschaft - Zeitschrift der Industrie- und Handelskammer Nordschwarzwald, (1/2), 40–41
Lifecycle-oriented component selection for machine tools based on multibody simulation and component life prediction
Fleischer, J.; Broos, A.; Schopp, M.; Wieser, J.; Hennrich, H.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (3), 179–184
Simulation des Wärmeeintrags verbessert Toleranztreue bei der Trockenbearbeitung
Schulze, V.; Michna, J.; Pabst, R.; Hauer, T.
2009. Maschinenmarkt, (13), 26–28
Thermische Belastung beim Stirnplanfräsen
Schulze, V.; Michna, J.; Pabst, R.; Hauer, T.
2009. wt Werkstattstechnik online, 99 (4), 281–286
Entwicklung einer Methode zur Ableitung von Flexibilitätsklassen in der Produktion
Nachtwey, A.; Schwarz, S.; Riedel, R.; Schopp, M.
2009. ZWF - Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (4), 224–228
Geometrieoptimierung von Mikrofräsern
Schulze, V.; Ruhs, C.; Kühlewein, C.; Deuchert, M.
2009. Mikroproduktion, (2), 40–44
Hybrid machining of microstructures using a combination of electrical discharge machining milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2009. Journal of Vacuum Science & Technology B: Microelectronics and Nanometer Structures, 27 (3), 1327–1329
Analyse und Bewertung der Kosten von Produktionsausfällen - Am Beispiel einer Fallstudie
Munzinger, C.; Schopp, M.; Beth, M.; Konrad, T.; Forkert, T.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (5), 371–378
Position and contour detection of spatially curved profiles on the basis of a component-specific scale
Fleischer, J.; Munzinger, C.; Lanza, G.; Ruch, D.
2009. CIRP annals, manufacturing technology, 58 (1), 481–484. doi:10.1016/j.cirp.2009.03.040
Optimization of preventive maintenance and spare part provision for machine tools based on variable operational conditions
Lanza, G.; Niggeschmidt, S.; Werner, P.
2009. CIRP annals, manufacturing technology, 58 (1), 429–432. doi:10.1016/j.cirp.2009.03.030
Configuration of dynamic value added networks
Lanza, G.; Ude, J.
2009. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 (5), 561–570. doi:10.1243/09544054JEM1368
Lernregelkreise zur Unterstützung der Qualitätsregelung in der manuellen Montage
Schick, M.; Haueis, M.; Schneider, F.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 463–467
Prozesskette zur flexiblen Herstellung leichter Tragwerkstrukturen
Munzinger, C.; Lanza, G.; Elser, J.; Ruch, D.; Schneider, M.; Köhler, G.; Gerbracht, T.; Ochs, A.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 442–449
Taumelfräsen zur schädigungsarmen Bohrbearbeitung von Kompositwerkstoffen
Schulze, V.; Becke, C.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (6), 473–477
Hybrid machining of microstructures using a combination of electrical discharge machining milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2009. Virtual Journal of Ultrafast Science, 8 (6), 1327–1329
Flexible Herstellung gekrümmter Strangpressprofile
Munzinger, C.; Lanza, G.; Ruch, D.; Elser, J.; Gerbracht, T.; Köhler, G.; Ochs, A.; Schneider, M.
2009. wt Werkstattstechnik online, 99 (6), 445–452
Gestaltung verteilter Entwicklungsnetzwerke
Lanza, G.; Ude, J.; Deuringer, A.-C.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 560–565
Ausfallorientierte Bewertung technischer Dienstleistungen
Lanza, G.; Niggeschmidt, S.; Behmann, B.
2009. wt Werkstattstechnik online, 99 (7/8), 533–538
Development and implementation of smart maintenance activities for machine tools
Munzinger, C.; Fleischer, J.; Broos, A.; Hennrich, H.; Wieser, J.; Ochs, A.; Schopp, M.
2009. CIRP Journal of Manufacturing Science and Technology, 1 (4), 237–246
Hybrides Planungswerkzeug zur adaptiven Planung
Lanza, G.; Peter, K.; Jondral, A.; Spath, D.; Korge, A.; Krause, T.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 582–587
Simulation of service costs throughout the life cycle of production facilities
Lanza, G.; Rühl, J.
2009. CIRP journal of manufacturing science and technology, 1 (4), 247–253. doi:10.1016/j.cirpj.2009.06.004
Simulationsgestützte Entwicklung von Mikrofräswerkzeugen
Schulze, V.; Ruhs, C.; Kühlewein, C.; Deuchert, M.
2009. Maschinenmarkt, (32), 14–18
Automatisierung in der Leichtbauproduktion
Köhler, G.; Ochs, A.; Schneider, M.
2009. wt Werkstattstechnik online, 99 (9), 614–617
Simulation von Prozessketten in der Fertigung
Schulze, V.; Pabst, R.; Meier, H.
2009. Jahresmagazin Ingenieurwissenschaften, 90–95
Bewertung von Stückzahl- und Variantenflexibilität in der Produktion
Lanza, G.; Rühl, J.; Peters, S.
2009. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (11), 1039 – 1044
Modellierung und Steigerung der Güte von Qualitätsregelkreisen - Quality Control Modelling Language (QMOLA) als neues Werkzeug
Schick, M.; Mubarak, H.; Haueis, M.
2009. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 104 (12), 1151–1157
Energyharvesting für Fluidsysteme
Weis, M.; Herder, S.
2009. FLUID Markt, (12), 26–27
Instandhaltungsoptimierung für Windkraftanlagen
Lanza, G.; Werner, P.; Behmann, B.; Rühl, J.
2009. IHK Magazin, (12), 10–11
Sensorbasierte Zustandsdiagnose und -prognose von Kugelgewindetrieben. PhD dissertation
Schopp, M.
2009. Shaker Verlag
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: Klaus Weinert, 530–541, Vulkan-Verlag
Optimierung und Bewertung kinematischer Konzepte
Munzinger, C.; Broos, A.; Ochs, A.; Schmidt-Ewig, J.-P.
2008. 5th Optimization and Stochastic Days 2008 : November 20-21, 2008, Dorint Hotel, Weimar, Germany : proceedings, 1–17, Dynardo GmbH
Hybrid machine tool based on the combination of laser ablation and electrical discharge machining (EDM)
Schulze, V.; Weber, P.; Haupt, S.
2008. 2nd International Symposium on Laser-Micromachining (ISL 2008), 2. und 13. November 2008, Chemnitz
Quality assurance for micro manufacturing processes and primary-shaped micro components
Lanza, G.; Schlipf, M.; Fleischer, J.
2008. Microsystem Technologies, 14 (12), 1823–1830. doi:10.1007/s00542-008-0608-1
Dämpfend fixierte Wendeschneidplatte verbessert die Standzeit beim Fräsen
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, 64–67
Geometry Optimization of Micro Milling Tools
Fleischer, J.; Deuchert, M.; Kühlewein, C.; Ruhs, C.
2008. S. Dimov & W. Menz (Eds.), 4M 2008 : Fourth International Conference on Multi-Material Micro Manufacture ; 9th - 11th September 2008, Cardiff, UK. Ed. by Stefan Dimov and Wolfgang Menz, 275–278, Whittles
Modeling the Heat Flux as an Input Parameter to Simulate Cutting Processes
Schulze, V.; Pabst, R.; Michna, J.
2008. R. W. I. Jarred C. Heigel Schawn P. Moylan (Ed.), Proceedings of the 11th CIRP International Conference on Modeling of Machining Operations Eds.: Jarred C. Heigel, Robert W. Ivester, Schawn P. Moylan, 155–162
Simulation of Parallel Kinematics Based on Feedback Control Systems
Munzinger, C.; Kipfmüller, M.; Schmidt-Ewig, J. P.
2008. Conference Proceedings: CIRP ICME 08 - 6th CIRP International Conference on INTELLIGENT COMPUTATION IN MANUFACTURING ENGINEERING Innovative and Cognitive Production Technology and Systems. Ed.: Roberto Teti, University of Naples, Dept. of Materials and Production Engineering; CIRP, the International Academy for Production Engineering
Fertigungsbedingte Produkteigenschaften - Fepro
Fleischer, J.; Kotschenreuther, J.; Pabst, R.
2008. Fertigungsbedingte Produkteigenschaften - FePro: Förderkennzeichen 02 PU 1010 ; Status und Perspektiven ; [Voruntersuchung]. Hrsg.: F. Klocke ..., Apprimus-Verl
Design and manufacturing of micro milling tools
Fleischer, J.; Deuchert, M.; Ruhs, C.; Kühlewein, C.; Halvadjiysky, G.; Schmidt, C.
2008. (Springer, Ed.) Microsystem technologies, 1771–1775
Influence of process parameters on the specific reaction forces and surface characteristics in orthogonal micro-cutting
Fleischer, J.; Schulze, V.; Deuchert, M.; Autenrieth, H.; Löhe, D.; Weber, A.
2008. Conference Proceedings 3rd International Conference on CIRP High Performance Cutting, 675–685, University College Dublin
Hybrid machining of microstructures using a combination of EDM-milling and laser ablation
Schulze, V.; Haupt, S.; Weber, P.
2008. The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, 14th - 17th July 2007
Lebenszyklusoptimierte Maschinen durch grenzlastnahen Einsatz von Maschinenelementen
Fleischer, J.; Munzinger, C.; Schopp, M.; Hennrich, H.; Broos, A.; Wieser, J.
2008. VDI (Ed.), Automation 2008 : Lösungen für die Zukunft ; Tagung Baden-Baden, 3. und 4. Juni 2008 ; [mit CD-ROM] / Der Automatisierungskongress in Deutschland. VDI/VDE-Gesellschaft Meß- und Automatisierungstechnik. [Tagungsleiter Kurt D. Bettenhausen ...], 101–104, VDI Verlag
Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. Manufacturing Systems and Technologies for the New Frontier : The 41st CIRP Conference on Manufacturing Systems May 26–28, 2008, Tokyo, Japan. Edited by Mamoru Mitsuishi, Kanji Ueda, Fumihiko Kimura, Springer
Automated Feeding of Micro Parts into a Measuring Machine
Fleischer, J.; Tröndle, M.; Ruprecht, E.; Dieckmann, A.-M.
2008. Proceedings of the 10th international conference of the European Society for Precision Engineering and Nanotechnology : May 31st - June 4th 2010, Delft, Netherlands. Ed.: H. Spaan ..., 98–101, Yokohama National University
Integration von Einkauf und Produktion
Fleischer, J.; Weiler, S.
2008. VDI-Z Integrierte Produktion, 74–77
Optimization of Maintenance Activities through Maintenance-Relevant Design
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.; Broos, A.
2008. CIRP Design Conference 2008 ; April 7 - 9, 2008, Enschede. Ed.: Fred J. A. M. van Houten, University of Twente
Potenziale zur Genauigkeitssteigerung durch die direkte Wegmessung bei Parallelkinematiken
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland: Hrsg.: Uwe Heisel, 261–278, Shaker
Mikroverzahnungsprüfkörper µ-DBA für evolventische Profillinienabweichungen
Fleischer, J.; Buchholz, I.; Härtig, F.; Dai, G.
2008. Technisches Messen, 75 (3), 168–177. doi:10.1524/teme.2008.0797
The automatic feeding of micro parts with flexible oscillating conveyors
Fleischer, J.; Munzinger, C.; Dieckmann, A.-M.; Prause, P.-J.; Bühner, K.; Tröndle, M.
2008. Proceedings of the 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2008, Volume 2, 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN, Zurich18 - 22 May 2008, 81–85, Euspen
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematiken. Hrsg.: Uwe Heisel, 97–118, Shaker
Efficient Maintenance of Machine Tools - Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. Manufacturing Systems and Technologies for the New Frontier: the 41st CIRP Conference on Manufacturing Systems, May 26-28, 2008, Tokyo, Japan. Ed.: Mamoru Mitsuishi ..., Springer
Schneidendämpfung optimiert Standzeit beim Drehen im unterbrochenem Schnitt
Fleischer, J.; Pabst, R.; Becke, C.
2008. Maschinenmarkt, (5), 38–42
Steigerung der Verfügbarkeit von Werkzeugmaschinen durch prozessparallele Last- und Verschleißüberwachung
Wagner, M.; Bayha, T.; Schopp, M.
2008. Life-cycle-Performance im Maschinen- und Anlagenbau: [wbk, Institut für Produktionstechnik, Universität Karlsruhe (TH)]. Ed.: Gisela Lanza, 114–132, Shaker
Zustandsabhängiger Einsatz von Remote Services - Berücksichtigung der tatsächlichen Belastungen für einen lebenszyklusoptimierten Betrieb
Schopp, M.
2008. 2. Jahrestagung "Globaler Remote Service im Maschinen- und Anlagenbau", 1.-5.6, Köln
Cost Estimation for Service Contracts through the Monte-Carlo Simulation
Fleischer, J.; Rühl, J.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 547–552, University of New South Wales
Availability Increase of Machine Tools through Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 388–393, University of New South Wales
Adapting Machining Performance to Load and Wear Levels
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. CIRP (Ed.), LCE 2008: 15th CIRP International Conference on Life Cycle Engineering: Conference Proceedings, 372–377, University of New South Wales
Statistical process and measurement control for micro production
Lanza, G.; Fleischer, J.; Schlipf, M.
2008. Microsystem Technologies, 14 (9-11), 1227–1232. doi:10.1007/s00542-007-0508-9
Quantitative analysis and optimization of the effectiveness of lean methods in small batch production
Lanza, G.; Peter, K.; Broos, A.
2008. 5th Optimization and Stochastic Days 2008, 20th - 21st November, Weimar, 1–9, Dynardo GmbH
Effektive Auswahl und Qualifizierung eines chinesischen Lieferanten
Lanza, G.; Weiler, S.
2008. VDMA-Nachrichten, 1–34
Conception of a Methodology for a Comprehensive Procurement Market Selection for Low-Cost Country Sourcing
Lanza, G.; Weiler, S.
2008. Y. Shi, J. Srai & M. Gregory (Eds.), Global value chains - capturing value in international manufacturing and supply networks : the 13th Annual International Manufacturing Symposium , 25th - 26th September 2008, Cambridge ; symposium proceedings (2008). Hrsg.: Shi, Yongjiang; Srai, Jag; Gregory, Mike, 1–23, University of Cambridge, Institute for Manufacturing
Challenges and user support in micro coordinate metrology
Lanza, G.; Peters, J.
2008. 1st International F25 User Meeting
Prediction of Functionality and Long-term Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Deigendesch, T.; Enkler, H. G.; Leslabay, P.; Oerding, J.; Viering, B.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology : May 18th - May 22nd 2008, Zürich, Switzerland. Ed.: H. Van Brussel, 270–274, European Society for Precision Engineering and Nanotechnology (euspen)
Model based Control of Surface Quality with regard to Micro Cutting Processes
Fleischer, J.; Lanza, G.; Kotschenreuther, J.; Deuchert, M.; Schlipf, M.; Smiljkovic, S.
2008. G. Byrne & G. OʾDonnell (Eds.), 3rd International Conference High Performance Cutting (HPC) : Dublin, Ireland, June 12 - 13th, 2008. Chairmen: Gerry Byrne, 775–784, University College Dublin
Statistical quality control in micro-manufacturing through multivariate μ-EWMA chart
Fleischer, J.; Lanza, G.; Schlipf, M.
2008. CIRP Annals-Manufacturing Technology, 57 (1), 521–524. doi:10.1016/j.cirp.2008.03.113
Application of statistical resampling techniques on CMM point clouds
Fleischer, J.; Lanza, G.; Peters, J.; Viering, B.
2008. H. Brussel (Ed.), 10th Anniversary International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN) 2008. Hrsg.: Hendrik Brussel, 280–284, European Society for Precision Engineering and Nanotechnology (euspen)
Quantified interdependencies between lean methods and production figures in the small series production
Fleischer, J.; Lanza, G.; Peter, K.
2008. M. Mitsuishi, K. Ueda & F. Kimura (Eds.), Manufacturing Systems and Technologies for the New Frontier. Ed.: Mitsuishi, Mamoru; Ueda, Kanji; Kimura, Fumihiko, 89–92, Springer. doi:10.1007/978-1-84800-267-8_17
Effizienzsteigerung der Instandhaltung von Werkzeugsystemen - Ableitung von angepassten Instandhaltungsintervallen und -inhalten
Munzinger, C.; Broos, A.; Hennrich, H.; Coerdt, F.; Schopp, M.; Wieser, J.
2008. KIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 345–354, Zillekens
Lebenszyklusoptimierte Maschinen durch grenzlastnahen Einsatz von Maschinenelementen - Ableitung und Bewertung angepasster Service-Szenarien
Fleischer, J.; Munzinger, C.; Schopp, M.; Broos, A.; Hennrich, H.; Wieser, J.
2008. AKIDA / Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung, 17./18. November 2010. Institut für Bergwerks- und Hüttenmaschinenkunde, RWTH Aachen. Hrsg.: Karl Nienhaus, 113–124, Zillekens
Development of a 5-Axis Micro-Test-Work Piece forMicro-Milling Machine Tools
Fleischer, J.; Deuchert, M.; Chlipala, M.
2008. Conference Proceedings 3rd International Conference on CIRP High Performance Cutting, Dublin 12.06.2008-13.06.2008
Entwicklung einer geschlossenen Auslegungsmethodik zur Modellierung und Optimierung des mechanischen Gesamtsystemverhaltens von Parallelkinematiken
Fleischer, J.; Albers, A.; Minx, J.; Broos, A.; Tröndle, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland. Hrsg.: U. Heisel, 97–117, Shaker Verlag
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Begleitband zum Fachgespräch Zerspanen im Modernen Produktionsprozess, Dortmund, 26.-27. Februar 2008, 233–243, ISF
Potenziale zur Genauigkeitssteigerung durch die direkte Wegmessung bei Parallelkinematiken
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. Fertigungsmaschinen mit Parallelkinematik - Forschung in Deutschland. Hrsg.: U. Heisel, 261–278, Shaker Verlag
Sustainable Design of Machine Tools through Load-Dependent Interventions and Adapted Services
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2008. Manufacturing systems and technologies for the new frontier: The 41st CIRP Conference on Manufacturing Systems, Tokyo, Japan, May 26 - 28, 2008. Ed.: M. Mitsuishi, 173–176, Springer
Efficient Maintenance of Machine Tools - Adapted Maintenance Activities and Assembly-Specific Maintenance Intervals
Fleischer, J.; Wieser, J.; Schopp, M.; Broos, A.
2008. Manufacturing systems and technologies for the new frontier: The 41st CIRP Conference on Manufacturing Systems, Tokyo, Japan, May 26 - 28, 2008. Ed.: M. Mitsuishi, 69–74, Springer
Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008
Lanza, G.; Munzinger, C.; Schulze, V.
2008. (H. Weule, Ed.), Shaker Verlag
Intelligente Komponenten zur Steigerung der Life-Cycle-Performance
Werner, P.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 102–113, Shaker Verlag
Aktuelle Trends im Bereich Life-Cycle-Performance
Lanza, G.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 1–15, Shaker Verlag
Instandhaltungsfreundliche Werkzeugmaschine
Gaukler, W.; Hennrich, H.; Wieser, J.
2008. Life-Cycle-Performance im Maschinen- und Anlagenbau: Tagungsband zur wbk Herbsttagung 2008. Hrsg.: G. Lanza, 82–101, Shaker Verlag
Modellierung des Wärmeeintrages bei der Trockenbearbeitung von Fahrzeugkomponenten aus Grauguss
Fleischer, J.; Pabst, R.; Zanger, F.
2008. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: K. Weinert, 530–541, Vulkan-Verlag
Process parameter analysis in ablating micro mold manufacturing
Fleischer, J.; Haupt, S.; Halvadjiysky, G.
2008. Microsystem Technologies, 14 (9/11), 1367–1372
Lebenszyklusoptimierte Antriebslösungen auf Basis eines Sensor-Getriebes
Fleischer, J.; Schopp, M.; Eidam, J.; Stahl, W.
2008. Konstruktion, (S1), 16–20
Statistical modelling of process parameters in micro cutting
Lanza, G.; Fleischer, J.; Kotschenreuther, J.; Peters, J.; Schlipf, M.
2008. Proceedings of the Institution of Mechanical Engineers / B, 222 (1), 15–22. doi:10.1243/09544054JEM853
Schneidendämpfung optimiert Standzeit beim Drehen mit unterbrochenem Schnitt
Fleischer, J.; Pabst, R.; Becke, C.
2008. MaschinenMarkt, 5, 38–42
Statistical quality control in micro-manufacturing through multivariate my-EWMA chart
Fleischer, J.; Lanza, G.; Schlipf, M.
2008. CIRP Annals - Manufacturing Technology, 57 (1), 521–524
Simulationsgestützte Konzeption von Handhabungskinematiken
Fleischer, J.; Schmidt-Ewig, J. P.
2008. wt Werkstattstechnik online, 98 (3), 176–184
Erfolgreicher technischer Einkauf in China
Fleischer, J.; Weiler, S.; Ender, T.; Wawerla, M.
2008. Industrie Management, 24 (1), 43–46
Mikroverzahnungsprüfkörper my-DBA für evolventische Profillinienabweichungen
Fleischer, J.; Buchholz, I.; Härtig, F.; Dai, G.
2008. tm - Technisches Messen, 75 (3), 168–177
Genauigkeitssteigerung bei der automatisierten Bearbeitung 3D-gerundeter Rohrprofile
Fleischer, J.; Lanza, G.; Schmidt-Ewig, J.; Ruch, D.
2008. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 103 (3), 144–150
Accuracy Improvement of a Machine Kinematics for the Product Flexible Machining of Curved Extrusion Profiles
Fleischer, J.; Schmidt-Ewig, J. P.
2008. Advanced Materials Research, 43, 123–134
Mechanical structuring, surface treatment and tribological characterization of steel mould inserts for micro powder injection moulding
Fleischer, J.; Schulze, V.; Kotschenreuther, J.; Löhe, D.; Schneider, J.; Kienzler, A.; Zum Gahr, K. H.
2008. Microsystem technologies, 14 (12), 1797–1803. doi:10.1007/s00542-008-0620-5
Aufwandsreduktion bei der Werkzeugmaschinensimulation - Anforderungen
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2008. wt Werkstattstechnik online, 98 (4), 321–326
Erfolgreich in China - Integration von Einkauf und Produktion
Fleischer, J.; Weiler, S.
2008. VDI-Z, 150 (4), 74–77
Ganzheitliche Produktionssysteme: Wann, Warum, Wie?
Lanza, G.; Peter, K.; Ude, J.
2008. Industrie-Management, 24, 49–52
Production of two-material micro-assemblies by two-componentpowder injection molding and sinter-joining
Ruh, A.; Dieckmann, A.-M.; Heldele, R.; Piotter, V.; Ruprecht, R.; Munzinger, C.; Fleischer, J.; Haußelt, J.
2008. Microsystem technologies, 14 (12), 1805–1811. doi:10.1007/s00542-008-0646-8
Trends bei der Entwicklung von Normalen für die Mikro- und Nanomesstechnik
Fleischer, J.; Buchholz, I.; Viering, B.
2008. tm - Technisches Messen, 75 (5), 288–297
Erfassung von Standardgeometrieelementen im Mikrometerbereich - Herausforderungen und Lösungsansätze
Fleischer, J.; Buchholz, I.; Peters, J.; Viering, B.
2008. tm - Technisches Messen, 75 (5), 327–338
An Approach to Accuracy Improvements in the Flexible Machining of Curved Profiles
Lanza, G.; Fleischer, J.; Ruch, D.
2008. Advanced materials research, 43, 123–134. doi:10.4028/www.scientific.net/AMR.43.123
Mikrobohrverfahren für den industriellen Einsatz
Fleischer, J.; Schlipf, M.; Ehninger, C.; Oßwald, K.
2008. wt Werkstattstechnik online, 98 (6), 515–519
Erhöhte Nachgiebigkeit steigert Standzeiten beim Fräsen
Schulze, V.; Becke, C.; Pabst, R.
2008. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, (7/8), 475–479
Lastabhängige Restlebensdauerprognose von Maschinenkomponenten
Fleischer, J.; Werner, P.; Rühl, J.
2008. wt Werkstattstechnik online, 98 (7/8), 549–554
Intelligente Instandhaltung von Werkzeugmaschinen
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.
2008. wt Werkstattstechnik online, 98 (7/8), 538–544
Ermittlung der Komponentenbelastungen von Werkzeugmaschinen für einen lebenszyklusoptimalen Betrieb
Fleischer, J.; Munzinger, C.; Schopp, M.; Hennrich, H.; Broos, A.; Wieser, J.
2008. atp-edition, 50 (7), 45–52
Verfügbarkeitsoptimale Dienstleistungskonfiguration
Fleischer, J.; Meier, H.; Kaiser, U.; Kings, R.; Niggeschmidt, S.
2008. wt Werkstattstechnik online, 98 (7/8), 601–606
Diagnóstico e prognóstico remotos de falhas evitam paradas e melhoram a manutenção
Fleischer, J.; Schmalzried, S.; Schopp, M.
2008. MM Máquinas e Matails, XLIV (512), 54–67
Flexible Zuführung von Mikrobauteilen mit Schwingförderern
Munzinger, C.; Tröndle, M.
2008. wt Werkstattstechnik online, 98 (9), 697–700
Sinterfügen von Micro-PIM-Bauteilen - Ein Montagekonzept in der Mikrotechnik
Munzinger, C.; Rögner, J.; Dieckmann, A.-M.
2008. wt Werkstattstechnik online, 98 (9), 701–705
Improving tool life by varying resilience and damping properties in close proximity of the cutting edge
Fleischer, J.; Becke, C.; Pabst, R.
2008. Production Engineering, 2 (4), 357–364
Kostensimulation für Instandhaltungsverträge
Lanza, G.; Rühl, J.; Werner, P.
2008. wt Werkstattstechnik online, 98 (9), 760 – 765
Dämpfend fixierte Wendeschneidplatte verbessert Standzeit beim Fräsen
Fleischer, J.; Pabst, R.; Becke, C.
2008. MM - Das IndustrieMagazin, 36, 64–67
Von der Folie zum Bauteil
Munzinger, C.; Dieckmann, A.-M.; Ruprecht, E.
2008. wt Werkstattstechnik online, 98 (9), 693–696
Simulationsunterstützte Entwicklung einer parallelen Achsanordnung - Räumwerkzeugschleifmaschine mit Parallelkinematik
Munzinger, C.; Broos, A.; Kipfmüller, M.; Lang, H.
2008. VDI-Z integrierte Produktion, 150 (9), 96–97
Energiewandler für den Einsatz in energieautarken Funktionsmodulen
Munzinger, C.; Weis, M.; Herder, S.
2008. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 103 (10), 700–704
Intelligentes hydrostatisches Führungssystem
Munzinger, C.; Weis, M.; Herder, S.
2008. O+P Ölhydraulik und Pneumatik, (11/12), 592–595
Mit Mikrobahnerosion zum perfekten Formeinsatz
Schulze, V.; Ruhs, C.
2008. Mikroproduktion, (5), 34–37
Kompensation des Größeneffekts "Schneidkantenversatz" im Mikrofräsprozess
Schulze, V.; Deuchert, M.; Ruhs, C.
2008. nc transfer, 16 (41), 17
Accuracy improvement of a machine kinematics for the product flexible machining of curved extrusion profiles
Fleischer, J.; Schmidt-Ewig, J. P.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 135–144, Trans Tech Publications
Influence of process parameters on structure and mechanical properties of joints produced by electromagnetic forming and friction stir welding
Barreiro, P.; Schulze, V.; Löhe, D.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 47–56, Trans Tech Publications
Accuracy of a flying cutting device
Munzinger, C.; Fleischer, J.; Stengel, G.; Schneider, M.
2008. Flexible manufacture of lightweight frame structures. Ed.: K. Weinert, 23–36, Trans Tech Publications
Flexible manufacture of lightweight frame structures. Phase II: integration
Weinert, K.; Fleischer, J.; Tekkaya, A. E.; Zäh, M.
2008. (M. Schikorra, Ed.), Trans Tech Publications
Prediction of Functionality and Life Cycle Performance of Microgears
Albers, A.; Lanza, G.; Fleischer, J.; Oerding, J.; Deigendesch, T.; Enkler, H.-G.; Leslabay, P.; Schlipf, M.
2008. Proceedings of the 10th anniversary international conference of the European Society for Precision Engineering and Nanotechnology. Ed.: H. Van Brussel, European Society for Precision Engineering and Nanotechnology (euspen)
Lebenszyklusorientiertes interorganisationelles Anlagencontrolling. PhD dissertation
Weismann, U.
2008. Shaker Verlag
OptiSLang & emPlant for Process Simulation
Broos, A.; Peter, K.; Wieser, J.; Magnusdottir, H.; Burg, J.
2007. Weimarer Optimierungs- und Stochastiktage 4.0: Weimar 29.-30. Nov. 2007, Dynardo
Formeinsatzherstellung durch Integration der abtragenden Verfahren Laserablation und Funkenerosion
Fleischer, J.; Haupt, S.; Halvadjiysky, G.
2007. Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen ; 22. und 23. November 2007, Karlsruhe. Hrsg.: O. Kraft, 109–114, Forschungszentrum Karlsruhe (FZKA)
Ganzheitliche Optimierung von Werkzeugmaschinen - Methoden, Maßnahmen und Machbarkeit
Broos, A.; Fleischer, J.
2007. Seminar Mechatronik: Vorsprung durch Simulation , Garching, 18. Oktober 2007. Hrsg.: M. Zäh, Art.-Nr. 3–1, Utz
Bewertungssystem zum Vergleich und zur Auswahl von Sensoren in der Multisensor-Koordinatenmesstechnik
Fleischer, J.; Peters, J.; Buchholz, I.
2007. Mikrosystemtechnik Kongress 2007, VDE Verlag
Laser material processing of micro structures by using picosecond lasers
Fleischer, J.; Haupt, S.
2007. Laser assisted net shape engineering 5: Proceedings of the 5th LANE 2007. Ed.: M. Geiger, 1187–1193
Direct Pose Measurement - A Suitable Way to Increase the Accuracy of Parallel Robots?
Munzinger, C.; Kipfmüller, M.
2007. Proceedings of the ASME 2007 International Design Engineering Technical Conferences & Computers and Information Engineering Conference, The American Society of Mechanical Engineers (ASME)
Heat Flow Simulation for Dry Machining of Power Train Castings
Fleischer, J.; Pabst, R.; Kelemen, S.
2007. (Elsevier, Ed.) CIRP annals, manufacturing technology, 56 (1), 117–122. doi:10.1016/j.cirp.2007.05.030
Life cycle performance for manufactures of production facilities
Rühl, J.; Fleischer, J.
2007. 3rd International Conference on LifeCycle Management: Zurich, University of Zurich at Irchel ; August 27 to 29, 2007
Modularization and simulation-based optimization of work piece handling in manufacturing cells
Fleischer, J.; Wieser, J.
2007. The Institution of Engineering and Technology International Conference on Agile Manufacturing: (ICAM 2007) ; 9-11 July 2007, Collingwood College, Durham University, Durham, UK / organised by the Institution of Engineering and Technology Manufacturing Enterprise Network, 51–56, Institution of Engineering and Technology (IET). doi:10.1049/cp:20070007
Micro structuring by ultra short pulsed laser ablation
Fleischer, J.; Haupt, S.
2007. Laser metrology and machine performance VIII : 8th International Conference on Laser Metrology, Machine Tool, CMM & Robotic Performance ; Lamdamap 2007, 169–174, European Society for Precision Engineering and Nanotechnology (euspen)
Online ablation control in micro structuring with ultrashort laser pulses
Fleischer, J.; Haupt, S.
2007. Proceedings of the 40th CIRP International Seminar on Manufacturing Systems
Machine life cycle cost estimation via Monte-Carlo simulation
Fleischer, J.; Wawerla, M.; Niggeschmidt, S.
2007. Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 449–453, Springer. doi:10.1007/978-1-84628-935-4_78
Optimizing the Life-Cycle-Performance of Machine Tools by Reliability and Availability Prognosis
Fleischer, J.; Niggeschmidt, S.; Wawerla, M.
2007. Springer (Ed.), Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Waseda University, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 329–334, Springer. doi:10.1007/978-1-84628-935-4_57
Dimensioning of Multifunctional Piezoelectric Transducers for Machine Tools
Munzinger, C.; Weis, M.; Herder, S.
2007. Adaptronic Congress: 23.–24.05.2007, Göttingen
Process Chain for the Manufacturing of Micro Parts and Molds
Fleischer, J.; Schlipf, M.; Deuchert, M.; Dieckmann, A.-M.
2007. 7th International Conference of the European Society for Precision Engineering and Nanotechnology (EUSPEN): 20–24 May 2007, Bremen, Germany
Aspects of estimating CMM measurement uncertainty for micro parts with respect to similarity requirements and influences of manufacturing processes
Fleischer, J.; Schlipf, M.; Behrens, I.; Peters, J.
2007. Proceedings of the 7th international conference / European Society for Precision Engineering and Nanotechnology: May 20th - May 24th 2007, Bremen, Germany. Ed.: E. Thornett, 349–352, European Society for Precision Engineering and Nanotechnology (euspen)
Mass production in µMIM: putting theory to work
Fleischer, J.; Walcher, H.; Maetzig, M.; Dieckmann, A.-M.
2007. Metal Powder Report, (3), 18–20. doi:10.1016/S0026-0657(07)70062-0
Prognose der Maschinenzuverlassigkeit unter Berucksichtigung optionaler Ausstattungskomponenten und Serviceleistungen
Fleischer, J.; Niggeschmidt, S.
2007. TTZ 2007 : Entwicklung und Betrieb zuverlässiger Produkte; Tagung Stuttgart, 22. und 23. März 2007 / VDI-Gesellschaft Systementwicklung und Projektgestaltung, 77–90, VDI Verlag
A Geometrical Standard for Micro Gears
Fleischer, J.; Behrens, I.; Komori, M.; Okamoto, K.; Kubo, A.; Härtig, F.; Dai, G.
2007. 10th CIRP Conference on Computer Aided Tolerancing, Specification and Verification for Assemblies : March 21st - 23rd, 2007 in Erlangen, Germany ; Proceedings. Ed.: A. Weckenmann, Shaker
Einsatz und Potential der Mehrkörpersimulation für die Ermittlung von Komponentenbelastungen bei Werkzeugmaschinen
Fleischer, J.; Munzinger, C.; Broos, A.; Schopp, M.; Wieser, J.; Hennrich, H.
2007. V. der Wissenschaften GmbH (Ed.), Tagungsband Dresdner Maschinenelemente Kolloquium – DMK 2007, Dresden, 5. 6.12.2007, Dresden., 425–432, Verlag der Wissenschaften GmbH
Steigerung der Zuverlässigkeit von Werkzeugmaschinen durch den Aufbau eines FMEA-gestützten "Condition Monitoring"-Systems = Increasing the reliability of machine tools by use of an FMEA-based condition monitoring system
Fleischer, J.; Schopp, M.
2007. TTZ 2007: Entwicklung und Betrieb zuverlässiger Produkte; Tagung Stuttgart, 22. und 23. März 2007 / VDI-Gesellschaft Systementwicklung und Projektgestaltung, 55–64, VDI Verlag
Einsatz von Schwingungssignalen zur Zustandsdiagnose und -prognose bei einer Werkzeugmaschine = Use of vibration signals for condition diagnosis and prognosis of machine tools
Fleischer, J.; Schopp, M.
2007. Schwingungsüberwachung und Diagnose von Maschinen: Tagung Würzburg, 27. und 28. Februar 2007 ; VDI-Schwingungstagung 2007, 169–183, VDI Verlag
Qualitätssicherung für Mikrofertigungsprozesse und urgeformte Mikrobauteile
Lanza, G.; Fleischer, J.; Schlipf, M.
2007. Kolloquium Mikroproduktion : Fortschritte, Verfahren, Anwendungen ; 22. und 23. November 2007, Karlsruhe. Hrsg.: O. Kraft, 121–127, Forschungszentrum Karlsruhe (FZKA)
A Simulation based Resource Planning Model for Production Ramp-ups
Lanza, G.; Fleischer, J.; Ender, T.
2007. Proceedings of the 40th CIRP International Seminar on Manufacturing Systems 2007
ProactAS - Die Idee
Lanza, G.; Ender, T.
2007. J. Fleischer (Ed.), Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 1–10, VDMA Verlag
A Concept for the Configuration of Value Added Networks Based on Quality Capabilities During Ramp-Up
Lanza, G.; Ude, J.
2007. P. F. Cunha & P. G. Maropoulos (Eds.), Digital enterprise technology : perspectives and future challenges : [papers accepted and presented at the 3. CIRP sponsored International Conference in Digital Enterprise Technology (DET ’06) held in Setubal, Portugal, in September 2006] / ed. by Pedro F. Cunha; Paul G. Maropoulos, 393–400, Springer
Capability-Oriented Configuration of Global Value Added Networks
Fleischer, J.; Lanza, G.; Ude, J.; Sternemann, K.; Herm, M.; Homann, T.
2007. Proceedings: 12th Annual Cambridge International Manufacturing Symposium 2007 ; 28 September 2007, Cambridge, UK, 40–53
Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS)
Fleischer, J.; Nyhuis, P.; Schuh, G.; Serwotka, H. (Eds.)
2007. VDMA Verlag
Diagnosemöglichkeiten im Produktionsanlauf
Ordenewitz, R.; Schopp, M.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 28–43, VDMA Verlag
Sustainable Machine Tool Reliability based on Condition Diagnosis and Prognosis
Fleischer, J.; Schopp, M.
2007. Advances in Life Cycle Engineering for Sustainable Manufacturing Businesses: Proceedings of the 14th CIRP Conference on Life Cycle Engineering, Tokyo, Japan, June 11th-13th, 2007. Ed.: S. Takata, 323–328, Springer
Fliegendes Abtrennen
Fleischer, J.; Munzinger, C.; Stengel, G.; Schneider, M.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 107–130, VDI Verlag
Kombinierte Handhabungs- und Bearbeitungskinematik
Fleischer, J.; Munzinger, C.; Schmidt-Ewig, J. P.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 397–423, VDI Verlag
Flexible und intelligente Greiftechnik
Lanza, G.; Fleischer, J.; Ruch, D.
2007. Integration von Umformen, Trennen und Fügen für die flexible Fertigung von leichten Tragwerkstrukturen: Ergebnisbericht der Phase I. Hrsg.: M. Kleiner, 371–396, VDI Verlag
Adaptronische hydrostatische Drucktascheneinheit auf Basis neuer Aktoren für aktive Führungssysteme
Munzinger, C.; Knödel, A.; Herder, S.; Weis, M.
2007. Bericht zum 2. Berichtskolloquium des DFG SPP 1156 Adaptronik für Werkzeugmaschinen, Braunschweig, 15. Februar 2007, 321–322, Braunschweig
A concept for the configuration of Value Added Networks based on quality capabilities during ramp-up
Lanza, G.; Ude, J.
2007. Digital Enterprise Technology: Perspectives and Future Challenges. Ed.: P. F. Cunha, 393–400, Springer US
Prognosemöglichkeiten im Produktionsanlauf
Ender, T.; Heins, M.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 44–68, VDMA Verlag
ProactAS - Die Idee
Lanza, G.; Ender, T.
2007. Proaktive Anlaufsteuerung entlang der Wertschöpfungskette von Produktionssystemen (ProactAS). Hrsg.: J. Fleischer, 1–10, VDMA Verlag
Influence of cyclic temperature changes on the microstructure of AISI 4140 after laser surface hardening
Miokovic, T.; Schulze, V.; Vöhringer, O.; Löhe, D.
2007. Acta Materialia, 55 (2), 589–599
HarWeST - Handhabungsgerechte Werkzeugmaschinen für die künftige Serienfertigung kubischer Teile
Fleischer, J.; Munzinger, C.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (1/2), 65–72
Ressourcenmanagement für erfolgreiche Produktionsanläufe
Fleischer, J.; Ender, T.; Mössner, A.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (1/2), 42–45
LICMA - Life Cycle Performance im Maschinen- und Anlagenbau
Fleischer, J.; Rühl, J.; Weismann, U.; Faigle, B.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (1/2), 55–59
Mass production in myMIM: putting theory to work
Fleischer, J.; Walcher, H.; Maetzig, M.; Dieckmann, A.-M.
2007. Metal Powder Report, 62 (3), 18–20
Homogenisierung des Steifigkeitsverlaufes von Werkzeugmaschinen
Fleischer, J.; Tröndle, M.
2007. wt Werkstattstechnik online, 97 (3), 178–182
Bewertung der Anlauffähigkeit in Netzwerken
Lanza, G.; Ude, J.; Fronia, P.
2007. wt Werkstattstechnik online, 97 (4), 262–266
Rechnerunterstützte Planung der Messung von Mikrobauteilen
Fleischer, J.; Peters, J.; Behrens, I.; Schlipf, M.
2007. inno: Innovative Technik - Neue Anwendungen, 12 (36), 6
Optimierung von Produktionsabläufen in einem Niedriglohnland
Fleischer, J.; Ender, T.; Zäh, M.; Ostgathe, M.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (6), 361–366
Leistungskalkulation hybrider Produkte
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (7/8), 526–532
Datenbasis für lastabhängige Prozesseingriffe - Modularisierung und Analyse von Ausfallursachen zur Erhöhung der Verfügbarkeit von Werkzeugmaschinen
Fleischer, J.; Schopp, M.; Broos, A.; Wieser, J.
2007. wt Werkstattstechnik online, 97 (7/8), 491–497
Modulares Greifsystem für die Verpackungstechnik
Munzinger, C.; Köhler, G.; Ruch, D.; Simm, T.
2007. wt Werkstattstechnik online, 97 (9), 676–682
Modularisierung komplexer Produktionsanlagen - Analyse von Störgrößen und Verfügbarkeitsbestimmung am Beispiel von Getränkeabfüllanlagen
Fleischer, J.; Wieser, J.; Schopp, M.; Oestreicher, T.; Zölfl, M.; Hahn, W.
2007. wt Werkstattstechnik online, 97 (9), 668–675
Mechanical module interfaces for reconfigurable machine tools
Fleischer, J.; Wieser, J.; Abele, E.; Wörn, A.; Martin, P.; Klöpper, R.
2007. Production Engineering, 1 (4), 421–428
Business Capabilities as configuration elements of value added networks
Fleischer, J.; Herm, M.; Ude, J.
2007. Production Engineering, 1 (2), 187–192
Simulation and optimization of complete mechanical behaviour of machine tools
Fleischer, J.; Munzinger, C.; Tröndle, M.
2007. Production Engineering, 2 (1), 85–90
Entwicklung eines Bewertungssystems für Instandhaltungstätigkeiten an Werkzeugmaschinen
Fleischer, J.; Wieser, J.; Hennrich, H.; Schopp, M.; Broos, A.
2007. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 102 (11), 756–764
Fertigungsverfahren in der Mikrotechnik
Fleischer, J.; Löhe, D.; Kotschenreuther, J.; Schulze, V.; Deuchert, M.; Halvadjiysky, G.; Haupt, S.; Kienzler, A.
2007. wt Werkstattstechnik online, 97 (11/12), 847–851
Erfolgreicher Einkauf in China durch Zukaufteilanalyse
Fleischer, J.; Weiler, S.
2007. VDI-Z, 149 (III), 67–70
Adaptronische Strebe zur Steifigkeitssteigerung von Werkzeugmaschinen. PhD dissertation
Munzinger, C.
2007. Shaker Verlag
Kopplung von Mehrkörpersimulation und Topologieoptimierung
Tröndle, M.; Minx, J.
2006. Abschlussbericht des Verbundprojektes "Integration von CA-Techniken zur ganzheitlichen Simulation und Optimierung von Fertigungseinrichtungen vom CAD bis hin zur Hardware-in-the-Loop-Simulation (SimCAT)": Tagungsband zum Abschlusskolloquium ; Karlsruhe, 14.11.2006, 85–94, Universität Karlsruhe (TH)
Methodical Planning Approach for Flexible and Scalable Assembly of Micro-Mechatronical Products
Fleischer, J.; Volkmann, T.; Krahtov, L.
2006. First CIRP International Seminar on Assembly Systems: November 15 – 17, 2006. Ed.: E. Westkämper, 49–54, Fraunhofer IRB Verlag
Post processing of EDM-machined microstructures by ultra short pulsed laser ablation
Fleischer, J.; Schmidt, J.; Haupt, S.
2006. ICALEO (Ed.), 25th International Congress on applications of laser & electro-optics (ICALEO 2006) Hrsg.: ICALEO. 30–November 2, 2006. Scottsdale, AZ, USA October, M305, Laser Institute of America. doi:10.2351/1.5060889
Zustandsprognose auf Basis von konsequenter Online-Diagnose an hoch belasteten Maschinenkomponenten
Fleischer, J.; Schopp, M.; Schmalzried, S.
2006. AKIDA (Ed.), Tagungsband zum 6. Aachener Kolloquium für Instandhaltung, Diagnose und Anlagenüberwachung (AKIDA), 439–446, RWTH Aachen
Simulation von Zerspanprozessen unter Berücksichtigung des dynamischen Maschinenverhaltens
Fleischer, J.; Schermann, T.; Schmidt, C.; Marsolek, J.
2006. Tagungsband. 18. Deutschsprachige ABAQUS-Benutzerkonferenz 2006: 18. und 19. September 2006, Erfurt. [Proceedings]. Hrsg.: M. Küssner
Hochintegrierte adaptronische Stellachse für Linearbewegungen im Mikrometerbereich
Fleischer, J.; Munzinger, C.; Weis, M.
2006. Elektrisch-mechanische Antriebssysteme: Innovationen, Trends, Mechatronik ; Tagung Böblingen, 27. und 28. September 2006, 49–58, VDI Verlag
Workpiece and Tool Handling in Metal Cutting Machines
Fleischer, J.; Denkena, B.; Winfough, B.; Mori, M.
2006. Annals of the CIRP Vol. 55/2/2006., 55 (2), 817–839. doi:10.1016/j.cirp.2006.10.009
Plant Planning Projects in Value Added Networks
Fleischer, J.; Stepping, A.; Peter, K.
2006. 5th CIRP International Seminar on Intelligent Computation Manufacturing Engineering (CIRP ICME 06): 25–28 July 2006, Ischia, Italy, 659–663
Robotergestützte Herstellung räumlich gekrümmter Aluminiumprofile
Stengel, G.
2006. 2. Fraunhofer IPA Workshop „Bearbeiten mit Industrierobotern“: 21. Juni 2006, Stuttgart-Vaihingen
Calculation and optimisation model for costs and effects of availability relevant service elements
Fleischer, J.; Weismann, U.; Niggeschmidt, S.
2006. Towards a closed loop economy: LCE 2006 ; proceedings of the 13th CIRP International Conference on Life Cycle Engineering ; held at the Katholieke Universiteit Leuven, Belgium, May 31st - June 2nd, 2006. Ed.: J. R. Duflou, 675–680, Katholieke Universiteit Leuven (KU Leuven)
Thermal micro-sinter-joining as a potential enhancement for an automated process chain for μPIM Bevel Gears
Fleischer, J.; Dieckmann, A.-M.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 112–115, European Society for Precision Engineering and Nanotechnology (euspen)
Capillary Tool Electrode with Fluid Removal Medium for Wear Compensation in EDM
Fleischer, J.; Schmidt, J.; Halvadjiysky, G.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 441–444, European Society for Precision Engineering and Nanotechnology (euspen)
Flexible Platform for the Production of Micro-Mechatronical Products
Fleischer, J.; Volkmann, T.; Krahtov, L.
2006. Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th–June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 180–183, European Society for Precision Engineering and Nanotechnology (euspen)
Aspects of the simulation of a cutting process with ABAQUS/Explicit including the interaction between the cutting process and the dynamic behaviour of the machine tool
Fleischer, J.; Schermann, T.; Marsolek, J.; Schmidt, C.
2006. Proceedings of the 9th CIRP International Workshop on Modeling of Machining Operations: May 11–12, 2006, Bled, Slovenia. Ed.: I. Grabec, University of Ljubljana
Entwicklungsbeispiele adaptronischer Komponenten für Werkzeugmaschinen - Ausgleich niederfrequenter Verlagerungen
Munzinger, C.; Knödel, A.; Weis, M.
2006. Adaptronic Congress 2006: 3–4 May 2006, Göttingen
Investigation on the Increase of Accuracy by the Use of Direct Pose Measurement
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2006. Parallel kinematic machines in research and practice: the 5th Chemnitz Parallel Kinematics Seminar, April 25 - 26, 2006; [proceedings] / PKS 2006. Fraunhofer Institut Werkzeugmaschinen und Umformtechnik. Hrsg.: R. Neugebauer, 851–854, Verlag Wissenschaftliche Skripten
Active Hydrostatic Guiding System with Integrated Adaptronic Sensor/Actuator-Unit
Fleischer, J.; Knödel, A.; Munzinger, C.
2006. Customer benefits of fluid power : conference proceedings ; 5th International Fluid Power Conference, Aachen, Germany, [March 20th till 22nd 2006 ; 5. IFK], 115–125, Shaker Verlag
Conception of a scalable production for micro-mechatronical products: Systematics for planning and platform with process modules for the production of micro-mechatronical products
Fleischer, J.; Krahtov, L.; Volkmann, T.
2006. S. Ratchev (Ed.), Precision Assembly Technologies for Mini and Micro Products: Proceedings of the IFIP TC5 WG5.5 Third International Precision Assembly Seminar (IPAS’2006), 19-21 February 2006, Bad Hofgastein, Austria. Ed.: S. Ratchev, 201–213, Springer. doi:10.1007/0-387-31277-3_20
Designing Adaptronical Components for Compensation of Static and Quasi-Static Loads
Fleischer, J.; Knödel, A.; Munzinger, C.; Weis, M.
2006. ASME (Ed.), Volume 2: 30th Annual Mechanisms and Robotics Conference, Parts A and B. ASME. Philadelphia, PA, USA, 10.09.2006–13.09.2006, 13–22, ASMEDC. doi:10.1115/DETC2006-99461
Modeling of Quality Development during Production Ramp-up by Elementary Processes
Lanza, G.; Fleischer, J.; Ender, T.
2006. P. Butala (Ed.), The morpholoty of innovative manufacturing systems : 39th CIRP International Seminar on Manufacturing Systems, Ljubljana, June 7th - 9th, 2006. Ed.: P. Butala, 505–510, University of Ljubljana
Process parameter analysis on surface roughness and process forces in micro cutting
Fleischer, J.; Lanza, G.; Schlipf, M.; Kotschenreuther, J.; Peters, J.
2006. W. Menz (Ed.), 4M 2006: Second International Conference on Multi-Material Micro Manufacture: 20–22 September 2006, Grenoble, France. Ed.: W. Menz, 289–292, Elsevier. doi:10.1016/B978-008045263-0/50065-9
Statistical Quality Assurance in High Precision Engineering
Fleischer, J.; Lanza, G.; Schlipf, M.
2006. H. Zervos (Ed.), Proceedings of the 6th international conference / European Society for Precision Engineering and Nanotechnology: May 28th-June 1st, 2006, Baden bei Wien, Vienna [Austria]. Ed.: H. Zervos, 430–433, European Society for Precision Engineering and Nanotechnology (euspen)
3D-Laser Processing of Spatially Curved Profiles
Fleischer, J.; Kies, S.; Munzinger, C.; Rilli, R.
2006. Flexible manufacture of lightweight frame structures: Proceedings. Ed.: K. Weinert, 43–52, Trans Tech
Identifying availability contribution of lifecycle-adapted services
Fleischer, J.; Nesges, D.
2006. Innovation in Life Cycle Engineering and Sustainable Development. Ed.: D. Brissaud, 209–222, Springer Netherlands
Flying Cutting of Spatially Curved Extrusion Profiles
Munzinger, C.; Fleischer, J.; Stengel, G.
2006. Flexible manufacture of lightweight frame structures: Proceedings. Ed.: K. Weinert, 35–42, Trans Tech
Stability of residual stresses in longitudinally and transversally deep rolled sintered iron under quasistatic and cyclic loading
Merkel, J.; Schulze, V.; Wanner, A.; Löhe, D.; Vöhringer, O.
2006. International Journal of Materials Research, 97 (10), 1304–1311
Mechanical strength and microstructure of Stabilor-G® and ZrO2 microspecimens
Schulze, V.; Auhorn, M.; Kasanicka, B.; Beck, T.; Löhe, D.
2006. Microsystem Technologies, 12 (7), 713–716
Computer Aided Simulation of Heat Treatment (C.A.S.H.) - Teil 4: Strategien zur Wärmebehandlungssimulation komplexer Stahl-Bauteile
Trapp, N.; Fiderer, M.; Lütjens, J.; Ehlers, M.; Schulze, V.; N. Trapp; M. Fiderer; J. Lütjens; M. Ehlers; V. Schulze.
2006. HTM - Journal of Heat Treatment and Materials, 61 (1), 25–33
Guiding and Cutting Spatially Curved Extruded Profiles
Fleischer, J.; Munzinger, C.; Kies, S.; Stengel, G.
2006. Production Engineering, 13 (1), 49–52
Design and Optimization of an Innovative Machine Kinematics for Combined Handling and Machining
Fleischer, J.; Schmidt-Ewig, J. P.
2006. Advanced Materials Research, 10, 163–172
Messung von Mikro-Verzahnungen - Entwicklung multisensorieller Messstrategien in der KMT
Fleischer, J.; Behrens, I.
2006. tm - Technisches Messen, 73 (1), 51–59
Quality Benchmarking for Micro Manufacturing Processes
Fleischer, J.; Lanza, G.; Schlipf, M.; Kotschenreuther, J.
2006. Production engineering, 13 (2), 169–172
Steigerung der Effizienz im Produktionsanlauf
Ender, T.; Rühmann, N.
2006. Unternehmen der Zukunft, 7 (2), 16–19
Neue Prozessketten für die Simulation
Lanza, G.; Herm, M.; Ude, J.
2006. wt Werkstattstechnik online, 96 (1/2), 24–29
Vom Senkerodieren zum mehrachsigen Erodierfräsen
Fleischer, J.; Haupt, S.; Halvadjiysky, G.; Quadroni, A.
2006. Mikroproduktion, (3), 44–45
Anlaufleistung in Wertschöpfungsnetzwerken
Lanza, G.; Herm, M.; Ude, J.
2006. wt Werkstattstechnik online, 96 (4), 233–238
Combination of a Parallel and a Serial Kinematics for the Integrated Handling and Machining of Lightweight Extrusion Structures
Fleischer, J.; Schmidt-Ewig, J. P.
2006. Proceedings / Parallel kinematic machines in research and practice: The 5th Chemnitz Parallel Kinematics Seminar, PKS 2006, April 25 - 26, 2006. Ed.: R. Neugebauer, 289–306, Verl. Wissenschaftliche Scripten
The manufacturing of micro molds by conventional and energy-assisted processes
Fleischer, J.; Kotschenreuther, J.
2006. The International Journal of Advanced Manufacturing Technology, 33 (1/2), 75–85
Bedeutung von Life Cycle Cost im Werkzeugmaschinenbau
Fleischer, J.; Wawerla, M.; Niggeschmidt, S.
2006. VDMA-Nachrichten, (5), 42–43
Combination of electric discharge machining and laser ablation in microstructuring of hardened steels
Fleischer, J.; Schmidt, J.; Haupt, S.
2006. Microsystem Technologies, 12 (7), 697–701
Ein dynamisches Klassifizierungsverfahren
Fleischer, J.; Ender, T.
2006. wt Werkstattstechnik online, 96 (6), 417–421
Scope Planning in Plant Planning Projects
Fleischer, J.; Stepping, A.
2006. Production Engineering, 8 (1), 161–166
Mit gebündeltem Know-how systematisch trockenlegen
Schmalzried, S.; Pabst, R.; Sellmer, D.; Schuwerk, J.; Wellner, C.
2006. WB Werkstatt + Betrieb, 139 (7/8), 44–47
Maschinentechnik zur flexiblen Herstellung räumlich gekrümmter Strangpressprofile
Fleischer, J.; Lanza, G.; Munzinger, C.; Schmidt-Ewig, J.; Ruch, D.; Schneider, M.
2006. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (7/8), 426–430
Automation of the Powder-Injection-Moulding Process
Fleischer, J.; Dieckmann, A.-M.
2006. Microsystem Technologies, 12 (7), 702–706
Neunmal Nebenzeit einsparen
Fleischer, J.; Peter, K.; Ender, T.
2006. WB Werkstatt + Betrieb, 139 (7/8), 74–77
Quality Assurance in Micro Production
Fleischer, J.; Lanza, G.; Schlipf, M.; Behrens, I.
2006. Microsystem technologies, 12 (7), 707–712
Verfügbarkeits- und Lebenszykluskostenprognose - Ein Ansatz zur Steigerung der Life-Cycle-Performance im Maschinen- und Anlagenbau
Fleischer, J.; Weismann, U.; Niggeschmidt, S.
2006. wt Werkstattstechnik online, 96 (7/8), 483–488
Maschinenüberwachung unter Life-Cycle-Aspekten - Zustandsprognose durch konsequente Online-Diagnose an hoch belasteten Maschinenkomponenten
Fleischer, J.; Weismann, U.; Schmalzried, S.; Schopp, M.
2006. wt Werkstattstechnik online, 96 (7/8), 435–440
Interorganisationelles Anlagencontrolling
Fleischer, J.; Weismann, U.
2006. wt Werkstattstechnik online, 96 (7/8), 477–482
Net Shape Reaction Bonded Ceramic Micro Parts by Mechanical Microstructuring
Ritzhaupt-Kleissl, H.-J.; Binder, J. R.; Gietzelt, T.; Kotschenreuther, J.
2006. Advanced engineering materials, 8 (10), 983–988. doi:10.1002/adem.200600052
Sensitivitätsbetrachtungen bei der Zerspansimulation
Schmidt, J.; Schermann, T.; Schmidt, C.
2006. VDI-Z Integrierte Produktion, 148 (II), 59–61
Wissensmanagement und Simulation steigern die Effizienz im Produktionsanlauf
Fleischer, J.; Ender, T.; Rühmann, N.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (7/8), 412–415
Entwicklung von Low Cost-Lieferanten
Fleischer, J.; Wawerla, M.; Weiler, S.
2006. Produktion, (37)
Planungsansatz für die Mikromontage
Fleischer, J.; Krahtov, L.; Volkmann, T.
2006. wt Werkstattstechnik online, 96 (9), 602–607
Intelligente Automatisierung mit hoher Flexibilität - Modulares, mehrachsiges Handhabungssystem
Wieser, J.; Burghardt, S.; Schappacher, H.
2006. Handling - Magazin für Automation, Handhabungstechnik und Logistik, (9), 40–43
Effiziente Diagnosestrategien für einen schnellen Ramp-up
Fleischer, J.; Schopp, M.; Ender, T.; Ordenewitz, R.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (9), 509–513
Ein simulationsgestütztes Optimierungskonzept für Produktionssysteme
Fleischer, J.; Ender, T.; Wienholdt, H.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (9), 480–485
Verkürzung von Produktionsanlaufprozessen durch effiziente Inbetriebnahmeprozesse
Fleischer, J.; Lanza, G.; Ender, T.; Schmalzried, S.; Giemsch, P.
2006. wt Werkstattstechnik online, 96 (9), 688 – 692
Hilfssystem unterstützt bei Messablaufplanung von Mikroteilen - Charakterisierung kleinster Strukturen
Fleischer, J.; Behrens, I.; Peters, J.; Schlipf, M.
2006. Qualität und Zuverlässigkeit, 51 (10), 87–90
A Dynamic Business-Process Based Production Ramp-up Simulation Model
Fleischer, J.; Lanza, G.; Ender, T.
2006. Production engineering, 13 (2), 107–110 197--200
Berechnung von Lebenszykluskostenverteilungen
Fleischer, J.; Wawerla, M.
2006. wt Werkstattstechnik online, 96 (10), 772–777
Einfluss von Serviceleistungen auf die Verfügbarkeit produktionstechnischer Anlagen
Fleischer, J.; Niggeschmidt, S.; Rühl, J.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (10), 561–565
Von der Diagnose zur Prognose - Kombination von Maschinendiagnose/-prognose und Benutzerführung im Störungsfall
Fleischer, J.; Schmalzried, S.; Schopp, M.
2006. Werkstatt und Betrieb, 139 (10), 81–84
Einführung eines Low-Cost_FTS in der Cockpit-Vormontage
Wieser, J.; Peter, K.; Jung, M.
2006. Logistik für Unternehmen, 20 (10), 54–55
Störungsfreier Produktionsanlauf mit ProactAS
Nyhuis, P.; Heins, M.; Fleischer, J.; Ender, T.
2006. Produktion, (10), 40
Hilfssystem unterstützt bei Messablaufplanung von Mikroteilen - Charakterisierung kleinster Strukturen
Fleischer, J.; Behrens, I.; Peters, J.; Schlipf, M.
2006. Mikroproduktion, (4), 63–64
Flexible and intelligent gripping technology for machining and handling of spatially curved extruded aluminum profiles
Lanza, G.; Fleischer, J.; Ruch, D.
2006. Advanced materials research, 10, 153–162
Effiziente Produktionsanläufe - Mit Ressourcenmanagement in eine erfolgreiche Zukunft
Fleischer, J.; Ender, T.
2006. Intelligenter Produzieren, (6), 17–18
Flexible Fertigung durch Mikrofunkenerosion
Fleischer, J.; Schmidt, J.; Haupt, S.; Halvadjiysky, G.; Quadroni, A.
2006. wt Werkstattstechnik online, 96 (11/12), 844–848
Konzept einer genauen Parallelkinematik
Munzinger, C.; Kipfmüller, M.
2006. VDI-Z integrierte Produktion, 148 (11/12), 30–33
Using Part-Specific Scales for Positioning of Spatially Curved Profiles in a Highly Flexible Clamping System
Fleischer, J.; Lanza, G.; Ruch, D.
2006. Production engineering, 13 (2), 39–42
Approach to adaptronical compensation of geometrical machine errors
Fleischer, J.; Munzinger, C.; Weis, M.
2006. Production Engineering, 13 (2), 217–220
Technische Dienstleistungsstrategien im Produktionsanlauf
Fleischer, J.; Ender, T.; Schopp, M.
2006. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 101 (12), 694–697
Life Cycle Costing im Maschinen- und Anlagenbau
Wawerla, M.; Dervisopoulos, M.; Schatka, A.; Torney, M.
2006. Industrie Management, 22 (6), 55–58
Bilanz und neue Perspektiven - Forschungs- und Entwicklungsprojekte im Bereich Life-Cycle-Performance
Fleischer, J.; Niggeschmidt, S.; Köhler, G.
2006. Instandhaltung, (12), 18–20
Simulation – Optimization of Work Piece Handling in Machine Tools
Abele, E.; Fürderer, B.; Wieser, J.
2005. Proceedings of International PACE Forum Digital Manufacturing 2005
Einflussgrößen und Randbedingungen bei der Zerspansimulation mit ABAQUS
Schermann, T.
2005. 1. Karlsruher Simulationssymposium: 30.11.2005
Simulationsgestützte Optimierung in agilen Fertigungssystemen
Fleischer, J.; Wieser, J.; Lau, C.
2005. eM-Plant Usermeeting: 14.10.2005
A Concept for the Configuration and Optimization of Global Value Added Networks Based on Business Capabilities
Fleischer, J.; Herm, M.; Peter, K.; Sternemann, K.-H.
2005. G. Reinhart & M. Zäh (Eds.), 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 05). Hrsg.: G. Reinhart, utzverlag
Simulation-Based Optimization of Work Piece Handling in Agile Manufacturing Systems
Fleischer, J.; Stepping, A.; Wieser, J.
2005. G. Reinhart & M. Zäh (Eds.), 1st International Conference on Changeable, Agile, Reconfigurable and Virtual Production (CARV 05). Hrsg.: G. Reinhart, 93–98, utzverlag
Reif für den seriellen Einsatz
Schmidt, J.; Bechle, A.
2005. VDMA-Nachrichten
Automation of the Micro-PIM-Process
Weule, H.; Fleischer, J.; Buchholz, C.
2005. Micro-Engineering Metals and Ceramics - Part I: Design, Tooling, and Injection Molding, John Wiley and Sons
Lifecycle Cost-Modelling for Machinery with Specified Availability Levels
Fleischer, J.; Nesges, D.
2005. 3rd International Conference on Reconfigurable Manufacturing: University of Michigan, Ann Arbor, USA, 10.-12. Mai 2005
Adaptronische hydrostatische Drucktascheneinheit für aktive hydrostatische Führungssysteme
Fleischer, J.; Munzinger, C.; Knödel, A.
2005. Adaptronic Congress 2005: 31. Mai–1. Juni 2005, Göttingen
Optimization of critical processes within an automated process-chain for the Micro-PIM Process
Fleischer, J.; Buchholz, C.; Weule, H.
2005. EUSPEN 2005 - Proceedings of the 5th International Conference of the European Society for Precision Engineering and Nanotechnology. Ed.: F. Chevrier
Automated process chain for the manufacturing of micro parts by powder-injection-molding
Fleischer, J.; Kotschenreuther, J.; Buchholz, C.
2005. The 38th CIRP International Seminar on Manufacturing Systems: May 16/18, 2005, Florianópolis, SC, Brazil
Parameter Optimization in Combination with Finite Element Analysis and Multi-Body-Simulation: One Way towards Better Machine Tools Design
Fleischer, J.; Broos, A.; Will, J.
2005. NAFEMS World Congress 2005: Engineering Simulation - Best Practices and Visions of the Future ; St Julians, Malta, 17th–20th May 2005
Handhabungsgerechte Werkzeugmaschinen für die künftige Serienfertigung kubischer Teile
Volkmann, T.; Wieser, J.
2005. 14. Deutscher VDI Materialfluss-Kongress: 7.–8. April 2005, Garching bei München
Meta Data as a basis for the context sensitive provision of information
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. 12th European Concurrent Engineering Conference 2005 : ECEC 2005 ; April 11 - 13, 2005, Toulouse, France. Ed.: A. Benzekri, 98–102, The European Multidisciplinary Society for Modelling and Simulation Technology (EROSIS-ETI)
A Method to configure Value Added Networks based on Business Capabilities
Fleischer, J.; Herm, M.
2005. The 38th CIRP International Seminar on Manufacturing Systems: May 16/18, 2005, Florianópolis, SC, Brazil
Prozesssichere automatisierte Produktion von hochbelastbaren Mikro-PIM-Zahnrädern
Fleischer, J.; Schlipf, M.; Dieckmann, A.-M.; Kugele, H.; Cremer, I.; Walcher, H.
2005. Mikroproduktion, 3, 50–53
Simulation von Zerspanungsprozessen mit ABAQUS
Fleischer, J.; Schmidt, C.; Schermann, T.; Marsolek, J.
2005. 17. Deutschsprachige ABAQUS-Benutzerkonferenz 2005: Tagungsband. Hrsg.: M. Knops, ABAQUS Deutschland GmbH
Simulationsunterstützte Optimierung in Agilen Fertigungssystemen
Fleischer, J.; Stepping, A.; Wieser, J.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (1-2), 32–35. doi:10.3139/104.100862
Prozessorientierte Informationsbereitstellung in produzierenden Unternehmen
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. Industrie-Management, 21 (1), 17–20
Digitaler Serienlauf beschleunigt den Markteintritt
Fleischer, J.; Nyhuis, P.; Wawerla, M.; Ender, T.; Heins, M.; Großhenning, P.
2005. Intelligenter produzieren, 36–37
OEE-Prognose im Produktionsanlauf: Simulationsbasierte Anlaufunterstützung mittels Kennzahlen
Lanza, G.; Fleischer, J.
2005. wt Werkstattstechnik online, 95 (7/8), 554–558
Simulation von qualitätskritischen Geschäftsprozessen im Produktionsanlauf
Fleischer, J.; Lanza, G.; Ender, T.
2005. 1. Karlsruher Simulationssymposium 2005, 1–20
OEE Simulation in Production Ramp-up
Fleischer, J.; Lanza, G.; Ender, T.
2005. 3rd International Industrial Simulation Conference 2005: ISC 2005 ; June 9 - 11, 2005, Berlin, Germany. Ed.: J. Krüger, 173–178
A time-variant quality prognosis ramp-up simulation model
Fleischer, J.; Lanza, G.; Ender, T.
2005. Proceedings of International PACE Forum Digital Manufacturing 2005, 1–4
Kombination der abtragenden Verfahren Funkenerosion und Laserablation zur Mikrostrukturierung
Fleischer, J.; Schmidt, J.; Haupt, S.
2005. Kolloquium Mikroproduktion: Fortschritte, Verfahren, Anwendungen. Hrsg.: U. Dilthey, 177–185, Mainz
Werkzeug- und Prozesskenngrößen zum Trocken-Räumen
Fleischer, J.; Lang, H.
2005. Spanende Fertigung: Prozesse, Innovationen, Werkstoffe. Hrsg.: K. Weinert, 51–58, Vulkan-Verlag
Automation of the Powder Injection Molding Process
Weule, H.; Fleischer, J.; Buchholz, C.
2005. Microengineering of Metals and Ceramics. Part II: Special Replication Techniques, Automation, and Properties. Ed.: D. Löhe, 451–474, Wiley-VCH Verlag
Quality Assurance and Dimensional Measurement Technology
Fleischer, J.; Behrens, I.
2005. Microengineering of Metals and Ceramics. Part II: Special Replication Techniques, Automation, and Properties. Ed.: D. Löhe, 499–519, Wiley-VCH Verlag
Modellierung und experimentelle Untersuchungen von Größeneffekten beim Stirndrehen von 90MnCrV8 in vergütetem Zustand
Kotschenreuther, J.; Delonnoy, L.; Hochrainer, T.; Weber, M.; Schmidt, J.; Fleischer, J.; Schulze, V.; Löhe, D.; Gumbsch, P.
2005. Prozessskalierung: Tagungsband des 2. Kolloquiums Prozessskalierung im Rahmen des DFG-Schwerpunktprogramms Prozessskalierung, Bremen, 9. - 10. November 2005. Hrsg.: F. Vollertsen, 219–240, Verlag BIAS
Materials Selection Process for Compound-extruded Aluminum Matrix Composites
Schulze, V.; Weidenmann, K. A.; Fleck, C.; Löhe, D.
2005. Advanced Engineering Materials, 7 (12), 1150–1155
Similarity considerations on the simulation of turning processes of steels
Delonnoy, L.; Hochrainer, T.; Schulze, V.; Löhe, D.; Gumbsch, P.
2005. International Journal of Materials Research, 96 (7), 761–769
Materials Handling Optimisation in Agile Manufacturing Systems
Fleischer, J.; Nussbaum, J.-M.; Stepping, A.; Wieser, J.
2005. EPE: European Production Engineering, 5–8
Simulationsunterstützte Optimierung im Agilen Fertigungssystem
Fleischer, J.; Stepping, A.; Wieser, J.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (1/2), 32–35
Bedarfsgerechte, prozessorientierte Informationsbereitstellung in produzierenden Unternehmen
Fleischer, J.; Herm, M.; Sternemann, K.-H.
2005. Industrie Management, 21 (1), 17–20
Digitaler Serienanlauf beschleunigt den Markteintritt. Forschung entwickelt Werkzeuge für besseren Start der Produktion
Fleischer, J.; Nyhuis, P.; Wawerla, M.; Ender, T.; Heins, M.; Großhenning, P.
2005. Intelligenter Produzieren, (1), 36–37
Service orientiert sich künftig am Lebenszyklus - Verfügbarkeit der Anlagen lässt sich kalkulieren
Fleischer, J.; Horn, W.; Bosch, R.; Nesges, D.
2005. Intelligenter Produzieren, (2), 24–25
Die Serienproduktion kann beginnen. Prozesssichere automatisierte Produktion von hoch belastbaren Mikro-PIM-Zahnrädern
Fleischer, J.; Schlipf, M.; Dieckmann, A.-M.; Kugele, H.; Cremer, I.; Walcher, H.
2005. Mikroproduktion, (3), 50–53
Aktiver Ausgleich durch Adaptronik
Fleischer, J.; Munzinger, C.
2005. WB Werkstatt + Betrieb, 138 (4), 31–34
Fabrikplanung zur Umsetzung ganzheitlicher Produktionssysteme im Wertschöpfungsnetz
Fleischer, J.; Stepping, A.; Plaggemeier, J.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (5), 279–283
Strategies for the Manufacture of Mold Inserts
Fleischer, J.; Buchholz, C.; Kotschenreuther, J.
2005. Microengineering of metals and ceramics: design, tooling and injection molding. Ed.: D. Löhe, 87–106, Wiley-VCH Verlag. doi:10.1002/9783527616725.ch4
Die Reifeprüfung. Eine Reifekennzahl ergänzt die Leistungskennzahlen im Produktionsanlauf
Fleischer, J.; Ender, T.; Wagner, M.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (5), 261–265
High Performance Broaching
Fleischer, J.; Nesges, D.
2005. Production Engineering, 12 (1), 143–146
Enhancing Operational Availability by Harmonization of Equipment Elements with Product-accompanying Services
Fleischer, J.; Nesges, D.
2005. Production Engineering, 12 (1), 193–196
Quality Assurance in Micro Production - Chances and Challenges
Fleischer, J.; Behrens, I.
2005. Proceedings of the 5th international conference of the European Society for Precision Engineering and Nanotechnology, May 8th - May 11th 2005, Montpellier, France. Ed.: F. Chevrier, 687–690, Montpellier
Life-Cycle-Performance, partnerschaftlich zum Ziel
Fleischer, J.; Weismann, U.; Schmalzried, S.; Wawerla, M.
2005. WB Werkstatt + Betrieb, 138 (5), 75–78
Mit der Simulation schneller am Markt - CA-Techniken helfen bei der Optimierung von Fertigungseinrichtungen
Broos, A.; Melchinger, A.; Schmitz, E.
2005. Intelligenter Produzieren, (3), 17–18
Wärmeeintrag bei der Trockenbearbeitung
Fleischer, J.; Schmidt, J.; Pabst, R.
2005. WB Werkstatt + Betrieb, 138 (6), 43–46
Berechnung von Kompensationsdateien aus der Untersuchung der wirkstellennahen Positionsmessung
Fleischer, J.; Munzinger, C.; Kipfmüller, M.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (7/8), 401–405
Projektmanagement in der Fabrikplanung
Fleischer, J.; Stepping, A.; Peychal-Heiling, A.
2005. wt Werkstattstechnik online, 95 (7/8), 569–573
Bewertung der Life-Cycle-Performance - Eine Methode zum lebenszyklusorientierten Angebotsvergleich bei produktionstechnischen Anlagen
Fleischer, J.; Weismann, U.; Schmalzried, S.; Wawerla, M.
2005. wt Werkstattstechnik online, 95 (7/8), 559–563
OEE-Prognose im Produktionsanlauf. Simulationsgestützte Anlaufunterstützung mittels Kennzahlen
Lanza, G.; Fleischer, J.
2005. wt Werkstattstechnik online, 95 (7/8), 554–558
Zerspanungssimulation optimiert Produktionsabläufe
Fleischer, J.; Schmidt, J.; Schmidt, C.; Schermann, T.
2005. VDI-Z Integrierte Produktion, 147 (II), 63–65
Robotergestütztes fliegendes Trennen verbundverstärkter Profile
Fleischer, J.; Kies, S.; Stengel, G.
2005. wt Werkstattstechnik online, 95 (9), 661–665
Berechnung und Optimierung eines neuartigen Werkzeugmaschinenkonzepts zur Bearbeitung dreidimensional gerundeter Profile
Fleischer, J.; Kies, S.; Munzinger, C.; Tröndle, M.; Schmidt-Ewig, J. P.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (9), 502–506
Innovative Machine Kinematics for Combined Handling and Machining of Three-Dimensional Curved Lightweight Extrusion Structures
Fleischer, J.; Schmidt-Ewig, J. P.
2005. CIRP Annals - Manufacturing Technology, 54 (1), 317–320
Komfortabel, sicher, leistungsfähig, umweltfreundlich: Das Auto der Zukunft
Fleischer, J.; Biehl, M.; Schick, M.
2005. Forschen in Baden-Württemberg, 30–31, Ministerium für Wissenschaft
Reif für den industriellen Einsatz
Schmidt, J.; Bechle, A.
2005. VDMA-Nachrichten, 58
Wege zur produktiveren Fertigung
Fleischer, J.; Nussbaum, J.; Wieser, J.
2005. VDI-Z Integrierte Produktion, 147 (9), 46–50
Prozessinnovation durch prozessbasierte Qualitätsprognose im Produktionsanlauf
Fleischer, J.; Lanza, G.; Ender, T.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (9), 510–516. doi:10.3139/104.100935
Einsatz der Adaptronik am Beispiel hydrostatischer Führungen - Intelligente Niveauregulierung mittels adaptronischer Drucktascheneinheit
Fleischer, J.; Knödel, A.; Munzinger, C.
2005. O+P Ölhydraulik und Pneumatik, 49 (9), 555–557
Business Capabilities als Basis fähigkeitsorientierter Konfigurationen
Fleischer, J.; Herm, M.; Homann, U.; Peter, K.; Sternemann, K.-H.
2005. ZWF Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (10), 553–557
Adaptronische hydrostatische Drucktascheneinheit
Fleischer, J.; Munzinger, C.; Knödel, A.
2005. wt Werkstattstechnik online, 95 (10), 809
Automatisiertes konturflexibles Greifen 3D-gekrümmter Profile
Fleischer, J.; Ruch, D.
2005. VDI-Z Integrierte Produktion, 147 (10), 70–71
Im Wälzschälen steckt viel Potenzial
Fleischer, J.; Schmidt, J.; Bechle, A.
2005. WB Werkstatt + Betrieb, 138 (10), 44–48
Entformkraftuntersuchung beim Micro-PIM-Prozess
Fleischer, J.; Dieckmann, A.-M.
2005. wt Werkstattstechnik online, 95 (11/12), 892–897
Structural Optimization of Machine Tools under Consideration of their Static and Dynamic Behavior within the Workspace
Fleischer, J.; Weule, H.; Neithardt, W.; Broos, A.; Schmidt-Ewig, J.-P.; Minx, J.
2005. Production Engineering, 12 (2), 201–204
Simulationsunterstützte Wirkbeziehungsanalyse im Produktionsanlauf – Ein Prognosesystem mit Materialfluss- und Qualitätssimulation
Nyhuis, P.; Heins, M.; Großhenning, P.; Fleischer, J.; Lanza, G.; Ender, T.
2005. Zeitschrift für wirtschaftlichen Fabrikbetrieb, 100 (12), 746–751. doi:10.3139/104.100981
Mikroformeinsätze in gehärteten Stählen
Fleischer, J.; Schmidt, J.; Haupt, S.; Halvadjiysky, G.; Kotschenreuther, J.
2005. wt Werkstattstechnik online, 95 (11/12), 887–891
Kugelgewindetriebe mit hohem Druckwinkel. PhD dissertation
Dambacher, U.
2005. Universität Karlsruhe (TH)
2-D FEM simulation of chip formation and estimation of tool wear in continous orthogonal cutting
Schmidt, J.; Xie, L.; Biesinger, F.
2005. Wear, 258 (10), 1479–1490
Parameteroptimierung bei Werkzeugmaschinen - Anwendungsmöglichkeiten und Potentiale
Fleischer, J.; Broos, A.
2004. Weimarer Optimierungs-und Stochastiktage 1.0: 2.–3. Dezember 2004
TCO - Prognose bei einem Werkzeugmaschinenhersteller
Bechle, A.
2004. Im: Tagungsband der Herbsttagung "Life-Cycle-Performance". Hrsg. Jürgen Fleischer, wbk Institut für Produktionstechnik