Florian Sauer, M.Sc.
- Research Associate
- department: Manufacturing and Materials Technology
- office hours: to be agreed
- room: 104, Geb. 10.92
- phone: +49 1523 950 2592
- Florian Sauer ∂does-not-exist.kit edu
76131 Karlsruhe
Kaiserstraße 12
Florian Sauer, M.Eng.
Projects:
-
DFG SPP2231 - Multi-scale numerical modeling and optimization of the effect of the cooling lubricant when skiving
Curriculum Vitae:
|
since 09/2020 |
Research Associate at the Institute of Production Science (wbk) at Karlsruhe Institute of Technology (KIT) |
|
03/2019-08/2020 |
Test engineer at Trelleborg Sealing Solutions |
|
09/2017-02/2019 |
Master’s degree: Product development and production at the University of applied sciences Aalen |
|
09/2013-08/2017 |
Bachelor’s degree: Mechanical engineering: specialization in production at the University of applied sciences Mannheim |
|
09/2009-06/2012 |
Apprenticeship as an industrial mechanic |
Publications
Insights into the metal cutting contact zone through automation and multivariate regression modelling under the framework of gear skiving
Sauer, F.; Mukherjee, A.; Schulze, V.
2025. Simulation Modelling Practice and Theory, 142, 103107. doi:10.1016/j.simpat.2025.103107
Sauer, F.; Mukherjee, A.; Schulze, V.
2025. Simulation Modelling Practice and Theory, 142, 103107. doi:10.1016/j.simpat.2025.103107
Multiscale Parametrization Of a Friction Model For Metal Cutting Using Contact Mechanics, Atomistic Simulations, And Experiments
Holey, H.; Sauer, F.; Ganta, P. B.; Mayrhofer, L.; Dienwiebel, M.; Schulze, V.; Moseler, M.
2024. Tribology Letters, 72 (4), 113. doi:10.1007/s11249-024-01906-9
Holey, H.; Sauer, F.; Ganta, P. B.; Mayrhofer, L.; Dienwiebel, M.; Schulze, V.; Moseler, M.
2024. Tribology Letters, 72 (4), 113. doi:10.1007/s11249-024-01906-9
Reproducibility analysis for different numerical models and experimental setups in dry orthogonal cutting of AISI 4140 steel
Grimm, C.; Menze, C.; Saelzer, J.; Sauer, F.; Eisseler, R.; Möhring, H.-C.; Volker, S.; Andreas, Z.; Uhlmann, E.
2024. CIRP Design Conference 2024, 128, 650–655. doi:10.1016/j.procir.2024.04.018
Grimm, C.; Menze, C.; Saelzer, J.; Sauer, F.; Eisseler, R.; Möhring, H.-C.; Volker, S.; Andreas, Z.; Uhlmann, E.
2024. CIRP Design Conference 2024, 128, 650–655. doi:10.1016/j.procir.2024.04.018
Development of an Analytical Model for Correlation with Workpiece Roughness in Stream Finishing using a LiDar Sensor
Sauer, F.; Neuenfeldt, P.; González, G.; Schulze, V.
2024. Procedia CIRP, 123, 238–243. doi:10.1016/j.procir.2024.05.043
Sauer, F.; Neuenfeldt, P.; González, G.; Schulze, V.
2024. Procedia CIRP, 123, 238–243. doi:10.1016/j.procir.2024.05.043
Multiscale simulation approach to predict the penetration depth of oil between chip and tool during orthogonal cutting of AISI 4140
Sauer, F.; Codrignani, A.; Haber, M.; Falk, K.; Mayrhofer, L.; Schwitzke, C.; Moseler, M.; Bauer, H.-J.; Schulze, V.
2023. (P. D.-I. P. D. B. Prof. Dr.-Ing. habil. Volker Schulze, Ed.) 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Prof. Dr.-Ing. habil. Volker Schulze, Prof Dr-Ing Prof Dirk Biermann, 117, 426–431. doi:10.1016/j.procir.2023.03.072
Sauer, F.; Codrignani, A.; Haber, M.; Falk, K.; Mayrhofer, L.; Schwitzke, C.; Moseler, M.; Bauer, H.-J.; Schulze, V.
2023. (P. D.-I. P. D. B. Prof. Dr.-Ing. habil. Volker Schulze, Ed.) 19th CIRP Conference on Modeling of Machining Operations Hrsg.: Prof. Dr.-Ing. habil. Volker Schulze, Prof Dr-Ing Prof Dirk Biermann, 117, 426–431. doi:10.1016/j.procir.2023.03.072
Effect of thermomechanical loads and nanocrystalline layer formation on induced surface hardening during orthogonal cutting of AISI 4140
González, G.; Sauer, F.; Plogmeyer, M.; Gerstenmeyer, M.; Bräuer, G.; Schulze, V.
2022. Procedia CIRP, 108, 228–233. doi:10.1016/j.procir.2022.03.040
González, G.; Sauer, F.; Plogmeyer, M.; Gerstenmeyer, M.; Bräuer, G.; Schulze, V.
2022. Procedia CIRP, 108, 228–233. doi:10.1016/j.procir.2022.03.040
Tool wear development in gear skiving of different quenched and tempered steels
Sauer, F.; Schulze, V.; Arndt, T.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1331–1343, VDI Verlag
Sauer, F.; Schulze, V.; Arndt, T.
2022. International Conference on Gears 2022, 4th International Conference on High Performance Plastic Gears 2022, 4th International Conference on GearProduction 2022: Garching/Munich, Germany, September 12-14, 2022, 1331–1343, VDI Verlag
Evaluation of methods for measuring tool-chip contact length in wet machining using different approaches (microtextured tool, in-situ visualization and restricted contact tool)
Ellersiek, L.; Menze, C.; Sauer, F.; Denkena, B.; Möhring, H.-C.; Schulze, V.
2022. Production Engineering, 16 (5), 635–646. doi:10.1007/s11740-022-01127-w
Ellersiek, L.; Menze, C.; Sauer, F.; Denkena, B.; Möhring, H.-C.; Schulze, V.
2022. Production Engineering, 16 (5), 635–646. doi:10.1007/s11740-022-01127-w
Temperaturverteilung beim Wälzschälen : Experimentelle/ Simulative Untersuchung der Temperaturverteilungen an der Schneide beim Wälzschälen = Temperature distribution during power skiving
Sauer, F.; Gerstenmeyer, M.; Schulze, V.
2021. WT Werkstattstechnik, 111 (11-12), 786–791. doi:10.37544/1436-4980-2021-11-12-16
Sauer, F.; Gerstenmeyer, M.; Schulze, V.
2021. WT Werkstattstechnik, 111 (11-12), 786–791. doi:10.37544/1436-4980-2021-11-12-16