Niki Nouri, M. Sc.
- Oberingenieurin Cutting
- Bereich: Fertigungs- und Werkstofftechnik
- Sprechstunden: nach Vereinbarung
- Raum: 103, Geb. 10.92
- Tel.: +49 1523 9502581
- niki nouri ∂does-not-exist.kit edu
- www.linkedin.com/in/niki-nouri
76131 Karlsruhe
Kaiserstraße 12
Niki Nouri, M. Sc.
Dissertation:
- Untersuchung der Umwandlungsplastizität bei der Ausscheidungsbildung während des Anlassens bei Vergütungsstählen und martensitaushärtenden Stählen
Lebenslauf:
|
seit 05/2026 |
Gruppenleiterin Cutting am Institut für Produktionstechnik (wbk) des Karlsruher Instituts für Technologie (KIT) |
|
06/2020-04/2026 |
Wissenschaftliche Mitarbeiterin am Institut für Angewandte Materialien – Werkstoffkunde (IAM-WK) des Karlsruher Instituts für Technologie (KIT) |
|
10/2017-03/2020 |
Masterstudium des Maschinebaus am Karlsruher Institut für Technologie (KIT) |
|
09/2015-10/2019 |
Masterstudium des Maschinebaus an der École Nationale Supérieure d’Arts et Métiers (ENSAM) |
|
10/2013-09/2017 |
Bachelorstudium des Maschinebaus am Karlsruher Institut für Technologie (KIT) |
Veröffentlichungen
Processing Optimization of the New Steel Grade 45SiCrV9Ni for Modern Leaf Springs in Battery Electric Vehicles
Nouri, N.; Escauriaza, B.; Gakias, C.; Savaidis, G.; Elvira, R.; Dietrich, S.; Schulze, V.
2026. Engineering Proceedings, 52, MDPI. doi:10.3390/engproc2025119052
Nouri, N.; Escauriaza, B.; Gakias, C.; Savaidis, G.; Elvira, R.; Dietrich, S.; Schulze, V.
2026. Engineering Proceedings, 52, MDPI. doi:10.3390/engproc2025119052
Influence of Tempering Transformation Induced Plasticity (T-TRIP) on the Evolution of Residual Stresses in Laser Heat Treated 50CrMo4 Steel
Nouri, N.; Lapouge, P.; Dirrenberger, J.; Dietrich, S.; Schulze, V.
2025. QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering, 42–50, ASM International. doi:10.31399/asm.cp.qde2025p0042
Nouri, N.; Lapouge, P.; Dirrenberger, J.; Dietrich, S.; Schulze, V.
2025. QDE 2025: Proceedings of the 3rd International Conference on Quenching and Distortion Engineering, 42–50, ASM International. doi:10.31399/asm.cp.qde2025p0042
Transformation induced plasticity (TRIP) due to precipitation during continuous tempering of quenched and tempered steels
Nouri, N.; Hillenmeyer, E.; Thavarajan, T.; Dietrich, S.; Schulze, V.
2025. Journal of Materials Research and Technology, 34, 730–737. doi:10.1016/j.jmrt.2024.12.042
Nouri, N.; Hillenmeyer, E.; Thavarajan, T.; Dietrich, S.; Schulze, V.
2025. Journal of Materials Research and Technology, 34, 730–737. doi:10.1016/j.jmrt.2024.12.042
Tailored Hardness Profiles Through a Combination of Specialized PBF-LB Processing Strategies with Subsequent Heat Treatment for Graded High-Strength Components Made of Maraging Steel
Nouri, N.; Graf, G.; Sen, S.; Schulze, V.; Dietrich, S.
2024. Netsu-shori = Heat treatment, 64, 17–22. doi:10.14940/netsushori.64.ex17
Nouri, N.; Graf, G.; Sen, S.; Schulze, V.; Dietrich, S.
2024. Netsu-shori = Heat treatment, 64, 17–22. doi:10.14940/netsushori.64.ex17
Characterization of Martensitic-Bainitic Mixed Microstructures Created by Inductive Short Time Austempering of AISI 4140
Dollhofer, B.; Krämer, C.; Nouri, N.; Dietrich, S.; Schulze, V.
2024. Proceedings of the 29th International Federation for Heat Treatment and Surface Engineering World Congress (IFHTSE 2024), 41–49, ASM International. doi:10.31399/asm.cp.ifhtse2024p0041
Dollhofer, B.; Krämer, C.; Nouri, N.; Dietrich, S.; Schulze, V.
2024. Proceedings of the 29th International Federation for Heat Treatment and Surface Engineering World Congress (IFHTSE 2024), 41–49, ASM International. doi:10.31399/asm.cp.ifhtse2024p0041
Transformation Induced Plasticity during Precipitation Strengthening of Maraging Steels
Nouri, N.; Dietrich, S.; Schulze, V.
2024. Proceedings of the 29th International Federation for Heat Treatment and Surface Engineering World Congress (IFHTSE 2024), 50–56, ASM International. doi:10.31399/asm.cp.ifhtse2024p0050
Nouri, N.; Dietrich, S.; Schulze, V.
2024. Proceedings of the 29th International Federation for Heat Treatment and Surface Engineering World Congress (IFHTSE 2024), 50–56, ASM International. doi:10.31399/asm.cp.ifhtse2024p0050
Comparison of Hardness and Residual Stresses in Multiline Laser Surface Hardening and Induction Hardening
Schüßler, P.; Nouri, N.; Lapouge, P.; Dietrich, S.; Schulze, V.
2024. Netsu-shori = Heat treatment / Nihon netsu shori gijutsu kyōkai, 64, 72–77. doi:10.14940/netsushori.64.ex72
Schüßler, P.; Nouri, N.; Lapouge, P.; Dietrich, S.; Schulze, V.
2024. Netsu-shori = Heat treatment / Nihon netsu shori gijutsu kyōkai, 64, 72–77. doi:10.14940/netsushori.64.ex72
Characterization of phase transformation and strengthening mechanisms in a novel maraging steel produced using laser-based powder bed fusion
Nouri, N.; Li, Q.; Schneider, R.; Damon, J.; Schüßler, P.; Laube, S.; Müller, E.; Graf, G.; Schulze, V.; Dietrich, S.
2024. Materials Characterization, 207, 113522. doi:10.1016/j.matchar.2023.113522
Nouri, N.; Li, Q.; Schneider, R.; Damon, J.; Schüßler, P.; Laube, S.; Müller, E.; Graf, G.; Schulze, V.; Dietrich, S.
2024. Materials Characterization, 207, 113522. doi:10.1016/j.matchar.2023.113522
High cycle fatigue behaviour of AISI 4140 steel manufactured by laser-powder bed fusion
Shi, C.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. International Journal of Fatigue, 168, Article no: 107469. doi:10.1016/j.ijfatigue.2022.107469
Shi, C.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. International Journal of Fatigue, 168, Article no: 107469. doi:10.1016/j.ijfatigue.2022.107469
Tailored Hardness Profiles Through a Combination of Specialized PBF-LB Processing Strategies with Subsequent Heat Treatment for Graded High-Strength Components Made of Maraging Steel
Nouri, N.; Graf, G.; Dietrich, S.; Schulze, V.
2023. 28th Congress of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2023, International Federation for Heat Treatment and Surface Engineering (IFHTSE)
Nouri, N.; Graf, G.; Dietrich, S.; Schulze, V.
2023. 28th Congress of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2023, International Federation for Heat Treatment and Surface Engineering (IFHTSE)
Comparison of Hardness and Residual Stresses in Multiline Laser Surface Hardening and Induction Hardening
Schüßler, P.; Nouri, N.; Dietrich, S.; Schulze, V.
2023. 28th Congress of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2023, International Federation for Heat Treatment and Surface Engineering (IFHTSE)
Schüßler, P.; Nouri, N.; Dietrich, S.; Schulze, V.
2023. 28th Congress of the International Federation for Heat Treatment and Surface Engineering, IFHTSE 2023, International Federation for Heat Treatment and Surface Engineering (IFHTSE)
A novel multiscale process simulation to predict the impact of intrinsic heat treatment on local microstructure gradients and bulk hardness of AISI 4140 manufactured by laser powder bed fusion
Schüßler, P.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. Virtual and Physical Prototyping, 18 (1), Art.-Nr.: e2271455. doi:10.1080/17452759.2023.2271455
Schüßler, P.; Nouri, N.; Schulze, V.; Dietrich, S.
2023. Virtual and Physical Prototyping, 18 (1), Art.-Nr.: e2271455. doi:10.1080/17452759.2023.2271455
Characterization of a Novel Maraging Steel for Laser-Based Powder Bed Fusion: Optimization of Process Parameters and Post Heat Treatments
Nouri, N.; Li, Q.; Damon, J.; Mühl, F.; Graf, G.; Dietrich, S.; Schulze, V.
2022. Journal of Materials Research and Technology, 18, 931–942. doi:10.1016/j.jmrt.2022.02.126
Nouri, N.; Li, Q.; Damon, J.; Mühl, F.; Graf, G.; Dietrich, S.; Schulze, V.
2022. Journal of Materials Research and Technology, 18, 931–942. doi:10.1016/j.jmrt.2022.02.126
Dual-Laser PBF-LB Processing of a High-Performance Maraging Tool Steel FeNiCoMoVTiAl
Graf, G.; Nouri, N.; Dietrich, S.; Zanger, F.; Schulze, V.
2021. Materials, 14 (15), Art.-Nr.: 4251. doi:10.3390/ma14154251
Graf, G.; Nouri, N.; Dietrich, S.; Zanger, F.; Schulze, V.
2021. Materials, 14 (15), Art.-Nr.: 4251. doi:10.3390/ma14154251